| Age | Commit message (Collapse) | Author |
|---|
|
The TQMa6UL[L]x is a family of SoMs based on the i.MX6UL[L] SoCs.
They are available either with board connectors or as LGA packages
with solder balls. Add Support for the SoM and its combination with
our MBa6ULx carrier board. For use with the MBa6ULx carrier board,
the LGA variant is soldered onto an adapter board.
Signed-off-by: Nora Schiffer <[email protected]>
Signed-off-by: Max Merchel <[email protected]>
|
|
Caleb Ethridge <[email protected]> says:
This series performs a general cleanup of the default U-boot environment
for sc5xx boards, stemming from the decision to no longer store the
environment in the SPI flash. The environments for each board have been
edited to contain the minimum number of commands needed for all supported
boot modes to avoid confusion, and the default boot command synced to spi
for all boards that support it. The filesystem for the SPI flash has also
been changed from jffs2 to ubifs.
A bug with the Ethernet reset line on the sc594 has been fixed, and the
sc573 has been renamed from the EZKIT to the EZLITE to match the name of the
publically available board. EZKIT was only used internally before release.
Preliminary binman support for sc5xx boards has been removed as it was unused
and full support never added.
Link: https://lore.kernel.org/r/[email protected]
|
|
Rename the SC573 EZKIT board to EZLITE across the device tree,
defconfig, board file, and related Kconfig/Makefile entries to
match with release naming. EZKIT was used internally before the
official product release.
Signed-off-by: Caleb Ethridge <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Wadim Egorov <[email protected]> says:
This is a small updates across all K3 based phytec SoMs.
Update docs, rm-cfg yaml files and drop rauc environment.
Link: https://lore.kernel.org/r/[email protected]
|
|
The phyCORE-AM62x and phyCORE-AM64x R5 SPL detects the populated DDR
size from the SoM EEPROM and falls back to 2 GB if detection fails. For
boards without a populated EEPROM or if no detection needed, the detection
can be bypassed via CONFIG_PHYCORE_AM6{2,4}X_RAM_SIZE_FIX and one of
the CONFIG_PHYCORE_AM6{2,4}X_RAM_SIZE_<size> choices.
Add a "DDR RAM Size" section to both board docs describing this
behaviour and listing the available size options (1/2/4 GB for AM62x,
1/2 GB for AM64x).
Signed-off-by: Wadim Egorov <[email protected]>
|
|
Add two short sections to the common K3 phyCORE docs.
Describe the default boot flow and its deprecated version.
And write down the use of the watchdog.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
A handful of small inaccuracies had crept into the phyCORE-AM6x docs.
Mostly typos and formatting Issues. Fix them. While at it, update the
am62a board to use the correct product link.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
Daniel Golle <[email protected]> says:
This series adds dm-verity support to U-Boot's FIT image infrastructure.
It is the first logical subset of the larger OpenWrt boot method series
posted as an RFC in February 2026 [1], extracted here for independent
review and merging.
OpenWrt's firmware model embeds a read-only squashfs or erofs root
filesystem directly inside a uImage.FIT container as a FILESYSTEM-type
loadable FIT image. At boot the kernel maps this sub-image directly from
the underlying block device via the fitblk driver (/dev/fit0, /dev/fit1,
...), the goal is that the bootloader never even copies it to RAM.
dm-verity enables the kernel to verify the integrity of those mapped
filesystems at read time, with a Merkle hash tree stored contiguously in
the same sub-image just after the data. Two kernel command-line
parameters are required:
dm-mod.create= -- the device-mapper target table for the verity device
dm-mod.waitfor= -- a comma-separated list of block devices to wait for
before dm-init sets up the targets (needed when fitblk
probes late, e.g. because it depends on NVMEM
calibration data)
The FIT dm-verity node schema was upstreamed into the flat-image-tree
specification [2], which this implementation tries to follow exactly.
The runtime feature is guarded behind CONFIG_FIT_VERITY. If not
enabled the resulting binary size remains unchanged. If enabled the
binary size increases by about 3kB.
