| Age | Commit message (Collapse) | Author |
|---|
|
In dwc3_ep0_complete_data there is a test for 'r' being null and the
code will return at that point if so. After that point 'r' is guaranteed
to not be null and testing for that is redundant. Remove the test for
'r' being non-null.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Add in the missing null check for dev->driver that is present at other
points in the function before it is dereferenced.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Add in the missing null check for udc->driver that is present at other
points in the function before it is dereferenced.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
A few of the USB musb-new host glue drivers cannot build without access
to some platform specific header files. Express those requirements in
Kconfig as well.
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
A few of the USB host drivers cannot build without access to some
platform specific header files. Express those requirements in Kconfig as
well.
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver was never enabled by any platforms after being added to the
tree over 5 years ago. Remove it.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
This driver is unused since the removal of the bcm28155_ap board in
commit 0f6807e77b07 ("arm: Remove bcm28155_ap board"). Remove it.
Fixes: 0f6807e77b07 ("arm: Remove bcm28155_ap board")
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
This driver requires some mach-at91 specific header files in order to build.
Express that requirement in Kconfig as well.
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
A few of the platform specific DWC3 host glue drivers cannot build
without access to some platform specific header files. Express those
requirements in Kconfig as well.
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Anshul Dalal <[email protected]> says:
On various TI's K3 platforms boot failure was observed on SPI NOR since the
commit 5609f200d062 ("arm: Kconfig: enable LTO for ARCH_K3"). This issue was
root caused to stack corruption by the 'udma_transfer' function. Where the local
variable 'paddr' of type 'dma_addr_t' was being written to as a 64-bit value
which overwrote the stack frame of the caller (dma_memcpy) as only 32-bits had
been reserved for paddr on the stack, specifically the r4 register in the frame
of dma_memcpy was being overwritten with a 0.
drivers/dma/ti/k3-udma.c:2192:
int udma_transfer(...)
{
...
dma_addr_t paddr = 0;
...
/* paddr was written to as 64-bit value here */
udma_poll_completion(uc, &paddr);
}
drivers/dma/dma-uclass.c:234:
int dma_memcpy(...)
{
dma_addr_t destination;
dma_addr_t source;
int ret;
...
/* This call resolves to udma_transfer */
ret = ops->transfer(...);
...
dma_unmap_single(destination, ...);
dma_unmap_single(...);
return ret;
}
Enabling LTO changed how gcc mapped local variables of dma_memcpy to CPU
registers, where earlier the bug was hidden since the overwritten register
'r4' was allotted to 'ret' but was allotted to 'destination' once LTO was
enabled. And since the overwritten value was 0, the bug remained undetected
as it just meant ret was 0, but having 'destination' set to 0 caused
dma_unmap_single to fail silently leading to boot failures.
The fix entails enabling DMA_ADDR_T_64BIT which changes dma_addr_t from u32 to
u64 for the R5 SPL thus reserving enough space for 'paddr' to prevent the
overflow.
Link: https://lore.kernel.org/r/[email protected]
|
|
dma_addr_t is used to store any valid DMA address which might not
necessarily be the same size as host architecture's word size. Though
various typecasts in k3's dma and usb driver expect dma_addr_t to be the
same size as the word size.
This leads the compiler to throw a "cast from pointer to integer of
different size" warning when the condition is not met, for example when
enabling CONFIG_DMA_ADDR_T_64BIT for the R5 core.
Therefore this patch fixes the typecasts by using 'uintptr_t' as an
intermediary type which is guaranteed to be the same size as void* on
the host architecture. Thus, eliminating the compiler warning.
Signed-off-by: Anshul Dalal <[email protected]>
|
|
- Fix issues reported by smatch
- exynos4210-origen cleanups
- e850-96 improvements
|
|
Enable support for Exynos850 SoC in DWC3 host glue layer driver.
Signed-off-by: Sam Protsenko <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Like Rockchip RK3328, RK3568 and RK3588, the RK3528 also have a single
node to represent the glue and ctrl for USB 3.0.
Use rk_ops as driver data to select correct ctrl node for RK3528 DWC3.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Like Rockchip RK3328, RK3568 and RK3588, the RK3576 also have a single
node to represent the glue and ctrl for USB 3.0.
