| Age | Commit message (Collapse) | Author |
|---|
|
Update the FIT signature testing instructions to use the pytest suite instead of
the old vboot_test.sh script.
Signed-off-by: Enric Balletbo i Serra <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
The J784S4 and AM69 Platforms page only details the defconfigs for
J784S4.
Mention the ones needed for AM69-SK as well, to guide users on how to
build for that board.
Signed-off-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
Create a Kconfig which indicates that EFI functionality is in use,
either as a client (EFI app / stub) or provider (EFI loader). This will
make it easier to share code between these two parts of U-Boot
Signed-off-by: Simon Glass <[email protected]>
|
|
The generic name 'EFI' would be more useful for common EFI features. At
present it just refers to the EFI app and stub, which is confusing.
Rename it to EFI_CLIENT
Signed-off-by: Simon Glass <[email protected]>
|
|
This directory was created when U-Boot gained the ability to run as an
EFI app in 2015. Since then the EFI-loader feature has been added.
The code in lib/efi is not actually used by the loader, so the name is
confusing.
Rename the directory to efi_client to indicate that it includes files
just for U-Boot being a client of EFI, i.e. the EFI app and stub.
Signed-off-by: Simon Glass <[email protected]>
|
|
- Enhanced e850-96 support
|
|
Now that USB is enabled on the E850-96 board, DFU and fastboot tools are
functional and can be used to flash images to eMMC. Update the E850-96
documentation accordingly and describe flashing to User Data Area and
Boot HW Partition of eMMC using fastboot and DFU tools.
Signed-off-by: Sam Protsenko <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Add the initial board support for the NXP i.MX93 FRDM board:
https://www.nxp.com/design/design-center/development-boards-and-designs/frdm-i-mx-93-development-board:FRDM-IMX93
Based on the NXP U-Boot code.
There were attempts to upstream the board devicetree, but it has not been
accepted upstream yet:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Once it reaches upstream, we can switch to OF_UPSTREAM.
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Fastboot currently supports MMC and NAND flash devices. Similarly,
extend the support to SPI flash memories.
Note that in this initial implementation, partitions on the device are
not supported yet, but raw partitions can be set in U-Boot environment.
To define a raw partition descriptor, add an environment variable
similar to the MMC case:
```
fastboot_raw_partition_<raw partition name>=<offset> <size>
```
for example:
```
fastboot_raw_partition_boot=0x0 0x1000000
```
Signed-off-by: Ariel D'Alessandro <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Use new email for community work. Also remove my
capricorn SoM maintainer entry since I do not
have access to this hardware anymore.
Signed-off-by: Anatolij Gustschin <[email protected]>
|
|
These use the same format as PXE boot.
Signed-off-by: Fiona Klute <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
This works better with RST formatting, and avoids duplication.
Signed-off-by: Fiona Klute <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
This is only a reformatting, with a few grammar fixes (capitalization,
and a missing "is" and "be" added each).
Signed-off-by: Fiona Klute <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
Correct the references for
* the x86 boot protocol description
* the FIT file format
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Introducing documentation support for Qualcomm Dragonwing IQ8 QCS8300
board. Documents the build and flashing steps.
Signed-off-by: Balaji Selvanathan <[email protected]>
|
|
The GitHub dependabot tool has reported a number of issues recently with
some modules that we use. While unlikely to be exploitable in the way we
use them, update various libraries to the latest.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <[email protected]>
|
|
i.MX95 B0 uses image container format v2 and needs DUMMY_DDR so that
update imximage.cfg and container.cfg for it.
Signed-off-by: Alice Guo <[email protected]>
|
|
Use the @mailbox.org mail address also for community work.
Signed-off-by: Stefan Roese <[email protected]>
|
|
This series from Ilias Apalodimas <[email protected]> largely
finishes the re-sync with the Linux Kernel v5.1 kbuild system.
Link: https://lore.kernel.org/r/[email protected]
|
|
Our last sync with the kernel was 5.1. Even that was a partial one
as some patches from 4.x kernels were already missing making the
transition to a modern kbuild infeasible.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefile[.lib/.kbuild].
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call.
One of the biggest changes is get rid of partial linking entirely and
build .a archives isntead of .o.
We diaviate from the kernel on that. Instead of calling a custom script
to create the archive symbol table, we call ar with rcTP (isntead of
rcSTP) since we want a resulting archive that's sauble with the linker.
The only affected platforms are PPC ones. Unfortunately I don't have any
of them around to test, but the objdump of the resulting files --
arch/powerpc/lib/built-in.[oa] looks identical.
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Add a proper documentation file for the sntp command in RST format and
drop doc/README.SNTP. The documentation now includes the NET_LWIP
specificities.
