| Age | Commit message (Collapse) | Author |
|---|
|
Add support for DW HDMI Setup HPD status.
Signed-off-by: Jagan Teki <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
|
|
Add support for DW HDMI Read HPD status.
Signed-off-by: Jagan Teki <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
|
|
HPD detection on some DW HDMI designed SoC's would need to read and
setup the HPD status explicitly.
So, extend the HPD detection code by adding the dw_hdmi_detect_hpd
function and move the default detection code caller there.
The new read and setup hdp will integrate the same function in
later patches.
Signed-off-by: Jagan Teki <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
|
|
DW HDMI support Vendor PHY like Rockchip RK3328 Inno HDMI PHY.
Extend the vendor phy handling by adding platform phy hooks.
Signed-off-by: Jagan Teki <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/20444
- Make i.MX93 boot less verbose.
- Remove unneedd environment variables from Toradex i.MX boards.
- Use gpio-hog on verdin-imx8mm/imx8mp.
- Add PCIe support for i.MX8MM.
- Add TPM support for imx8m*-venice.
|
|
Previous patches enabled SetVariableRT using a RAM backend.
Although EBBR [0] defines a variable format we can teach userspace tools
and write the altered variables, it's better if we skip the ABI
requirements completely.
So let's add a new variable, in its own namespace called "VarToFile"
which contains a binary dump of the updated RT, BS and, NV variables
and will be updated when GetVariable is called.
Some adjustments are needed to do that.
Currently we discard BS-only variables in EBS(). We need to preserve
those on the RAM backend that exposes the variables. Since BS-only
variables can't appear at runtime we need to move the memory masking
checks from efi_var_collect() to efi_get_next_variable_name_mem()/
efi_get_variable_mem() and do the filtering at runtime.
We also need an efi_var_collect() variant available at runtime, in order
to construct the "VarToFile" buffer on the fly.
All users and applications (for linux) have to do when updating a variable
is dd that variable in the file described by "RTStorageVolatile".
Linux efivarfs uses a first 4 bytes of the output to represent attributes
in little-endian format. So, storing variables works like this:
$~ efibootmgr -n 0001
$~ dd if=/sys/firmware/efi/efivars/VarToFile-b2ac5fc9-92b7-4acd-aeac-11e818c3130c of=/boot/efi/ubootefi.var skip=4 bs=1
[0] https://arm-software.github.io/ebbr/index.html#document-chapter5-variable-storage
Suggested-by: Ard Biesheuvel <[email protected]> # dumping all variables to a variable
Co-developed-by: Heinrich Schuchardt <[email protected]> # contributed on efi_var_collect_mem()
Signed-off-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Previous patches enable SetVariable at runtime using a volatile storage
backend using EFI_RUNTIME_SERVICES_DATA allocared memory. Since there's
no recommendation from the spec on how to notify the OS, add a volatile
EFI variable that contains the filename relative to the ESP. OS'es
can use that file and update it at runtime
$~ efivar -p -n b2ac5fc9-92b7-4acd-aeac-11e818c3130c-RTStorageVolatile
GUID: b2ac5fc9-92b7-4acd-aeac-11e818c3130c
Name: "RTStorageVolatile"
Attributes:
Boot Service Access
Runtime Service Access
Value:
00000000 75 62 6f 6f 74 65 66 69 2e 76 61 72 00 |ubootefi.var. |
Reviewed-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Remove not needed variables from environment and include config files.
- setup variable used to be executed from some bootscript, however
it's not required and there is no point on having this small helper
here
- boot_file, kernel_file, ip_dyn variables are not used anywhere
- fdt_fixup variable is just set empty
- defargs, vidargs variables used to be used from some bootscript,
however there is no point on having it here and even old legacy
bootscript can work without them
- removed CONFIG_ENABLE_DDR_TRAINING_DEBUG, this is a leftover from
some copy/paste
On colibri imx6ull/imx7 NAND module, remove consoleblank=0, this is
already the Linux kernel default therefore useless.
Various Linux Kernel command line options removed are not-existing
left-over that applied to some old NXP i.MX downstream branch
Signed-off-by: Francesco Dolcini <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-20240419
- new "fastboot oem board" command
|
|
enabled""
As reported by Jonas Karlman this series breaks booting on some AArch64
platforms with common use cases. For now the best path forward is to
revert the series.
This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing
changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc.
