summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2020-12-14pinctrl: meson: fix bit manipulation of pin bias configurationNeil Armstrong
This fixes the wrong usage of clrsetbits_le32(), badly setting the set argument. Fixes: c4c726c26b ("pinctrl: meson: add pinconf support") Reported-by: Anton Arapov <[email protected]> Reported-by: Otto Meier <[email protected]> Signed-off-by: Neil Armstrong <[email protected]>
2020-12-09treewide: Update email address Patrick Delaunay and Patrice ChotardPatrice Chotard
Update Patrick and my email address with the one dedicated to upstream activities. Signed-off-by: Patrice Chotard <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]>
2020-11-25pinctrl: stmfx: update pin namePatrick Delaunay
Update pin name to avoid duplicated name with SOC GPIO gpio0...gpio15 / agpio0....agpio7: add a stmfx prefix. This pin name can be used in pinmux command. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-11-25pinctrl: stmfx: update pincontrol and gpio device namePatrick Delaunay
The device name is used in pinmux command and in log trace so it is better to use the parent parent name ("stmfx@42" for example) than a generic name ("pinctrl" or "stmfx-gpio") to identify the device instance. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-11-25pinctrl: stm32: display bias information for all pinsPatrick Delaunay
Display the bias information for input gpios or AF configuration, and not only for output pin, as described in Reference manual (Table 81. Port bit configuration table). Fixes: da7a0bb1f279 ("pinctrl: stm32: add information on pin configuration") Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-11-22pinctrl: renesas: Drop unused members from struct sh_pfc_pinctrlLad Prabhakar
Drop unused members from struct sh_pfc_pinctrl. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Biju Das <[email protected]>
2020-11-22pinctrl: renesas: r8a7795: Optimize pinctrl image size for R8A774E1Biju Das
This driver supports both RZ/G2H and R-Car H3 SoCs. Optimize pinctrl image size for RZ/G2H, when support for R-Car H3 (R8A7795) is not enabled Based on the similar patch on Linux. Signed-off-by: Biju Das <[email protected]>
2020-11-22pinctrl: renesas: r8a77965: Optimize pinctrl image size for R8A774B1Biju Das
This driver supports both RZ/G2N and R-Car M3-N SoCs. Optimize pinctrl image size for RZ/G2N, when support for R-Car M3-N (R8A77965) is not enabled. Based on the simialr patch on Linux. Signed-off-by: Biju Das <[email protected]>
2020-11-22pinctrl: renesas: r8a7796: Optimize pinctrl image size for R8A774A1Biju Das
This driver supports both RZ/G2M and R-Car M3-W/W+ SoCs. Optimize pinctrl image size for RZ/G2M, when support for R-Car M3-W/W+ (R8A7796[01]) is not enabled. Based on the similar patch on Linux. Signed-off-by: Biju Das <[email protected]>
2020-11-22pinctrl: renesas: r8a77951: Add R8A774E1 PFC supportBiju Das
Renesas RZ/G2H (r8a774e1) is pin compatible with R-Car H3 (r8a77951), however it doesn't have several automotive specific peripherals. Add a r8a77951 specific pin groups/functions along with common pin groups/functions for supporting both r8a77951 and r8a774e1 SoC. PFC changes are synced from mainline linux-5.9 commit bbf5c979011a ("Linux 5.9"). Signed-off-by: Biju Das <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]>
2020-11-22pinctrl: renesas: r8a77965: Add R8A774B1 PFC supportBiju Das
Renesas RZ/G2N (r8a774b1) is pin compatible with R-Car M3-N (r8a77965), however it doesn't have several automotive specific peripherals. Add a r8a77965 specific pin groups/functions along with common pin groups/functions for supporting both r8a77965 and r8a774b1 SoC. PFC changes are synced from mainline linux-5.9 commit bbf5c979011a ("Linux 5.9"). Signed-off-by: Biju Das <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]>
2020-11-17pinctrl: k210: Rename power domains to match datasheetSean Anderson
This renames power domains to match the names on the k210 datasheet. Signed-off-by: Sean Anderson <[email protected]> Reported-by: Damien Le Moal <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2020-11-17pinctrl: k210: Fix inverted IE and OE for I2CSean Anderson
I2C and SCCB previously shared defaults. However, SCCB needs OE_INV and IE_INV set, but I2C cannot have those bits set. This adds a separate default for SCCB. Signed-off-by: Sean Anderson <[email protected]> Reported-by: Damien Le Moal <[email protected]>
2020-11-06x86: pinctrl: Silence the warning when a pin is not foundSimon Glass
This does not necessarily indicate a problem, since some pins are optional. Let the caller show an error if necessary. Reviewed-by: Bin Meng <[email protected]> Signed-off-by: Simon Glass <[email protected]>
2020-11-05x86: Fix up driver names to avoid dtoc warningsSimon Glass
At present there are a lot of dtoc warnings reported when building chromebook_coral, of the form: WARNING: the driver intel_apl_lpc was not found in the driver list Correct these by using driver names that matches their compatible string. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2020-10-20pinctrl: renesas: pfc-r8a77990: Sync PFC tables with Linux 5.9Lad Prabhakar
