| Age | Commit message (Collapse) | Author |
|---|
|
|
|
TrueType fixes and documentation
|
|
|
|
- v2019.04 for no dm conversion drivers
- v2019.07 for partially converted drivers.
Note: there were many updates on this deadline, so better
not update this again.
Signed-off-by: Jagan Teki <[email protected]>
|
|
imx for 2019.01
- introduce support for i.MX8M
- fix size limit for Vhybrid / pico boards
- several board fixes
- w1 driver for MX2x / MX5x
|
|
This fixes two small typos in mxsimage.txt.
Signed-off-by: Michael Heimpold <[email protected]>
Reviewed-by: Breno Lima <[email protected]>
|
|
Signed-off-by: Michael Heimpold <[email protected]>
Reviewed-by: Breno Lima <[email protected]>
|
|
Two variants of controllers are supported:
V1 (bitwise only) found in
i.MX21, i.MX27, i.MX31, i.MX51
V2 (byte operations) found in
i.MX25, i.MX35, i.MX50, i.MX53
Only tested on i.MX53 hardware but in both modes
(by modifying the device tree).
Signed-off-by: Martin Fuzzey <[email protected]>
|
|
U-Boot supports using TrueType fonts on the console, which is useful for
presenting a nice UI to users, e.g. for system recovery.
Add information about how to compile this on ARM platforms, since this is
not obvious.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Philipp Tomsich <[email protected]>
|
|
Describe the implementation of sub-commands.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
updated READM.odroid for supported Odroid HC1 development board.
Signed-off-by: Anand Moon <[email protected]>
Reviewed-by: Lukasz Majewski <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Rename ax25-ae350 as ae350_rv[32|64] for 32 or 64 bit.
Signed-off-by: Rick Chen <[email protected]>
Cc: Greentime Hu <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
The function part_init() will only be built when we have both
CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE set. Protect the call to
this function with both of these tests now.
Cc: Simon Glass <[email protected]>
Cc: Philipp Tomsich <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: York Sun <[email protected]>
Cc: Prabhakar Kushwaha <[email protected]>
Cc: Mingkai Hu <[email protected]>
Cc: Stefan Roese <[email protected]>
Cc: Marek Behún <[email protected]>
Cc: Vanessa Maegima <[email protected]>
Cc: Eugen Hristev <[email protected]>
Cc: Adam Ford <[email protected]>
Cc: Jagan Teki <[email protected]>
Cc: Tom Warren <[email protected]>
Cc: Stephen Warren <[email protected]>
Cc: Vitaly Andrianov <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Currently on qemu-arm platforms environment is kept in RAM. Instead
use pflash device 1 to provide persistent environment support across
device reset.
Also (optionally) provide support for persistent environment across
qemu machine OFF/ON using following instructions:
- Create envstore.img using qemu-img:
qemu-img create -f raw envstore.img 64M
- Add a pflash drive parameter to the command line:
-drive if=pflash,format=raw,index=1,file=envstore.img
Signed-off-by: Sumit Garg <[email protected]>
|
|
Improvements:
- init DRAM for RK322x in SPL
- add FAN53555 PMIC/regulator driver
- update MicroCrystal RV3029 driver to Kconfig and sync from Linux
- add bootcount uclass and first DM-driver for bootcount
|
|
This adds a driver for the FAN53555 family of regulators and wraps it
in a PMIC implementation.
While these devices support a 'normal' and 'suspend' mode (controlled
via an external pin) to switch between two programmable voltages, this
incarnation of the driver assumes that the device is always operating
in 'normal' mode.
Only setting/reading the programmed voltage is supported at this time
and the following device functionality remains unsupported:
- switching the selected voltage (via a GPIO)
- disabling the voltage output via software-control
This matches the functionality of the Linux driver.
Tested on a RK3399-Q7 (with 'option 5' devices): setting voltages from
the U-Boot shell and verifying output voltages on the board.
Signed-off-by: Philipp Tomsich <[email protected]>
Tested-by: Klaus Goger <[email protected]>
|
|
The original bootcount methods do not provide an interface to DM and
rely on a static configuration for I2C devices (e.g. bus, chip-addr,
etc. are configured through defines statically). On a modern system
that exposes multiple devices in a DTS-configurable way, this is less
than optimal and a interface to DM-based devices will be desirable.
