summaryrefslogtreecommitdiff
path: root/include/dt-bindings/reset
AgeCommit message (Collapse)Author
2023-01-06Merge tag 'u-boot-at91-2023.04-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2023.04 cycle: This feature set includes the new DM-based NAND flash driver (old non-DM driver is still kept for backwards compatibility), and the move to DM NAND flash driver for sam9x60ek board. Feature set also includes devicetree alignment for sama7g5 with Linux, devicetree alignment on USB with Linux for all boards (sama5, sam9x60), chip id for sama7g5, minor configs and tweaks.
2023-01-05dt-bindings: reset: add sama7g5 definitionsSergiu Moga
Upstream linux commit 5994f58977e0. Add reset bindings for SAMA7G5. At the moment only USB PHYs are included. The three reset USB phy's have their ID's mapped from 4 to 6. There are no USB phy's with ID's numbered from 0 to 3. Signed-off-by: Sergiu Moga <[email protected]>
2022-12-07dt-bindings: stm32mp13: add clock & reset support for STM32MP13Gabriel Fernandez
Add support of stm32mp13 DT bindings of clock and reset. Signed-off-by: Gabriel Fernandez <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-11-08imx8mp: synchronise device tree with linuxMarcel Ziswiler
Synchronise device tree with linux v6.1-rc3. Signed-off-by: Marcel Ziswiler <[email protected]> Tested-By: Tim Harvey <[email protected]> #imx8m{m,n,p}-venice-*
2022-11-08imx8mq: synchronise device tree with linuxMarcel Ziswiler
Synchronise device tree with linux v6.1-rc3. Signed-off-by: Marcel Ziswiler <[email protected]>
2022-11-08imx8ulp: synchronise device tree with linuxMarcel Ziswiler
Synchronise device tree with linux v6.1-rc3. Signed-off-by: Marcel Ziswiler <[email protected]>
2022-10-06arm: nuvoton: Add support for Nuvoton NPCM845 BMCJim Liu
Add basic support for the Nuvoton NPCM845 EVB (Arbel). Signed-off-by: Jim Liu <[email protected]>
2022-07-26dt-bindings: versal: Add versal reset IDsMichal Simek
The same file is already the part of Linux kernel that's why add it also to u-boot to be able to use it in source code and DT files. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/1c3bc464536a9bf64a2e8bfe18a938c9cb490620.1657192249.git.michal.simek@amd.com
2022-07-13reset: mtmips: add reset controller support for MediaTek MT7621 SoCWeijie Gao
This patch adds reset controller bits definition header file for MediaTek MT7621 SoC Signed-off-by: Weijie Gao <[email protected]>
2022-07-12ARM: dts: stm32mp15: alignment with v5.19Patrick Delaunay
Device tree alignment with Linux kernel v5.19-rc1 - ARM: dts: stm32: Add alternate pinmux for ethernet0 pins - ARM: dts: stm32: Add alternate pinmux for mco2 pins - ARM: dts: stm32: fix pinctrl node name warnings (MPU soc) - ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group - dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 - dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 - dt-bindings: clock: stm32mp15: rename CK_SCMI define - dt-bindings: reset: stm32mp15: rename RST_SCMI define - dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 - dt-bindings: clk: cleanup comments - ARM: dts: align SPI NOR node name with dtschema - ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15 - ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) - ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 + patch from stm32-dt-for-v5.19-fixes-2 - ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 - ARM: dts: stm32: fix pwr regulators references to use scmi - ARM: dts: stm32: use the correct clock source for CEC on stm32mp151 - ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board - ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI - ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15 Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-05-23dt-bindings: sunxi: Update clock/reset binding headersSamuel Holland
Some devicetree updates make use of newly-exposed clocks and resets. To support that, copy the binding headers from the Linux v5.18-rc1 tag. Signed-off-by: Samuel Holland <[email protected]>
2022-05-05arm: nuvoton: Add support for Nuvoton NPCM750 BMCJim Liu
Add basic support for the Nuvoton NPCM750 EVB (Poleg). Signed-off-by: Jim Liu <[email protected]>
2022-02-04ARM: dts: suniv: Add device tree files and bindings for F1C100sIcenowy Zheng
Add device tree files for suniv and Lichee Pi Nano it is a board based on F1C100s. dt-bindings/dts are synced with 5.16.0 Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Jesse Taube <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Signed-off-by: Andre Przywara <[email protected]>
