| Age | Commit message (Collapse) | Author |
|---|
|
When this binding header was initally upstreamed, the PLL clocking the
microprocessor subsystem (MSS) and the RTC reference clocks were
omitted. Add them now, matching the IDs used in Linux.
Signed-off-by: Conor Dooley <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
Reviewed-by: Padmarao Begari <[email protected]>
|
|
Synchronise device tree with linux v6.1-rc3.
Signed-off-by: Marcel Ziswiler <[email protected]>
Tested-By: Tim Harvey <[email protected]> #imx8m{m,n,p}-venice-*
|
|
Synchronise device tree with linux v6.1-rc3.
Signed-off-by: Marcel Ziswiler <[email protected]>
Tested-By: Tim Harvey <[email protected]> #imx8m{m,n,p}-venice-*
|
|
Synchronise device tree with linux v6.1-rc3.
Signed-off-by: Marcel Ziswiler <[email protected]>
Tested-By: Tim Harvey <[email protected]> #imx8m{m,n,p}-venice-*
|
|
Synchronise device tree with linux v6.1-rc3.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Synchronise device tree with linux v6.1-rc3.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Synchronise device tree with linux v6.1-rc3.
Note: Nowadays, the intent is for them regular device trees to just be
synchronised from them Linux kernel device trees and any and all U-Boot
specific changes need to go into the -u-boot.dtsi device tree include
files which BTW get included automatically by the U-Boot build system.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
u-boot-imx-20221024
-------------------
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13916
- for 2022.01
- rework Kontron boards (mx6 and mx8)
- fixes for Toradex
- fixes (SPI, CAAM, )
- sync DT with Linux
- fixes for Gateworks GW7903 and GW7904 PMIC
- Engicam i.Core MX8M Plus EDIMM2.2
|
|
Synchronise device tree with linux v6.0-rc1.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Synchronise device tree with linux v6.0-rc1.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Synchronise device tree with linux v6.0-rc1.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
- dts update and sync for rk356x, rk3288, rk3399 from Linux;
- Add rk3399 EAIDK-610 board support;
- Update for puma-rk3399 board;
- some fix and typo fix in different drivers;
|
|
prepare for rk3566 based board
Signed-off-by: FUKAUMI Naoki <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Update the devicetree files from the Linux kernel, version v6.0-rc4.
This is covering the 64-bit SoCs, from arch/arm64/boot/dts/allwinner.
This avoids the not backwards-compatible r_intc binding change, to allow
older kernels to boot, but the other nodes are updated.
Not much change here, the vast majority is actually cosmetic: node names
and using symbolic names for the the RTC clocks.
Some A64 boards gain some audio nodes.
The H616 DTs are now switched to the version finally merged into the
kernel, which brings some changes, but none affecting U-Boot.
Signed-off-by: Andre Przywara <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
|
|
Add basic support for the Nuvoton NPCM845 EVB (Arbel).
Signed-off-by: Jim Liu <[email protected]>
|
|
This patch adds clock driver support for MediaTek MT7981 SoC
Reviewed-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
This patch adds clock driver support for MediaTek MT7986 SoC
Reviewed-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Tested-by: Daniel Golle <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
This patch adds a pinctrl header for common pinconf parameters such as
pull-up/pull-down resistors and drive strengths.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
The i.MXRT11 series has different offsets for IOCR_MUX, it also can
address 64MiB of SDRAM so add a macro for that.
Signed-off-by: Jesse Taube <[email protected]>
|
|
Add the clock binding doc for i.MXRT1170.
Signed-off-by: Jesse Taube <[email protected]>
|
|
This allows to test if a pin's label if displayed using gpio_get_status()
when this pin is configured in alternate function.
Signed-off-by: Patrice Chotard <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
|
|
This commit sychronizes the header file for FU740 PRCI clocks with the
one from Linux 5.19.
The constant values are the same, but all constant names are changed
(most are just prefixed with FU740_).
Signed-off-by: Icenowy Zheng <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Makes it easier to add readable GPIO definitions in DTS files
for Aspeed SOC based boards.
Ported with small edits to add IBM copyright statement and fix
for checkpatch warning.
Signed-off-by: Dhananjay Phadke <[email protected]>
Reviewed-by: Billy Tsai <[email protected]>
Acked-by: Chia-Wei Wang <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
u-boot-imx-20220726
-------------------
i.MX for 2022.10
- Added i.MX93 architecture
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/12891
|
|
Add the DTSi file and DT header files for i.MX93 SoC
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
The same file is already the part of Linux kernel that's why add it also to
u-boot to be able to use it in source code and DT files.
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/1c3bc464536a9bf64a2e8bfe18a938c9cb490620.1657192249.git.michal.simek@amd.com
|
|
Currently this clock driver initializes clocks for UART and eMMC. Along
with this import "qcom,gcc-qcs404.h" header from Linux mainline to
support DT bindings.