[1] previous submissions:
RFC: https://www.mail-archive.com/[email protected]/msg565945.html
v1: https://www.mail-archive.com/[email protected]/msg569472.html
v2: https://www.mail-archive.com/[email protected]/msg570599.html
v3: https://www.mail-archive.com/[email protected]/msg573223.html
v4: https://www.mail-archive.com/[email protected]/msg574000.html
[2] flat-image-tree dm-verity node spec:
https://github.com/open-source-firmware/flat-image-tree/commit/795fd5fd7f0121d0cb03efb1900aafc61c704771
Link: https://lore.kernel.org/r/[email protected]
|
|
Add documentation for CONFIG_FIT_VERITY which allows U-Boot to
construct dm-mod.create= and dm-mod.waitfor= kernel command-line
parameters from dm-verity metadata embedded in FIT filesystem
sub-images.
The new document covers the relationship between FIT loadable indices
and the /dev/fitN block devices that the Linux uImage.FIT block driver
creates, provides a complete .its example with a dm-verity-protected
SquashFS root filesystem, describes all required and optional dm-verity
subnode properties and explains how mkimage generates the verity
metadata automatically.
dm-verity is only supported for external-data FIT images (mkimage -E);
mkimage aborts with an error if the flag is omitted.
Signed-off-by: Daniel Golle <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This series from James Hilliard <[email protected]> converts the
static flags list for the environment to be configured via Kconfig and
updates the documentation.
Link: https://lore.kernel.org/r/[email protected]
|
|
Environment callbacks can already be configured from Kconfig with
CONFIG_ENV_CALLBACK_LIST_STATIC, but static environment flags still
require board headers to define CFG_ENV_FLAGS_LIST_STATIC.
Add CONFIG_ENV_FLAGS_LIST_STATIC and use it as the only board-provided
static environment flags list. Convert the remaining default-config users
from CFG_ENV_FLAGS_LIST_STATIC to defconfig settings and drop the legacy
header macro from ENV_FLAGS_LIST_STATIC.
Move the environment flags format documentation out of README and into
the developer environment documentation. Include the format in the
Kconfig help as well.
This lets boards configure writeable-list policy and type validation
from defconfig without adding a config header solely for env flags.
This preserves the behavior of default configs. Header-only cases that
were inactive in upstream defconfigs are not converted into defconfig
entries: iot2050 can add its list when enabling ENV_WRITEABLE_LIST, and
smegw01 can add mmcdev:dw support if the unlocked SYS_BOOT_LOCKED=n
configuration is needed.
Signed-off-by: James Hilliard <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Walter Schweizer <[email protected]>
|
|
Prepare v2026.07-rc3
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Our official domain is now u-boot-project.org, so update all in-tree
references to use the correct domain.
Reviewed-by: Tony Dinh <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
The option is only available when CONFIG_SYSRESET_QCOM_PSCI is enabled,
so let's make that explicit in the boot cmd documentation.
Due to the implementation in drivers/sysreset/sysreset-uclass.c
do_reset() function, all options to the reset command are passed to all
sysreset drivers' sysreset_ops.request_arg callback (including -w) which
is only available when CONFIG_SYSRESET_CMD_RESET_ARGS=y. -w, however,
works also without this option.
Fixes: ef06c5d76ff4 ("cmd: boot: Add '-edl' option to reset command documentation")
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
"Do warm WARM" doesn't mean anything, I'm assuming the intent was to say
"Do WARM reset" so reword.
Fixes: 34e452dd0252 ("doc: usage: Group all shell command docs into cmd/ sub-directory")
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add instructions on how to use U-Boot to save
DDR training data to NVM and explain the saving
process.
Signed-off-by: Simona Toaca <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-stm
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/30081
- reset: stm32: Fix compilation error
- Remove remaining non-existant STM32_RESET flag
- configs: stm32mp13: Add SPI-NAND UBI boot support
- Support metadata-driven A/B boot for STM32MP25
|
|
Janne Grunau <[email protected]> says:
The Linux device trees for Apple silicon devices cover now most of the
hardware as u-boot's internal device trees for M1 devices. Linux has in
addition device trees M2 and M1 and M2 Pro/Max/Ultra devices which were
never added in u-boot.
