summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-03-07net: zynq_gem: Fix masking of supported phydev featuresNathan Rossi
When the zynq_gem driver initializes the phy it sets the supported features that the phy can support and advertise. However instead of masking the supported features such that it limits the available features it sets the phy to have the exact supported features of the zynq_gem. This is problematic as it will enable features that a phy does not have or cannot advertise. Specifically this appears as an issue when using a phy that is only capable of 10/100, but the zynq_gem driver will override this and try to enable and advertise 10/100/1000. Reported-by: Arno Steffens <[email protected]> Fixes: 80243528ef ("net: gem: Fix gem driver on 1Gbps LAN") Signed-off-by: Nathan Rossi <[email protected]> Tested-by: Arno Steffens <[email protected]> Cc: Joe Hershberger <[email protected]> Cc: Michal Simek <[email protected]> Acked-by: Joe Hershberger <[email protected]> Acked-by: Michal Simek <[email protected]>
2017-03-01net: macb: Fix ETH not found when clock not supportWenyou Yang
For the boards such as smartweb on which the clock driver isn't supported, the ethernet fail to be found when booting up with the below log. ---8<--- Net: No ethernet found. --->8--- Signed-off-by: Wenyou Yang <[email protected]> Tested-by: Heiko Schocher <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-27drivers/net/Kconfig: Correct use of apostropheTom Rini
Signed-off-by: Tom Rini <[email protected]>
2017-02-09Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
2017-02-08net: phy: MSCC Add Support for VSC8530-VSC8531-VSC8540-VSC8541John Haechten
Signed-off-by: John Haechten <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-08Merge git://git.denx.de/u-boot-dmTom Rini
2017-02-08drivers: net: cpsw: Fix reading of mac address for am43 SoCsLokesh Vutla
cpsw driver tries to get macid for am43xx SoCs using the compatible ti,am4372. But not all variants of am43x uses this complatible like epos evm uses ti,am438x. So use a generic compatible ti,am43 to get macid for all am43 based platforms. Tested-by: Aparna Balasubramanian <[email protected]> Signed-off-by: Lokesh Vutla <[email protected]> Reviewed-by: Joe Hershberger <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2017-02-08dm: core: Replace of_offset with accessorSimon Glass
At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <[email protected]>
2017-02-07drivers: net: Provide Kconfig menu for PHYLIBAlex
Provide the necessary Kconfig symbols so that PHYLIB support may be enabled in Kconfig, as opposed to needing to #define these symbols in C source headers. BITBANGMII and MV88E6352_SWITCH are left out of the PHYLIB submenu as they don't seem to explicitly depend on it (i.e. they do not use the phy_driver class). Signed-off-by: Alexandru Gagniuc <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-07net: phy: Improve the Marvell 151x constantsJoe Hershberger
Use some constants for the phy configuration instead of so many magic numbers. Signed-off-by: Joe Hershberger <[email protected]>
2017-02-07net: fec_mxc: Fix corruption of device tree blobDaniel Strnad
Modifying content of dev->name leads to the device tree corruption because it points to the node name located there. Signed-off-by: Daniel Strnad <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Jagan Teki <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-07net: designware: Fix for use with current Linux device tree for Meson GXHeiner Kallweit
In Uboot for Meson GX the compatible string in meson-gxbb.dtsi so far is: compatible = "amlogic,meson6-dwmac", "snps,dwmac"; On Linux in the same dt file it's compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; To avoid breaking ethernet with the next DT synch from Linux to U-Boot (planned as prerequisite for adding Meson GX MMC driver to U-Boot) add "amlogic,meson-gx-dwmac" to the compatibility list in the designware driver. Signed-off-by: Heiner Kallweit <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-07net: phy: dp83867: Add support for MAC impedance configurationMugunthan V N
