| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Within /chosen we may have a node which points to another node, similar
to how /aliases works. Add a helper function to do this lookup.
Signed-off-by: Simon Glass <[email protected]>
|
|
The initialization table comes from the "Illustration of I2C command
for initialing PS8625" document supplied by Parade.
Signed-off-by: Vadim Bendebury <[email protected]>
Signed-off-by: Ajay Kumar <[email protected]>
Acked-by: Simon Glass <[email protected]>
Tested-by: Simon Glass <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
On Exynos5420 and newer versions, the FIMD sysmmus are in
"on state" by default.
We have to disable them in order to make FIMD DMA work.
This patch adds the required framework to exynos_fimd driver,
and disables FIMD sysmmu on Exynos5420.
Signed-off-by: Ajay Kumar <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
This simple function returns the node offset of a named alias.
Signed-off-by: Simon Glass <[email protected]>
|
|
Aliases are used to provide U-Boot's numbering of devices, such as:
aliases {
spi0 = "/spi@12330000";
}
spi@12330000 {
...
}
This tells us that the SPI controller at 12330000 is considered to be the
first SPI controller (SPI 0). So we have a numbering for the SPI node.
Add a function that returns the numbering for a node assume that it exists
in the list of aliases.
Signed-off-by: Simon Glass <[email protected]>
|
|
The backlight uses FETs on the TPS65090. Enable this so that the display
is visible.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Lukasz Majewski <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
This adds driver support for the TPS65090 PMU. Support includes
hooking into the pmic infrastructure so that the pmic commands
can be used on the console. The TPS65090 supports the following
functionality:
- fet enable/disable/querying
- getting and setting of charge state
Even though it is connected to the pmic infrastructure it does
not hook into the pmic charging charging infrastructure.
The device tree binding is from Linux, but only a small subset of
functionality is supported.
Signed-off-by: Tom Wai-Hong Tam <[email protected]>
Signed-off-by: Hatim Ali <[email protected]>
Signed-off-by: Katie Roberts-Hoffman <[email protected]>
Signed-off-by: Rong Chang <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Signed-off-by: Vincent Palatin <[email protected]>
Signed-off-by: Aaron Durbin <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Exynos serise can be supported the dw-mmc controller.
So, it's good that used the general prefix as "_EXYNOS_DWMMC".
Signed-off-by: Jaehoon Chung <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Trivial merge conflict, needed to manually remove
local_info as per commit 41364f0f.
Conflicts:
board/samsung/common/board.c
|
|
Add a simple LCD driver which uses SDL to display the image. We update the
image regularly, while still providing for reasonable performance.
Adjust the common lcd code to support sandbox.
For command-line runs we do not want the LCD to be displayed, so add a
--show_lcd option to enable it.
Tested-by: Che-Liang Chiou <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a simple emulation of the Chrome OS EC for sandbox, so that it can
perform various EC tasks such as keyboard handling.
Reviewed-by: Vadim Bendebury <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
A flash map describes the layout of flash memory in terms of offsets and
sizes for each region. Add a function to read a flash map entry from the
device tree.
Reviewed-by: Che-Liang Chiou <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
This patch enables support for device tree for sdhci driver.
Non DT case is still supported.
Signed-off-by: Piotr Wilczek <[email protected]>
Signed-off-by: Kyungmin Park <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
This patch enables parsing mipi data from device tree.
Non device tree case is still supported.
Signed-off-by: Piotr Wilczek <[email protected]>
Signed-off-by: Kyungmin Park <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Tegra124's MMC controller is very similar to earlier SoC generations,
and can be supported by the same driver.
However, there are some non-backwards-compatible HW differences, and
hence a new DT compatible value must be used to describe the HW. This
patch updates the driver to support that new compatible value.
That said, the HW differences are only relevant when enabling certain
high-performance transfer modes. Since the driver is currently very
simple and doesn't enable those modes, we don't actually need to address
any of these HW differences in the code yet, hence the simple nature of
this patch.