The most common use case for u-boot on Apple silicon devices does not
use DTBs from u-boot but passes runtime modified device trees from an
earlier boot loader (m1n1).
This change regresses support for the SPI on M1 and M1 Pro/Max notebooks
as SPI keyboard support is not in upstream Linux. This regression is in
my opinion acceptable due to the limited use of u-boot's DTBs for these
targets.
Link: https://lore.kernel.org/r/[email protected]
|
|
The device tree on Apple silicon devices is passed from a previous
bootloader stage. The bootloader fills in dynamic information so
u-boot can not use its own device tree.
As documented in doc/board/apple/m1.rst it is possible to build boot
bundles (bootloader + device tree + gzipped u-boot binary). These are
useful for testing.
Instead of using u-boot's own device trees for M1 (t8103) devices use
upstream device trees from dts/upstream/src/arm64/apple. The u-boot
device trees have not seen updates since 2022. The upstream linux device
trees have feature parity for the M1 devices. In addition linux has
device trees for M1 Pro/Max/Ultra, M2 and M2 Pro/Max/Ultra devices.
Keep t8103-j274 as default device tree to avoid further updates.
Signed-off-by: Janne Grunau <[email protected]>
Acked-by: Mark Kettenis <[email protected]>
|
|
Remove outdated apple,pinctrl.yaml. The dts/upstream contains the
current version of this binding.
Signed-off-by: Janne Grunau <[email protected]>
Acked-by: Mark Kettenis <[email protected]>
|
|
These SoCs are supported since 2022/2023 but were never added to the
documentation. The devices very similar to the equivalent M1 devices.
The biggest difference is that the M2 and M2 Pro/Max based laptops no
longer use SPI for the keyboard.
Signed-off-by: Janne Grunau <[email protected]>
Acked-by: Mark Kettenis <[email protected]>
|
|
The 'part' command currently allows looking up a partition only by its
number or name.
Extend the 'number', 'start', and 'size' subcommands to support looking
up the partition via its UUID. Unlike names, UUIDs guarantee unique
partition identification, avoiding ambiguity.
The logic is updated to check if the provided string is a valid UUID
before falling back to a name-based search. The help strings for these
subcommands are updated accordingly.
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The Extended Boot Loader Partition (XBOOTLDR) is a standard defined by
the Discoverable Partitions Specification (DPS) to host boot loader
resources outside of the EFI System Partition ([1], [2]).
Defining this GUID (bc13c2ff-59e6-4262-a352-b275fd6f7172) allows U-Boot
to correctly identify and label these partitions using the "xbootldr"
shorthand.
[1] https://uapi-group.org/specifications/specs/discoverable_partitions_specification/#extended-boot-loader-partition:~:text=UEFI%20Specification.-,Extended%20Boot%20Loader%20Partition,-bc13c2ff%2D59e6%2D4262
[2] https://uapi-group.org/specifications/specs/boot_loader_specification/
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
NET=y
In the past, we only had one network stack which was called NET. The
network features were enabled for the legacy (and then only) networking
stack since commit 22353fa6b585 ("bootstd: Add some default filesystems
and commands"). Then instead on relying on NET legacy stack for enabling
networking features, the dependencies were (mostly) changed to depend on
CMD_NET in commit a0c739c184ca ("boot: Create a common BOOT_DEFAULTS for
distro and bootstd"). Then a new stack (lwIP) appeared, then CMD_NET was
made available with this new stack in commit 98ad145db61a ("net: lwip:
add DHCP support and dhcp commmand") making the networking features
possible to enable and finally commit f1e978fd54d9 ("boot: Update tests
around network symbols in BOOT_DEFAULTS_CMDS") made it explicit that we
need *a* network stack to enable some networking features.
Align the bootstd documentation with what's actually implemented as
Kconfig dependencies. Note that BOOTSTD_DEFAULTS selects BOOT_DEFAULTS
which selects BOOT_DEFAULTS_CMDS which then selects network features.