Link: https://lore.kernel.org/u-boot/[email protected]/
Signed-off-by: Tom Rini <[email protected]>
|
|
Currently, fastboot protocol in U-Boot has no opportunity
to execute vendor custom code with verifed boot. This patch
introduce new fastboot subcommand fastboot oem board:<cmd>,
which allow to run custom oem_board function.
Default implementation is __weak. Vendor must redefine it in
board/ folder with his own logic.
For example, some vendors have their custom nand/emmc partition
flashing or erasing. Here some typical command for such use cases:
- flashing:
$ fastboot stage bootloader.img
$ fastboot oem board:write_bootloader
- erasing:
$ fastboot oem board:erase_env
Signed-off-by: Alexey Romanov <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Set generic mmc->tuning flag when performing tuning to indicate
this condition to drivers. Drivers may use this to bypass various
checks during tuning.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
|
|
This hs400_tuning is a flag, make it bool. No functional change.
This will be useful in the following patch, which adds another
more generic flag, where the compiler can better use the space
now reserved for the u8 to store more flags in it.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
|
|
The cmd_error parameter is not used, remove it.
Signed-off-by: Marek Vasut <[email protected]>
|
|
With MMC_PWRSEQ enabled the following link issue may happen when
building SPL and SPL_PWRSEQ is not enabled.
aarch64-linux-gnu-ld.bfd: drivers/mmc/meson_gx_mmc.o: in function `meson_mmc_probe':
drivers/mmc/meson_gx_mmc.c:295: undefined reference to `pwrseq_set_power'
Fix this by adding a SPL_MMC_PWRSEQ Kconfig option used to enable mmc
pwrseq support in SPL.
Also add depends on DM_GPIO to fix following link issue:
aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.o: in function `mmc_pwrseq_set_power':
drivers/mmc/mmc-pwrseq.c:26: undefined reference to `gpio_request_by_name'
aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.c:29: undefined reference to `dm_gpio_set_value'
aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.c:31: undefined reference to `dm_gpio_set_value'
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Ferass El Hafidi <[email protected]>
|
|
|
|
Add support for XTX XT26G0xA and XT26xxxD. The driver is ported from
linux-6.7.1. This driver is tested on Banana BPI-R3 with XT26G01A and
XT26G12D.
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Bruce Suen <[email protected]>
Reviewed-by: Frieder Schrempf <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Introduced in upstream Linux with commit 7a08dbaedd365 for release v5.0.
When the new atmel nand driver was backported to U-Boot with commit
6a8dfd57220d ("nand: atmel: Add DM based NAND driver") that definition
was added to the driver instead of the header file. Move it over to the
other definitions with the same help text it has in Linux.
Code actually using this has not been ported over to raw nand base yet.
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Alexander Dahl <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2024-07-rc1-2
Documentation:
* bump build dependency idna to 3.7
* update docker image reference to latest
* fix section levels in gen_compile_commands
* fix references to trace doc
UEFI:
* eliminate duplicate runtime section definitions
* let 'EFI using ACPI tables at' be a debug message
* sanitize efi_tcg2_final_events_table definition
* move efi_var_collect to common functions
* improve error messages in variables unit test by using
EFI_UNSUPPORTED for private authenticated variables
|
|
The length of the variable name typically is not 1.
Neither the length of the variable name nor the size of the appended
data is known in the include.
* Define the size of element variable_name as variable.
* Remove the unusable element variable_data.
Addresses-Coverity-ID: 467400 Out-of-bounds read
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
The following symbols are defined in two includes:
* __efi_runtime_start[]
* __efi_runtime_stop[]
* __efi_runtime_rel_start[]
* __efi_runtime_rel_stop[]
Eliminate the definitions in efi_loader.h.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Eugene Uriev <[email protected]> says:
There was no "mcheck" for U-Boot before.
Since U-Boot has only 1 thread, and normally makes 4000+ - 6000+
mallocs, it's better to use havier canaries to protect heap-chunks.
My variant uses 2x8 = 16byte-long protector. And
the multiplier could be changed to tune speed/protection tradeoff.
This protects not only against memset()-s, but against "near" wild
pointers too, and makes more probable to catch "distant" ones.
The core file of the set is included into the C-file, not complied
separately in order to enable (potential) coexisting of
mcheck-protectors, e.g. malloc_simple(.) and dlmalloc simultaneously.
My tests were for ARM SoC, 64bit, so the patch is
aware of alignment.
Primary this patch is for using by developers: to verify,
if a change doesn't break the heap integrity.
By default the mcheck is disabled and wouldn't affect the boot.
I used pedantic mode, canary=16byte, registry-size=6608.
