| Age | Commit message (Collapse) | Author |
|---|
|
A few reset drivers cannot build without access to some platform
specific header files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <[email protected]>
|
|
STM32F4/F7 and H7 series doesn't have a clear reset register, so
set_clr field must be set to false.
Fixes: 0994a627c278 ("reset: stm32mp25: add stm32mp25 reset driver")
Signed-off-by: Patrice Chotard <[email protected]>
|
|
Add STM32MP23 support which is a cost optimized of STM32MP25.
More details available at:
https://www.st.com/en/microcontrollers-microprocessors/stm32mp2-series.html
Signed-off-by: Patrice Chotard <[email protected]>
|
|
The stm32-reset-core.h is located in drivers/reset/stm32/ , it has to
be included using "stm32-reset-core.h" and not <stm32-reset-core.h> ,
otherwise the build fails. Fix it.
Fixes: 0994a627c278 ("reset: stm32mp25: add stm32mp25 reset driver")
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Implement STM32MP25 reset drivers using stm32-core-reset API.
This reset stm32-reset-core API and will be able to use DT binding
index started from 0.
This patch also moves legacy reset into stm32 directory reset.
Signed-off-by: Gabriel Fernandez <[email protected]>
Signed-off-by: Patrice Chotard <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
If there is a SoC specific SCMI protocol driver, using
scmi_proto_driver_get() function can avoid to add SoC specific code to
scmi_agent-uclass.c.
Signed-off-by: Alice Guo <[email protected]>
|
|
The current DT bindings for the rk3576 clock use a different ID than the
one that is supposed to be written to the hardware registers.
Thus, we cannot use directly the id provided in the phandle, but rather
use a lookup table to correctly setup the hardware.
This follows the implementation done in the Linux-Kernel and also
how the rk3588 does this both in the Linux-Kernel as well as U-Boot.
Signed-off-by: Elaine Zhang <[email protected]>
[adapted from mainline Linux code for u-boot]
Signed-off-by: Heiko Stuebner <[email protected]>
Reviewed-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add clock driver for RK3528.
Imported from vendor U-Boot linux-6.1-stan-rkr5 tag with minor
adjustments and fixes for mainline.
Signed-off-by: Joseph Chen <[email protected]>
Signed-off-by: Finley Xiao <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Current implementation releases most peripherals out of reset for
gen5, but A10 has more peripherals than gen5, hence this patch is
required to release the rest of peripherals to support old kernels.
Signed-off-by: Tien Fong Chee <[email protected]>
Signed-off-by: Naresh Kumar Ravulapalli <[email protected]>
Reviewed-by: Tien Fong Chee <[email protected]>
|
|
Christian Marangi <[email protected]> says:
This little series adds initial support for Airoha AN7581 SoC.
With the help of some backport patch, this use OF_UPSTREAM
directly.
Posting this to have the targer and the very basic driver.
Ethernet, SNAND and eMMC support is already ready downstream
and will be posted shortly after this gets approved.
Having the first driver ready permits to separately push
dedicate series for SNAND, eMMC and Ethrnet as they all depends
on basic support of clock and reset and nothing else.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add driver for controlling the reset lines of AN7581. This is a detached
version of the clock controller driver present in Linux only used to
control reset lines. Driver gets loaded with the bind of the clock
driver and doesn't require a compatible. This is needed as they share
the same registers.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Add spacemit reset driver.
Signed-off-by: Huan Zhou <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Bind the USB VBUS regulator driver under the USB PHY reset driver for
the Renesas RZ/G2L and related SoCs. This additional bind is needed as
the corresponding device tree node does not contain a compatible string.
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Paul Barker <[email protected]>
|
|
Add a new driver to control the USB 2.0 PHY reset controller on the
Renesas RZ/G2L and related SoCs.
Signed-off-by: Paul Barker <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <[email protected]>
|
|
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add support for i.MX8MP reset controller, it has same reset IP inside
as the other iMX7 and iMX8M variants but with different module layout.
Inspired from counterpart Linux kernel v6.8-rc3 driver:
drivers/reset/reset-imx7.c. Use last Linux kernel driver reference
commit bad8a8afe19f ("reset: Explicitly include correct DT includes").
Tested-by: Tim Harvey <[email protected]> #imx8mp-venice*
Tested-by: Adam Ford <[email protected]> #imx8mp-beacon-kit
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Sumit Garg <[email protected]>
|
|
imx7_reset_{deassert/assert}_imx* are a bit more confusing when compared
with imx*_reset_{deassert/assert}. So refactor driver to use function
names easier to understand. This shouldn't affect the functionality
though.
