| Age | Commit message (Collapse) | Author |
|---|
|
To avoid the problem fixed in commit 57a95d522ca8 ("doc: release_cycle:
fix next release version") moving forward, make use of the variable
substitution feature of rST. This adds a next_ver variable and
references it in all of the places where I had been listing the version
being worked on.
Suggested-by: Quentin Schulz <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Tested-by: Quentin Schulz <[email protected]>
|
|
J722S has hw rng, which can be used by OPTEE.
So remove option to use SW TRNG by OPTEE.
Signed-off-by: Udit Kumar <[email protected]>
Reviewed-by: Nishanth Menon <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
|
The Tegra Note 7 is a mini tablet computer and the second Tegra 4
based mobile device designed by Nvidia that runs the Android operating
system. The Tegra Note has a 7" IPS display with 1280 x 800 (217 ppi)
resolution. The 1 GB of RAM and 16 GB of internal memory can be
supplemented with a microSDXC card giving up to 64 GB of additional
storage.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
The ASUS Transformer Pad TF701T is an Android tablet computer made by
ASUS, successor to the ASUS Transformer Pad Infinity. The tablet includes
a Tegra 4 T114 processor clocked at 1.9 GHz, and an upgraded 2560×1600
pixel resolution screen, increasing the pixel density to 300 PPI and
a mobile dock. Transformers (t114) board derives from Nvidia Macallan
development board.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
The Motorola Atrix 4G (MB860) and Droid X2 (MB870) both featured a
dual-core NVIDIA Tegra 2 AP20H processor clocked at 1GHz, coupled with 1GB
of DDR2 RAM. Storage consisted of 16GB of internal flash memory, expandable
via microSD. The display was a 4.0-inch TFT LCD with a resolution of
960x540 pixels (qHD). The devices originally ran on Android up to 2.3
(Gingerbread).
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Tom Rini <[email protected]> says:
This series switches to always using $(PHASE_) in Makefiles when
building rather than $(PHASE_) or $(XPL_). It also starts on documenting
this part of the build, but as a follow-up we need to rename
doc/develop/spl.rst and expand on explaining things a bit.
Link: https://lore.kernel.org/r/[email protected]
|
|
Expand the conditional compilation section to explain when to use
CONFIG_IS_ENABLED rather than IS_ENABLED and provide an example. Next,
note what the PHASE_ macro is supposed to be used for as well.
Signed-off-by: Tom Rini <[email protected]>
|
|
In order to make a start on explaining how and when to use certain
macros, we need to document their usage somewhere. As a first step, take
section 21 of the v6.13 Linux Kernel coding-style document on
conditional compilation, verbatim, and add it to our documentation.
Further rewording to be clearer about U-Boot will be done next.
Signed-off-by: Tom Rini <[email protected]>
|
|
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-snapdragon
Qualcomm changes for v2025.07:
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/25653
There's been a surprising amount of activity lately on the Qualcomm
side with the two oldest boards getting some fresh attention and a lot
of cleanup and polish going on across the board.
* SDM660 gets USB phy fixes and a pinctrl driver
* The recently added SA8775P/QCS9100 SoC gets a pinctrl driver
* The Qualcomm pinctrl driver now handles reserved pins correctly,
fixing crashes on some boards when running "gpio status -a"
* OF_UPSTREAM_BUILD_VENDOR is enabled in qcom_defconfig
* SDM845 and SC7280 get missing clocks added (since we're now stricter
about those). This gets USB working more reliably in more cases.
* DM_USB_GADGET is enabled for all boards using DWC3 and fasbtoot is
enabled too
* A bug in the livetree fixup code is fixed (making USB work on a lot
more platforms)
* Button label lookup is made case insensitive* bootretry becomes more dynamic, allowing it to be hijacked to make a
"persistent" boot menu that allows dropping to U-Boot shell later on
* A new qcom-phone.config fragment is added along with a phone-specific
default environment and phone-specific debugging/bringup docs. These
make U-Boot more usable on devices without a serial port or keyboard.
* The db820c gets fixed up and updated documentation
* The db410c also gets some love and modernisation as well as a new
reviewer.
* A new driver is added for the USB VBUS regulator found on various
Qualcomm PMICs
* The Qualcomm SPMI driver gets some fixes and cleanup for SPMI v5 and
v7 support.
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/25652
- Add i.MX8MP LDB support.
- Various phycore-imx93 environment improvements.
- Add support for Toradex SMARC iMX8MP.
|
|
Add some documentation which attempts to describe Qualcomm smartphone
support with the qcom-phone.config fragment, as well as a high level
debugging guide for diagnosing U-Boot issues when UART and framebuffer
are unavailable.