2021-05-31riscv: dts: add fu740 supportGreen Wan
Add dts support for fu740. The HiFive Unmatched support is based on fu740 cpu and drivers in following patch set. Signed-off-by: Green Wan <[email protected]> [greentime.hu: set fu740 speed to 1.2GHz] Signed-off-by: Greentime Hu <[email protected]> Reviewed-by: Bin Meng <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-01-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- New Allwinner H616 SoC support (sans Ethernet & USB) - H6 DT update - Tanix TX6 TV box support - OrangePi 3 support - OrangePi Zero2 (H616) support
2021-01-25arm: sunxi: add initial H616 DTSI and headersJernej Skrabec
This commit introduces H616 DTSI file and dt-bindings headers needed for device tree files. Files are taken from v3 Linux H616 support submission[1], as the H616 .dtsi file is not merged upstream yet. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/632082.html Signed-off-by: Jernej Skrabec <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Signed-off-by: Andre Przywara <[email protected]>
2021-01-24reset: mtmips: add reset controller support for MediaTek MT7620 SoCWeijie Gao
This patch adds reset controller bits definition header file for MediaTek MT7620 SoC Reviewed-by: Stefan Roese <[email protected]> Signed-off-by: Weijie Gao <[email protected]>
2021-01-18reset: aspeed: Add AST2600 reset supportChia-Wei, Wang
Add controller reset support through the System Control Unit (SCU) of AST2600 SoC. Signed-off-by: Chia-Wei, Wang <[email protected]> Reviewed-by: Ryan Chen <[email protected]>
2020-11-25reset: stm32: Add support of MCU HOLD BOOTPatrick Delaunay
Handle the register RCC_MP_GCR without SET/CLR registers but with a direct access to bit BOOT_MCU: - deassert => set the bit: The MCU will not be in HOLD_BOOT - assert => clear the bit: The MCU will be set in HOLD_BOOT With this patch the RCC driver handles the MCU_HOLD_BOOT_R value added in binding stm32mp1-resets.h Cc: Fabien DESSENNE <[email protected]> Cc: Arnaud POULIQUEN <[email protected]> Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-11-17sunxi: DT: A64: update device tree filesSamuel Holland
Import updated device trees from Linux tag v5.9. This picks up new hardware (PinePhone, PineTab); and it drops the U-Boot specific DTSI files for the Pinebook and the Teres-I, since the ANX6345 bridge is now supported upstream. A couple of headers needed updates for recently-added hardware support. Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Samuel Holland <[email protected]> Reviewed-by: Jagan Teki <[email protected]>
2020-10-22reset: ast2500: Use SCU for reset controlChia-Wei, Wang
The System Control Unit (SCU) controller of Aspeed SoCs provides the reset control for each peripheral. This patch refactors the reset method to leverage the SCU reset control. Thus the driver dependency on watchdog including dedicated WDT API and reset flag encoding can be eliminated. The Kconfig description is also updated accordingly. Signed-off-by: Chia-Wei, Wang <[email protected]> Reviewed-by: Ryan Chen <[email protected]>
2020-10-06Merge tag 'u-boot-amlogic-20201005' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - generate unique mac address from SoC serial on S400 board - Add USB support for GXL and AXG SoCs - Update Gadget code to use the new GXL and AXG USB glue driver - Add a VIM3 board support to add dynamic PCIe enable in OS DT - Fix AXG pinmux with requesting GPIOs - Add missing GPIOA_18 for AXG pinctrl - Add Amlogic PWM driver
2020-10-05ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1Neil Armstrong
This imports the AXG, GXL & GXM SoC and boards DT changes from the Linux commit b3a9e3b9622a ("Linux 5.8-rc1"). This change also removes GXL & GXM u-boot.dtsi hacks for USB gadget. Signed-off-by: Neil Armstrong <[email protected]>
2020-09-18reset: Add IPQ40xx reset controller driverRobert Marko
On Qualcomm IPQ40xx SoC series, GCC clock IP also handles the resets. So since this will be needed by further drivers, lets add a driver for the reset controller. Signed-off-by: Robert Marko <[email protected]> Cc: Luka Perkov <[email protected]>
2020-08-19arm: dts: mt7622: add SATA reset constantsFrank Wunderlich
add reset constants used for SATA to header file Signed-off-by: Frank Wunderlich <[email protected]>
2020-08-04dt-bindings: prci: add indexes for reset signals available in prciSagar Shrikant Kadam