This adds a simple driver that is DM-aware and configurable via DTS.
If ambiguous (i.e. multiple bootcount-devices are present) the
/chosen/u-boot,bootcount-device property can be used to select one
bootcount device.
Initially, this provides support for the following DM devices:
* RTC devices
Signed-off-by: Philipp Tomsich <[email protected]>
Tested-by: Klaus Goger <[email protected]>
|
|
In some cases it may be useful to be able to change the fdt we have been
using and use another one instead. For example, the TI platforms uses an
EEPROM to store board information and, based on the type of board,
different dtbs are used by the SPL. When DM_I2C is used, a first dtb must
be used before the I2C is initialized and only then the final dtb can be
selected.
To speed up the process and reduce memory usage, introduce a new function
fdtdec_setup_best_match() that re-use the DTBs loaded in memory by
fdtdec_setup() to select the best match.
Signed-off-by: Jean-Jacques Hiblot <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
- Various MTD fixes from Boris
- Zap various unused / legacy paths.
- pxa3xx NAND update from Miquel
Signed-off-by: Tom Rini <[email protected]>
|
|
The biggest part of migration to using CONFIG_BLK is that we need to
have the various subsystems migrated first, so reword the plan here to
reference the new deadlines.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
As the core of the subsystem has been converted along with some of the
drivers, formalize a deadline for migration.
Cc: Akshay Bhat <[email protected]>
Cc: Andreas Geisreiter <[email protected]>
Cc: Bin Meng <[email protected]>
Cc: Christian Gmeiner <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Jason Liu <[email protected]>
Cc: Ken Lin <[email protected]>
Cc: Ludwig Zenz <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Max Krummenacher <[email protected]>
Cc: Nikita Kiryanov <[email protected]>
Cc: Otavio Salvador <[email protected]>
Cc: Peng Fan <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Cc: Soeren Moch <[email protected]>
Cc: Stefan Roese <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Tim Harvey <[email protected]>
Cc: Troy Kisky <[email protected]>
Cc: Tuomas Tynkkynen <[email protected]>
Cc: York Sun <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
As much of the USB system has been migrated to DM now, formalize a
deadline for migration.
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Given that at this point the MMC subsystem itself has been migrated
along with a number of subsystem drivers, formalize a deadline for
migration.
Reviewed-by: Simon Glass <[email protected]>
Cc: Jaehoon Chung <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Goldschmidt <[email protected]>
Reviewed-by: Philipp Tomsich <[email protected]>
|
|
Patch queue for efi - 2018-12-03
This release is fully packed with lots of glorious improvements in UEFI
land again!
- Make PE images more standards compliant
- Improve sandbox support
- Improve correctness
- Fix RISC-V execution on virt model
- Honor board defined top of ram (fixes a few boards)
- Imply DM USB access when distro boot is available
- Code cleanups
|
|
Signed-off-by: Philippe Reynes <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Provide settings for Open-iSCSI
Reformat headers. h3-headers marked with ^^^ are not recognized in some
markup editors. Use the ### notation instead.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Alexander Graf <[email protected]>
|
|
|
|
Linux uses "cdns,qspi-nor" as compatible string for the cadence
qspi driver, so change driver, docs and all device trees.
Signed-off-by: Simon Goldschmidt <[email protected]>
|
|
Add a few notes on how to try out the MediaTek support so far.
Signed-off-by: Ryder Lee <[email protected]>
Tested-by: Frank Wunderlich <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
spi_init used in some areas in tree, but the respective
drivers will remove in future patches.
So remove the same instances.
Signed-off-by: Jagan Teki <[email protected]>
|
|
|
|
The old 'sb' command was deprecated in 2015 and replaced with 'host'.
Remove the remaining users and the command, so that the name is available
for other purposes.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a description of the purpose of bloblist and how to use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a boot command to distro boot to support disks connected over the
VirtIO bus. The boot command uses the shared block environment.
Signed-off-by: Lukas Auer <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Alexander Graf <[email protected]>
|
|
K3 based AM654 devices has DDR memory subsystem that comprises
Synopys DDR controller, Synopsis DDR phy and wrapper logic to
intergrate these blocks into the device. This DDR subsystem
provides an interface to external SDRAM devices. Adding support
for the initialization of the external SDRAM devices by
configuring the DDRSS registers and using the buitin PHY
routines.
