| Age | Commit message (Collapse) | Author |
|---|
|
Add initial board docs for Milk-V Mars CM (eMMC) and Milk-V Mars CM Lite
(SD Card) to the visionfive2 board target.
Signed-off-by: E Shattow <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
For clarity, add a reference link to the start of the section on command
documentation that all commands follow some general rules.
Signed-off-by: Tom Rini <[email protected]>
|
|
Make use of the glob syntax to automatically include all command
documents.
Signed-off-by: Tom Rini <[email protected]>
|
|
With the addition of general text about how the return value is handled,
reference that while retaining the additional information about setting
$seama_image_size
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
With the addition of general text about how the return value is handled,
remove the examples from the askenv documentation as they are all normal
expected results.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
For nearly all commands in U-Boot the '?' variable is handled the same
way with 0 meaning success, 1 meaning any failure. Explain this in the
general rules section of the cmdline documentation (with a link to a
counter example) and then remove the redundant wording from most
commands. We retain a section about the return value in a number of
places where we are doing something such as always returning a specific
value or we have useful additional information to go along with the
normal return codes.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
The given qemu examples use true/false, while qemu actually on/off.
Signed-off-by: Wolfgang Wallner <[email protected]>
|
|
Fix the whitespace and add a missing quotation mark
(default = "foo-reva.dtb") in overlay-fdt-boot.rst.
Signed-off-by: Wolfgang Wallner <[email protected]>
|
|
Fix typos/wording in various files in doc/.
Signed-off-by: Wolfgang Wallner <[email protected]>
Reviewed-by: E Shattow <[email protected]>
|
|
* Avoid two step navigation to get to the description of the write command.
* Add missing index entries
* Correct formatting of the examples.
* Describe configuration and return value.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add the option to load the bootscript with the tftp command (static IP)
instead of the dhcp command (dynamic IP). For this a new function
tftpb_run similar to dhcp_run, is needed. The selection of which command
to use can be done with the ip_dyn environment variable, which can be
set to yes or no. The ip_dyn variable was chosen as it is already in use
on the imx platforms.
Also edit the bootstd doc.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Benjamin Hahn <[email protected]>
|
|
When there are no more bootdevs we should still go through the global
bootmeths, since some may not have yet been used, if their priority has
not yet come up.
Add a final check for this at the end of the iterator.
Update the documentation to match the new behaviour of global bootmeths.
Signed-off-by: Simon Glass <[email protected]>
|
|
Fix typo: "weays" -> "ways"
Signed-off-by: Beiyan Yun <[email protected]>
|
|
A few lines of code being guarded by the CONFIG_TFTP_PORT option seems
an unnecessary restriction on the TFTP support provided by a vanilla
U-Boot image. In cases where the TFTP server cannot run as superuser -
and hence cannot run on the well-known port 69 - this quirk incurs a
full reconfiguration and rebuild of the bootloader only in order to
select the appropriate destination port.
Remove the CONFIG_TFTP_PORT option entirely and make the tftpdstp and
tftpsrcp variables always have an effect. Their being unset will mean
that U-Boot behaves the same as if CONFIG_TFTP_PORT was unset. Update
the documentation accordingly. And fix up the single board which was
originally enabling this option.
Signed-off-by: Alvin Šipraga <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
The j722s_evm support is now largely complete and is certainly
not limited to UART boot so drop the confusing note from the docs.
Signed-off-by: Peter Robinson <[email protected]>
|
|
Architecture-specific documentation in the Linux kernel was moved to
the arch/ subdirectory.
Signed-off-by: Mattia Narducci <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Fix two typos in the sandbox docs.
Signed-off-by: Lukas Zirpel <[email protected]>
Cc: Simon Glass <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
This explains how
to use the new U-Boot command 'dmareset'.
Signed-off-by: Brian Sune <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Add more bootloading details for E850-96 board. New sections cover next
topics:
- Hardware configuration of the boot device
- Flashing and updating the software (multiple methods)
- Booting with Standard Boot (multiple methods)
- EFI System Partition structure for E850-96
- Loadable firmware (LDFW) note
- Ethernet and USB Host Support
That documents all recently enabled U-Boot features for E850-96, which
can hopefully make U-Boot more useful for the users and developers of
this platform.
Signed-off-by: Sam Protsenko <[email protected]>
|
|
The documentation of bootmeth rauc in some aspects does not reflect the
real program flow. Specifically the reset of boot tries in case of "no
more slots found" is incorrect (it won't change BOOT_ORDER).
Also the search sequence for boot scripts was mixed and incomplete.
Fix these points in the documentation.
Explain the initial setup of any missing BOOT_ORDER and BOOT_x_LEFT
environment variables, and inform about BOOT_x_LEFT decrementing.