Use rk_ops as driver data to select correct ctrl node for RK3576 DWC3.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Use 0x350e as the default USB Product ID for Rockchip RK3576, same PID
being used by the BootROM when the device is in MASKROM mode.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
This Kconfig option used spaces and not tabs for indentation. Switch to
tabs.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The rockchip usb gadget driver cannot build without platform specific
headers being available. Express that requirement in Kconfig as well.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The call to cdns3_gadget_ep_free_request will free priv_req so do the
call to list_del_init which accesses the memory pointed to by priv_req
before the free.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
Reviewed-by: Siddharth Vadapalli <[email protected]>
|
|
Use GUSBCFG_FORCEHOSTMODE to detected the HOST forced mode as it is done
in the Linux driver drivers/usb/dwc2/core.c:dwc2_core_reset().
The host polling must be executed only if the current mode is host,
either due to the force HOST mode (which persists after core reset)
or the connector id pin.
The GUSBCFG_FORCEDEVMODE bits is used to force the device mode (for
example used on STM32MP1x platform) and when it is activated the DWC2 reset
failed with the trace:
"dwc2_core_reset: Waiting for GINTSTS_CURMODE_HOST timeout"
Fixes: c5d685b8993c ("usb: dwc2: Unify flush and reset logic with v4.20a support")
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Junhui Liu <[email protected]>
Tested-by: Patrice Chotard <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
When the usb node is defined dr_mode="otg" ehci_usb_phy_mode() is called
to determine the mode from status registers.
The IMX95RM does not currently define the USBNC STATUS register but it is
assumed to be an omission as the first three registers are defined.
It has been expirimentally verified that the USBNC_PHY_STATUS register
at offset 0x23C bit4 (USBNC_PHYSTATUS_ID_DIG) reads 0 when USB_ID is GND
and 1 when floating.
Use is_imx9() as this driver works for i.MX91, i.MX93 and i.MX95 and all
of these determine the role based on the USBNC_PHY_STATUS register.
Fixes: 801b5fafd35d "(usb: ehci-mx6: Add i.MX95 support")
Signed-off-by: Tim Harvey <[email protected]>
Reviewed-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
family"
Lukasz Czechowski <[email protected]> says:
This patch series extends the usb_onboard_hub driver to allow for
support of more types of onboard hub devices, and adds the Cypress HX3
hub family.
First patch in the series updates the bind function, so that it no
longer uses hardcoded compatible strings.
Next patch simplifies the code, by removing unnecessary dm_gpio function
call.
Third patch updates the remove function, which allows the prevent issues
with usb devices reenumeration, in case of calling "usb reset". Although
the issue could still occur in case of invalid initial state of reset
gpio, it is minimized with no impact on main usb_hub driver.
Fourth patch extends the driver with support for multiple power
supplies, the same way it is done in kernel driver. Finally, last patch
provides hub data and of_match table entries for Cypress HX3
Link: https://lore.kernel.org/r/20250722-usb_onboard_hub_cypress_hx3-v4-0-91c3ee958c0e@thaumatec.com
|
|
The reset GPIO is obtained during driver probing by the function
devm_gpiod_get_optional, which means the GPIO will be automatically
freed when the device is removed. Because of this, explicit call
to free the reset GPIO in hub remove function is not needed.
To support the Managed device resources, the DEVRES config must
be enabled, otherwise the devres functions fall back to non-managed
variants. Set the necessary dependency to DEVRES in Kconfig.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Lukasz Czechowski <[email protected]>
|
|
The only thing needed from DWC3 glue layer for Exynos850 is to enable
USB clocks. The generic glue layer driver already does that. Add
Exynos850 dwc3 compatible string to enable support for this chip.
Signed-off-by: Sam Protsenko <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Rasmus Villemoes <[email protected]> says:
While looking through list.h, I saw that the regular list_* helpers
(and one of the hlist_* ones) still contain the prefetch() that was
removed in linux 14 years ago. It doesn't do anything, but makes the
macros harder to read, so get rid of it, and the fallback, no-op
definition that they relied on. That requires removing a few uses
outside list.h as well.
checkpatch warns about some whitespace issues in list.h, but as I've
copied whole kerneldoc+#define blocks directly from the linux kernel,
I think it's better to just accept that so that we don't introduce
needless diffs. The "macro argument reuse" arguments should also be
ignored, as e.g. the "member" arguments are obviously always just bare
identifiers, and the "pos" arguments must be assigned to multiple
times.
