summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2023-01-10net: zynq_gem: Add support for new compatible str with xlnx prefixMichal Simek
cdns prefix was deprecated and replaced by xlnx one. Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/7d1312d741349451b36558baa3e9132247303992.1670599167.git.michal.simek@amd.com
2023-01-09Merge branch 'next'Tom Rini
Signed-off-by: Tom Rini <[email protected]>
2023-01-06Revert "Revert "cmd: pxe_utils: Check fdtcontroladdr in label_boot""Marek Vasut
This reverts commit ed6251187afabf811a5fd49a44ebd61c53c7b378. Superseded by "cmd: pxe_utils: Limit fdtcontroladdr usage to non-fitImage" which is less heavy-handed approach and retains part of the original behavior for non-fitImage. Signed-off-by: Marek Vasut <[email protected]> Acked-by: Neil Armstrong <[email protected]>
2022-12-23global: Migrate CONFIG_TSEC_TBICR_SETTINGS to CFGTom Rini
Perform a simple rename of CONFIG_TSEC_TBICR_SETTINGS to CFG_TSEC_TBICR_SETTINGS Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_SH_ETHER_USE_PORT to CFGTom Rini
Perform a simple rename of CONFIG_SH_ETHER_USE_PORT to CFG_SH_ETHER_USE_PORT Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_SH_ETHER_PHY_ADDR to CFGTom Rini
Perform a simple rename of CONFIG_SH_ETHER_PHY_ADDR to CFG_SH_ETHER_PHY_ADDR Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_SH_ETHER_CACHE_WRITEBACK to CFGTom Rini
Perform a simple rename of CONFIG_SH_ETHER_CACHE_WRITEBACK to CFG_SH_ETHER_CACHE_WRITEBACK Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_SH_ETHER_CACHE_INVALIDATE to CFGTom Rini
Perform a simple rename of CONFIG_SH_ETHER_CACHE_INVALIDATE to CFG_SH_ETHER_CACHE_INVALIDATE Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_SH_ETHER_ALIGNE_SIZE to CFGTom Rini
Perform a simple rename of CONFIG_SH_ETHER_ALIGNE_SIZE to CFG_SH_ETHER_ALIGNE_SIZE Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_PHY_ET1011C_TX_CLK_FIX to CFGTom Rini
Perform a simple rename of CONFIG_PHY_ET1011C_TX_CLK_FIX to CFG_PHY_ET1011C_TX_CLK_FIX Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_KSNET_SERDES_SGMII_BASE to CFGTom Rini
Perform a simple rename of CONFIG_KSNET_SERDES_SGMII_BASE to CFG_KSNET_SERDES_SGMII_BASE Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_KSNET_SERDES_SGMII2_BASE to CFGTom Rini
Perform a simple rename of CONFIG_KSNET_SERDES_SGMII2_BASE to CFG_KSNET_SERDES_SGMII2_BASE Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_KSNET_SERDES_LANES_PER_SGMII to CFGTom Rini
Perform a simple rename of CONFIG_KSNET_SERDES_LANES_PER_SGMII to CFG_KSNET_SERDES_LANES_PER_SGMII Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_FEC_MXC_PHYADDR to CFGTom Rini
Perform a simple rename of CONFIG_FEC_MXC_PHYADDR to CFG_FEC_MXC_PHYADDR Signed-off-by: Tom Rini <[email protected]>
2022-12-22net: nuvoton: fix build broken for use phy_get_interface_by_nameJim Liu
The original patch is use phy_get_interface_by_name to set interface. The new patch is use dev_read_phy_mode to replace it. Signed-off-by: Jim Liu <[email protected]> Reviewed-by: Ramon Fried <[email protected]>
2022-12-22net: vsc9953: Remove this driverTom Rini
No platforms enable this driver as there's no T1040D4RDB nor T1040RDB support at this time. Remove. Signed-off-by: Tom Rini <[email protected]>
2022-12-22net: Remove more legacy functionsTom Rini
Remove some of the board and arch specific non-DM_ETH helper code. Signed-off-by: Tom Rini <[email protected]>
2022-12-22arm: ti814x: Remove remaining support codeTom Rini
When the ti814x_evm config was removed most, but not all, of the relevant support code was remove. Get rid of what was missed. Fixes: 50b532686849 ("ti814x: Remove platform") Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_KSNET_NETCP_V1_0 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KSNET_NETCP_V1_0 CONFIG_KSNET_NETCP_V1_5 Signed-off-by: Tom Rini <[email protected]>
2022-12-22global: Remove unused CONFIG symbolsTom Rini
This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_FLASH_SPANSION_S29WS_N et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FSL_FM_10GEC_REGULAR_NOTATION CONFIG_FSL_ISBC_KEY_EXT CONFIG_FSL_TRUST_ARCH_v1 CONFIG_FSL_SDHC_V2_3 CONFIG_MAX_DSP_CPUS CONFIG_MIU_2BIT_INTERLEAVED CONFIG_SERIAL_BOOT CONFIG_SPI_BOOTING CONFIG_X86EMU_RAW_IO Signed-off-by: Tom Rini <[email protected]>
2022-12-22fec_mxc: Remove CONFIG_FEC_FIXED_SPEED supportTom Rini
This option is only used on one platform currently. However, with PHYLIB enabled, which this platform also does, this option is not checked and the functional use case is handled. Remove this code. Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_DM9000_BYTE_SWAPPED et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DM9000_BYTE_SWAPPED CONFIG_DM9000_NO_SROM CONFIG_DM9000_USE_16BIT CONFIG_DM9000_DEBUG CONFIG_MXC_GPT_HCLK CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC Signed-off-by: Tom Rini <[email protected]>
2022-12-21Merge tag 'v2023.01-rc4' into nextTom Rini
Prepare v2023.01-rc4 Signed-off-by: Tom Rini <[email protected]>
2022-12-13Revert "cmd: pxe_utils: Check fdtcontroladdr in label_boot"Tom Rini
With the change here, all extlinux.conf files with only "KERNEL /fitImage" don't work anymore. One common example of this would be those files generated by thee Poky/OE WIC bootimg-partition bootloader partition generator. This reverts commit d5ba6188dfbf6bb68354bec86e483623f1f6dae2. Reported-by: Neil Armstrong <[email protected]> Reported-by: Quentin Schulz <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: Remove eth_legacy.cTom Rini
As there are no more non-DM_ETH cases for networking, remove this legacy file and update the Makefile to match current usage. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: keystone_net: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: cpsw: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: sunxi_emac: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: smc911x: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: sh_eth: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: rtl8169: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: rtl8139: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: phy: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: pcnet: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: netconsole: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: mvgbe: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: mcfmii: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: macb: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: ldpaa_eth: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: fsl-mc: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: fec_mxc: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: ethoc: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: eepro100: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: e1000: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: dm9000x: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: designware: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: dc2114x: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: fm: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: tsec: Remove non-DM_ETH support codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Doing this removes some board support code which was also unused. Finally, this removes some CONFIG symbols that otherwise needed to be migrated to Kconfig, but were unused in code now. Signed-off-by: Tom Rini <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-27 09:49:05 +0000