Signed-off-by: Andreas Pretzsch <[email protected]>
Reviewed-by: Martin Schwan <[email protected]>
|
|
This resyncs us with the version found in v6.17 of the Linux kernel with
the following exceptions:
- Keep our u-boot specific tests / code area.
- Keep the location of our checkpatch.rst
- Change the "use strscpy" test as we don't have that to strlcpy
- Keep debug/printf in the list for $logFunctions
- Keep checks to "env" files
- Keep our tests for strncpy/strncat
This also syncs the spdxcheck.py tool and all the associated
documentation.
Signed-off-by: Kory Maincent <[email protected]>
[trini: Keep our strlcpy/cat check]
Signed-off-by: Tom Rini <[email protected]>
|
|
Merge the outstanding changes from the 'next' branch to master.
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
While we continue to have some systems which support extremely legacy
OS booting methods, we do not have use cases for supporting this in
Falcon mode anymore. Remove this support and references from the
documentation.
Co-developed-by: Anshul Dalal <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Mainly fix inline code and some other formatting mistakes. Inline code
uses double backticks `` in reStructuredText instead of single backticks
as in Markdown.
Also fix some smaller formatting issues, such as excess colons before
literal blocks.
Signed-off-by: Martin Schwan <[email protected]>
|
|
Replace references to patman with b4 as the recommended tool for
preparing and sending patches. b4 is widely adopted in the Linux kernel
community and U-Boot ships with configuration to simplify its use with
the project mailing list.
The updated guidelines describe how to prepare series with b4, handle
cover letters and recipient lists, run style checks, and send patches
safely. Instructions also highlight how to collect and apply review tags
before resending.
This change documents the preferred workflow for contributors and
ensures consistency with common practices across related upstream
communities.
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Javier Tia <[email protected]>
|
|
Signed-off-by: Yegor Yefremov <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-socfpga into next
SoCFPGA updates for v2025.10:
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/27762
This pull request brings a set of updates across SoCFPGA platforms
covering Agilex5, Agilex7, N5X, and Stratix10. The changes include:
* Agilex5 enhancements:
- USB3.1 enablement and DWC3 host driver support
- System Manager register configuration for USB3
- Watchdog timeout increase and SDMMC clock API integration
- dcache handling improvements in SMC mailbox path
- Enable SPL_SYS_DCACHE_OFF in defconfig
* Clock driver improvements:
- Introduce dt-bindings header for Agilex clocks
- Add enable/disable API and EMAC clock selection fixes
- Replace manual shifts with FIELD_GET usage
* DDR updates:
- IOSSM mailbox compatibility check
- Correct DDR calibration status handling
* Device tree changes:
- Agilex5: disable cache allocation for reads
- Stratix10: add NAND IP node
- Enable driver model watchdog
- Enable USB3.1 node for Agilex5
* Config cleanups:
- Simplify Agilex7 VAB defconfig
- Remove obsolete SYS_BOOTM_LEN from N5X VAB config
- Enable CRC32 support for SoCFPGA
- Increase USB hub debounce timeout
Overall this set improves reliability of DDR and cache flows,
adds missing USB and MMC features for Agilex5, and refines clock
and configuration handling across platforms.
This patch set has been tested on Agilex 5 devkit, and Agilex devkit.
|
|
Update documents 'README.fdt-control' reference to replacement 'control.rst':
doc/arch/nios2.rst
dts/Makefile
Also convert some adjacent pathname mentions to rST links where applicable
Fixes: 3e9fddfc4f14 "doc: Move devicetree control doc to rST"
Signed-off-by: E Shattow <[email protected]>
|
|
It can be unclear to contributors what to do if they haven't gotten any
feedback on patches they have submitted. Add a sentence saying that if
they feel it's been too long without any comment, it's OK to reply
again.
Signed-off-by: Tom Rini <[email protected]>
|
|
Describe KDOC_WERROR and recommend when building documentation for a patch
submission.
Signed-off-by: E Shattow <[email protected]>
|
|
The commit 284ef1bbcefc ("doc: memory: Add documentation for system
RAM") added documentation for U-Boot's memory usage along with diagrams
showcasing the SPL's memory usage. Although the SVGs for the diagrams
were improperly encoded.
Therefore, this patch fixes the older SVGs with one's with better
encoding and reduced size created using inkscape[1].
[1]: https://inkscape.org/
Reported-by: Alexander Dahl <[email protected]>
Fixes: 284ef1bbcefc ("doc: memory: Add documentation for system RAM")
Signed-off-by: Anshul Dalal <[email protected]>
|
|
Since commit 5cf6a06a it is possible to have both text-based and
old-style C environment files. But so far the environment documentation
has not reflected this change. This commit fixes that.
