| Age | Commit message (Collapse) | Author |
|---|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Add support for the SC5xx machine type from Analog Devices. This
includes support for the SC57x, SC58x, SC59x, and SC59x-64 SoCs, which
have many common features such as common ADI IP blocks, and SHARC DSP
cores. This commit introduces core functionality required for all boards
using an SC5xx SoC, such as:
- SPL configuration
- Required CPU hooks such as reset
- Boot ROM interaction to load the stage 2 bootloader in the reference
configuration. Other options are possible but not officially supported
at this time
- SoC-common configuration expected to be reused by all boards
- Early initialization for system clocks and DDR controller
Co-developed-by: Greg Malysa <[email protected]>
Signed-off-by: Greg Malysa <[email protected]>
Co-developed-by: Ian Roberts <[email protected]>
Signed-off-by: Ian Roberts <[email protected]>
Signed-off-by: Vasileios Bimpikas <[email protected]>
Signed-off-by: Utsav Agarwal <[email protected]>
Signed-off-by: Arturs Artamonovs <[email protected]>
Signed-off-by: Nathan Barrett-Morrison <[email protected]>
|
|
Add logic for booting systems with the RAUC update mechanism. This can
be reused by other phytec boards.
Signed-off-by: Leonard Anderweit <[email protected]>
Tested-by: Teresa Remmet <[email protected]>
|
|
We shouldn't need finfdt anymore. Drop the env script.
Reviewed-by: Jonathan Humphreys <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
|
|
By default this variable is unset and this causes the test condition to
fail on devices that don't have this defined. Set a default value for
this.
=> boot
## Error: "main_cpsw0_qsgmii_phyinit" not defined
[...]
Fixes: 0d72b0f2f83b ("include: env: ti: ti_common: Run main_cpsw0_qsgmii_phyinit conditionally")
Signed-off-by: Manorit Chawdhry <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Fix a missing semicolon that leads to syntax error while booting j721s2.
Importing environment from mmc1 ...
syntax error at 'run'HUSH died!
Fixes: 0d72b0f2f83b ("include: env: ti: ti_common: Run main_cpsw0_qsgmii_phyinit conditionally")
Signed-off-by: Manorit Chawdhry <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
The main_cpsw0_qsgmii_phyinit command is defined only for certain TI
SoCs which have the do_main_cpsw0_qsgmii_phyinit variable set.
Add a check to ensure that the main_cpsw0_qsgmii_phyinit command is run
only for such SoCs.
Signed-off-by: Manorit Chawdhry <[email protected]>
Signed-off-by: Siddharth Vadapalli <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Replace instances of http://www.ti.com with https://www.ti.com
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
After the refactor with conf- nodes in fitImage, overlaystring wasn't
didn't handle the new conf- nodes in FIT Booting. Fix get_overlaystring
to handle conf- nodes.
Fixes: 837833a724b7 ("environment: ti: Add get_fit_config command to get FIT config string")
Reported-by: Aniket Limaye <[email protected]>
Signed-off-by: Manorit Chawdhry <[email protected]>
Reviewed-by: Andrew Davis <[email protected]>
|
|
ti_mmc bootmethod uses a findfdt routine that is expected to be
implemented by all platforms.
Define a default findfdt based on configured DEFAULT_DEVICE_TREE option
for u-boot. This saves duplication across multiple boards and handles
architecture folder location changes centrally.
TI ARMV7 platforms will need to override default_device_tree_subarch
in the env file to point to the appropriate platform. Note: default
"omap" is used to cater to "most common" default.
Tested-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
ti_armv7_common does not make any more sense as it is used by armv7
and armv8 TI based platforms.
Reported-by: Tom Rini <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
|
|
'script' bootmethod that should be used with CONFIG_BOOTSTD.
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
proceeding
If mmc dev reports that the device is not present, there is no point in
proceeding further to attempt to load the files.
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Create a text-file version of x86-common.h which can be used by x86
boards.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]> # Intel Edison
Reviewed-by: Bin Meng <[email protected]>
|
|
The 'environment' word is too long. We mostly use 'env' in U-Boot, so use
that as the name of the include directory too.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]> # Intel Edison
Reviewed-by: Bin Meng <[email protected]>
|