Add support for programmable MAC impedance configuration and fix typo in DT impedance parameters names. Signed-off-by: Mugunthan V N <[email protected]> Signed-off-by: Grygorii Strashko <[email protected]> Tested-by: Lokesh Vutla <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-07net: phy: vitesse: Fix cis8204 RGMII_ID codePhil Edworthy
Commit 79e86ccb3786c8b20004db3fa10a70049456f580 "vitesse: remove duplicated argument to ||" correctly removed a redundant check. However, I believe that the original code was simply wrong, and should have been checking against RGMII_ID. To fix this and avoid similar problems in the future, use the phy_interface_is_rgmii helper function. Signed-off-by: Phil Edworthy <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-07net: phy: Marvell: Use phy_interface_is_rgmii helper functionPhil Edworthy
Signed-off-by: Phil Edworthy <[email protected]> Reviewed-by: Stefan Roese <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-07net: phy: Add support for Marvell M88E1512Phil Edworthy
This device also works with the 88E1518 code, so we just adjust the UID mask accordingly. Signed-off-by: Phil Edworthy <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-07net: phy: Fix mask so that we can identify Marvell 88E1518Phil Edworthy
The mask for the 88E1510 meant that the 88E1518 code would never be used. Signed-off-by: Phil Edworthy <[email protected]> Reviewed-by: Stefan Roese <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-07net: phy: ti: Fix dp83867 RGMII_TXID interface pathPhil Edworthy
There is code that is specifically for RGMII_TXID interface, but this will never get used because the code checks that the RGMII interface is RGMII_ID to RGMII_RXID; RGMII_TXID is after this. To fix this and avoid similar problems in the future, use the phy_interface_is_rgmii helper function. Signed-off-by: Phil Edworthy <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-07net: macb: Remove redundant #ifdef CONFIG_DM_ETHWenyou Yang
Remove the redundant #ifdef CONFIG_DM_ETH/#endif. Signed-off-by: Wenyou Yang <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-07net: macb: Add the clock supportWenyou Yang
Due to introducing the at91 clock driver, add the clock support. Signed-off-by: Wenyou Yang <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-02-07net: Kconfig: Add CONFIG_MACB optionWenyou Yang
Add CONFIG_MACB option in KConfig to be used to select the Cadence MACB Ethernet driver. Signed-off-by: Wenyou Yang <[email protected]>
2017-02-03Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
Signed-off-by: Tom Rini <[email protected]> Conflicts: configs/ls1046aqds_defconfig configs/ls1046aqds_nand_defconfig configs/ls1046aqds_qspi_defconfig configs/ls1046aqds_sdcard_ifc_defconfig configs/ls1046aqds_sdcard_qspi_defconfig configs/ls1046ardb_emmc_defconfig configs/ls1046ardb_qspi_defconfig configs/ls1046ardb_sdcard_defconfig
2017-02-01net: phy: Support Marvell 88E1680Dirk Eibach
Add support for Marvell 88E1680 Integrated Octal 10/100/1000 Mbps Energy Efficient Ethernet Transceiver. Signed-off-by: Dirk Eibach <[email protected]> Signed-off-by: Mario Six <[email protected]> Reviewed-by: Stefan Roese <[email protected]> Acked-by: Joe Hershberger <[email protected]> Signed-off-by: Stefan Roese <[email protected]>
2017-01-31drivers: net: fsl-mc: Fixup MAC addresses in DPCBogdan Purcareata
Fixup port_mac_address property in MC DPC with values from the u-boot environment. Since u-boot already reads the environment MAC addresses when probing the PHYs, use these values. The u-boot environment MAC addresses take precedence over any eventual ones defined in the DPC, except for the case where they are randomly assigned (no u-boot env value declared for port). The patch assumes the "/board_info/ports/" node is present in the DPC. Signed-off-by: Bogdan Purcareata <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]> [York S: Fix several indentations] Reviewed-by: York Sun <[email protected]>
2017-01-28net: phy: add SMSC LAN8742 phyMichael Kurz
This patch adds support for SMSC LAN8742 in phylib Signed-off-by: Michael Kurz <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-01-28net: stm32: add designware mac glue code for stm32Michael Kurz
