| Age | Commit message (Collapse) | Author |
|---|
|
Add dt-binding for reset driver.
Signed-off-by: Huan Zhou <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
This adds the necessary dt-bindings and documentation to use the ADI
SC5xx pinctrl driver in a device tree. It is not yet available upstream
in the Linux kernel. Eventually, it will be moved there.
Signed-off-by: Vasileios Bimpikas <[email protected]>
Signed-off-by: Utsav Agarwal <[email protected]>
Signed-off-by: Arturs Artamonovs <[email protected]>
Signed-off-by: Greg Malysa <[email protected]>
|
|
clock/rk3288-cru.h in include/dt-bindings is almost identical to the
version in dts/upstream, remove the copy from include/dt-bindings to
only use the version from dts/upstream.
One clk, SCLK_MAC_PLL, is not part of the upstream bindings, this clk is
not used by upstream, in-tree or vendor DTs and can safely be dropped.
No functional change to board DTs is intended with this removal.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The device tree for rk3036 combined is now
available in the /dts/upstream directory.
Use imply OF_UPSTREAM to migrate all rk3036 boards.
Reviewed-by: Kever Yang <[email protected]>
Signed-off-by: Johan Jonker <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-stm
STM32 MPU:
- Remove dt-bindings headers available in dts/upstream
- Fixes for stm32prog
- Enable CONFIG_SYS_64BIT_LBA for STM32MP15/13/25 defconfigs
- Add upport of ck_usbo_48m in pre-reloc stage for STM32MP13
- Clean env_get_location() for STM32MP1
- Fix board_get_usable_ram_top() to fix infinite loop in cache
management for STM32MP2.
- Fix ck_flexgen_08 frequency for STM32MP2
STM32 MCU:
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F469-Disco
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F769-Disco
|
|
Some dt-binding headers mask the upstream ones which can lead to build
failures, or worse: super weird bugs, if they get out of sync.
Remove these headers so our devicetree and binding headers will both be
in sync with upstream.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
This patch adds clock driver support for MediaTek MT7987 SoC
Signed-off-by: Sam Shih <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
Weijie Gao <[email protected]> says:
This patch series migrates MediaTek MT7629 to OF_UPSTREAM
Changes in v2:
* Remove mt7629-rfb.dtb from arch/arm/dts/Makefile
* Add wdt-reboot node to make reset command work
Link: https://lore.kernel.org/r/[email protected]
|
|
Move differences in DT files between upstream Linux DT and U-Boot DT to
mt7629-rfb-u-boot.dtsi.
Remove old copies of mt7629-related clock bindings, .dts, and .dtsi files.
Update defconfig to switch the whole mt7629 SoC to use OF_UPSTREAM.
Signed-off-by: Sam Shih <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
The clock and power DT includes for rk3066a and rk3188 are now
available in the dts/upstream directory, so remove the ones that
are now redundant.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
power/rk3288-power.h in include/dt-bindings is identical to the version
in dts/upstream, remove the copy from include/dt-bindings to only use
the version from dts/upstream.
No functional change to board DTs is intended with this removal.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Enable OF_UPSTREAM to use upstream DT and add starfive/ prefix to
the DEFAULT_DEVICE_TREE. Rename jh7110-starfive-visionfive-2-u-boot.dtsi
to jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi and set the v1.3b
device tree as the default device tree.
Drop redundant DT files from arch/riscv/dts/ and redundant clock and
reset definitions from include/dt-bindings/.
Since the old clock definitions is a little different from those in
upstream Linux, update the clock definitions in clock drivers
accordingly.
Tested-by: Anand Moon <[email protected]>
Tested-by: E Shattow <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Hal Feng <[email protected]>
|
|
Prepare v2025.01-rc3
|
|
Some dt-binding headers mask the upstream ones which can lead to build
failures, or worse: super weird bugs, if they get out of sync.
Remove these headers so our devicetree and binding headers will both be
in sync with upstream.
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
The upstream version has new defines use to build DT, drop
it in favor of the dts/upstream more recent one.
Signed-off-by: Neil Armstrong <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
- khadas-vim3{l}: fix userdata size for android config
- drop A1 dtsi and other bindings includes in favor of Upstream ones
|
|
We have exactly the same in upstream bindings.
Signed-off-by: Alexey Romanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
We have exactly the same in upstream bindings.
Signed-off-by: Alexey Romanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
We have exactly the same in upstream bindings.
Signed-off-by: Alexey Romanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
We are now using the dts/upstream subtree for the RZ/G2L SoC family so
we can drop unused dt-bindings headers.
Signed-off-by: Paul Barker <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
Renesas R-Car systems use mainline Linux DTs for U-Boot via OF_UPSTREAM,
which also includes headers from dts/upstream/include/dt-bindings/power .
Remove unused legacy DT header files from include/dt-bindings/power .
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
Renesas R-Car systems use mainline Linux DTs for U-Boot via OF_UPSTREAM,
which also includes headers from dts/upstream/include/dt-bindings/clock .
Remove unused legacy DT header files from include/dt-bindings/clock .
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
|
|
With the recent "old-style sunxi" sync and the penultimate OF_UPSTREAM DT
update, both directories were based on the same v6.10 kernel tree.