Sync the R8A77990 SoC PFC tables with Linux 5.9 , commit bbf5c979011a. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Biju Das <[email protected]>
2020-10-08pinctrl: Add support for Kendryte K210 FPIOASean Anderson
The Fully-Programmable Input/Output Array (FPIOA) device controls pin multiplexing on the K210. The FPIOA can remap any supported function to any multifunctional IO pin. It can also perform basic GPIO functions, such as reading the current value of a pin. However, GPIO functionality remains largely unimplemented (in favor of the dedicated GPIO peripherals). Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-10-08test: pinmux: Add test for pin muxingSean Anderson
This extends the pinctrl-sandbox driver to support pin muxing, and adds a test for that behaviour. The test is done in C and not python (like the existing tests for the pinctrl uclass) because it needs to call pinctrl_select_state. Another option could be to add a command that invokes pinctrl_select_state and then test everything in test/py/tests/test_pinmux.py. The pinctrl-sandbox driver now mimics the way that many pinmux devices work. There are two groups of pins which are muxed together, as well as four pins which are muxed individually. I have tried to test all normal paths. However, very few error cases are explicitly checked for. Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-10-08pinctrl: Add pinmux property support to pinctrl-genericSean Anderson
The pinmux property allows for smaller and more compact device trees, especially when there are many pins which need to be assigned individually. Instead of specifying an array of strings to be parsed as pins and a function property, the pinmux property contains an array of integers representing pinmux groups. A pinmux group consists of the pin identifier and mux settings represented as a single integer or an array of integers. Each individual pin controller driver specifies the exact format of a pinmux group. As specified in the Linux documentation, a pinmux group may be multiple integers long. However, no existing drivers use multi-integer pinmux groups, so I have chosen to omit this feature. This makes the implementation easier, since there is no need to allocate a buffer to do endian conversions. Support for the pinmux property is done differently than in Linux. As far as I can tell, inversion of control is used when implementing support for the pins and groups properties to avoid allocating. This results in some duplication of effort; every property in a config node is parsed once for each pin in that node. This is not such an overhead with pins and groups properties, since having multiple pins in one config node does not occur especially often. However, the semantics of the pinmux property make such a configuration much more appealing. A future patch could parse all config properties at once and store them in an array. This would make it easier to create drivers which do not function solely as callbacks from pinctrl-generic. This commit increases the size of the sandbox build by approximately 48 bytes. However, it also decreases the size of the K210 device tree by 2 KiB from the previous version of this series. The documentation has been updated from the last Linux commit before it was split off into yaml files. Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-10-06Merge tag 'u-boot-amlogic-20201005' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - generate unique mac address from SoC serial on S400 board - Add USB support for GXL and AXG SoCs - Update Gadget code to use the new GXL and AXG USB glue driver - Add a VIM3 board support to add dynamic PCIe enable in OS DT - Fix AXG pinmux with requesting GPIOs - Add missing GPIOA_18 for AXG pinctrl - Add Amlogic PWM driver
2020-10-05Merge branch 'next'Tom Rini
Bring in the assorted changes that have been staged in the 'next' branch prior to release. Signed-off-by: Tom Rini <[email protected]>
2020-10-05pinctrl: meson-axg: add missing GPIOA_18Neil Armstrong
Add the missing GPIOA_18 from the missing EE gpio list. Signed-off-by: Neil Armstrong <[email protected]>
2020-10-05pinctrl: meson-axg-pmx: fix gpio requestNeil Armstrong
The AXG pmx driver gpio request offset needs the pin base to have the correct pin number. Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Mark Kettenis <[email protected]>
2020-10-05Merge tag 'u-boot-atmel-2021.01-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel into next First set of u-boot-atmel features for 2021.01 cycle: This feature set includes a new CPU driver for at91 family, new driver for PIT64B hardware timer, support for new at91 family SoC named sama7g5 which adds: clock support, including conversion of the clock tree to CCF; SoC support in mach-at91, pinctrl and mmc drivers update. The feature set also includes updates for mmc driver and some other minor fixes and features regarding building without the old Atmel PIT and the possibility to read a secondary MAC address from a second i2c EEPROM.