This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-01-11net: gmac_rockchip: Add Rockchip GMAC driverSjoerd Simons
Add a new driver for the GMAC ethernet interface present in Rockchip RK3288 SOCs. This driver subclasses the generic design-ware driver to add the glue needed specifically for Rockchip. Signed-off-by: Sjoerd Simons <[email protected]> Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Romain Perier <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-01-11net: designware: Export the operation functionsSimon Glass
Export all functions so that drivers can use them, or not, as the need arises. Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Romain Perier <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-01-11net: designware: Split the link init into a separate functionSimon Glass
With rockchip we need to make adjustments after the link speed is set but before enabling received/transmit. In preparation for this, split these two pieces into separate functions. Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Romain Perier <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-01-11net: designware: Adjust dw_adjust_link() to return an errorSimon Glass
This function can fail, so return the error if there is one. Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Romain Perier <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-01-11net: designware: Export various functions/struct to allow subclassingSjoerd Simons
To allow other DM drivers to subclass the designware driver various functions and structures need to be exported. Export these. Signed-off-by: Sjoerd Simons <[email protected]> Signed-off-by: Romain Perier <[email protected]> Reviewed-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-01-11xilinx_phy: Pass correct pointer to fdtdec_get_int()Kamensky Ivan
This patch fixes incorrect pointer on offset device in device tree blob. When using with the component "Ethernet 1G/2.5G BASE-X PCS/PMA or SGMII" it does not understand what type is XAE_PHY_TYPE_1000BASE_X and trying to change frequency. Signed-off-by: Kamensky Ivan <[email protected]> Signed-off-by: Michal Simek <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2017-01-10net: zynq_gem: Use clock driver for ZynqMPSiva Durga Prasad Paladugu
Enable and use the clock driver routine defined in clock driver toset required clock appropriately. Signed-off-by: Siva Durga Prasad Paladugu <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2017-01-10net: gem: Use wait_for_bit() instead of private mdio_wait()Michal Simek
Using generic wait_for_bit() implementation instead of using private wait function. Signed-off-by: Michal Simek <[email protected]>
2017-01-04powerpc: mpc85xx: Remove variant SoCs T1020/T1022/T1013/T1014York Sun
Remove these SoCs from Kconfig because they don't have individual configuration. Clean up existing macros. Signed-off-by: York Sun <[email protected]>
2016-12-27Update Maintainer and Author's email addressAjay Bhargav
I am not longer using my old email address "[email protected]". For U-Boot development email address is now updated to [email protected] Signed-off-by: Ajay Bhargav <[email protected]>
2016-12-20net: xilinx: Use mdio_register_seq() to support multiple instancesMichal Simek
axi_emac, emaclite and gem have the same issue with registering multiple instances with mdio busses. mdio bus name has to be uniq but drivers are setting up only one name for all. Use mdio_register_seq() and pass dev->seq number to allow multiple mdio instances registration. Reported-by: Phani Kiran Kara <[email protected]> Signed-off-by: Michal Simek <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2016-12-18Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
Migrate CONFIG_ARCH_USE_MEMSET/MEMCPY with this merge. Signed-off-by: Tom Rini <[email protected]>
2016-12-16dm: net: fec: Add .read_rom_hwaddrJagan Teki
Add .read_rom_hwaddr on dm eth_ops. Cc: Stefano Babic <[email protected]> Cc: Matteo Lisi <[email protected]> Cc: Michael Trimarchi <[email protected]> Acked-by: Joe Hershberger <[email protected]> Signed-off-by: Jagan Teki <[email protected]>
2016-12-16net: fec_mxc: Driver cleanupsJagan Teki
