| Age | Commit message (Collapse) | Author |
|---|
|
MTRR functionality is available only on x86, so this driver cannot be compiled
on other architectures. Fix this with preprocessor directives.
Signed-off-by: Yuri Zaporozhets <[email protected]>
|
|
Fix compile warning with !CONFIG_FDT_64BIT by
casting the variable in the debug print.
Signed-off-by: Eva Kurchatova <[email protected]>
Reported-by: Leo Yu-Chi Liang <[email protected]>
|
|
When starting a new text line, an assumption is made that the current
vertical position is a multiple of the character height. When this is
not true, characters can be written after the end of the framebuffer.
This can causes crashes and strange errors from QEMU.
Adjust the scrolling check when processing a newline character, to
avoid any problems.
Add some comments to make things a little clearer.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is useful for highlighting something with a black background, as
is needed with cedit when using a white-on-black console. Add this as
a new colour.
Signed-off-by: Simon Glass <[email protected]>
|
|
If the regulator is already enabled, this happens if the regulator
is set in regulator-always-on, regulator_set_enable() return -EALREADY.
Ignore the -EALREADY return since it's not an error.
Suggested-by: Jonas Karlman <[email protected]>
Link: https://lore.kernel.org/r/20241009-u-boot-video-fix-hdmi-supply-already-on-v2-1-4478a28d1f49@linaro.org
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Assorted Tegra enhancements. Merged with the recent XPL_BUILD changes,
resolve some whitespace issues and fix the name of the new apalis-tk1
env file by Tom.
Signed-off-by: Tom Rini <[email protected]>
|
|
This module is a color active matrix LCD module incorporating
Oxide TFT (Thin Film Transistor). It is composed of a color TFT-LCD
panel, driver ICs, a control circuit and power supply circuit, and
a backlight unit. Graphics and texts can be displayed on a 2560×1600
dots panel with (16,777,216) colors by using MIPI DUAL DSI interface,
supplying +3.3V DC supply voltage for TFT-LCD panel driving and
supplying DC supply voltage for LED Backlight.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Implement ganged mode support for the Tegra DSI driver. The DSI host
controller to gang up with is specified via a phandle in the device tree
and the resolved DSI host controller used for the programming of the
ganged-mode registers.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
It seems that DECLARE_GLOBAL_DATA_PTR use is not needed and video system
works perfectly fine without it.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <[email protected]>
|
|
Use XPL_ as the symbol to indicate an SPL build. This means that SPL_ is
no-longer set.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rename this function to indicate that it refers to any xPL phase.
Signed-off-by: Simon Glass <[email protected]>
|
|
This field is not used, so don't set it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This field is not used, so don't set it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is handled by driver model so this driver should not be setting the
framebuffer address. Drop the assignment.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is not used, so don't set it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is not used, so don't set it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a new function which returns the framebuffer address of the first
video device. This will allow the global_data field top be dropped.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present U-Boot flushes the cache after every character written to
the display. This makes the command-line slower, to the point that
pasting in long strings can fail.
Add a cyclic function to sync the display every 10ms. Enable this by
default.
Allow much longer times for sandbox, since the SDL display is quite
slow.
Avoid size growth if the feature is disabled by making the new init and
destroy functions dependent on CYCLIC being enabled.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rather than using a static variable, use the video device's private
data to remember when the last video sync was completed. This allows
each display to have its own sync and avoids using static data in SPL.
Signed-off-by: Simon Glass <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Use existing nvidia,head device tree property to get DC controller id.
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Reviewed-by: Peter Robinson <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Michal Simek <[email protected]> says:
I looked as cleaning up some dependencies and I found that qconfig is
reporting some issues. This series is fixing some of them. But there are
still some other pending. That's why please go and fix them if they are
related to your board.
UTF-8: I am using uni2ascii -B < file to do conversion. When you run it in
a loop you will find some other issue with copyright chars or some issues
in files taken from the Linux kernel like DTs. They should be likely fixed
in the kernel first.
Based on discussion I am ignoring names too.
|
|
Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or
names are converted.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Acked-by: Marek Behún <[email protected]>
|
|
If SPL is passing video handoff structure to U-boot then it is safe to
assume that SPL has already enabled video and that's why it is passing
video handoff structure to U-boot so that U-boot can preserve the
framebuffer.
Signed-off-by: Devarsh Thakkar <[email protected]>
Reviewed-by: Nikhil M Jain <[email protected]>
|
|
simplefb was using old style FDT parsing which doesn't behave well in
combination with livetree. Update it to use ofnode instead and add a
missing null check for the "format" property.
Standardise the error logging while we're here.
Fixes: 971d7e64245d ("video: simplefb")
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Shift all setup stages one step earlier to better fit the
existing uclass.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Shift all setup stages one step earlier to better fit the
existing uclass.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Shift all setup stages one step earlier to better fit the
existing uclass.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
The Parade DP501 is a DP & DVI/HDMI dual-mode transmitter. It
enables an RGB/Parallel SOC output to be converted, packed and
serialized into either DP or TMDS output device. Only DisplayPort
functionality of this transmitter has been implemented and tested.
Signed-off-by: Jonas Schwöbel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Add initial support for the Toshiba TC358768 RGB to DSI bridge.
The driver is based on the mainline Linux Toshiba TC358768
bridge driver and implements the same set of features.