Add bit indexes for reset signals within the PRCI module on FU540-C000 SoC. The DDR and ethernet sub-system's have reset signals indicated by these reset indexes. Signed-off-by: Sagar Shrikant Kadam <[email protected]> Reviewed-by: Pragnesh Patel <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2020-07-10reset: Add Raspberry Pi 4 firmware reset controllerNicolas Saenz Julienne
Raspberry Pi 4's co-processor controls some of the board's HW initialization process, but it's up to Linux to trigger it when relevant. Introduce a reset controller capable of interfacing with RPi4's co-processor that models these firmware initialization routines as reset lines. Signed-off-by: Nicolas Saenz Julienne <[email protected]> Signed-off-by: Matthias Brugger <[email protected]>
2020-07-01riscv: Add device tree for K210 and Sipeed Maix BitMSean Anderson
Where possible, I have tried to find compatible drivers based on the layout of registers. However, many devices remain untested. All untested devices have been left disabled, but some tentative properties (such as compatible strings, and clocks, interrupts, and resets properties) have been added. Signed-off-by: Sean Anderson <[email protected]>
2020-04-24arm: actions: add S700 SoC device treeAmit Singh Tomar
This patch adds .dtsi file(sync with Linux 5.5-rc6 with hash "b3a987b0264d") and required binding for S700 SoC that is a 64-bit Quad-core ARM Cortex-A53 cores. It also provisions dts file to be built based on selected platform(CONFIG_MACH_S900/S700). Reviewed-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Signed-off-by: Amit Singh Tomar <[email protected]>
2020-04-24arm: dts: sync dts for Action Semi S900Amit Singh Tomar
Synchronize device tree bindings with v5.5-rc6 tag with commit id "b3a987b0264d". Also, it removes older clock binding defined for S900 along with undocumented compatible string "actions,s900-serial" from serial driver and adapts clock driver to cater to new bindings. Reviewed-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Signed-off-by: Amit Singh Tomar <[email protected]>
2020-04-06arm64: dts: meson: sync dt and bindings from v5.6-rc2Jerome Brunet
Sync the device tree and dt-bindings from Linux v5.6-rc2 11a48a5a18c6 ("Linux 5.6-rc2") The only exception to this is the mmc pinctrl pin bias of gxl SoC family. This is a fix which found its way to u-boot but not Linux yet. Acked-by: Neil Armstrong <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Neil Armstrong <[email protected]>
2020-01-24sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108Chen-Yu Tsai
Sync the device tree files and device tree header files from upstream Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo 98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next which is also part of next-20200108. Changes brought in include: - cleanup of pinmux node names - addition of Security ID, MBUS, CSI, crypto engine, video codec, pmu, and thermal sensor device nodes for both SoCs - addition of deinterlacing engine device node on H3 - cleanup of RTC device node and addition of its clocks - various board cleanups and improvements - removal of pinmux node for GPIO lines - cpufreq / DVFS - HDMI output - UART-based Bluetooth - audio codec - USB ports - new boards Most of the changes don't concern U-boot. Signed-off-by: Chen-Yu Tsai <[email protected]> Reviewed-by: Jagan Teki <[email protected]>
2019-11-01ARC: HSDK: introduce reset driverEugeniy Paltsev
Introduce reset driver for Synopsys ARC HSDK SoC Signed-off-by: Eugeniy Paltsev <[email protected]> Signed-off-by: Alexey Brodkin <[email protected]>
2019-10-25Merge tag 'mips-pull-2019-10-25' of git://git.denx.de/u-boot-mipsTom Rini
- bmips: add BCRM NAND support for BCM6368, BCM6328, BCM6362 and BCM63268 SoCs - bmips: various small fixes - mtmips: add new drivers for clock, reset-controller and pinctrl - mtmips: add support for high speed UART - mtmips: update/enhance drivers for SPI and ethernet - mtmips: add support for MMC
2019-10-25reset: add reset controller driver for MediaTek MIPS platformWeijie Gao
This patch adds reset controller driver for MediaTek MIPS platform and header file for mt7628. Signed-off-by: Weijie Gao <[email protected]>
2019-10-25bmips: correct name charactersÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
2019-10-24dt-bindings: arm64: zynqmp: Add power and reset headersMichal Simek
Add power and reset headers to be sources by ZynqMP dtses. Signed-off-by: Michal Simek <[email protected]>
2019-10-18arm: dts: Import and update DT for Khadas VIM3Andreas Färber