Signed-off-by: Stephen Warren <[email protected]>
Acked-by: Pantelis Antoniou <[email protected]>
Tested-by: Thierry Reding <[email protected]>
Acked-by: Simon Glass <[email protected]>
Signed-off-by: Tom Warren <[email protected]>
|
|
Adding required compatible string for xHCI host controller
as well as USB 3.0 PHY to enable dt support for usb 3.0 on
exynos5.
Signed-off-by: Vivek Gautam <[email protected]>
Cc: Julius Werner <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Minkyu Kang <[email protected]>
Cc: Dan Murphy <[email protected]>
Cc: Marek Vasut <[email protected]>
|
|
The sandburst-specific i2c drivers have been deleted, conflict was just
over the SPDX conversion.
Conflicts:
board/sandburst/common/ppc440gx_i2c.c
board/sandburst/common/ppc440gx_i2c.h
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Wolfgang Denk <[email protected]>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <[email protected]>
|
|
Adds a new COMPAT string exynos5-hsi2c for high speed i2c controller
available on exynos5 SoCs from Samsung.
Signed-off-by: Naveen Krishna Chatradhi <[email protected]>
|
|
Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and
serial.
Conflicts:
arch/arm/dts/exynos5250.dtsi
Signed-off-by: Tom Rini <[email protected]>
|
|
Tegra30 and Tegra114 are compatible except PLL parameters.
Tested on Tegra30 Cardhu, and Tegra114 Dalmore
platforms. All works well.
Signed-off-by: Jim Lin <[email protected]>
Signed-off-by: Tom Warren <[email protected]>
|
|
This patch adds the driver for keyboard that's controlled by ChromeOS EC.
Signed-off-by: Randall Spangler <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Vincent Palatin <[email protected]>
Signed-off-by: Hung-ying Tyan <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
This patch adds the cros_ec driver that implements the protocol for
communicating with Google's ChromeOS embedded controller.
Signed-off-by: Bernie Thompson <[email protected]>
Signed-off-by: Bill Richardson <[email protected]>
Signed-off-by: Che-Liang Chiou <[email protected]>
Signed-off-by: Doug Anderson <[email protected]>
Signed-off-by: Gabe Black <[email protected]>
Signed-off-by: Hung-ying Tyan <[email protected]>
Signed-off-by: Louis Yung-Chieh Lo <[email protected]>
Signed-off-by: Randall Spangler <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Vincent Palatin <[email protected]>
Acked-by: Simon Glass <[email protected]>
Tested-by: Simon Glass <[email protected]>
|
|
Add required compatible information for s5p serial driver
Signed-off-by: Abhilash Kesavan <[email protected]>
Signed-off-by: Rajeshwari Shinde <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
|
|
Add required compatible information for DWMMC driver.
Signed-off-by: Vivek Gautam <[email protected]>
Signed-off-by: Amar <[email protected]>
Acked-by: Jaehoon Chung <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Add support for Infineon's new SLB 9645 TT 1.2 I2C TPMs,
which supports clockstretching, combined reads and a bus speed of
up to 400khz. The device also has a new device id.
This is based on the kernel patch provided by Infineon :
https://gerrit.chromium.org/gerrit/42332
Signed-off-by: Vincent Palatin <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Luigi Semenzato <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Vincent Palatin <[email protected]>
Tested-by: Tom Wai-Hong Tam <[email protected]>
Tested-by: Vincent Palatin <[email protected]>
|
|
|
|
Add a driver for the I2C TPM from Infineon.
Signed-off-by: Che-Liang Chiou <[email protected]>
Signed-off-by: Rong Chang <[email protected]>
Signed-off-by: Tom Wai-Hong Tam <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
|
|
Conflicts:
drivers/spi/tegra20_sflash.c
include/fdtdec.h
lib/fdtdec.c
|
|
Add required compatible information for FIMD.
Signed-off-by: Ajay Kumar <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Add required compatible information for FIMD.