Link: https://lore.kernel.org/r/[email protected]
|
|
These all end up using the no-op prefetch() defined in linux/list.h,
because the only possible real implementation is in
arch/mips/include/asm/processor.h, which is behing
CONFIG_CPU_HAS_PREFETCH which is nowhere defined.
In order to be able to drop that fallback definition from list.h,
first remove all uses.
Signed-off-by: Rasmus Villemoes <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250616
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26704
Usb gadget:
- Atmel: Improve gadget disconnect stability by power cycling
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250616
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26704
Usb gadget:
- Fix ti_musb driver in gadget mode (with DM_USB_GADGET)
DFU:
- mmc/scsi backends when using 10 or more partitions
|
|
Contrary to the datasheet, setting both DETACH and PULLD_DIS bits to 1
does not always drive the DP and DM lines to high-impedance. This
prevents the host from reliably detecting a USB disconnect and subsequent
reconnect.
The symptom is that the first gadget command (e.g., dhcp) succeeds, while
subsequent commands (e.g., nfs) fail.
Disabling and re-enabling the controller entirely, instead of toggling the
PULLD_DIS bit, reliably generates a disconnect event.
The Linux driver works correctly because gadget_disconnect/gadget_connect
are always followed by gadget_udc_start/gadget_udc_stop. In U-Boot
pullup() is used solely.
This behavior has been observed on the SAM9X60-Curiosity and
AT91SAM9G25-EK boards and has been reported to Microchip.
Signed-off-by: Zixun LI <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[mkorpershoek: reworded commit title + comment to usba_udc_pullup()]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Remove duplicate .ops assignment that was overriding the correct
ti_musb_gadget_ops with musb_usb_ops (host ops) in the ti_musb_peripheral
driver. This was causing U-Boot crashes when trying to call the
handle_interrupts operation since the wrong ops structure was being used.
Fixes: 7d98dbcc3dc ("usb: musb-new: Add support for DM_USB")
Fixes: 281eaf1ed83a ("usb: gadget: musb: Convert interrupt handling to usb_gadget_generic_ops")
Signed-off-by: Kory Maincent <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
This function is currently a misnomer at times as we have cases where it
passes arguments to the image. In preparation for making that be a more
common case rename this function to jump_to_image(...). In order to do
this, rename jump_to_image in board_init_r(...) to jumper so that we do
not have a conflict.
Signed-off-by: Simon Glass <[email protected]>
[trini: Reword the commit message, adding missing cases of
jump_to_image_no_args()]
Signed-off-by: Tom Rini <[email protected]>
|
|
Refactor DWC2 USB gadget driver to replace manual read-modify-write
operations with `clrsetbits_le32`, `setbits_le32`, and `clrbits_le32`
macros, which simplify the code and improve readability.
Signed-off-by: Junhui Liu <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Link: https://lore.kernel.org/r/20250126-dwc2-clrsetbits-refactor-v1-1-68c27e1b6f84@pigmoral.tech
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Updates all instances of uint8_t, uint16_t, and uint32_t to u8, u16, and
u32 respectively, ensuring consistent use of kernel-preferred types and
resolving checkpatch.pl warnings.
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
This patch merges flush and reset logic for both host and gadget code
into a common set of functions, reducing duplication. It also adds support
for the updated reset logic to compatible with core version since v4.20a.
This patch mainly refers to the patch in the kernel.
link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=65dc2e725286106f99c6f6b78e3d9c52c15f3a9c
Signed-off-by: Kongyang Liu <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Some macros are shared between host and gadget code, causing duplicated
definitions. Move DWC2 macro definitions from host and gadget code into a
common header to reduce duplication.
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Update the DWC2 macros to match those used in the Linux kernel, making
it easier to synchronize updates with kernel. Also removed some unused
macros to cleanup the code.
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Use FIELD_PREP, FIELD_GET, BIT, and GENMASK macros to standardize bit
manipulation across the DWC2 code, improving readability and
maintainability without altering functionality.