Reviewed-by: Tom Rini <[email protected]>
Signed-off-by: Lokesh Vutla <[email protected]>
Signed-off-by: Andreas Dannenberg <[email protected]>
Signed-off-by: Keerthy <[email protected]>
Signed-off-by: Schuyler Patton <[email protected]>
Signed-off-by: James Doublesin <[email protected]>
|
|
Signed-off-by: Martin Fuzzey <[email protected]>
|
|
Convert the Watchdog driver for AT91SAM9x processors to support
the driver model and device tree. Changes "CONFIG_AT91SAM9_WATCHDOG"
to new "CONFIG_WDT_AT91" Kconfig option.
Signed-off-by: Prasanthi Chellakumar <[email protected]>
|
|
Add some description about pre-relocation driver binding, including
usage of DM_FLAG_PRE_RELOC flag and caveats.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add REAME.virtio to describe the information about U-Boot support for
VirtIO devices, including supported boards, build instructions, driver
details etc.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This patch adds ethernet support for the MIPS based Mediatek MT76xx SoCs
(e.g. MT7628 and MT7688), including a minimum setup of the integrated
switch. This driver is loosly based on the driver version included in
this MediaTek github repository:
https://github.com/MediaTek-Labs/linkit-smart-uboot.git
Tested on the MT7688 LinkIt smart-gateway and on the
Gardena-smart-gateway.
Signed-off-by: Stefan Roese <[email protected]>
Reviewed-by: Daniel Schwierzeck <[email protected]>
Cc: Joe Hershberger <[email protected]>
Cc: Frank Wunderlich <[email protected]>
Cc: Weijie Gao <[email protected]>
Acked-by: Joe Hershberger <[email protected]>
|
|
Merged imx8 architecture, fix build for imx8 + warnings
|
|
There is no need to have README in all i.MX documents name.
Remove README from i.MX docs name and add .txt file extension.
Signed-off-by: Breno Lima <[email protected]>
Reviewed-by: Ye Li <[email protected]>
|
|
The Serial Download Protocol feature is availible in various
i.MX SoCs.
Move README.sdp document to imx/misc directory.
Signed-off-by: Breno Lima <[email protected]>
|
|
The current High Assurance Boot document README.mxc_hab
include details for the following features in a single file:
- HAB Secure Boot
- HAB Encrypted Boot
Split HAB documentation in a specific directory for a cleaner
documentation structure, subsequent patches will include more
content in HAB documentation.
Signed-off-by: Breno Lima <[email protected]>
|
|
The following documents describe device details according to the
i.MX family:
- README.imx25
- README.imx27
- README.imx5
- README.imx6
- README.mxs
Move all device common related document to doc/imx/common for a better
directory structure.
Signed-off-by: Breno Lima <[email protected]>
|
|
The following documents describe the image type used by the mkimage
tool to generate U-Boot images for i.MX devices.
- README.imximage
- README.mxsimage
Move all mkimage related document to doc/imx/mkimage for a better
directory structure.
Signed-off-by: Breno Lima <[email protected]>
|
|
Currently the Serial Download Protocol tools and procedure are
documented in two places:
- doc/imx/README.sdp
- doc/imx/README.imx6
It is better to consolidate all SDP related information into
README.sdp file, so move the content from README.imx6 to
README.sdp.
Signed-off-by: Breno Lima <[email protected]>
|
|
Currently the U-Boot doc/ directory contains the following files
that are only relevant for i.MX devices:
- doc/README.imx25
- doc/README.imx27
- doc/README.imx5
- doc/README.imx6
- doc/README.imximage
- doc/README.mxc_hab
- doc/README.mxs
- doc/README.mxsimage
- doc/README.sdp
Move all content to a common i.MX folder for a better documentation
structure.
Signed-off-by: Breno Lima <[email protected]>
|
|
There are some sections in current doc saying 64-bit is unsupported.
This apparently is out of date. Remove it.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Currently only 32-bit U-Boot for QEMU x86 is documented. Mention
the 64-bit support.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