For my system the overhead was 230ms.
|
|
Signed-off-by: Eugene Uriev <[email protected]>
|
|
The pedantic mode is run-time contolled, so
appropriate registry take place everytime.
Maybe it's worth to use compile-time control only.
So, the registry could be optimized out by an #ifdef.
Signed-off-by: Eugene Uriev <[email protected]>
|
|
The core part of mcheck, but without memalign.
memalign - to be added in ensuing commits.
Signed-off-by: Eugene Uriev <[email protected]>
|
|
Michal Simek <[email protected]> says:
It looks like that only CVE-2016-9841 is not fixed and this series is
trying to address it. The first two patches are just preparation based on
changes which happened in past. The third one is actual fix and the last
one is following what has been done in Linux kernel long time ago and don't
use incorrect zlib version string.
I tested it with and I can't see any issue.
./test/py/test.py --bd sandbox --build -s
And gitlab CI is also not showing any issue.
|
|
Get rid of zlib version which is not correct because of U-Boot related
changes and various CVE backports.
The change in inspired by Linux kernel commit 4f3865fb57a0 ("[PATCH]
zlib_inflate: Upgrade library code to a recent version") which described
ZLIB_VERSION removal as
"This patch also removes ZLIB_VERSION as it no longer has a correct value.
We don't need version checks anyway as the kernel's module handling will
take care of that for us. This removal is also more in keeping with the
zlib author's wishes (http://www.zlib.net/zlib_faq.html#faq24) and I've
added something to the zlib.h header to note its a modified version."
Author describes wish to follow this guidance at
https://www.zlib.net/zlib_faq.html#faq24:
"The license says that altered source versions must be "plainly marked". So
what exactly do I need to do to meet that requirement?
You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In
particular, the final version number needs to be changed to f, and an
identification string should be appended to ZLIB_VERSION. Version numbers
x.x.x.f are reserved for modifications to zlib by others than the zlib
maintainers. For example, if the version of the base zlib you are altering
is 1.2.3.4, then in zlib.h you should change ZLIB_VERNUM to 0x123f, and
ZLIB_VERSION to something like 1.2.3.f-zachary-mods-v3. You can also update
the version strings in deflate.c and inftrees.c."
But U-Boot is not exact version that's why following the same style which
has been used by Linux kernel where ZLIB_VERSION is completely removed.
Signed-off-by: Michal Simek <[email protected]>
|
|
Add the environment variable "usb_ignorelist" to prevent USB devices
listed in it from being bound to drivers. This allows to ignore devices
which are undesirable or trigger bugs in u-boot's USB stack.
Devices emulating keyboards are one example of undesirable devices as
u-boot currently supports only a single USB keyboard device. Most
commonly, people run into this with Yubikeys, so let's ignore those in
the default environment.
Based on previous USB keyboard specific patches for the same purpose.
Link: https://lore.kernel.org/u-boot/[email protected]/
Reviewed-by: Neal Gompa <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Janne Grunau <[email protected]>
|
|
phys_addr_t"
|
|
Change type of ulong env_get_bootm_low() to phys_addr_t env_get_bootm_low().
The PPC/LS systems already treat env_get_bootm_low() result as phys_addr_t,
while the function itself still returns ulong. This is potentially dangerous
on 64bit systems, where ulong might not be large enough to hold the content
of "bootm_low" environment variable. Fix it by using phys_addr_t, similar to
what env_get_bootm_size() does, which returns phys_size_t .
Reviewed-by: Laurent Pinchart <[email protected]>
Reported-by: Laurent Pinchart <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series is the culmanation of the current line of refactoring
series. It adjusts pxe to call the booting functionality directly
rather than going through the command-line interface.
With this is is possible to boot using the extlinux bootmeth without
the command line enabled.
It also updates fastboot to do a similar thing.
|
|
Allow the default command line to be used when booting the OS. This is
needed by fastboot.
Signed-off-by: Simon Glass <[email protected]>
|
|
Given the name of this variable, it should be an address, not a
pointer. Update this, to make it easier to use with sandbox.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Dmitrii Merkurev <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]> # on vim3
|
|
Simon Glass <[email protected]> says:
This series refactors the zboot code to allow it to be used with
CONFIG_COMMAND disabled.
A new zboot_run() function is used to boot a zimage.
|
|
The current use case (ChromeOS) is the uncommon case. Document how this
function is more normally used, where base is 0 and cmdline is NULL
Signed-off-by: Simon Glass <[email protected]>
|
|
The term 'start' is used withint bootm and zboot to indicate the first
phase of booting an image.