Suggested-by: Marek Vasut <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Sumit Garg <[email protected]>
|
|
It's also valid to have #reset-cells = <2> while the third arg defaults
to ASSERT_SET.
Signed-off-by: Yang Xiwen <[email protected]>
|
|
Add reset controller driver for Nuvoton BMCs.
The npcm reset driver not only supports reset each module reset
but setting initial value of reset Control Registers.
And The driver support each module reset.
Signed-off-by: Jim Liu <[email protected]>
|
|
Qualcomm's clock controller blocks actually do much more than it
says on the tin.. They provide clocks, resets and power domains.
Currently, U-Boot requires one to spawn 2 separate devices for
controlling clocks and resets, both spanning the same register space.
Refactor the code to make it work with just a single DT node, making
it compatible with upstream Linux bindings and dropping the dedicated
reset driver in favour of including it in the clock driver.
Heavily inspired by Renesas code for a similar hw block.
[caleb: moved drivers to clk/qcom, added reset driver and adjusted bind
logic. Imported qcom,gcc-ipq4019.h from Linux]
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Replace instances of http://www.ti.com with https://www.ti.com
Signed-off-by: Nishanth Menon <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-amlogic
- add Amlogic A1 clock driver
- add Amlogic A1 reset support
- add USB Device support for Amlogic A1
- enable RNG on Amlogic A1 & Amlogic S4
- move Amlogic Secure Monitor to standalone driver
|
|
The commit 85dc58289238 ("firmware: scmi: prepare uclass to pass channel
reference") added an explicit parameter, channel, but it seems to make
the code complex.
Hiding this parameter will allow for adding a generic (protocol-agnostic)
helper function, i.e. for PROTOCOL_VERSION, in a later patch.
Signed-off-by: AKASHI Takahiro <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Etienne Carriere <[email protected]>
|
|
This patch adds reset support for the Amlogic A1 family.
We add the structure meson_reset_drvdata, which in the future
will allow this driver to be used for other families by declaring
only the correct parameters reg_count and level_offset.
Signed-off-by: Alexey Romanov <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h
Move this out of the common header and include it only where needed.
Signed-off-by: Simon Glass <[email protected]>
|
|
This patch add missing return value check for allocating the driver's
private data. -ENOMEM will be returned if malloc() fails.
Signed-off-by: Sam Shih <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
The behaviour of dev_read_addr_size() is surprising as it does not
handle #address-cells and #size-cells but instead hardcodes the values
based on sizeof(fdt_addr_t).
This is different from dev_read_addr_size_index() and
dev_read_addr_size_name() both of which do read the cell sizes from the
device tree.
Since dev_read_addr_size() is only used by a single driver and this
driver is broken when CONFIG_FDT_64BIT does not match the address size
in the device tree, fix the function to behave like all of the other
similarly named functions. Drop the property name argument as the only
caller passes "reg" and this is the expected property name matching the
other similarly named functions.
Signed-off-by: John Keeping <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Tested-by: Simon Glass <[email protected]> # chromebook_jerry
Tested-by: Simon Glass <[email protected]> # chromebook_bob
|
|
The current DT bindings for the rk3588 clock use a different ID than the
one that is supposed to be written to the hardware registers.
Thus, we cannot use directly the id provided in the phandle, but rather
use a lookup table to correctly setup the hardware.
This approach has been implemented already in Linux, by commit :
f1c506d152ff ("clk: rockchip: add clock controller for the RK3588")
Hence, implement a similar approach using the lookup table, and adapt
the existing reset driver to work with SoCs using lookup table.
The file rst-rk3588.c has been copied as much as possible from Linux.
Adapt the clk rk3588 driver as well to bind the reset driver with the
lookup table.
Reviewed-by: Kever Yang <[email protected]>
Signed-off-by: Eugen Hristev <[email protected]>
|
|
Fix line spacing aligment in bind function
Fixes: 760188c1aa5b ("rockchip: reset: support a (common) rockchip reset drivers")
Signed-off-by: Eugen Hristev <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add a DM reset driver for StarFive JH7110 SoC.
Note that the register base address of reset controller is the
same with the clock controller. Therefore, there is no device
tree node alone for reset driver.It binds device node in
the clock driver
Signed-off-by: Yanhong Wang <[email protected]>
Tested-by: Conor Dooley <[email protected]>
|
|
Add reset control support in USB glue logic. This needs to control
the external clocks and resets for the logic before accessing the
glue logic.
The USB dm tree when using dwc3-generic is the following:
USB glue
+-- controller (need controller-reset)
+-- controller-reset (need syscon-reset)
+-- phy
The controller needs to deassert "controller-reset" in USB glue before
the controller registers are accessed. The glue needs to deassert
"syscon-reset" before the glue registers are accessed.
