| Age | Commit message (Collapse) | Author |
|---|
|
The last user of the NEEDS_MANUAL_RELOC has been removed in commit
26af162ac8f8 ("arch: m68k: Implement relocation")
Remove now unused NEEDS_MANUAL_RELOC code.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Adds a command called "gpt transpose" which will swap the order two
partition table entries in the GPT partition table (but leaves them
pointing to the same locations on disk).
This can be useful for swapping bootloaders in systems that use an A/B
partitioning scheme where the bootrom is hard coded to look for the
bootloader in a specific index in the GPT partition table.
Signed-off-by: Joshua Watt <[email protected]>
|
|
Adds a command that can be used to modify the GPT partition table to
indicate which partitions should have the bootable flag set
Signed-off-by: Joshua Watt <[email protected]>
|
|
Adds an additional variable called gpt_partition_bootable that indicates
if the given partition is bootable or not.
Signed-off-by: Joshua Watt <[email protected]>
|
|
Add base documentation for BeaglePlay
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Prepare v2023.10-rc4
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Adds initial documentation for the gpt command
Signed-off-by: Joshua Watt <[email protected]>
|
|
Fix up build step numbering.
Fixes: 4bf49bade124 ("doc: board: ti: am64: Add boot flow diagram")
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Provide alternative text for image.
Fixes: 4bf49bade124 ("doc: board: ti: am64: Add boot flow diagram")
Reported-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Now with the update U-Boot wrappers having been sorted out, document
their usage.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
- Update SPDX-License-Identifier from obsolete GPL-2.0+ to
GPL-2.0-or-later.
- Add links to product websites of SoM and carrier board where missing.
- Add information about update U-Boot wrapper where missing.
- Add sectionauthor where missing.
- Update information about imx-seco from version 3.7.4 to 3.8.1.
- Various minor grammatic and spelling fixes.
- Improve whitespace by adding or removing new lines.
- Change from code-block for output to just Output::.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Add the events.h include to the API documentation.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Now that we have two types of spy, mention this in the documentation. Put
the simple spy first, since it seems to be the common case.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the document to specify how the EFI Signature List(ESL) file
can be embedded into the platform's dtb as part of the U-Boot build.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
The EFI capsules can now be generated as part of U-Boot build, through
binman. Highlight these changes in the documentation.
Signed-off-by: Sughosh Ganu <[email protected]>
Acked-by: Heinrich Schuchardt <[email protected]>
|
|
The existing distro scripts check extlinux and scripts before EFI. Adjust
the default ordering to do the same, to avoid breaking existing flows.
Add some documentation, mentioning that this order will likely change in
future.
Signed-off-by: Simon Glass <[email protected]>
Reported-by: Da Xue <[email protected]>
|
|
This is a stub describing how TPL, VPL, and SPL load the next boot stages
on a detail level for users.
For sure we will need a few patches on top to catch the whole complexity.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
Sphinx-prompt provides a handy scheme to provide documentation that
renders nicely and yet provides a scheme to copy paste for users without
having to hand-edit the copied text as is the result of code-block
[1] https://lore.kernel.org/all/[email protected]/
Reported-by: Simon Glass <[email protected]>
Suggested-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Sphinx-prompt[1] helps bring-in '.. prompt::' option that allows a
better rendered documentation, yet be able to copy paste without
picking up the prompt from rendered documentation.
[1] https://lore.kernel.org/all/[email protected]/
Suggested-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Signed-off-by: Sumit Garg <[email protected]>
Use code-block. Fix length of two heading underlines.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Some bootmeths support scanning a partition without a filesystem on it.
Add a flag to support this.
This will allow the ChromiumOS bootmeth to find kernel partition, which
are stored in a special format, without a filesystem.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add mention of persistent settings in the documentation.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a command to read edit settings from CMOS RAM, using the cedit
definition to indicate which registers and bits are used.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a command to write cedit settings to CMOS RAM so that it can be
preserved across a reboot. This uses a simple bit-encoding, where each
field has a 'bit position' and a 'bit length' in the schema.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a command to read cedit settings from environment variables so that
they can be restored as part of the environment.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a command to write cedit settings to environment variables so that
they can be stored with 'saveenv'.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a command to read cedit settings from a devicetree file.