Signed-off-by: Ajay Kumar <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
|
|
|
|
Add "nvidia,tegra114-spi" to represent t114 SPI controller hardware.
Signed-off-by: Allen Martin <[email protected]>
Signed-off-by: Tom Warren <[email protected]>
Reviewed-by: Stephen Warren <[email protected]>
|
|
Enable device tree control of SPI flash, and use this to implement
memory-mapped SPI flash, which is supported on Intel chips.
Signed-off-by: Simon Glass <[email protected]>
|
|
It is common to have a "reg = <address size>" property in the FDT.
Add a function to handle this, similar to the existing
fdtdec_get_addr();
Signed-off-by: Simon Glass <[email protected]>
|
|
Tegra30 SD/MMC controller differs enough from Tegra20 that it
needs its own entry in the compat_names/compat_id tables and in
the Tegra MMC driver.
Signed-off-by: Tom Warren <[email protected]>
Reviewed-by: Stephen Warren <[email protected]>
|
|
tegra_mmc_init() now parses the DT info for bus width, WP/CD GPIOs, etc.
Tested on Seaboard, fully functional.
Tamonten boards (medcom-wide, plutux, and tec) use a different/new
dtsi file w/common settings.
Signed-off-by: Tom Warren <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Reviewed-by: Stephen Warren <[email protected]>
|
|
T114 has a slightly different I2C clock, with a new (extra) divisor
in standard/fast mode and HS mode. Tested on my Dalmore, and the I2C
clock is 100KHz +/- 3Hz on my Saleae Logic analyzer.
Added a new entry in compat_names for T114 I2C since it differs
from the previous Tegra SoCs. A flag is set when T114 I2C HW is
found so new features like the extra clock divisor can be used.
Signed-off-by: Tom Warren <[email protected]>
Acked-by: Laxman Dewangan <[email protected]>
|
|
Fdt entry for Exynos TMU driver specific pre-defined values used for
calibration of current temperature and defining threshold values.
Signed-off-by: Akshay Saraswat <[email protected]>
Acked-by: Simon Glass <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Add required compatible information for MAX98095 codec
Signed-off-by: Rajeshwari Shinde <[email protected]>
Acked-by: Simon Glass <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Add driver for tegra SPI "SLINK" style driver. This controller is
similar to the tegra20 SPI "SFLASH" controller. The difference is
that the SLINK controller is a genernal purpose SPI controller and the
SFLASH controller is special purpose and can only talk to FLASH
devices. In addition there are potentially many instances of an SLINK
controller on tegra and only a single instance of SFLASH. Tegra20 is
currently ths only version of tegra that instantiates an SFLASH
controller.
This driver supports basic PIO mode of operation and is configurable
(CONFIG_OF_CONTROL) to be driven off devicetree bindings. Up to 4
devices per controller may be attached, although typically only a
single chip select line is exposed from tegra per controller so in
reality this is usually limited to 1.
To enable this driver, use CONFIG_TEGRA_SLINK
Signed-off-by: Allen Martin <[email protected]>
Signed-off-by: Tom Warren <[email protected]>
|
|
Add support for configuring tegra SPI driver from devicetree.
Support is keyed off CONFIG_OF_CONTROL. Add entry in seaboard dts
file for spi controller to describe seaboard spi.
Signed-off-by: Allen Martin <[email protected]>
Signed-off-by: Tom Warren <[email protected]>
|
|
Add required compatible information for PMIC
Signed-off-by: Rajeshwari Shinde <[email protected]>
Acked-by: Simon Glass <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Add required compatible information for USB
Signed-off-by: Vivek Gautam <[email protected]>
Acked-by: Simon Glass <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Add required compatible information for SPI driver.
Signed-off-by: Rajeshwari Shinde <[email protected]>
Acked-by: Simon Glass <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Add required compatible information for sound driver.
Signed-off-by: Rajeshwari Shinde <[email protected]>
Acked-by: Simon Glass <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
