| Age | Commit message (Collapse) | Author |
|---|
|
Enable CONFIG_USB_ETHER_RTL8152 support for Odroid XU4 which
has support for RTL8153-CG gigabit Ethernet adapter,
connected over USB 3.0.
commit 9dc8ba19c50fc0b1623c654bcfe6caa903a4c36c added support
for Realtek 8152/8153 driver.
Signed-off-by: Anand Moon <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
- Add required UBI/UBIFS config definitions
- Add reasonable MTD partition layout
- Remove JFFS2 config definitions
- Drop some CFI verbage and definitions
- Make comment 'one-liners' truly one line
- Improve readability and content arrangement
Signed-off-by: Derald D. Woods <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Select 8-bit BCH ecc-scheme with s/w based error correction
- OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
Signed-off-by: Derald D. Woods <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Move to booting a zImage kernel by default to align with the other
i.MX boards.
While at it, adjust the fdt_addr so that we can boot a standard
mainline kernel.
Signed-off-by: Fabio Estevam <[email protected]>
|
|
"fastboot oem format" command reuses "gpt write" command, which in turn
requires correct partitions defined in $partitions variable. This patch
adds such definition of Android partitions for DRA7XX EVM board.
By default $partitions variable contains Linux partition table. In order
to prepare Android environment one can run next commands from U-Boot
shell:
=> env set partitions $partitions_android
=> env save
After those operations one can go to fastboot mode and perform
"fastboot oem format" to create Android partition table.
While at it, enable CONFIG_RANDOM_UUID to spare user from providing
UUIDs for each partition manually.
Signed-off-by: Sam Protsenko <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
This introduces some minor cleanups, regarding aspects such as board name, code
and headers organization as well as deprecated and missing config options.
Signed-off-by: Paul Kocialkowski <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
There are a number of AMCC platforms which are close to, or with some
toolchains exceeding, the size constraints. Disable CONFIG_SYS_LONGHELP
to get us room to build with again.
Signed-off-by: Tom Rini <[email protected]>
|
|
Of the several boot devices supported, it looks like the eMMC is the
most commonly used. Enable CONFIG_ENV_IS_IN_MMC by default.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
The Boot ROM expects the boot image (SPL) in the Boot Partition 1.
So, updating images involves the hardware partition switch. It might
be a bit advanced for some users.
To be user-friendly, this commit adds a useful command to update the
images; just put SPL and U-Boot proper into the public directory of
the TFTP server and execute "run emmcupdate" from the command line.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Export device nodes needed for eMMC boot (eMMC node, pinctrl, and
clock) to the SPL DTB. CONFIG_SUPPORT_EMMC_BOOT is also necessary
to use "mmc partconf" command.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Enable the driver in all UniPhier defconfig files and add some
needed defines to the common files.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
The patch that enabled eSDHC peripheral clock support had an
obvious error as below. This patch is used to fix it.
+#define define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
Fixes: 3285e6cbcc1b ("powerpc/t2080qds: enable eSDHC peripheral clock support")
Signed-off-by: Yangbo Lu <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
This allows all the hush tests implemented in test/py to pass, under qemu
at least.
Signed-off-by: Stephen Warren <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Compile DCC serial driver by default.
Signed-off-by: Michal Simek <[email protected]>
|
|
|
|
|
|
|
|
Scrolling the simple framebuffer is really slow in Raspberry Pi to the
point it delays the boot by a second or two and makes longer output
inconvenient to follow (printenv, md).
Signed-off-by: Lubomir Rintel <[email protected]>
Acked-by: Stephen Warren <[email protected]>
|
|
Commit 755324 (configs: Use config_distro_defaults.h in ti_armv7_common.h)
made ti_armv7_common.h include config_distro_defaults.h. This breaks the
bootdelay feature in cm_t43 because now the
- #include ti_armv7_common.h (#define CONFIG_BOOTDELAY 1)
- #undef CONFIG_BOOTDELAY
- #include config_distro_defaults.h (#define CONFIG_BOOTDELAY 2)
dance in cm_t43.h is no longer valid and in fact leads to CONFIG_BOOTDELAY
not being defined.
Adapt the config file to the new inclusion hierarchy.
Cc: Tom Rini <[email protected]>
Cc: Albert Aribaud <[email protected]>
Cc: Igor Grinberg <[email protected]>
Signed-off-by: Nikita Kiryanov <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Update U-Boot offset and size for raw mmc boot.
Cc: Tom Rini <[email protected]>
Cc: Albert Aribaud <[email protected]>
Cc: Igor Grinberg <[email protected]>
Signed-off-by: Nikita Kiryanov <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
During boot, U-Boot raises the CPU frequency but the CORE and MPU regulators
are not updated. This is not a problem in cold boot since the default values
that the pmic outputs are correct, but if Linux were to switch the module to a
low power OPP, the new voltage values will be retained after a reboot and the
module will likely hang once U-Boot raises the CPU frequency back up.
Set both CORE and MPU regulators to to 1.1V on boot.
Cc: Tom Rini <[email protected]>
Cc: Albert Aribaud <[email protected]>
Cc: Igor Grinberg <[email protected]>
Signed-off-by: Nikita Kiryanov <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Add full support for SPI flash chips to future-proof U-Boot for cm-t43.
Cc: Tom Rini <[email protected]>
Cc: Albert Aribaud <[email protected]>
Cc: Igor Grinberg <[email protected]>
Signed-off-by: Nikita Kiryanov <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Move CONFIG_DM_SERIAL to cm_t43_defconfig. This forces us to update the
CONFIG_SYS_NS16550_REG_SIZE value for SPL.