Signed-off-by: Ricardo Simoes <[email protected]>
Signed-off-by: Mark Jonas <[email protected]>
|
|
Create doc/usage/filesystems/ section.
Convert doc/README.ext4 to rST format and move it to the new section.
Update documentation to add configuration instruction for Ext4 Write
when using large partitions.
Note that this patch depends on this previous patch:
https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
Signed-off-by: Tony Dinh <[email protected]>
Reviewed-by: Anshul Dalal <[email protected]>
|
|
We currently document this command in doc/usage/cmd/itest.rst and this
documentation is more comprehensive than the older README file. Delete
the older file.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Update documentation for how to configure Ext4 Write when using large
partitions.
Signed-off-by: Tony Dinh <[email protected]>
|
|
When applying the patch that became commit a2d881f5bcd3 ("doc: memory:
Add documentation for system RAM") one of the diagrams was missed.
Re-add this missing file.
Reported-by: Adriano Carvalho <[email protected]>
Fixes: a2d881f5bcd3 doc: memory: Add documentation for system RAM
Signed-off-by: Neha Malcom Francis <[email protected]>
[trini: Take Neha's original svg and re-apply it]
Signed-off-by: Tom Rini <[email protected]>
|
|
Link: https://lore.kernel.org/u-boot/20250829191830.GZ124814@bill-the-cat/
Add documentation for config changes required to enable Falcon SD-FAT boot.
Signed-off-by: Sidharth Seela <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
Add board-level code and defconfig for the i.MX943 EVK board, supporting
multiple SOM variants: 19x19 LPDDR5, 19x19 LPDDR4 and 15x15 LPDDR4.
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
Acked-by: Peng Fan <[email protected]>
Reviewed-by: Jacky Bai <[email protected]>
|
|
Prepare v2025.10-rc5
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Use single make command for compiling blobs and U-Boot.
Update the imx firmware version.
Signed-off-by: Yannic Moog <[email protected]>
|
|
OP-TEE configs are enabled by default, change the doc to no longer
declare OP-TEE as optional. Also remove CFG_TEE_BENCHMARK as it is no
longer present in optee_os.
Further, phycore-imx8mm and imx8mm-phygate-tauri-l use different build
instructions, so dissolve the common file for building OP-TEE.
Reviewed-by: Teresa Remmet <[email protected]>
Signed-off-by: Yannic Moog <[email protected]>
|
|
Allow to flash a board using NXP UUU utility:
- Enable fastboot support on USB.
- Add fastboot partition aliases with names used by UUU. Also add extra
environment variables used by UUU.
- Set 'dofastboot' environment variable based on boot device
configuration, allowing to automatically enter fastboot when booting
from USB.
Signed-off-by: Mathieu Dubois-Briand <[email protected]>
|
|
Add documentation to support the addition of the MPFS Video Kit.
Signed-off-by: Jamie Gibbons <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
With the upcoming additions of new MPFS boards, separate common
documentation to allow this to be reused appropriately and avoid
duplication.
Signed-off-by: Jamie Gibbons <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
This patch is used to restore support for i.MX95 A0 silicon. To avoid
duplicating defconfig, imx95.config is added and can be shared between
imx95_a0_19x19_evk_defconfig and imx95_19x19_evk_defconfig.
container.cfg and imximage.cfg are used to created .cfgout files that
are be passed to mkimage with -n to build flash.bin. Now they have been
deleted and replaced by adding their content to properties of node which
type is nxp-imx9image under binman node.
Fixes: 9936724aa9b ("imx95_evk: Add i.MX95 B0 support")
Signed-off-by: Alice Guo <[email protected]>
Tested-By: Tim Harvey <[email protected]> # imx95-19x19-evk (rA0)
|
|
Javier Tia <[email protected]> says:
This patch series modernizes U-Boot's code formatting infrastructure by
with current Linux kernel practices and providing a more robust and
comprehensive formatting solution.
Link: https://lore.kernel.org/r/[email protected]
|
|
The U-Boot coding style guide has been updated to include information
about using the `.clang-format` configuration file for automatic code
formatting. This ensures consistent formatting across the entire
codebase and aligns with Linux kernel coding standards. The goal with
introducing a predefined coding style is consistency rather than
personal preference.
The .clang-format file is copied directly from the Linux kernel without
any modifications, ensuring complete compatibility with kernel coding
standards.
Include comprehensive best practices for using clang-format,
specifically guidance on formatting only changed blocks versus entire
files, creating separate formatting-only commits for better code review,
and leveraging git clang-format for targeted formatting. Add examples of
editor integrations. This enhancement will help maintainers and
contributors to easily adhere to U-Boot coding standards.
Signed-off-by: Javier Tia <[email protected]>
|
