| Age | Commit message (Collapse) | Author |
|---|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2023-07-rc6
* move FIT documentation to HTML
* man-pages for the bind, bootm, and unbind commands
|
|
Reformat and rewrite the documentation for this command.
This is a complicated command, so further improvements are welcome.
Signed-off-by: Simon Glass <[email protected]>
|
|
Bring this file into the documentation. For now it is not in the correct
format for a command, but it is valid rST. Futher work will improve this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move this properties into the main spec.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rather than having this as an addition to the end, move this into the
main body of the spec, rewriting as needed.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add tables which include all values for type, algo, arch, algo and
compression.
Signed-off-by: Simon Glass <[email protected]>
|
|
Avoid reference to uImage which is the old format. Drop the historical
language at the top and rewrite a few other sections. Correct the
U-Boot filename which is now in the boot/ directory.
Signed-off-by: Simon Glass <[email protected]>
|
|
Bring this file into the documentation.
Signed-off-by: Simon Glass <[email protected]>
|
|
Bring this file into the documentation.
Signed-off-by: Simon Glass <[email protected]>
|
|
Bring these files into the documentation.
Fix 'wtih' and 'it' typos and repeated 'could' while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
Bring this file into the documentation.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert these to rST format and add them to the index.
Signed-off-by: Simon Glass <[email protected]>
|
|
Fix up headings and tables to read better.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move this document and convert it to rST. Make minimal changes, enough
for it to build successfully.
Future patches will tidy this up.
Signed-off-by: Simon Glass <[email protected]>
|
|
Create a new usage/fit directory which will house information about FIT.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
provide a man-page for the bind command
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Provide a man-page for the unbind command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Per GitHub Dependabot:
- Use setuptools 65.5.1 to avoid some DoS issue
- Use requests 2.31.0 to avoid leaking some proxy information
Signed-off-by: Tom Rini <[email protected]>
Tested-by: Heinrich Schuchardt <[email protected]>
|
|
EVT_DM_POST_INIT_F only works in U-Boot proper, not SPL.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Polish the wording a bit
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Provide a man-page for the imxtract command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next
Xilinx changes for v2023.10-rc1
global:
- Use proper U-Boot project name
Fix sparse warnings in zynqmp-clk, zynqmp handoff, board
cmd:
- Cover incorrect 0 length entries
Versal NET:
- Add bootmode logic
- Support SPP production version
- Add loadpdi command
ZynqMP:
- Clear pmufw node command ID handling
- Change power domain behavior around zynqmp_pmufw_node()
- Fix zynqmp cmd return values and pmufw command
- Fix R5 tcm init and modes
mmc:
- Sync Versal NET emmc DT binding
pcie:
- Add support for ZynqMP PCIe root port
video:
- Add support for ZynqMP DP
tools:
- Fix debug message in relocate-rela
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Use proper project name in comments, Kconfig, readmes.
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
|
|
Add code to support FWU_MULTI_BANK_UPDATE.
The platform does not have gpt-partition storage for
Banks and MetaData, rather it used SPI-NOR backed
mtd regions for the purpose.
Signed-off-by: Jassi Brar <[email protected]>
|
|
Add 'mkfwumdata' tool to generate FWU metadata image for the meta-data
partition to be used in A/B Update imeplementation.
Signed-off-by: Sughosh Ganu <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
|
|
Any requirement of FWU should not require changes to bindings
of other subsystems. For example, for mtd-backed storage we
can do without requiring 'fixed-partitions' children to also
carry 'uuid', a property which is non-standard and not in the
bindings.
There exists no code yet, so we can change the fwu-mtd bindings
to contain all properties within the fwu-mdata node.
Signed-off-by: Jassi Brar <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Tested-by: Sughosh Ganu <[email protected]>
|
|
Add board code for the R8A77970 V3MSK board.
Add CPLD sysreset driver to the R-Car V3M SK board.
Extracted from a larger patch by Valentine Barshak.
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Valentine Barshak <[email protected]>
Signed-off-by: Hai Pham <[email protected]>
Signed-off-by: Tam Nguyen <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
[Marek: Sync configs and board code with V3M Eagle, squash CPLD driver in]
|
|
This commit describe the procedure to configure lowest supported
version in the device tree for anti-rollback protection.
Signed-off-by: Masahisa Kojima <[email protected]>
|
|
This commit describes the procedure to add the firmware version
into the capsule file.
Signed-off-by: Masahisa Kojima <[email protected]>
|
|
Current mkeficapsule tool does not provide firmware
version management. EDK II reference implementation inserts
the FMP Payload Header right before the payload.
It coutains the fw_version and lowest supported version.
This commit adds a new parameters required to generate
the FMP Payload Header for mkeficapsule tool.
'-v' indicates the firmware version.
When mkeficapsule tool is invoked without '-v' option,
FMP Payload Header is not inserted, the behavior is same as
current implementation.
The lowest supported version included in the FMP Payload Header
is not used, the value stored in the device tree is used instead.
Signed-off-by: Masahisa Kojima <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
This commit gets the lowest supported version from device tree,
then fills the lowest supported version in FMP->GetImageInfo().