Reviewed-by: Simon Glass <[email protected]>
Tested-by: Danila Tikhonov <[email protected]> # google-sunfish
Tested-by: Jens Reidel <[email protected]> # xiaomi-davinci
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add support for the Toradex SMARC iMX8MP.
Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx-8m-plus
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Signed-off-by: Vitor Soares <[email protected]>
|
|
Now that we moved out the capsule signature from the DTB, remove the
relevant documentation.
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
`.priv_data_size` does not exist. I believe the actual structure member
was supposed to be `.priv_auto`.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
|
|
Neha Malcom Francis <[email protected]> says:
This short series is an ongoing effort to make RAM utilization clearer for
easier debugging and understanding of code. Intention is for users to quickly
be able to identify the CONFIGs needed to modify for their RAM usecase.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add documentation for system RAM utilization in U-Boot.
Signed-off-by: Neha Malcom Francis <[email protected]>
|
|
Tom Rini <[email protected]> says:
One thing that Simon Glass has noted is that our pytest run time keeps
getting longer. Looking at:
https://source.denx.de/u-boot/u-boot/-/pipelines/25011/test_report?job_name=sandbox%20test.py%3A%20%5Bfast%20amd64%5D
we can see that some of the longest running tests are a little puzzling.
It turns out that we have two ways of making filesystem images without
requiring root access and one of them is significantly slower than the
other. This series changes us from using virt-make-fs to only using the
mk_fs helper that currently resides in test_ut.py which uses standard
userspace tools. The final result can be seen at:
https://source.denx.de/u-boot/u-boot/-/pipelines/25015/test_report?job_name=sandbox%20test.py%3A%20%5Bfast%20amd64%5D
and the tests changed here now run much quicker.
Link: https://lore.kernel.org/r/[email protected]
|
|
Now that we have no users of "virt-make-fs" nor users of "sudo" for
creating disk images update the documentation. We remove packages that
are no longer required (and related text) as well as be firm in our
wording around not using "sudo".
Signed-off-by: Tom Rini <[email protected]>
|
|
The release commit for version v2025.04 forgot to update the next
version (i. e. v2025.07) in the section where information about the
merge window is provided.
Fixes: 34820924edbc ("Prepare v2025.04")
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Note that this undoes the changes of commit cf6d4535cc4c ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Harsha Vardhan V M <[email protected]> says:
This patch series introduces the fuse writebuff sub-system command and
makes improvements to the existing fuse implementation by removing the
custom string functions. The patches are required to be applied in
sequence.
The series consists of the following changes:
Patch 1 removes custom string functions and replaces them with standard
string functions.
Patch 2 introduces fuse.rst documentation for fuse commands.
Patch 3 introduces the fuse writebuff sub-system command, allowing to
write a structured buffer in memory to fuses, and implementing the
necessary function calls.
Patch 4 enables the fuse sub-system in the K3 platform.
Patch 5 updates the fuse.rst documentation to include details about the
new fuse writebuff command.
These changes aim to improve the fuse sub-system by the removal of
custom string functions and the addition of the fuse writebuff
command improves fuse programming workflows by allowing to write a
structured buffer in memory to efuses.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add fuse writebuff sub-system command documentation.
Signed-off-by: Harsha Vardhan V M <[email protected]>
|
|
Add documentation for the 'fuse' sub-system commands in
doc/usage/cmd/fuse.rst file.
Remove doc/README.fuse file.
Signed-off-by: Harsha Vardhan V M <[email protected]>
|
|
When the ACPI tables come from an earlier bootloader it is helpful to
see whether the checksums are correct or not. Add a -c flag to the
'acpi list' command to support that.
Signed-off-by: Simon Glass <[email protected]>
|
|
Any 'bootable' flag in a DOS partition causes boostd to only scan
bootable partitions for that media. This can mean that extlinux.conf
files on the root disk are missed.
Put this logic behind a flag and update the documentation.
For now, the flag is enabled, to preserve the existing behaviour of
bootstd which is to ignore non-bootable partitions so long as there is
at least one bootable partition on the disk. Future work may provide a
command (or some other mechanism) to control this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Signed-off-by: Andrew Davis <[email protected]>
|
|
doc/uImage.FIT/overlay-fdt-boot.txt does not exist anymore.
Reference the correct section of doc/usage/fit/overlay-fdt-boot.rst.
Fixes: 6f6e8bb695a7 ("doc: Bring in the FIT overlay information")
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Use ..code-block:: syntax highlighting instead of :: so all bash
commands use the same syntax highlighting.
Signed-off-by: Leonard Anderweit <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Remove double :: before .. code-block:: bash to correctly highlight the
following commands.