2020-10-05Merge tag 'u-boot-stm32-20201003' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm into next - stm32mp: DT alignment with Linux 5.9-rc4 - stm32mp: convert drivers to APIs which support live DT - stm32mp: gpio: minor fixes
2020-10-02pinctrl: bcm283x: Store the return value of dev_read_u32_default to intOvidiu Panait
Currently, the return value of dev_read_u32_default is stored in an u32, causing the subsequent "if (function < 0)" to always be false: u32 function; ... function = dev_read_u32_default(config, "brcm,function", -1); if (function < 0) { debug("Failed reading function for pinconfig %s (%d)\n", config->name, function); return -EINVAL; } Make "function" variable an int to fix this. Cc: Matthias Brugger <[email protected]> Signed-off-by: Ovidiu Panait <[email protected]> Signed-off-by: Matthias Brugger <[email protected]>
2020-10-02pinctrl: bcm283x: Read address from DT in ofdata_to_platdataOvidiu Panait
Factor out reading IP base address to ofdata_to_platdata function, which is designed for this purpose. Also, drop the dev->priv NULL check, since this is already done by the dm core when allocating space using priv_auto_alloc_size feature. (in drivers/core/device.c -> device_ofdata_to_platdata). Cc: Matthias Brugger <[email protected]> Signed-off-by: Ovidiu Panait <[email protected]> Signed-off-by: Matthias Brugger <[email protected]>
2020-10-02pinctrl: bcm283x: DM_FLAG_PRE_RELOC: Remove OF_CONTROL checkOvidiu Panait
Remove CONFIG_IS_ENABLED(OF_CONTROL) check from DM_FLAG_PRE_RELOC, since this driver only supports OF_CONTROL. drivers/pinctrl/broadcom/Kconfig: config PINCTRL_BCM283X depends on ARCH_BCM283X && PINCTRL_FULL && OF_CONTROL Cc: Matthias Brugger <[email protected]> Signed-off-by: Ovidiu Panait <[email protected]> Signed-off-by: Matthias Brugger <[email protected]>
2020-10-02pinctrl: stm32: Add header with SPDX licencePatrick Delaunay
Cosmetics: Add header with SPDX licence Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-10-02pinctrl: stm32: Convert to use APIs which support live DTPatrick Delaunay
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the driver can support live DT. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-09-26pinctrl: renesas: Fix PINCTRL_PFC_R8A774A1 help descriptionBiju Das
R8A774A1 is part of Renesas RZ/G2 series and not R-Car, reflect the same for PINCTRL_PFC_R8A774A1 help description Alongside, sort the PINCTRL_PFC_R8A774A1 config option as per increasing number of the SoC. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]>
2020-09-25pinctrl: at91-pio4: add compatible for sama7g5 pinctrl blockEugen Hristev
Add new compatible to microchip,sama7g5 new SoC. Signed-off-by: Eugen Hristev <[email protected]>
2020-09-23pinmux: pic32: add SDHCI pin configJohn Robertson
The GPIO pins used by the SDHCI controller need to be configured to allow the interface to work. Signed-off-by: John Robertson <[email protected]>
2020-09-17powerpc, qe: add DTS support for parallel I/O portsHeiko Schocher
add DM support for parallel I/O ports on QUICC Engine Block Signed-off-by: Heiko Schocher <[email protected]> Patch-cc: Mario Six <[email protected]> Patch-cc: Qiang Zhao <[email protected]> Patch-cc: Holger Brunck <[email protected]> Series-changes: 2 - remove RFC - fixed Codingstyle errors, therefore new patch powerpc, mpc83xx: fix codingstyle issues for qe_io.c - moved DM part to drivers/pinctrl Commit-notes: Open questions / discussion: - I let the old none DM based implementation in code so boards should work with old implementation. This should be removed if all boards are converted to DM/DTS. - Unfortunately linux DTS does not use "pinctrl-" properties, instead "pio-handle" properties. Even worser old U-Boot code initializes all pins defined in "const qe_iop_conf_t qe_iop_conf_tab[]" table in board code. As linux does the same I decided to also scan through all subnodes containing "pio-map" property and initialize them too. The proper solution would be to check for "pio-handle" when a device is probed. END
2020-09-01x86: pinctrl: Fix 'relatove' typoSimon Glass
Fix this typo in the Kconfig help. Suggested-by: Wolfgang Wallner <[email protected]> Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2020-08-22treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()Masahiro Yamada
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To help this tedious work, this commit converts devfdt_get_addr_ptr() to dev_read_addr_ptr() by coccinelle. I also removed redundant casts because dev_read_addr_ptr() returns an opaque pointer. To generate this commit, I ran the following semantic patch excluding include/dm/. <smpl> @@ type T; expression dev; @@ -(T *)devfdt_get_addr_ptr(dev) +dev_read_addr_ptr(dev) @@ expression dev; @@ -devfdt_get_addr_ptr(dev) +dev_read_addr_ptr(dev) </smpl> Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-08-22dm: core: Fix devfdt_get_addr_ptr return valueOvidiu Panait