- Remove exctra space - Add space - Add tab space - Fix single line comments quotes - Fix 'CHECK: Avoid CamelCase' - Fix 'CHECK: Alignment should match open parenthesis' - Fix 'WARNING: line over 80 characters' - Re-arrage header include files Cc: Simon Glass <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Michael Trimarchi <[email protected]> Acked-by: Joe Hershberger <[email protected]> Signed-off-by: Jagan Teki <[email protected]>
2016-12-16net: fec_mxc: Convert into driver modelJagan Teki
This patch add driver model support for fec_mxc driver. Cc: Simon Glass <[email protected]> Cc: Joe Hershberger <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Michael Trimarchi <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2016-12-16net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddrJagan Teki
fec_get_hwaddr never used eth_device argument, hence removed. Cc: Simon Glass <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Michael Trimarchi <[email protected]> Acked-by: Joe Hershberger <[email protected]> Signed-off-by: Jagan Teki <[email protected]>
2016-12-16arm: imx: add i.MX53 Beckhoff CX9020 Embedded PCPatrick Bruenn
Add CX9020 board based on mx53loco. Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse serial_mxc with DTE and prepare for device tree migration of other functions and imx53 devices. The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - CCAT FPGA connected to emi - enable rtc Signed-off-by: Patrick Bruenn <[email protected]>
2016-12-15driver: fsl-mc: qbman: Add QBMAN 4.1 supportPriyanka Jain
LS2080A SoC family has QBMAN ver 4.0 whereas newer SoCs like LS2088A, LS1088A has QBMAN ver 4.1 QBMAN ver 4.0 and ver 4.1 supports dqrr size as 4 and 8 respectively. Add support of to check QBMAN version based on SoC SVR update dqrr_size accordingly update code to support larger dqrr_size Signed-off-by: Priyanka Jain <[email protected]> Signed-off-by: Prabhakar Kushwaha <[email protected]> Reviewed-by: York Sun <[email protected]>
2016-12-09Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"Tom Rini
This reverts commit 3edc0c252257e4afed163a3a74aba24a5509b198, reversing changes made to bb135a0180c31fbd7456021fb9700b49bba7f533.
2016-12-09Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini
2016-12-08net/phy/vitesse: Rework RGMII skew configuration for VSC8601Alex
The VSC8601 config tried to add an RGMII skew based on #defines that no config defines. That's quite an ugly way to do it. Since the skew is only needed on RGMII interfaces, check the interface mode at runtime, and apply the settings accordingly. Tested on custom board with AM3352 SOC and VSC801 PHY. Signed-off-by: Alexandru Gagniuc <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2016-12-08net: fman: fix 2.5G SGMII settingsshaohui xie
The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in set_if_mode(), and the serdes PCS configuration are wrong, this patch uses the correct settings took from Linux. Signed-off-by: Shaohui Xie <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2016-12-08net: phy: realtek: Only force master mode on rtl8211b/c[email protected]
Commit 525d187af ("net: phy: Optionally force master mode for RTL PHY") added the define to force the PHY into master mode. Unfortunatly this is an all or nothing switch. So it applies to either all PHY's or no PHY's. The bug that define tried to solve was a buggy PLL in the RTL8211C only. The Olimex OLinuXino Lime2 has gotten an upgrade where the PHY was replaced with an RTL8211E. With this define however, both lime2 boards are either forced to master mode or not. We could of course have a binary for each board, but the following patch fixes this by adding a 'quirk' to the flags to the rtl8211b and rtl8211c only. It is now possible to force master mode, but only have it apply to the rtl8211b and rtl8211c. Signed-off-by: Olliver Schinagl <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2016-12-08net: phy: realtek: make define more consistent[email protected]
All internal defines in the realtek phy are with a small X, except MIIM_RTL8211X_CTRL1000T_MASTER. Make this more consistent Signed-off-by: Olliver Schinagl <[email protected]> Acked-by: Joe Hershberger <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-31 08:29:49 +0000