The glue itself doesn't have "syscon-reset", so the controller-reset
controls "syscon-reset" instead.
Signed-off-by: Kunihiko Hayashi <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
This allows devm_reset_control_get(dev, NULL) to work and get the first
reset control, which is common in code ported from Linux.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add support for at91 reset controller's basic assert/deassert
operations. Since this driver conflicts with the
SYSRESET driver because they both bind to the same RSTC node,
implement a custom bind hook that would manually bind the
sysreset driver, if enabled, to the same RSTC DT node.
Furthermore, delete the no longer needed compatibles from the
SYSRESET driver and rename it to make sure than any possible
conflicts are avoided.
Signed-off-by: Sergiu Moga <[email protected]>
Tested-by: Mihai Sain <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
|
|
Enable zynqmp reset driver for Versal NET.
Signed-off-by: Jay Buddhabhatti <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/c8c26618f87d8451c6ffa9487809a24718bff6a7.1663589964.git.michal.simek@amd.com
|
|
Signed-off-by: Sumit Garg <[email protected]>
|
|
Since the base functionality remains the same for a reset driver on Qcom
SoCs, so leverage that to convert ipq4019 specific reset driver to a
generic Qcom reset driver. With that one just need to provide SoC specific
reset table.
Signed-off-by: Sumit Garg <[email protected]>
|
|
Add support for versal platform by adding "xlnx,versal-reset"
compatible string in zynqmp-reset driver. Reset numbering schema
for versal is not same as zynqmp, so nr_reset and reset_id are
set to zero. In case of assert/dessert, required device reset id
is sent from respective driver through struct reset_ctl.
Signed-off-by: T Karthik Reddy <[email protected]>
Signed-off-by: Ashok Reddy Soma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
The clock and reset drivers use the exact same platform data. Simplify
them by sharing the object. This is safe because the parent device
(the clock device) always gets its driver model callbacks run first.
Signed-off-by: Samuel Holland <[email protected]>
Acked-by: Andre Przywara <[email protected]>
Signed-off-by: Andre Przywara <[email protected]>
|
|
The reason here is the same as the reason for changing the clock driver:
platform data can be provided when binding the driver.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
Signed-off-by: Andre Przywara <[email protected]>
|
|
This allows all of the clock drivers to use a common bind function.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
[Andre: add F1C100s support]
Signed-off-by: Andre Przywara <[email protected]>
|
|
The I2C driver shares a reset line between buses, so allow it to test
the state of the reset line before resetting it.
Signed-off-by: Joel Stanley <[email protected]>
Reviewed-by: Ryan Chen <[email protected]>
|
|
Update SCMI reset controller driver to get its assigned SCMI channel
during initialization. This change allows SCMI reset domain protocol
to use a dedicated channel when defined in the DT. The reference is
saved in SCMI reset controller driver private data.
Signed-off-by: Etienne Carriere <[email protected]>
|
|
Changes SCMI driver API function devm_scmi_process_msg() to add
an SCMI channel reference argument for when SCMI agent supports
SCMI protocol specific channels. First argument of devm_scmi_process_msg()
is also change to point to the caller SCMI protocol device rather
than its parent device (the SCMI agent device).
The argument is a pointer to opaque struct scmi_channel known from
the SCMI transport drivers. It is currently unused and caller a pass
NULL value. A later change will enable such support once SCMI protocol
drivers have means to get the channel reference during initialization.
Cc: Lukasz Majewski <[email protected]>
Cc: Sean Anderson <[email protected]>
Cc: Jaehoon Chung <[email protected]>
Signed-off-by: Etienne Carriere <[email protected]>
|
|
In case the ops is not implemented, return 0 in the core right away.
This is better than having multiple copies of functions which just
return 0 in each reset driver. Drop all those empty functions.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
Changes devm_scmi_process_msg() first argument from target parent device
to current SCMI device and lookup the SCMI agent device among SCMI device
parents for find the SCMI agent operator needed for communication with
the firmware.
This change is needed in order to support CCF in clk_scmi driver unless
what CCF will fail to find the right udevice related to exposed SCMI
clocks.
This patch allows to simplify the caller sequence, using SCMI device
reference as parameter instead of knowing SCMI uclass topology. This
change also adds some protection in case devm_scmi_process_msg() API
function is called for an invalid device type.
Cc: Lukasz Majewski <[email protected]>
Cc: Sean Anderson <[email protected]>
Cc: Jaehoon Chung <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
Signed-off-by: Etienne Carriere <[email protected]>
|