Since zboot_start() does the whole boot, rename it to zboot_run() to
align with bootm_run() etc.
Fix a log message while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
efi_default_filename.h requires HOST_ARCH to be defined. Up to now we
defined it via a CFLAGS. This does not scale. Add the symbol to
version_autogenerated.h instead.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
We don't yet support EFI_VARIABLE_ENHANCED_AUTHENTICATED_ACCESS for file
based variables, but we should pass it to TEE based variable stores.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
GetVariable() and SetVariable() only accept a 32bit value for attributes.
It makes not sense to define EFI_VARIABLE_READ_ONLY as unsigned long.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
GetVariable() and SetVariable() use an uint32_t value for attributes.
The UEFI specification defines the related constants as 32bit.
Add the missing EFI_VARIABLE_ENHANCED_AUTHENTICATED_ACCESS constant.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/20228
- Convert imx8mp-beacon and verdin-imx8mm/verdin-imx8mp to OF_UPSTREAM.
- Enable PCIe NVMe support on imx8mp_beacon.
- Fix Ethernet and board detection on mx6cuboxi.
- Fix signature_block_hdr struct fields.
- Fix imx9_probe_mu prototype and make it to get called in
EVT_DM_POST_INIT_R.
- Test whether ethernet node is enabled before reading MAC EEPROM on
DHSOM SoMs.
|
|
https://source.denx.de/u-boot/custodians/u-boot-amlogic
- jethubj100: fix config, MAINTAINERS & update docs
- Switch GXL, GXM, AXG, G12A, G12B & SM1 to using upstream DT
|
|
According to the documentation (for example NXP's AN13994 on encrypted
boot on AHAB-enabled devices), the format of the signature block is:
+--------------+--------------+--------------+-------------+
| Tag | Length - msb | Length - lsb | Version |
+--------------+--------------+--------------+-------------+
| SRK Table offset | Certificate offset |
+-----------------------------+----------------------------+
| Blob offset | Signature offset |
+-----------------------------+----------------------------+
There is no runtime error in the current u-boot code. The only user of
struct signature_block_hdr is the "get_container_size" function in the
"arch/arm/mach-imx/image-container.c" file, and it's only using the very
first fields of the struct (which are in the correct position) and thus
there is no runtime failure.
On the other hand, extending the code to get the data encryption key
blob offset on the signature header gives a wrong value as the field is
in the wrong order.
Signed-off-by: Javier Viguera <[email protected]>
|
|
The xhci driver currently only does the necessary initialization for
endpoints found in the first interface descriptor. Apple USB keyboards
(released 2021) use the second interface descriptor for the HID keyboard
boot protocol. To allow USB drivers to use endpoints from other
interface descriptors the xhci driver needs to ensure these endpoints
are initialized as well.
Use USB_MAX_ACTIVE_INTERFACES to control how many interface descriptors
are considered during endpoint initialisation.
For now define it to 2 as that is sufficient for supporting the Apple
keyboards.
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Neal Gompa <[email protected]>
Signed-off-by: Janne Grunau <[email protected]>
|
|
Since meson G12A, G12B & SM1 based boards switched to using upstream DT,
so drop redundant files from arch/arm/dts directory. Only *-u-boot.dtsi files
kept in arch/arm/dts directory for these boards.
Cc: Sumit Garg <[email protected]>
Acked-by: Viacheslav Bocharov <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]> # khadas-vim3_android
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Since meson GXL, GXM & AXG based boards switched to using upstream DT,
so drop redundant files from arch/arm/dts directory. Only *-u-boot.dtsi files
kept in arch/arm/dts directory for these boards.
Cc: Sumit Garg <[email protected]>
Acked-by: Viacheslav Bocharov <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]> # khadas-vim3_android
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
is selected
Remove amlogic/ path prefix in CFG_EXTRA_ENV_SETTINGS fdtfile when
using CONFIG_OF_UPSTREAM, otherwise amlogic/ is added twice.
Tested-by: Mattijs Korpershoek <[email protected]> # khadas-vim3_android
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Fix JetHub board sequence to read correct gpio for rescue button
Signed-off-by: Viacheslav Bocharov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Add header containing all MCU command definitions and use it in board
code and in MCU driver.
Signed-off-by: Marek Behún <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-next-20240402
- Implement Qualcomm wrapper for dwc3
- Multiple sector size support for UMS
- CDC ACM gadget initialization fix
- Refactor board code from dwc3 to prepare better interrupt support
- Bugfix for for qcom-smmu when compiling with -DDEBUG
|