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
The loop used to calculate HBstLen for extern DMA mode does not produce
the correct result according to the datasheet [1]. Replacing that loop
with a direct calculation using LOG2 to correctly assign the burst length
in the GAHBCFG register for external DMA mode.
[1] https://rockchip.fr/RK312X%20TRM/chapter-26-usb-otg-2-0.pdf#page=24
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
The ULPI_UTMI_SEL bit in the DWC2 driver was set incorrectly. According
to the datasheet [1], this bit should be set to 0 for UTMI interface and 1
for ULPI interface. The existing code had this logic reversed,
causing the interface selection to be incorrect.
This commit corrects the ULPI_UTMI_SEL bit setting to match the
datasheet's description. Referencing the kernel's code [2] also confirms
this fix.
[1] https://rockchip.fr/RK312X%20TRM/chapter-26-usb-otg-2-0.pdf#page=30
[2] https://github.com/torvalds/linux/blob/v6.13-rc3/drivers/usb/dwc2/core.c#L1106
Reviewed-by: Marek Vasut <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
The same registers are accessed in both the otg and gatet drivers of
dwc2, and these registers are repeatedly defined in these two parts.
Extract register definitions into a common header file to reduce
redundancy and make the code more maintainable.
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
The way we enable ULPI support today isn't something that should work.
The "optional" keyword in a choice statement is not a documented
feature. To make this work in a supported way, make USB_ULPI something
we ask about if USB_HOST is set. Next, we move the choice of what
viewer to use to be after the framework portion and to depend on that.
We then borrow a few words from the top-level README to make the help
text here clearer. Finally we make the Qualcomm driver select ULPI as
it's required and we make the tegra driver not duplicate a check that
Kconfig now handles for us.
Signed-off-by: Tom Rini <[email protected]>
|
|
The last platform to enable this driver was removed in 2019. Remove this
unused code and documentation now.
Signed-off-by: Tom Rini <[email protected]>
|
|
dwc3_core_init loops 'timeout' times to check if the IP block is out
of reset using 'while (timeout--)'. If there is some issue and
the block doesn't come out of reset, the loop will run till
'timeout' becomes zero and the post decrement operator would set
timeout to 0xffffffff. Though the IP block is not out reset, the
subsequent if check 'if !timeout' would fail as timeout is not
equal to zero and the function proceeds with the initialization.
Use poll API instead to resolve this.
Signed-off-by: Varadarajan Narayanan <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-20250425
Usb gadget:
- Fix ACM gadget release
- Allow ACM gadget restart after releasing it
- Add 'enabled' flag to usb_ep structure
DFU:
- Fix alt buffer clearing for DeveloperBox board
|
|
Jerome Forissier <[email protected]> says:
This series introduces threads and uses them to improve the performance
of the USB bus scanning code and to implement background jobs in the
shell via two new commands: 'spawn' and 'wait'.
The threading framework is called 'uthread' and is inspired from the
barebox threads [2]. setjmp() and longjmp() are used to save and
restore contexts, as well as a non-standard extension called initjmp().
This new function is added in several patches, one for each
architecture that supports HAVE_SETJMP. A new symbol is defined:
HAVE_INITJMP. Two tests, one for initjmp() and one for the uthread
scheduling, are added to the lib suite.
After introducing threads and making schedule() and udelay() a thread
re-scheduling point, the USB stack initialization is modified to benefit
from concurrency when UTHREAD is enabled, where uthreads are used in
usb_init() to initialize and scan multiple busses at the same time.
The code was tested on arm64 and arm QEMU with 4 simulated XHCI buses
and some devices. On this platform the USB scan takes 2.2 s instead of
5.6 s. Tested on i.MX93 EVK with two USB hubs, one ethernet adapter and
one webcam on each, "usb start" takes 2.4 s instead of 4.6 s.
Finally, the spawn and wait commands are introduced, allowing the use of
threads from the shell. Tested on the i.MX93 EVK with a spinning HDD
connected to USB1 and the network connected to ENET1. The USB plus DHCP
init sequence "spawn usb start; spawn dhcp; wait" takes 4.5 seconds
instead of 8 seconds for "usb start; dhcp".