Signed-off-by: Leonard Anderweit <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Caleb Connolly <[email protected]> says:
In Simon's series reworking autoprobe, a discussion came up about
DM_FLAG_PROBE_AFTER_BIND, specifically that it wasn't very clear where
this flag should be used.
This series implements my suggestions made there to clarify the use of
this flag, and fixup the two driver which erroneously apply it to their
driver struct (this does nothing).
Link: https://lore.kernel.org/u-boot/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
|
|
The DM_FLAG_PROBE_AFTER_BIND flag only makes sense on a per-device
basis, however recently added documentation as well as some confused
drivers imply that it might be added to a driver definition, this does
nothing.
Clarify the new documentation and expand on the comment by the
definition to point people in the right direction.
Signed-off-by: Caleb Connolly <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Acked-by: Michal Simek <[email protected]>
|
|
Remove leftover code from Milk-V Mars CM and Mars CM Lite boards that do
not exist in upstream Linux Kernel devicetree-rebasing. These will be re-
introduced when submitted upstream for a future U-Boot release. Users of
these boards should use the previous stable release of U-Boot until then.
Signed-off-by: E Shattow <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tegra into next
- More Tegra video improvements
|
|
Prepare v2025.04-rc5
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon into next
qcom-next-20230324:
* msm8916 gets proper sysreset and spin-table support
* The first new IPQ platform is added - the IPQ9574. The IPQ series are
used in routers. The flashing process is also documented
* mach-snapdragon gains the ability to boot with an internal FDT and
still parse memory from an externally provided one
* SC7280 gets a pinctrl driver and various clock driver improvements.
* Qualcom clock drivers will now actually return an error when
attempting
to enable a clock which isn't described.
* Qualcomm pinctrl drivers will now return an error when attempting to
configure an invalid function mux
|
|
The Ouya microconsole is build on Nvidia Tegra 3 (T33) SoC, featuring a
quad-core 1.7 GHz ARM Cortex-A9 CPU and a ULP GeForce GPU, paired with 1GB
of DDR3 RAM and 8GB of internal flash storage. Running a modified Android
4.1 (Jelly Bean) OS with a custom launcher, it aimed for open-source gaming
via a digital storefront.
This implementation is mostly based on upstream Linux device tree and
fragments of work done by previous developers.
Co-developed-by: Peter Geis <[email protected]>
Signed-off-by: Peter Geis <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
- odroid-n2: Update docs for signing
- support Amlogic chip_id v1 and v2
|
|
TF-A guide"
Harrison Mutai <[email protected]> says:
This patch introduces two updates to the vexpress64 project:
- Disable CRC32 by default to prevent aborts in a standard FVP setup.
- Add a guide for running FVP with TF-A, providing a clear starting point for
users.
Link: https://lore.kernel.org/r/[email protected]
|
|
Wadim Egorov <[email protected]> says:
This patch series syncs the phyCORE-AM62Ax feature-wise with our other
K3-based SoMs by adding SoM overlay handling and capsule updates. It
also introduces support for USBDFU boot and includes various minor fixes.
Link: https://lore.kernel.org/r/[email protected]
|
|
The previous instructions resulted in a bootloader that wouldn't fit in
an MBR gap. I have updated the docs based on upstream's build process.
Signed-off-by: Baltazár Radics <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Provide a common part for our K3 based boards including general details
about environment handling and EFI capsule updates.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
Add documentation on how to run FVP with U-Boot and TF-A. This helps
users configure and run U-Boot correctly on Arm models.
Signed-off-by: Harrison Mutai <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-nand-flash into next
CI: https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/25178
This merge request add support for cadence raw nand driver for agilex
board and add a fix to meson driver.
|
|
Introducing basic support for Qualcomm IPQxxx based RDPs.
Document the build and flashing steps.
Reviewed-by: Caleb Connolly <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Convert the current miiphybb documentation to rst. Rename
the README.bitbangMII to bitbangmii.rst in the process.
Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
We know this is U-Boot so the prefix serves no purpose other than to
make things longer and harder to read. Drop it and rename the files.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]> # test_android / test_dfu
|
|
This fixture name is quite long and results in lots of verbose code.
We know this is U-Boot so the 'u_boot_' part is not necessary.
But it is also a bit of a misnomer, since it provides access to all the
information available to tests. It is not just the console.
It would be too confusing to use con as it would be confused with
config and it is probably too short.
So shorten it to 'ubman'.
Signed-off-by: Simon Glass <[email protected]>
Link: https://lore.kernel.org/u-boot/CAFLszTgPa4aT_J9h9pqeTtLCVn4x2JvLWRcWRD8NaN3uoSAtyA@mail.gmail.com/
|