Signed-off-by: Jerome Forissier <[email protected]>
|
|
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
This option is very useful for A/B boot setups with read-only
filesystems: Letting U-Boot fill in the rootfs (and possibly related
parameters) allows keeping all boot parameters except the actual slot
selection in the extlinux.conf file, where they can be updated easily.
Signed-off-by: Fiona Klute <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
Sughosh Ganu <[email protected]> says:
The LMB module has a bunch for API's which are used for allocating
memory. There are a couple of API's for requesting memory, and two
more for reserving regions of memory. Replace these different API's
with a single one, lmb_alloc_mem(). The type of allocation to be made
is specified through one of the parameters to the function.
Additionally, the two API's for reserving regions of memory,
lmb_reserve() and lmb_alloc_addr() are the same with one
difference. One can reserve any memory region with lmb_reserve(),
while lmb_alloc_addr() actually checks that the memory region being
requested is part of the LMB memory map. Reserving memory that is not
part of the LMB memory map is pretty futile -- the allocation
functions do not allocate memory which has not been added to the LMB
memory map.
This series also removes the functionality allowing for reserving
memory regions outside the LMB memory map. Any request for reserving a
region of memory outside the LMB memory map now returns an -EINVAL
error.
Certain places in the common code using the LMB API's were not
checking the return value of the functions. Checks have been added for
them. There are some calls being made from the architecture/platform
specific code which too do not check the return value. Those have been
kept the same, as I do not have the platform with me to check if it
causes any issues on those platforms.
In addition, there is a patch which refactors code in
lmb_overlaps_region() and lmb_can_reserve_region() so that both
functionalities can be put in a single function, lmb_overlap_checks().
Finally, a new patch has been added which checks the return value of
the lmb allocation function before copying the device-tree to the
allocated address.
Link: https://lore.kernel.org/r/[email protected]
[trini: Rework arch/arm/mach-snapdragon/board.c merge]
Signed-off-by: Tom Rini <[email protected]>
|
|
The LMB module has undergone significant changes in the recent
past. Add a document which briefly describes what the LMB module does,
and the changes that have been made to it's design since the 2025.01
release.
Signed-off-by: Sughosh Ganu <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-snapdragon into next
This PR introduces 3 new platforms, two from the new Dragonwing IQx
series (QCS615 and QCS8300) as well as the IPQ5424.
Additionally:
* Support for booting downstream Android boot images on some phones is
added
* Capsule update support is expanded to be more generic, determining
which partition U-Boot was flashed to automatically and supporting
many more boards.
* Minor capsule update bugs are fixed
* A watchdog driver is added and gets timeout support
* Autoboot now requires pressing "space" specifically to stop booting as
a workaround for some boards getting rogue key presses which would
cause autoboot to fail
* Documentation is added for the Dragonwing boards
* The RB1/2 now use USB gadget mode rather than host
* A bug is fixed where GPIO reads could return incorrect values
|
|
The mkmbn tool isn't available yet, so it's still necessary to use
qtestsign for signing.
Update the docs to describe it, this can be reverted once mkmbn and the
associated tooling is merged.
Link: https://lore.kernel.org/u-boot/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
As required e.g. on Fairphone 5, add an example how to use boot image
with header version 2.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
This command does not work as described in this doc, so replace it with
a regular make with qcom_defconfig, as already used for other
defconfigs.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
One needs to set CROSS_COMPILE also for the actual compilation, not just
for the kconfig step, otherwise the host arch compiler would be used.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Introducing documentation support for Qualcomm Dragonwing series
boards. Documents the build and flashing steps.
Signed-off-by: Balaji Selvanathan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[Casey: add dragonwing to board/qualcomm/index.rst]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Prepare v2025.07-rc5
With this merge, tighten up the LTO_FLAGS removal we added to not
trigger on ARMv7 (which is Thumb-2 and should be fine).
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
IPQ5424 expects U-Boot to have MBN version 7 header. The qtestsign tool
presently documented doesn't support v7. Hence update the instructions
to use a different tool that can support both v6 and v7.
Signed-off-by: Varadarajan Narayanan <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
The note about U-Boot not being able to verify server certificates is
false now that WGET_CACERT and WGET_BUILTIN_CACERT have been added.
Remove it.
Signed-off-by: Jerome Forissier <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Marek Vasut <[email protected]> says:
Rename the environment related variables and add ENV_ prefix, so that
all configuration options which are related to environment would have
an CONFIG_ENV_ prefix. No functional change.
Link: https://lore.kernel.org/r/[email protected]
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Also rename USE_DEFAULT_ENV_FILE to USE_ENV_DEFAULT_ENV_TEXT_FILE .