[1] https://patchwork.ozlabs.org/project/uboot/list/?series=446674
[2] https://github.com/barebox/barebox/blob/master/common/bthread.c
Link: https://lore.kernel.org/r/[email protected]
|
|
Use the uthread framework to initialize and scan USB buses in parallel
for better performance. The console output is slightly modified with a
final per-bus report of the number of devices found, common to UTHREAD
and !UTHREAD. The USB tests are updated accordingly.
Tested on two platforms:
1. arm64 QEMU on a somewhat contrived example (4 USB buses, each with
one audio device, one keyboard, one mouse and one tablet)
$ make qemu_arm64_defconfig
$ make -j$(nproc) CROSS_COMPILE="ccache aarch64-linux-gnu-"
$ qemu-system-aarch64 -M virt -nographic -cpu max -bios u-boot.bin \
$(for i in {1..4}; do echo -device qemu-xhci,id=xhci$i \
-device\ usb-{audio,kbd,mouse,tablet},bus=xhci$i.0; \
done)
2. i.MX93 EVK (imx93_11x11_evk_defconfig) with two USB hubs, each with
one webcam and one ethernet adapter, resulting in the following device
tree:
USB device tree:
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Hub (480 Mb/s, 100mA)
| GenesysLogic USB2.1 Hub
|
+-3 Vendor specific (480 Mb/s, 350mA)
| Realtek USB 10/100/1000 LAN 001000001
|
+-4 (480 Mb/s, 500mA)
HD Pro Webcam C920 8F7CD51F
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Hub (480 Mb/s, 100mA)
| USB 2.0 Hub
|
+-3 Vendor specific (480 Mb/s, 200mA)
| Realtek USB 10/100/1000 LAN 000001
|
+-4 (480 Mb/s, 500mA)
Generic OnLan-CS30 201801010008
Note that i.MX was tested on top of the downstream repository [1] since
USB doesn't work in the upstream master branch.
[1] https://github.com/nxp-imx/uboot-imx/tree/lf-6.6.52-2.2.0
commit 6c4545203d12 ("LF-13928 update key for capsule")
The time spent in usb_init() ("usb start" command) is reported on
the console. Here are the results:
| CONFIG_UTHREAD=n | CONFIG_UTHREAD=y
--------+------------------+-----------------
QEMU | 5628 ms | 2212 ms
i.MX93 | 4591 ms | 2441 ms
Signed-off-by: Jerome Forissier <[email protected]>
|
|
To prepare for the introduction of threads in the USB initialization
sequence, move code out of usb_init() into a new helper function:
usb_init_bus() and count the number of USB controllers initialized
successfully by using the DM device_active() function.
Signed-off-by: Jerome Forissier <[email protected]>
|
|
Rockchip RK3528 is a ARM-based SoC with quad-core Cortex-A53.
Add initial arch support for the RK3528 SoC.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
When using IOMUX, the "usbacm" console can be added/removed dynamically
from the stdout/stderr/stdin environment variables to allow temporarily
starting other USB gadgets (e.g. Fastboot).
However, right now acm_stdio_stop() does not completely undo
acm_stdio_start(): The USB gadget is unregistered, but as long as dev->priv
stays set acm_stdio_start() will never register the USB gadget again.
Clear dev->priv after we detach to make sure a start operation after a stop
operation registers the gadget again.
Fixes: fc2b399ac03b ("usb: gadget: Add CDC ACM function")
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
U-Boot has an older version of the Linux gadget API, where USB endpoints
returned by usb_ep_autoconfig() are not automatically claimed. As written
in the documentation comment:
"To prevent the endpoint from being returned by a later autoconfig call,
claim it by assigning ep->driver_data to some non-null value."
Right now f_acm doesn't do that, which means that e.g. ep_in and ep_notify
may end up being assigned the same endpoint. Surprisingly, the ACM console
is still somehow working, but this is not the expected behavior. It will
break with a later commit that disallows calling usb_ep_enable() multiple
times.
Fix this by assigning some data to ep->driver_data, similar to the other
gadget drivers.
Fixes: fc2b399ac03b ("usb: gadget: Add CDC ACM function")
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