Signed-off-by: Sumit Garg <[email protected]>
|
|
Rather than using magic numbers as clock ids for peripherals import
qcom,gcc-sdm845.h from Linux to be used standard macros for clock ids.
So start using corresponding clk-id macro for debug UART.
Signed-off-by: Sumit Garg <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
|
|
Synchronise device tree with linux v5.19-rc5.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Synchronise device tree with linux v5.19-rc5.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Synchronise device tree with linux v5.19-rc5.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Synchronise device tree with linux v5.19-rc5.
Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device tree we are now using the
regular one for the Colibri Evaluation (carrier) board V3 (e.g.
vf610-colibri-eval-v3.dtb rather than the previous vf610-colibri.dtb).
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Synchronise device tree with linux-next next-20220708.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Synchronise device trees with linux-next next-20220708.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Sync imx8mm.dtsi device tree with linux-next 20220711.
The main motivation for doing this sync is the sha256 regression
reported by Andrey Zhizhikin [1].
The linux-next kernel has the following commit, which disables
the job ring 0 and fixes the problem:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20220715&id=dc9c1ceb555ff661e6fc1081434600771f29657c
[1] https://lore.kernel.org/u-boot/AM6PR06MB46912207D9460CD9924F35DAA68B9@AM6PR06MB4691.eurprd06.prod.outlook.com/T/#t
Signed-off-by: Fabio Estevam <[email protected]>
|
|
This patch adds reset controller bits definition header file for MediaTek
MT7621 SoC
Signed-off-by: Weijie Gao <[email protected]>
|
|
This patch adds a clock driver for MediaTek MT7621 SoC.
This driver provides clock gate control as well as getting clock frequency
for CPU/SYS/XTAL and some peripherals.
Reviewed-by: Sean Anderson <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
Device tree alignment with Linux kernel v5.19-rc1
- ARM: dts: stm32: Add alternate pinmux for ethernet0 pins
- ARM: dts: stm32: Add alternate pinmux for mco2 pins
- ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
- ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
- dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
- dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
- dt-bindings: clock: stm32mp15: rename CK_SCMI define
- dt-bindings: reset: stm32mp15: rename RST_SCMI define
- dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains
on stm32mp15
- dt-bindings: clk: cleanup comments
- ARM: dts: align SPI NOR node name with dtschema
- ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
- ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
- ARM: dts: stm32: move SCMI related nodes in a dedicated file for
stm32mp15
+ patch from stm32-dt-for-v5.19-fixes-2
- ARM: dts: stm32: move SCMI related nodes in a dedicated file for
stm32mp15
- ARM: dts: stm32: fix pwr regulators references to use scmi
- ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
- ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board
- ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI
- ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Include microchip,pdmc.h from Linux.
This file includes required defines for DT successful build.
Signed-off-by: Eugen Hristev <[email protected]>
|
|
Add pinctrl macros for AM62x SoCs. These macro definitions are similar
to that of previous platforms, but adding new definitions to avoid any
naming confusions in the SoC dts files.
checkpatch insists the following error exists:
ERROR: Macros with complex values should be enclosed in parentheses
However, we do not need parentheses enclosing the values for this
macro as we do intend it to generate two separate values as has been
done for other similar platforms.
Signed-off-by: Suman Anna <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
Some devicetree updates make use of newly-exposed clocks and resets.
To support that, copy the binding headers from the Linux v5.18-rc1 tag.
Signed-off-by: Samuel Holland <[email protected]>
|
|
Add clock controller driver for NPCM750
Signed-off-by: Jim Liu <[email protected]>
Signed-off-by: Stanley Chu <[email protected]>
Reviewed-by: Sean Anderson <[email protected]>
|
|
Add basic support for the Nuvoton NPCM750 EVB (Poleg).
Signed-off-by: Jim Liu <[email protected]>
|
|
This allows usage of LED_COLOR_ID_RGB macro in DTS files.
Signed-off-by: Pali Rohár <[email protected]>
|
|
Add i.MX8MP power domain handling into the driver. This is based on the
Linux GPCv2 driver state which is soon to be in Linux next.
Tested-By: Tim Harvey <[email protected]> #imx8mp-venice-gw74xx
Signed-off-by: Marek Vasut <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>
|
|
In order to update the DT for rk3288
sync the clock dt-binding header.
This is the state as of v5.17 in Linux.
Keep SCLK_MAC_PLL in use for rk3288 clock driver.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
In order to update the DT for rk3288
sync the power domain dt-binding header.
This is the state as of v5.17 in Linux.
Change location to be more in line with other SoCs.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
In order to update the DT for rk3228
sync the clock dt-binding header.
This is the state as of v5.17 in Linux.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
In order to update the DT for rk3228
sync the power domain dt-binding header.
This is the state as of v5.17 in Linux.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