And while there is one subtle difference in many Allwinner SoC's DT
files, the H616 ones turn out to be identical.
Remove the old copies of the H616 related .dts and .dtsi files, and
switch the whole H616 SoC over to use OF_UPSTREAM. This immediately
benefits from the recent upstream DT update, to kernel v6.11.
Signed-off-by: Andre Przywara <[email protected]>
|
|
Import header file of sophgo cv1800b clock controller from kernel
Signed-off-by: Kongyang Liu <[email protected]>
Link: https://lore.kernel.org/all/IA1PR20MB4953637E7A6C121D7A700F1CBB8BA@IA1PR20MB4953.namprd20.prod.outlook.com/
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
The sandbox pinmux driver is used in the non-test devicetree as well as
the test one. I didn't realize this when I modified the driver for
tests, and so broke the regular use case (which only resulted in
warnings). First, making the pinmux and the UART group available
pre-relocation to avoid ENODEV errors. Then, convert the pin groups and
functions to the new style, adding onewire group as well.
Fixes: 7f0f1806e3a ("test: pinmux: Add test for pin muxing")
Closes: https://source.denx.de/u-boot/u-boot/-/issues/2
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Prepare v2024.10-rc3
|
|
Christian Marangi <[email protected]> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
|
|
Add missing A1/2SYS clock ID just as a reference for OF_UPSTREAM
support. These clocks are not defined and are not usable as current
clock topckgen OPs doesn't support gates.
These special node won't ever be used by uboot hence just add them for
reference.
Signed-off-by: Christian Marangi <[email protected]>
Tested-by: Frank Wunderlich <[email protected]>
|
|
Add missing PERIBUS_SEL clock to match upstream linux clk ID order. Also
convert pericfg to mux + gate implementation as now we have also mux on
top of gates.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Add missing clock PERI_UART4_PD for peri clock gates. This is needed to
match upstream linux clk ID in preparation for OF_UPSTREAM.
Also convert infracfg to mux + gate implementation as now we have mux on
top of gates.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Add missing infra clock MUX1_SEL needed for CPU clock. This is needed to
match the upstream clk ID order in preparation for OF_UPSTREAM.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Add missing clock for MAIN_CORE_EN. This is a special clock as it's a
gate for the APMIXED clocks required as a parent for CPU clocks.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Move INFRA_TRNG clock to the bottom of the clk ID to match upstream
linux order. This is in preparation of OF_UPSTREAM.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Rename AUDIO_AWB3 to AUDIO_AWB2 to match upstream linux naming in
preparation for OF_UPSTREAM support.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Christian Marangi <[email protected]> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
|
|
Rename each entry from CK to CLK to match the include in upstream kernel
linux.
Signed-off-by: Christian Marangi <[email protected]>
Tested-by: Frank Wunderlich <[email protected]>
|
|
Replace infracfg clk ID with upstream linux version.
The same format is used here with the factor first, then mux and then
gates.
To correctly reference the gates in clk_gate function, define the
gates_offs value in clk_tree now that they are at an offset from mux and
factor.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Move INFRA_TRNG_CK to the bottom of the list to have a 1:1 match with
upstream linux clock ID.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Comment out CK_TOP_A_TUNER as not used and not defined in upstream
kernel linux. This is to permit support of OF_UPSTREAM and have a 1:1
match with upstream linux clock ID.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Now that we can have advanced parent handling for mux, we can drop
spurious topckgen 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7986.
Drop the factor entry from mt7986-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the apmixed clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for apmixed.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Reorder TOPCKGEN factor ID to put TOP_FACTOR first and then PLL. This is
to match how it's done in upstream kernel linux and in preparation for
OF_UPSTREAM support.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Rename TOPCKGEN factor clock to upstream neaming.
Upstream kernel linux reference the factor clock for apmixedpll with the
"pll" suffix. Align the naming to the upstream naming format in
preparation for OF_UPSTREAM support.
Also rename rtc clock to drop the CB_ as upstream doesn't have that.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Fix a typo for infra_i2c0_ck where 0 was misspelled as O.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Add missing entry for IPCIE_PIPE_CK infra gate clock. Renumber the clock
order to match the expected offset in the gate array.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7986.
Drop the factor entry from mt7986-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for infracfg and topckgen.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Upstream kernel linux clock include use SYSAXI_D2 instead of 66M_MCK.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Upstream kernel linux clock include use TOP_XTAL instead of CB_CKSQ_40M.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Christian Marangi <[email protected]> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
|
|
Rename each entry from CK to CLK to match the include in upstream kernel
linux.
Signed-off-by: Christian Marangi <[email protected]>
Tested-by: Frank Wunderlich <[email protected]>
|
|
Replace infracfg clk ID with upstream linux version.
The same format is used here with the factor first, then mux and then
gates.
To correctly reference the gates in clk_gate function, define the
gates_offs value in clk_tree now that they are at an offset from mux and
factor.
Drop any comment that reference the clock ID as we now have a 1:1 match
with upstream kernel linux.
Signed-off-by: Christian Marangi <[email protected]>
|