Tested-by: Andreas Westman Dorcsak <[email protected]> # ASUS TF700T
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
LTL106HL02 is a color active matrix TFT (Thin Film Transistor)
liquid crystal display (LCD) that uses amorphous silicon TFT as
switching devices. This model is composed of a TFT LCD panel, a
driver circuit and a backlight unit. The resolution of a 10.6"
contains 1920 x 1080 pixels and can display up to 16,8M color
with wide viewing angle.
Co-developed-by: Jonas Schwöbel <[email protected]>
Signed-off-by: Jonas Schwöbel <[email protected]>
Co-developed-by: Svyatoslav Ryhel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Signed-off-by: Anton Bambura <[email protected]>
|
|
The LD070WX3 is a Color Active Matrix Liquid Crystal Display with
an integral Light Emitting Diode (LED) backlight system. The
matrix employs a-Si Thin Film Transistor as the active element. It
is a transmissive type display operating in the normally Black
mode. This TFT-LCD has 7.0 inches diagonally measured active
display area with WXGA resolution (800 by 1280 pixel array).
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Shift the backlight set further to prevent visual glitches on
panel init.
Signed-off-by: Jonas Schwöbel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
|
|
According to Thierry Reding's commit in the linux kernel
976cebc35bed0456a42bf96073a26f251d23b264
"drm/tegra: dsi: Make FIFO depths host parameters"
correct depth of the video FIFO is 1920 *words* no *bytes*
Tested-by: Ion Agorria <[email protected]> # HTC One X
Tested-by: Svyatoslav Ryhel <[email protected]> # Nvidia Tegratab T114
Signed-off-by: Jonas Schwöbel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
|
|
Configuration for DC driver command mode is not required for
every panel. Removed.
Tested-by: Ion Agorria <[email protected]> # HTC One X
Tested-by: Svyatoslav Ryhel <[email protected]> # Nvidia Tegratab T114
Signed-off-by: Jonas Schwöbel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
|
|
Implement reset use to discard any changes which could have been
applied to DSI before and can interfere with current configuration.
Tested-by: Ion Agorria <[email protected]> # HTC One X
Tested-by: Svyatoslav Ryhel <[email protected]> # Nvidia Tegratab T114
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Existing Tegra DSI driver mostly fits T114 apart MIPI calibration
which on T114 has dedicated driver. To resolve this MIPI calibration
logic was split for pre-T114 and T114+ devices.
Tested-by: Ion Agorria <[email protected]> # HTC One X
Tested-by: Svyatoslav Ryhel <[email protected]> # Nvidia Tegratab T114
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
|
|
Dedicated MIPI calibration driver is used on T114 and newer. Before
T114 MIPI calibration registers were part of VI and CSI.
Tested-by: Svyatoslav Ryhel <[email protected]> # Nvidia Tegratab T114
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
|
|
Based on Thierry Reding's Linux commit:
'commit 1716b1891e1de05e2c20ccafa9f58550f3539717
("drm/tegra: rgb: Parameterize V- and H-sync polarities")'
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
|
|
Fill the framebuffer memory with zeros to avoid visual glitches.
Signed-off-by: Jonas Schwöbel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
|
|
The goal of panel_set_backlight() is to enable backlight. Hence,
it should be called at the probe end.
Signed-off-by: Jonas Schwöbel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
|
|
Framebuffer address should not be a pointer.
Signed-off-by: Jonas Schwöbel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
If DISP1 is a PLLD/D2 child, it cannot go over 370MHz. The cause
of this is not quite clear. This can be overcomed by further
halving the PLLD/D2 if the target parent rate is over 800MHz.
This way DISP1 and DSI clocks will have the same frequency. The
shift divider in this case has to be calculated from the
original PLLD/D2 frequency and is passed from the DSI driver.
Tested-by: Andreas Westman Dorcsak <[email protected]> # ASUS Grouper E1565
Tested-by: Ion Agorria <[email protected]> # HTC One X
Tested-by: Svyatoslav Ryhel <[email protected]> # Nvidia Tegratab T114
Tested-by: Jonas Schwöbel <[email protected]> # Microsoft Surface 2
Signed-off-by: Jonas Schwöbel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Acked-by: Thierry Reding <[email protected]>
|
|
Add powergate use on T114 to complete resetting of DC.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
|
|
T30+ SOC have second PLLD - PLLD2 which can be actively used by
DC and act as main DISP1/2 clock parent.
Tested-by: Agneli <[email protected]> # Toshiba AC100 T20
Tested-by: Robert Eckelmann <[email protected]> # ASUS TF101
Tested-by: Andreas Westman Dorcsak <[email protected]> # ASUS Grouper E1565
Tested-by: Ion Agorria <[email protected]> # HTC One X
Tested-by: Svyatoslav Ryhel <[email protected]> # Nvidia Tegratab T114
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
|
|
Tegra SoC has 2 independent display controllers called DC_A and
DC_B, they are handled differently by internal video devices like
DSI and HDMI controllers so it is important for last to know
which display controller is used to properly set up registers.
To achieve this, a pipe field was added to pdata to pass display
controller id to internal Tegra SoC devices.
Tested-by: Agneli <[email protected]> # Toshiba AC100 T20
Tested-by: Robert Eckelmann <[email protected]> # ASUS TF101
Tested-by: Andreas Westman Dorcsak <[email protected]> # ASUS Grouper E1565
Tested-by: Ion Agorria <[email protected]> # HTC One X
Tested-by: Svyatoslav Ryhel <[email protected]> # Nvidia Tegratab T114
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
