| Age | Commit message (Collapse) | Author |
|---|
|
MTD block - abstraction over MTD subsystem, allowing
to read and write in blocks using BLK UCLASS.
Signed-off-by: Alexey Romanov <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or
names are converted.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Acked-by: Marek Behún <[email protected]>
|
|
Add support for XTX XT26G0xA and XT26xxxD. The driver is ported from
linux-6.7.1. This driver is tested on Banana BPI-R3 with XT26G01A and
XT26G12D.
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Bruce Suen <[email protected]>
Reviewed-by: Frieder Schrempf <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Introduced in upstream Linux with commit 7a08dbaedd365 for release v5.0.
When the new atmel nand driver was backported to U-Boot with commit
6a8dfd57220d ("nand: atmel: Add DM based NAND driver") that definition
was added to the driver instead of the header file. Move it over to the
other definitions with the same help text it has in Linux.
Code actually using this has not been ported over to raw nand base yet.
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Alexander Dahl <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Enabling Octal DTR mode in multi-die package parts requires reister setup
for each die. That can be done by simple for-loop. write_enable() takes
effect to all die at once so we can call it before the loop. Besides we
can replace spi_mem_exec_op() calls with spansion_read/write_any_reg().
And finally, we must mask CFR2V[7:4] when changing dummy cycles, as
CFR2V[7] indicates current addressing mode and that should be 1 (4-byte
address mode) for multi-die package parts.
Signed-off-by: Takahiro Kuwano <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
Infineon(Cypress) S28Hx-T family does not support legacy CLSR(0x30) opcode.
Instead, it supports CLPEF(0x82) which has the same functionality as CLSR.
spansion_sr_ready() is for multi-die package parts including S28HS02GT, so
we need to use CLPEF instead of CLSR.
This change does not affect to S25x02GT which uses spansion_sr_ready() as
S25Hx-T family also supports CLPEF(0x82) as well as CLSR(0x30).
Signed-off-by: Takahiro Kuwano <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
s25_erase_non_uniform() and s28hx_t_erase_uniform() support hybrid sector
layout (32 x 4KB sectors overlaid at bottom address) and doing same thing.
Consolidate them into single helper named s25_s28_erase_non_uniform().
Signed-off-by: Takahiro Kuwano <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
Some macro definitions used in Infineon(Cypress) S25 and S28 series are
redundant and some have inconsistent prefix. This patch removes
redundant ones and renames some to have same prefix as others.
Signed-off-by: Takahiro Kuwano <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
into next
- spi_nor_read_sfdp_dma_unsafe (Vaishnav)
- w25q01/02 (Jim)
|
|
Adaptation of Linux commit d74c36480a67
This patch adds support for ESMT F50L1G41LB and F50D1G41LB.
It seems that ESMT likes to use random JEDEC ID from other vendors.
Their 1G chips uses 0xc8 from GigaDevice and 2G/4G chips uses 0x2c from
Micron. For this reason, the ESMT entry is named esmt_c8 with explicit
JEDEC ID in variable name.
Datasheets:
https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F50L1G41LB(2M).pdf
https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F50D1G41LB(2M).pdf
Signed-off-by: Igor Prusov <[email protected]>
Signed-off-by: Chuanhong Guo <[email protected]>
Signed-off-by: Martin Kurbanov <[email protected]>
Signed-off-by: Dmitry Rokosov <[email protected]>
Tested-by: Martin Kurbanov <[email protected]>
Reviewed-by: Frieder Schrempf <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
To quote the author:
This series tests raw nand flash in sandbox and fixes various bugs discovered in
the process. I've tried to do things in a contemporary manner, avoiding the
(numerous) variations present on only a few boards. The test is pretty minimal.
Future work could test the rest of the nand API as well as the MTD API.
Bloat (for v1) at [1] (for boards with SPL_NAND_SUPPORT enabled). Almost
everything grows by a few bytes due to nand_page_size. A few boards grow more,
mostly those using nand_spl_loaders.c. CI at [2].
[1] https://gist.github.com/Forty-Bot/9694f3401893c9e706ccc374922de6c2
[2] https://source.denx.de/u-boot/custodians/u-boot-clk/-/pipelines/18443
|
|
This allows using these functions without ifdefs. OneNAND depends on MTD,
so this ifdef was redundant in the first place.
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Dario Binacchi <[email protected]>
|
|
At this point, we don't need to have <common.h> be included because of
properties in the header itself, it only includes other common header
files. We've also audited the code enough at this point that we can drop
<common.h> from being included in headers and rely on code to have the
correct inclusions themselves, or at least <common.h>.
Signed-off-by: Tom Rini <[email protected]>
|
|
This adds more supported spinand devices from the Linux kernel
implementation.
This does not include the latest kernel implementation as this would
require a substantial amount of extra work due to the missing
ECC engine abstraction layer in U-Boot.
Signed-off-by: Mikhail Kshevetskiy <[email protected]>
Signed-off-by: Frieder Schrempf <[email protected]> (commit message)
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Currently there are 3 different variants of read_id implementation:
1. opcode only. Found in GD5FxGQ4xF.