According to the description of devfdt_get_addr_ptr, this function should return NULL on failure, but currently it returns (void *)FDT_ADDR_T_NONE. Fix this by making devfdt_get_addr_ptr return NULL on failure, as described in the function comments. Also, update the drivers currently checking (void *)FDT_ADDR_T_NONE to check for NULL. Signed-off-by: Ovidiu Panait <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-08-19pinctrl: mediatek: mt8512: fix the wrong start address of rangesChunfeng Yun
The start address of dout, pullen and pullsel ragnes are wrong, so fix up them. Signed-off-by: Chunfeng Yun <[email protected]>
2020-08-04pinctrl: aspeed: Fix Kconfig entry indentationMichal Simek
Fix Kconfig entry indentation for Aspeed ast2500 pin control driver. Fixes: 4f0e44e46615 ("aspeed: AST2500 Pinctrl Driver") Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-08-04Merge tag 'u-boot-imx-20200804' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2020.10 ----------- - fixes for Toradex board - fix warnings from previous PR - HAB: reset instead of panic after failure - new board: MYiR Tech MYS-6ULX - mx6cuboxi: use OF_PLATDATA - further changes for DM Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/714513163
2020-08-02drivers: rename more drivers to match compatible stringWalter Lozano
Continuing with the approach in commit <addf358bac1d2bd0> rename additional drivers to allow the OF_PLATDATA support. Signed-off-by: Walter Lozano <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-07-29pinctrl: add nexell driverStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - livetree API (dev_read_...) is used instead of fdt one (fdt...). - doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt added. Signed-off-by: Stefan Bosch <[email protected]>
2020-07-29pinctrl: mediatek: add PUPD/R0/R1 support for MT7623David Woodhouse
The pins for the MMC controller weren't being set up correctly because the pinctrl driver only sets the GPIO pullup/pulldown config and doesn't handle the special cases with PUPD/R0/R1 control. Signed-off-by: David Woodhouse <[email protected]> Tested-by: Frank Wunderlich <[email protected]>
2020-07-27Merge tag 'dm-pull-20jul20-take2a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
2020-07-25treewide: convert devfdt_get_addr() to dev_read_addr()Masahiro Yamada
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <[email protected]>
2020-07-25treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()Masahiro Yamada
Use the _ptr suffixed variant instead of casting. Also, convert it to dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE. One curious part is an error check like follows in drivers/watchdog/omap_wdt.c: priv->regs = (struct wd_timer *)devfdt_get_addr(dev); if (!priv->regs) return -EINVAL; devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error. So, this code does not catch any error in DT parsing. dev_read_addr_ptr() returns NULL on error, so this error check will work. I generated this commit by the following command: $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \ xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/' I manually fixed drivers/usb/host/ehci-mx6.c Signed-off-by: Masahiro Yamada <[email protected]>
2020-07-25pinctrl: renesas: Enable R8A774A1 PFC tablesAdam Ford
The PFC tables for the R8A774A1 are already available, but they not enabled. This patch adds the Kconfig option and builds the corresponding file when PINCTRL_PFC_R8A774A1 is enabled. Signed-off-by: Adam Ford <[email protected]>
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <[email protected]>
2020-07-20treewide: convert devfdt_get_addr() to dev_read_addr()Masahiro Yamada
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <[email protected]>
2020-07-20treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()Masahiro Yamada
Use the _ptr suffixed variant instead of casting. Also, convert it to dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE. One curious part is an error check like follows in drivers/watchdog/omap_wdt.c: priv->regs = (struct wd_timer *)devfdt_get_addr(dev); if (!priv->regs) return -EINVAL; devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error. So, this code does not catch any error in DT parsing. dev_read_addr_ptr() returns NULL on error, so this error check will work. I generated this commit by the following command: $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \ xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/' I manually fixed drivers/usb/host/ehci-mx6.c Signed-off-by: Masahiro Yamada <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-11 09:49:10 +0000