Cc: Tom Rini <[email protected]>
Cc: Albert Aribaud <[email protected]>
Cc: Igor Grinberg <[email protected]>
Signed-off-by: Nikita Kiryanov <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
spl_board_init() is necessary for boot. Remove the #undef that keeps
it out of the boot sequence.
Cc: Tom Rini <[email protected]>
Cc: Albert Aribaud <[email protected]>
Cc: Igor Grinberg <[email protected]>
Signed-off-by: Nikita Kiryanov <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
- fixup typo
- fixup identation
Signed-off-by: Hannes Schmelzer <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
bur_am335x_common.h today holds all common configuration which is shared
over all B&R boards.
In future we want to bring up boards which are not based on AM335x only
but we still want to have common configuration over all B&R boards
independent from their architecture.
To prepare this we introduce a new file "bur_cfg_common.h", where we
move all common things, which are not architecture specific, from
bur_am335x_common.h.
On B&R am335x boards we include from now:
#include <configs/bur_cfg_common.h>
#include <configs/bur_am335x_common.h>
On other B&R boards, we include only
#include <configs/bur_cfg_common.h>
Signed-off-by: Hannes Schmelzer <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
We drop everything possible things from board headerfiles and replace
this functionality with responsible settings in Kconfig (_defconfig).
Signed-off-by: Hannes Schmelzer <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
During very early prototype-phase we did boot the AM335x boards
initially from CPSW-EMAC.
Now we don't need this feature anymore.
So we drop it to save MLO-space and having therefore a more quickly
boot.
Signed-off-by: Hannes Schmelzer <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Logic PD makes four different system on modules. This patch will auto
detect the board type and identify the corresponding device tree image.
V2:
Added 'default:' case to switch statement
Since board_late_init() is defined as int, we now return 0
Signed-off-by: Derald Woods <[email protected]>
Signed-off-by: Adam Ford <[email protected]>
|
|
This patch adds support for stm32f7 family & stm32f746 board.
Signed-off-by: Vikas Manocha <[email protected]>
|
|
Add the missing CONFIG_BUILD_TARGET to get u-boot-with-spl.sfp built
automatically upon running make in the source tree.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Denis Bakhvalov <[email protected]>
|
|
Don't understand how it happened, but this change got applied twice!
Therefore, removing the duplicated items.
Signed-off-by: Steve Rae <[email protected]>
|
|
transmission and storage
As tested on the Odroid XU3, large files to be stored on the file system
require considerable time to be physically written to the medium.
The default 300 ms is not enough to store large file (e.g. 26 MiB).
To fix this situation the DFU_MANIFEST_POLL_TIMEOUT has been defined.
It is used to cease the communication with dfu-util and allow the target
board to store the data on file system.
Signed-off-by: Lukasz Majewski <[email protected]>
|
|
Signed-off-by: Zhao Qiang <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
Add USB XHCI support for ls1043qds board.
Signed-off-by: Gong Qianyu <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
Before Linux boot DPL must be deployed to DPAA2 interface.
So update bootcmd env variable to make sure DPL deployment before
Linux boot.
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
Define mcinitcmd env variable to load Management complex during
u-boot boot sequence.
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported
in SD boot now. For the customer's demand, QSPI needs to be supported
in SD boot too.
This patch adds QSPI or IFC support in SD boot according to the
corresponding defconfig. For detail, ls1021aqds_sdcard_ifc_defconfig
is used to support IFC in SD boot and ls1021aqds_sdcard_qspi_defconfig
is used to support QSPI in SD boot.
Signed-off-by: Alison Wang <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
Increase default hugepage count to 256 from 16
Signed-off-by: Ashish Kumar <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
|
|
Add support for phy 1-3.
Signed-off-by: Jelle van der Waa <[email protected]>
[[email protected]: use setclrbits_le32 instead of read-modify-write]
Signed-off-by: Hans de Goede <[email protected]>
|
|
SY8106A is a PMIC which is used on the Allwinner
H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is
implemented to set the default V-CPU voltage to 1200 mV.
This driver is required to ensure the SY8106A V-CPU
voltage is set to 1200 mV after a software reset. On cold
boot the default SY8106A output voltage is selected to be
1200 mV by a pair of resistors on the Orange Pi PC and Plus.
Signed-off-by: Jelle van der Waa <[email protected]>
Tested-by: Siarhei Siamashka <[email protected]>
Acked-by: Siarhei Siamashka <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Split duart configuration as device tree file. Move /chosen node
out of board commone device tree. Convert ls1021aqds nor and SD
configurations to driver model support (qspi already uses DM).
Enable ns16550 DM serial driver for nor configurations.
Signed-off-by: York Sun <[email protected]>
CC: Alison Wang <[email protected]>
CC: Bin Meng <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Alison Wang <[email protected]>
|
|
|
|
Extend options for saving variables to QSPI.
Reviewed-by: Jagan Teki <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
|
|
Zybo contains on board HDMI that's why enable EDID.
Doing it via config because zynq i2c driver hasn't been moved to DM yet
and enabling via Kconfig requires DM_I2C.
This will be moved that driver is moved to DM.
Signed-off-by: Michal Simek <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
|
|
This phy is available at Zybo board.
Signed-off-by: Michal Simek <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
|
|
Remove the miss-placed \0 and add missing ; for usbboot env variable.
Signed-off-by: Jason Wu <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
|
|
Use RAM support in jtagboot mode.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Moritz Fischer <[email protected]>
|
|
Remove CONFIG_ZYNQ_BOOT_FREEBSD configuration option and setup
CONFIG_SYS_MMC_MAX_DEVICE 1 for all Zynq boards.
Signed-off-by: Michal Simek <[email protected]>
|