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_SW_PARTITION to clarify this is the SD/MMC software
partition table entry selector. Update the help text accordingly.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device
index, a number, as enumerated by U-Boot. Update the help text
accordingly.
Signed-off-by: Marek Vasut <[email protected]>
|
|
This will allow arch(s) that use device tree blobs to pad the end of the
device tree so they can be modified by board files at run time. This will
help prevent errors such as FDT_ERR_NOSPACE from occurring.
Signed-off-by: Eric Schikschneit <[email protected]>
[trini: Change default order so that X86 && EFI_APP works correctly]
|
|
Martin Schwan <[email protected]> says:
This series implements a new bootmeth for RAUC A/B systems. RAUC (Robust
Auto Update Controller) is a lightweight update client, providing "Safe
and Secure OTA Updates for Embedded Linux". See the following links for
more information about RAUC:
https://rauc.io/
https://rauc.readthedocs.io/en/latest/
PHYTEC uses RAUC in its Yocto based distribution "Ampliphy" as the
default way of updating embedded devices based on PHYTEC hardware. So
far, the logic selecting the correct partitions and files to boot was
being implemented in the U-Boot environment. While this is a
straightforward way to do it, adding and supporting new platforms became
somewhat tedious and is platform-specific. The introduction of U-Boot's
"Standard Boot" provided a convincing alternative, promising a simpler
and more portable way of booting, even for RAUC systems. This led me to
implement a new bootmeth supporting RAUC A/B systems. Note, that this
new bootmeth is not proprietary to PHYTEC products and is designed to
work on other hardware with a RAUC A/B system, too.
The bootmeth currently only supports symmetric A/B partitioning layouts.
E.g. A/rescue is not (yet) supported. The partition indexes and default
slot tries can be specified via configuration options.
For now, the bootmeth_rauc uses a similar approach for loading the
Kernel and device tree as the bootmeth_script, in that it requires a FIT
containing a U-Boot script loading the desired distro. It could be
possible to support booting without a script and load the Kernel and DT
directly with this bootmeth, but I found the script method to be very
flexible for now, in letting the distro decide what to load.
The bootmeth_rauc was tested on a phyBOARD-Pollux i.MX8M Plus [1] with
BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.2 [2].
Supported boot devices are currently only MMC devices, but it should be
possible to add SPI flashes in the future.
To test this patch stack with PHYTEC's phyBOARD-Pollux i.MX8M Plus
board, you need to adjust the boot files to include the boot.scr.uimg
containing the distro's boot script and set "optargs" to "${raucargs}"
in it. Also disable any legacyboot in the U-Boot environment and simply
boot with Standard Boot:
bootmeth order rauc
bootflow scan -lb
[1]: https://www.phytec.eu/en/produkte/single-board-computer/phyboard-pollux/
[2]: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.2/
Link: https://lore.kernel.org/r/[email protected]
[trini: Don't enable by default]
|
|
Add documentation for the bootmeth "rauc", which boots an A/B system
with RAUC from MMC.
Signed-off-by: Martin Schwan <[email protected]>
|
|
Add information on type partition, copied from README.gpt.
I also correct issue for gpt_parts variable and add example of
"gpt read" usage.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/26728
- Add support for imx28 BTT boards.
|
|
The btt[c3] devices are based on imx287 SoC.
U-Boot SPL 2025.04-01081-g07e086681d26 (Apr 16 2025 - 12:24:36 +0200)
Trying to boot from MMC1
U-Boot 2025.04-01081-g07e086681d26 (Apr 16 2025 - 12:24:36 +0200)
CPU: Freescale i.MX28 rev1.2 at 454 MHz
BOOT: SSP SPI #3, master, 3V3 NOR
Model: BTT3
Board: LWE BTT SoM HW rev 0
DRAM: 256 MiB
Core: 86 devices, 15 uclasses, devicetree: separate
MMC: MXS MMC: 0
Loading Environment from SPIFlash... SF: Detected is25lp128 with page
size 256 Bytes, erase size 64 KiB, total 16 MiB
OK
In: serial@80074000
Out: serial@80074000
Err: serial@80074000
Net: eth0: ethernet@800f0000
Hit any key to stop autoboot: 0
Signed-off-by: Lukasz Majewski <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250616
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26704
Usb gadget:
- Fix ti_musb driver in gadget mode (with DM_USB_GADGET)
DFU:
- mmc/scsi backends when using 10 or more partitions
|
|
Add Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0
(R8A779G3) SoC. This is a single-board computer with single gigabit ethernet,
DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports,
micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD,
debug UART and JTAG.
DT is imported from Linux next commit:
a719915e76f2 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <[email protected]>
|
|
Prepare v2025.07-rc4
|
|
Signed-off-by: Tom Rini <[email protected]>
|