In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts. Copied from da0c9ea146cb ("Linux 5.4-rc2") Signed-off-by: Andreas Färber <[email protected]> Signed-off-by: Neil Armstrong <[email protected]>
2019-10-11arm: dts: split mtk-reset.h into per-chip headerRyder Lee
This follows the linux header rules to avoid conflict bitfields. Tested-by: Frank Wunderlich <[email protected]> Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Frank Wunderlich <[email protected]>
2019-10-08imx: add support for i.MX7/i.MX8MQ reset controllerPatrick Wildt
Add support for the reset controller that's used on the i.MX7D and i.MX8MQ. This will be needed to be able to assert the PCIe reset pins. Bindings taken from Linux, driver implementation mostly taken from Linux and adjusted to U-Boot infrastructure. Signed-off-by: Patrick Wildt <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2019-08-07ARM: dts: add hifsys reset for MediaTek SoCsRyder Lee
This adds missing hifsys reset parts in header files. Tested-by: Frank Wunderlich <[email protected]> Signed-off-by: Ryder Lee <[email protected]>
2019-05-31ARM: dts: sync Amlogic G12A DT with Linux 5.2-rc1Neil Armstrong
Sync from Linux commit a188339ca5a3 ("Linux 5.2-rc1") Signed-off-by: Neil Armstrong <[email protected]>
2019-04-23ARM: dts: Import Amlogic G12A u200 DT from Linux 5.1-rc1Neil Armstrong
Import Linux 5.1-rc1 DT from 9e98c678c2d6 ("Linux 5.1-rc1") for the meson-g12a-u200 board, the meson-g12a.dtsi and the corresponding bindings. Signed-off-by: Neil Armstrong <[email protected]>
2019-01-18ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3Jagan Teki
Update all A80 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commits. arch/arm/boot/dts/sun9i-a80*: commit 190e3138f9577885691540dca59c2f07540bde04 Merge: cafc87023b0d a7affb13b271 Author: Arnd Bergmann <[email protected]> Date: Tue Mar 27 14:58:00 2018 +0200 Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt include/dt-bindings/*/sun9i-a80-*: commit 783ab76ae553abc23f80ef7511052d055697531b Author: Chen-Yu Tsai <[email protected]> Date: Sat Jan 28 20:22:36 2017 +0800 clk: sunxi-ng: Add A80 Display Engine CCU Note: sun9i-a80-cx-a99.dts is updated only uart0, since the same dts is not available in Linux. Signed-off-by: Jagan Teki <[email protected]>
2019-01-14reset: MedaiTek: add reset controller driver for MediaTek SoCsWeijie Gao
This patch adds reset controller driver for MediaTek SoCs. Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Weijie Gao <[email protected]>
2018-11-26ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1Neil Armstrong
Synchronize the Amlogic AXG Device Tree files and bindings include from the recent Linux 4.20-rc1, because it includes patches fixing support for U-boot. Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Neil Armstrong <[email protected]>
2018-09-28ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A31/A31s devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit b240b419db5d624ce7a5a397d6f62a1a686009ec Merge: 9c2dd8405c0c 518d2f43c358 Author: Linus Torvalds <[email protected]> Date: Thu Apr 5 21:18:09 2018 -0700 Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Signed-off-by: Jagan Teki <[email protected]>
2018-09-28ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A10s/A13/gr8/r8devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 190e3138f9577885691540dca59c2f07540bde04 Merge: cafc87023b0d a7affb13b271 Author: Arnd Bergmann <[email protected]> Date: Tue Mar 27 14:58:00 2018 +0200 Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Signed-off-by: Jagan Teki <[email protected]>
2018-09-28ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 590b0c0cfc6162aeebbf43eaafb9753b56df1532 Author: Pascal Roeleven <[email protected]> Date: Fri Apr 20 12:21:12 2018 +0200 ARM: dts: sun4i: Fix incorrect clocks for displays Note: Update pinctrl-0 for sun4i-a10-inet-3f.dts, sun4i-a10-inet-3w.dts like other dts file since there dts file are U-Boot specific. Signed-off-by: Jagan Teki <[email protected]>
2018-08-13ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A83T devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 221cb9fd2ee3042689fe0e6613d0f34eb46a5af6 Author: Mylène Josserand <[email protected]> Date: Fri May 4 21:05:44 2018 +0200 ARM: dts: sun8i: Add enable-method for SMP support for the A83T SoC Note: bananapi-m3 and cubietruck-plus board dts files has usb_otg enabled in U-Boot which were not present in Linux. Signed-off-by: Jagan Teki <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-13 22:08:19 +0000