2. opcode + 1 addr byte. Found in GD5GxGQ4xA/E
3. opcode + 1 dummy byte. Found in other currently supported chips.
Original implementation was for variant 1 and let detect function
of chips with variant 2 and 3 to ignore the first byte. This isn't
robust:
1. For chips of variant 2, if SPI master doesn't keep MOSI low
during read, chip will get a random id offset, and the entire id
buffer will shift by that offset, causing detect failure.
2. For chips of variant 1, if it happens to get a devid that equals
to manufacture id of variant 2 or 3 chips, it'll get incorrectly
detected.
This patch reworks detect procedure to address problems above. New
logic do detection for all variants separatedly, in 1-2-3 order.
Since all current detect methods do exactly the same id matching
procedure, unify them into core.c and remove detect method from
manufacture_ops.
This is a rework of Chuanhong Guo <[email protected]> patch
submitted to linux kernel
Signed-off-by: Mikhail Kshevetskiy <[email protected]>
Signed-off-by: Frieder Schrempf <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Dario Binacchi <[email protected]>
|
|
As part of various code clean-ups we have on occasion missed removing
unused header files. None of these files are referenced anywhere else
at this point.
Signed-off-by: Tom Rini <[email protected]>
|
|
This is not used since this commit:
570c3dcfc15 arm: Remove spear600 boards and the rest of SPEAr support
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
|
|
This is not used since this commit:
8d1e3cb1400 powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-By: Michael Trimarchi <[email protected]>
|
|
Infineon S25FS256T is 256Mbit Quad SPI NOR flash. The key features and
differences comparing to other Spansion/Cypress flash familes are:
- 4-byte address mode by factory default
- Quad mode is enabled by factory default
- Supports mixture of 128KB and 64KB sectors by OTP configuration
(this patch supports uniform 128KB only)
Signed-off-by: Takahiro Kuwano <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
Cypress defines two flavors of configuration registers, volatile and
non volatile, and both use the same bit fields. Rename the bitfields in
the configuration registers so that they can be used for both flavors.
Suggested-by: Tudor Ambarus <[email protected]>
Signed-off-by: Takahiro Kuwano <[email protected]>
Reviewed-by: Tudor Ambarus <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
CFR5[6] is reserved bit and must be always 1. Set it to comply with flash
requirements. While fixing SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN definition,
stop using magic numbers and describe the missing bit fields in CFR5
register. This is useful for both readability and future possible addition
of Octal STR mode support.
Fixes: ea9a22f7e79c ("mtd: spi-nor-core: Add support for Cypress Semper flash")
Suggested-by: Tudor Ambarus <[email protected]>
Signed-off-by: Takahiro Kuwano <[email protected]>
Reviewed-by: Tudor Ambarus <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
Support u-boot driver model. We still retain
support legacy way of doing things if ELM_BASE
is defined in <asm/arch/hardware.h>
We could completely get rid of that if all
platforms defining ELM_BASE get rid of that definition
and enable CONFIG_SYS_NAND_SELF_INIT and are verified
to work.
Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Link: https://lore.kernel.org/all/CABGWkvrvKiVA_yaDnHJcHEKwc+pEuLdz=i6HQEY0oJQvohCUsw@mail.gmail.com
|
|
This function is only used within this module, so it is no longer
necessary to use EXPORT_SYMBOL_GPL().
This patch parallels the work done in the following patch:
https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-By: Michael Trimarchi <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
|
|
The GPMC is a unified memory controller dedicated for interfacing
with external memory devices like
- Asynchronous SRAM-like memories and ASICs
- Asynchronous, synchronous, and page mode burst NOR flash
- NAND flash
- Pseudo-SRAM devices
This driver will take care of setting up the GPMC based on
the settings specified in the Device tree and then
probe its children.
Signed-off-by: Roger Quadros <[email protected]>
|
|
The nor->addr_width tracks number of address bytes used in
read/program/erase ops and eventually set to 4 for >16MB chips, regardless
of flash's internal address mode. For Infineon SEMPER flash's, we use
Read/Write Any Register commands for configuration and status check.
These commands take 3- or 4-byte address depending on flash's internal
address mode.
Signed-off-by: Takahiro Kuwano <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
Since commit 8d38a8459b0d ("mtd: Rename free() to rfree()")
the function has been renamed to rfree(), so update the description
inside the mtd_oob_region structure as well.
Fixes: 8d38a8459b0d ("mtd: Rename free() to rfree()")
Reported-by: Mikhail Kshevetskiy <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Michael Trimarchi <[email protected]>
Reviewed-by: Dario Binacchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
This adds support for the dirmap API to the spi-nor subsystem, as
introduced in Linux commit df5c21002cf4 ("mtd: spi-nor: use
spi-mem dirmap API").
This patch is synchronize from the following patch
https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
The corresponding Linux kernel SHA1 is df5c21002cf4.