Signed-off-by: Masahisa Kojima <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
%s/than/then
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
* loady may return $? = 1.
* Move misplaced description
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Provide a man-page for the loadx command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Provide a man-page for the loadb command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
This patch adds documentation for j7200.
TRM link
https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Udit Kumar <[email protected]>
Tested-by: Heinrich Schuchardt <[email protected]>
|
|
When build Xen target with Clang, the linker reports failure.
This patch adds the related info in the documentation as a known issue
and gives details for how to dismiss the building failure with Clang.
Signed-off-by: Leo Yan <[email protected]>
|
|
In non-combined boot flow for K3, all the firewalls are locked by default
until sysfw comes up. Rom configures some of the firewall for its usage
along with the SRAM for R5 but the PSRAM region is still locked.
The K3 MCU Scratchpad for j721e was set to a PSRAM region triggering the
firewall exception before sysfw came up. The exception started happening
after adding multi dtb support that accesses the scratchpad for reading
EEPROM contents.
The commit changes R5 MCU scratchpad for j721e to an SRAM region.
Old Map:
┌─────────────────────────────────────┐ 0x41c00000
│ SPL │
├─────────────────────────────────────┤ 0x41c40000 (approx)
│ STACK │
├─────────────────────────────────────┤ 0x41c85b20
│ Global data │
│ sizeof(struct global_data) = 0xd8 │
├─────────────────────────────────────┤ gd->malloc_base = 0x41c85bfc
│ HEAP │
│ CONFIG_SYS_MALLOC_F_LEN = 0x70000 │
├─────────────────────────────────────┤ CONFIG_SPL_BSS_START_ADDR
│ SPL BSS │ (0x41cf5bfc)
│ CONFIG_SPL_BSS_MAX_SIZE = 0xA000 │
└─────────────────────────────────────┘ CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX
(0x41cffbfc)
New Map:
┌─────────────────────────────────────┐ 0x41c00000
│ SPL │
├─────────────────────────────────────┤ 0x41c40000 (approx)
│ EMPTY │
├─────────────────────────────────────┤ 0x41c81920
│ STACK │
│ SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000 │
├─────────────────────────────────────┤ 0x41c85920
│ Global data │
│ sizeof(struct global_data) = 0xd8 │
├─────────────────────────────────────┤ gd->malloc_base = 0x41c859f0
│ HEAP │
│ CONFIG_SYS_MALLOC_F_LEN = 0x70000 │
├─────────────────────────────────────┤ CONFIG_SPL_BSS_START_ADDR
│ SPL BSS │ (0x41cf59f0)
│ CONFIG_SPL_BSS_MAX_SIZE = 0xA000 │
├─────────────────────────────────────┤ 0x41cff9fc
│ NEW MCU SCRATCHPAD │
│ SYS_K3_MCU_SCRATCHPAD_SIZE = 0x200 │
└─────────────────────────────────────┘ CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX
(0x41cffbfc)
Fixes: ab977c8b91b4 ("configs: j721s2_evm_r5: Enable support for building multiple dtbs into FIT")
Signed-off-by: Manorit Chawdhry <[email protected]>
[[email protected]: SRAM allocation addressing diagram]
Signed-off-by: Neha Francis <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Kamlesh Gurudasani <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2023-07-rc3
Documentation:
* update the description of signature algorithms
UEFI:
* fix unaligned access to GUID in HII database protocol
* fix launching EFI binaries loaded via semihosting
* fix filling of file path in loaded image protocol for non-block devices
|
|
https://source.denx.de/u-boot/custodians/u-boot-sh
- R-Car RZN1 support
|
|
We use the terms 'distro' to mean extlinux but they are not really the
same. 'Distro' could refer to any method of booting a distribution,
whereas extlinux is a particular method.
Also we sometimes use syslinux, but it is better to use the same term in
all cases.
Rename distro to syslinux and also update bootstd uses of syslinux to use
extlinux instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
Signed-off-by: Baruch Siach <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Since U-Boot supports more RSA/SHA variants, as well as ECDSA, remove
these items from the TODO list.
Signed-off-by: Baruch Siach <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Signed-off-by: Baruch Siach <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
U-Boot now uses the U_BOOT_CRYPTO_ALGO() macro.
Signed-off-by: Baruch Siach <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
U-Boot supports more hash and verification algorithms these days.
Signed-off-by: Baruch Siach <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
As a starting point, list all currently supported Renesas boards.
For the RZ/N1 board, add details about booting and flashing.
Signed-off-by: Ralph Siemsen <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
Renesas RZ/N1 devices contain BootROM code that loads a custom SPKG
image from QSPI, NAND or USB DFU. Support this format in mkimage tool.
SPKGs can optionally be signed, however creation of signed SPKG is not
currently supported.
Example of how to use it:
tools/mkimage -n board/schneider/rzn1-snarc/spkgimage.cfg \
-T spkgimage -a 0x20040000 -e 0x20040000 \
-d u-boot.bin u-boot.bin.spkg
The config file (spkgimage.cfg in this example) contains additional
parameters such as NAND ECC settings.
Signed-off-by: Ralph Siemsen <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