The CMDLINE symbol needs to be enabled as well for BOOT_DEFAULTS to
select BOOT_DEFAULTS_CMDS, but I don't think we need to go that far into
explaining what's required to enable some commands.
Reported-by: Simon Glass <[email protected]>
Closes: https://lore.kernel.org/u-boot/CAFLszTgZC1FGy8965pHiG-u=FhrguftRv41ghQ_Qb_RRXx6tyg@mail.gmail.com/
Signed-off-by: Quentin Schulz <[email protected]>
|
|
We cannot use .clang-format without modification. For instance U-Boot
has some for each macros that Linux does not have.
Adjust the description.
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add fTPM support documentation including an overview, configuration
steps for RPMB provisioning, OP-TEE TA build instructions, and
verification procedure.
Signed-off-by: Shiva Tripathi <[email protected]>
|
|
Add build steps for building U-Boot in secure state with
TF-A and OP-TEE. It includes the full steps for building
OP-TEE and TF-A to use with U-Boot. Also a short description
how to invoke QEMU with enabled EL3 and EL2. EL3 (machine
option secure=on) is required to run TF-A.
Signed-off-by: Johannes Krottmayer <[email protected]>
Acked-by: Heinrich Schuchardt <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Tuomas Tynkkynen <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Quentin Schulz <[email protected]> says:
This migrates the net options away from the main Kconfig to net/Kconfig,
rename the current NET option to NET_LEGACY to really highlight what it
is and hopefully encourage more people to use lwIP, add a new NET
menuconfig (but keep NO_NET as an alias to NET=n for now) which then
allows us to replace all the "if legacy_stack || lwip_stack" checks with
"if net_support" which is easier to read and maintain.
The only doubt I have is wrt SYS_RX_ETH_BUFFER which seems to be needed
for now even when no network is configured? Likely due to
include/net-common.h with PKTBUFSRX?
No change in behavior is intended. Only change in defconfig including
other defconfigs where NO_NET=y or NET is not set, in which case NO_NET
is not set or NET=y should be set in the top defconfig. Similar change
required for config fragments. See commit log in patch adding NET
menuconfig for details.
This was tested based on 70fd0c3bb7c2 ("x86: there is no
CONFIG_UBOOT_ROMSIZE_KB_12288"), from within the GitLab CI container
trini/u-boot-gitlab-ci-runner:noble-20251013-23Jan2026 and set up
similarly as in "build all platforms in a single job" GitLab CI job.
#!/usr/bin/env bash
set -o pipefail
set -eux
ARGS="-BvelPEWM --reproducible-builds --step 0"
./tools/buildman/buildman -o ${O} --force-build $ARGS -CE $*
./tools/buildman/buildman -o ${O} $ARGS -Ssd $*
O=../build/u-boot/ ../u-boot.sh -b master^..b4/net-kconfig |& tee ../log.txt
I can't really decipher the log.txt, but there's no line starting with
+ which would be an error according to tools/buildman/builder.py help
text. Additionally, because I started the script with set -e set and
because buildman has an exit code != 0 when it fails to build a board,
and I have the summary printed (which is the second buildman call), I
believe it means all builds passed.
The summary is the following:
aarch64: (for 537/537 boards) all +0.0 rodata +0.0
uniphier_v8 : all +1 rodata +1
u-boot: add: 0/0, grow: 1/0 bytes: 1/0 (1)
function old new delta
data_gz 10640 10641 +1
arm: (for 733/733 boards) all -0.0 rodata -0.0
uniphier_v7 : all -1 rodata -1
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-1 (-1)
function old new delta
data_gz 11919 11918 -1
opos6uldev : all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 18778 18775 -3
uniphier_ld4_sld8: all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 11276 11273 -3
stemmy : all -20 rodata -20
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-20 (-20)
function old new delta
data_gz 15783 15763 -20
As far as I could tell this data_gz is an automatically generated array
when CONFIG_CMD_CONFIG is enabled. It is the compressed .config stored
in binary form. Because I'm changing the name of symbols, replacing a
menu with a menuconfig, additional text makes it to .config and the
"# Networking" section in .config disappears.