Signed-off-by: Chin-Ting Kuo <[email protected]>
Signed-off-by: Sean Anderson <[email protected]>
Acked-by: Pratyush Yadav <[email protected]>
|
|
Upstream linux commit 7bb427990ee364.
Rename the function to match this new behavior.
NOTE: fix nand_detect/nand_get_flash_type parameters in
mxs_nand_spl. This code seems never executed by any board
as alternative for nand detect
Signed-off-by: Michael Trimarchi <[email protected]>
Reviewed-by: Dario Binacchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Upstream linux commit 4722c0e958e636.
The returned "type" is never used in nand_scan_ident() and spl code
Make nand_get_flash_type() simply return an integer value in order
to avoid unnecessary ERR_PTR/PTR_ERR dance.
Signed-off-by: Michael Trimarchi <[email protected]>
Reviewed-by: Dario Binacchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Upstream linux commit 8cfb9ab68f9070.
Drop the 's' at the end of nand_manufacturers since the struct is actually
describing a single manufacturer, not a manufacturer table.
Signed-off-by: Michael Trimarchi <[email protected]>
Reviewed-by: Dario Binacchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Upstream linux commit 3b5206f4be9b65.
Move Macronix specific initialization logic into nand_macronix.c. This
is part of the "separate vendor specific code from core" cleanup
process.
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Upstream linux commit 229204da53b31d.
Move AMD/Spansion specific initialization/detection logic into
nand_amd.c. This is part of the "separate vendor specific code from
core" cleanup process.
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Upstream linux commit 10d4e75c36f6c1.
Move Micron specific initialization logic into nand_micron.c. This is
part of the "separate vendor specific code from core" cleanup process.
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Upstream linux commit 9b2d61f80b060c.
Move Toshiba specific initialization and detection logic into
nand_toshiba.c. This is part of the "separate vendor specific code from
core" cleanup process.
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Upstream linux commit 01389b6bd2f4f7.
Move Hynix specific initialization and detection logic into
nand_hynix.c. This is part of the "separate vendor specific code from
core" cleanup process.
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Upstream linux commit c51d0ac59f2420.
Move Samsung specific initialization and detection logic into
nand_samsung.c. This is part of the "separate vendor specific code from
core" cleanup process.
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
In preparation of moving specific nand support that are not jedec
or onfi
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
chip points to mtd. Passing chip is enough to have a reference
to mtd when is necessary
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Upstream linux commit abbe26d144ec22.
A lot of NANDs are implementing generic features in a non-generic way,
or are providing advanced auto-detection logic where the NAND ID bytes
meaning changes with the NAND generation.
Providing this vendor specific initialization step will allow us to get
rid of full-id entries in the nand_ids table or all the vendor specific
cases added over the time in the generic NAND ID decoding logic.
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Upstream linux commit 7f501f0a72036d.
Store the NAND ID in struct nand_chip to avoid passing id_data and id_len
as function parameters.
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
There was no user of this callback after 5b66fdb29dc3 anymore, and its
semantic as now inconsistent between stm and sst26. What we need for the
upcoming new usecase is a "completely unlocked" semantic. So consolidate
over this.
Signed-off-by: Jan Kiszka <[email protected]>
Acked-by: Jagan Teki <[email protected]>
|
|
Parse SCCR 22nd dword and check DTR Octal Mode Enable
Volatile bit for Octal DTR enable
Signed-off-by: JaimeLiao <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
Follow patch <f6adec1af4b2f5d3012480c6cdce7743b74a6156> (Allow using Micron mt35xu512aba
in Octal DTR mode).
Enable Octal DTR mode with 20 dummy cycles to allow running at the
maximum supported frequency for adding Macronix flash in Octal DTR mode.
-https://www.mxic.com.tw/Lists/Datasheet/Attachments/7841/MX25LM51245G,%203V,%20512Mb,%20v1.1.pdf
Signed-off-by: JaimeLiao <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
Replace reference to the correct name STMicroelectronics
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
We need to know where the typedef of 'ofnode' comes from.
Fixes: c86a4de8df61 ("mtd: Add flash_node in struct mtd_info")
Signed-off-by: Tom Rini <[email protected]>
|
|
Currently, add_mtd_partitions_of() can be used only if dev field of
mtd_info struct is populated. It's the case, for example, for a spi nor
flash, which has a DT compatible "jedec,spi-nor" and an associated
device. mtd->dev is populated in spi_nor_scan().
But in case of a raw nand node, mtd_info's dev field can't be populated
as flash node has no compatible, so no associated device.
add_mtd_partitions_of() can't be used to parse "partitions" subnode.
To remove this constraint, add an ofnode field in mtd_info struct
which reference the DT flash node. This new field is populated by
nand_scan_tail(). This new field will be used by add_mtd_partitions_of()
to parse the flash node for "partitions" defined in DT.
Signed-off-by: Patrice Chotard <[email protected]>
Cc: Farhan Ali <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Cc: Jagan Teki <[email protected]>
Cc: Marek Behun <[email protected]>
Cc: Miquel Raynal <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Wolfgang Denk <[email protected]>
|