Signed-off-by: Simon Glass <[email protected]>
|
|
Support writing settings from an expo into a file in FDT format. It
consists of a single node with a two properties for each sceneitem,
one with tag ID chosen by the user and another for its text value.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a little information about each subcommand.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is related to standard boot, so put it under the same node. This may
simplify schema upstreaming later.
Mention themes in the documentation while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is mentioned in passing in the 'cedit' command. Its file format is
described under `expo`. But it would be better if it had its own entry
in the documentation.
Add a new 'cedit' entry with a few details about this feature.
Signed-off-by: Simon Glass <[email protected]>
|
|
Tidy up this tool a little:
- define which arguments are needed
- split the enum values out into a header file
- warn if no enum values are found
- display the dtc error if something goes wrong
- avoid a Python traceback on error
Signed-off-by: Simon Glass <[email protected]>
|
|
Add an example qemu-system-aarch64 command that can make U-Boot on QEMU
boot into the Debian Installer, along with resulting console messages
from U-Boot, based on the existing documentation section for the x86
version.
Signed-off-by: Alper Nebi Yasak <[email protected]>
|
|
Commit 02be57caf730 ("riscv: qemu: Enable usb keyboard as an input
device") adds PCI xHCI support to QEMU RISC-V virtual machines and
enables using a USB keyboard as one of the input devices. Similarly,
enable those for ARM virtual machines as well.
Signed-off-by: Alper Nebi Yasak <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Commit 716161663ec49 ("riscv: qemu: Enable Bochs video support") enables
a video console for QEMU RISC-V virtual machines using an emulated Bochs
VGA card. Similarly, enable it for ARM virtual machines as well.
Signed-off-by: Alper Nebi Yasak <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
The list of u-boot talks on elinux.org is quite long, so let's highlight
the talks which are likely most relevant for newcomers.
Signed-off-by: Paul Barker <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Highlight the packages which need to be installed in order to build the
docs.
Signed-off-by: Paul Barker <[email protected]>
|
|
The configuration for EFI is enhanced to start U-Boot at VirtualBox (x86_64)
with all features like booting with help of boot scripts and extended linux.
This documentation describes how to use U-Boot at VirtualBox to boot
Linux systems with a some simple example.
Signed-off-by: Thomas Mittelstaedt <[email protected]>
|
|
Fix minor path and config macro name updates to sync with latest
OpenOCD and U-Boot configurations.
Fixes: effe50854a69 ("doc: board: ti: k3: Add a guide to debugging with OpenOCD")
Signed-off-by: Jonathan Humphreys <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Add elaboration text for the various firmware involved for system
management.
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Fix up build step numbering.
Fixes: c727b81d6530 ("doc: board: ti: k3: Reuse build instructions")
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Fix up build step numbering.
Fixes: c727b81d6530 ("doc: board: ti: k3: Reuse build instructions")
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Fix up build step numbering.
Fixes: c727b81d6530 ("doc: board: ti: k3: Reuse build instructions")
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Fix up build step numbering.
Fixes: c727b81d6530 ("doc: board: ti: k3: Reuse build instructions")
Signed-off-by: Nishanth Menon <[email protected]>
Revieed-by: Heinrich Schuchardt <[email protected]>
|
|
Provide alternative text for image.
Fixes: 3b83dff183b5 ("doc: board: ti: j721e: Convert the image format to svg")
Reported-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Provide alternative text for image.
Fixes: f4ade09a1e76 ("doc: board: ti: j7200: Convert the image format to svg")
Reported-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Provide alternative text for image.
Fixes: fd358121bdb8 ("doc: board: ti: am65x: Update with boot flow diagram")
Signed-off-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Provide alternative texts for images.
Fixes: 34f76921d801 ("doc: board: ti: am62x: Convert the image format to svg")
Signed-off-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Fix up OpenOCD setup sequence
Fixes: effe50854a69 ("doc: board: ti: k3: Add a guide to debugging with OpenOCD")
Reported-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
|