Here is the diff for the 5 defconfigs listed above, generated with:
for f in build/*-m; do
diff --unified=0 $f/.config $(dirname $f)/$(basename -a -s '-m' $f)/.config
done
(-m is the build directory for master, and without the suffix, it's the
top commit of this series)
"""
--- build/opos6uldev-m/.config 2026-04-20 10:53:49.804528526 +0200
+++ build/opos6uldev/.config 2026-04-20 11:03:37.430242767 +0200
@@ -970,4 +969,0 @@
-
-#
-# Networking
-#
@@ -975,0 +972 @@
+CONFIG_NET_LEGACY=y
--- build/stemmy-m/.config 2026-04-20 11:01:33.653698123 +0200
+++ build/stemmy/.config 2026-04-20 11:04:53.452577311 +0200
@@ -733,4 +732,0 @@
-
-#
-# Networking
-#
@@ -738,2 +733,0 @@
-# CONFIG_NET is not set
-# CONFIG_NET_LWIP is not set
--- build/uniphier_ld4_sld8-m/.config 2026-04-20 11:00:41.605469071 +0200
+++ build/uniphier_ld4_sld8/.config 2026-04-20 11:04:22.226439899 +0200
@@ -997,4 +996,0 @@
-
-#
-# Networking
-#
@@ -1002,0 +999 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v7-m/.config 2026-04-20 10:53:04.019307319 +0200
+++ build/uniphier_v7/.config 2026-04-20 11:03:01.688085486 +0200
@@ -1004,4 +1003,0 @@
-
-#
-# Networking
-#
@@ -1009,0 +1006 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v8-m/.config 2026-04-20 10:43:05.614441175 +0200
+++ build/uniphier_v8/.config 2026-04-20 10:41:03.214852130 +0200
@@ -875,4 +874,0 @@
-
-#
-# Networking
-#
@@ -880,0 +877 @@
+CONFIG_NET_LEGACY=y
"""
This is fine:
- Networking menu doesn't exist anymore so "#\n# Networking\n#\n" won't
be in .config anymore.
- opos6uldev, uniphier_ld4_sld8, uniphier_v7 and uniphier_v8 all have
(old) CONFIG_NET enabled, (new) CONFIG_NET will still be set but
CONFIG_NET_LEGACY also needs to be defined now to reflect the stack
choice (even if default),
- stemmy has CONFIG_NO_NET set, which means CONFIG_NET and
CONFIG_NET_LWIP are not reachable anymore hence why they don't need to
be part of .config,
GitLab CI was run on this series (well, not exactly, but it's only
changes to the git logs that were made):
https://source.denx.de/u-boot/contributors/qschulz/u-boot/-/pipelines/29849
It passes.
Link: https://lore.kernel.org/r/[email protected]
|
|
TPL_NET symbol never existed in the first place, so let's remove this
misleading piece of documentation.
Fixes: 143c9a7e9d68 ("doc: describe TPL/VPL/SPL boot")
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Since the move to make NET a menuconfig and NO_NET a synonym of NET=n,
when NET is enabled, NET_LEGACY || NET_LWIP is necessarily true, so
let's simplify the various checks across the codebase.
SPL_NET_LWIP doesn't exist but SPL_NET_LEGACY is an alias for SPL_NET so
the proper symbol is still defined in SPL whenever needed.
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Highlight that NET really is the legacy networking stack by renaming the
option to NET_LEGACY.
This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise
CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL.
The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is
using the legacy networking app so this seems fine to do.
This also has the benefit of removing potential confusion on NET being a
specific networking stack instead of "any" network stack.
Signed-off-by: Quentin Schulz <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Add help text about '-edl' option to reset command definition and
related documentation.
Reviewed-by: Casey Connolly <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series reworks the FIT test (test_fit.py) to make it easier to
maintain and extend. It fixes the buildconfigspec so the test actually
runs on sandbox, avoids unnecessary U-Boot restarts, renames the main
test for easier selection, adds a missing-kernel check, fixes Python
warnings, converts the test to use a class, splits into separate test
functions, and adds Sphinx documentation.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a Sphinx automodule page for test_fit.py so it appears in the pytest
documentation alongside the other test modules. The index already uses a
glob pattern, so this is picked up automatically.
Signed-off-by: Simon Glass <[email protected]>
|
|
signed_hdmi_imx8m.bin is already signed and has a IVT header. It should not
be put in u-boot-spl-mkimage.signed.bin. Move it to head of flash.bin
following NXP imx-mkimage. Keeping it in u-boot-spl-mkimage.signed.bin also
consumes a lot of TCM space which is not expected.
While moving it to head of flash.bin, other changes are required,
u-boot.itb is put at sector 768 per defconfig, so u-boot.itb binman
offset should be updated and it should be moved out from binman section.
Also binman symbol address are updated, so need to subtract u-boot-spl
image_pos + CONFIG_SPL_TEXT_BASE to find the correct location of ddr phy
firmware.
Because there is 1KB padding in HDMI firmware, use 32KB when burning
flash.bin to sd card.
Signed-off-by: Peng Fan <[email protected]>
|
|
Add support for the Toradex Verdin iMX95.
Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit
Signed-off-by: Emanuele Ghidoli <[email protected]>
Co-developed-by: Ernest Van Hoecke <[email protected]>
Signed-off-by: Ernest Van Hoecke <[email protected]>
Co-developed-by: Francesco Dolcini <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add readme for the tqma7 board.
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Alexander Feilke <[email protected]>
|
|
When the J784S4-EVM is configured for PCIe Boot, the Bootloaders are to
be written to the address specified by particular BARs. The existing
documentation hard-codes the address corresponding to the BAR under the
assumption that the Root-Complex transferring the Bootloaders is also
a J784S4-EVM. The Root-Complex assigns addresses to the BARs depending
on the currently available set of free system addresses. Since the free
system addresses vary with the Root-Complex being used, instead of
hard-coding the BARs, automate the process of identifying the appropriate
BAR in the form of a command to be run by the user on the Root-Complex.
Signed-off-by: Siddharth Vadapalli <[email protected]>
|
|
The title should be 'Contributing' as this is not the 'Overview' of the
U-Boot project.
The top title should be H1, the other titles H2.
Fixes: 0290cec364f6 ("Add an initial CONTRIBUTE.rst")
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
The bootcount variable is only incremented
when the upgrade_variable is non-zero,
as implemented in drivers/bootcount/bootcount_env.c
Signed-off-by: Michael Opdenacker <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
The argument is parsed as hexadecimal number.
Link: https://lists.denx.de/pipermail/u-boot/2026-April/613799.html
Signed-off-by: Matwey V. Kornilov <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
These files are now auto-generated by the binman_docs Sphinx extension
during the doc build, so the committed copies and their symlinks in
doc/develop/package/ are no longer needed.
Update binman.rst to reference the Sphinx extension instead of the
manual generation commands.
Signed-off-by: Simon Glass <[email protected]>
Rebased to apply file deletions cleanly.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Currently entries.rst and bintools.rst are generated manually by running
'binman entry-docs' and 'binman bintool-docs', then committed to the
repo. This means the docs can drift out of date when docstrings are
updated but the RST files are not regenerated.
Add a Sphinx extension (binman_docs) that provides two custom
directives:
.. binman-entry-docs::
.. binman-bintool-docs::
These parse the etype and btool source files using the ast module to
extract class docstrings, then insert the documentation directly into
the document tree. This avoids the need to import binman modules (which
have dependencies like libfdt that are not available in the ReadTheDocs
build environment) and avoids writing any intermediate files.
Signed-off-by: Simon Glass <[email protected]>
|
|
This series from Daniel Palmer <[email protected]> improves debug UART
support on QEMU on M68K by adding debug uart support to the serial
driver.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a paragraph to explain how to get the address of the goldfish
tty and use it as the debug uart. I think the address is actually
fixed right now but it might change in the future.
Signed-off-by: Daniel Palmer <[email protected]>
|
|
Fix the link to the 2026.04 stats page. It was likely copied from the
2026.01 line below and not updated.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
|
