| Age | Commit message (Collapse) | Author |
|---|
|
Variable $fdtfile needs to be set for automatically loading a device-tree
from the ESP or boot partition.
* Set CONFIG_DEFAULT_FDT_FILE in the defconfig.
* Add $fdtfile to the default environment.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Tom Rini <[email protected]> says:
This small series separates "bloblist" and "standard passage" to allow
for these similar concepts to explore solutions to problems without
introduces breaking changes to the other.
Link: https://lore.kernel.org/r/[email protected]
|
|
In previous commit, incoming standard passage is used by default
when initializing the bloblist, so explicitly BLOBLIST_PASSAGE is
no more needed.
Rename it as BLOBLIST_PASSAGE_MANDATORY to determine the behaviors
when an incoming transfer list does not exist or is invalid.
When it is selected, incoming standard passage is mandatory and
U-Boot will report an error when a valid incoming transfer list is
missing.
Signed-off-by: Raymond Mao <[email protected]>
|
|
Refactor the xferlist to remove the relocating when bloblist passed
from the boot args.
Refactor bloblist init to use incoming standard passage by default
if a valid transfer list exists in the boot args.
For bloblist relocation, use the actual total size if it has a smaller
BLOBLIST_SIZE_RELOC.
Signed-off-by: Raymond Mao <[email protected]>
Suggested-by: Ilias Apalodimas <[email protected]>
|
|
clock/rk3288-cru.h in include/dt-bindings is almost identical to the
version in dts/upstream, remove the copy from include/dt-bindings to
only use the version from dts/upstream.
One clk, SCLK_MAC_PLL, is not part of the upstream bindings, this clk is
not used by upstream, in-tree or vendor DTs and can safely be dropped.
No functional change to board DTs is intended with this removal.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The device tree for rk3036 combined is now
available in the /dts/upstream directory.
Use imply OF_UPSTREAM to migrate all rk3036 boards.
Reviewed-by: Kever Yang <[email protected]>
Signed-off-by: Johan Jonker <[email protected]>
|
|
As per TRM[0] Section 8.7.1 "TPS6594-Q1 Registers", LDOx_Vout
bit 6-1, define the NVM voltage settings.
Along side table 8-4 of above TRM, shows voltage to value mapping.
Driver wrongly using bits 5-1 to calculate voltage, and to convert
voltage to value driver was using buck's calculation.
So fix those calculation.
[0]: https://www.ti.com/lit/ds/symlink/tps6594-q1.pdf
Fixes: 5d7dbd22cf7d ("power: regulator: tps65941: use function callbacks for conversion ops")
Signed-off-by: Udit Kumar <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
The Acer Iconia A500 is a tablet computer designed, developed and
marketed by Acer Inc. It is powered by 1 GHz Nvidia Tegra 2 processor
and 1GB DDR2 RAM. The A500 is sold with 64 GB, although both 16 GB
and 32 GB models are available.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Add support for starting TFA from U-Boot running in EL3 as part of
fitImage boot, so the user can start U-Boot in the highest privilege
level on the platform, bundle TFA, Linux, DT into a single fitImage
and boot such a bundle as a whole.
There are two main benefits of this approach. First is the ability
to run U-Boot in EL3, where it has unrestricted access to the entire
system and can act as a useful debug tool, as it was always intended
to be used. Second is the ability to easily and safely update of any
component in the fitImage, be it TFA, Linux or DT.
The boot process is similar to regular Linux with DT fitImage boot
process, except the TFA has to be bundled into the fitImage. For the
bundling instructions, see below. The TFA is started as a 'loadables'
with custom U_BOOT_FIT_LOADABLE_HANDLER and armv8_switch_to_el2_prep()
handling implemented in board code, and performing the handoff and
boot in case the TFA was loaded.
The loadables handler is optional and meant to set up any sort of
handoff structures used by the TFA BL31 or perform any other setup
that is needed by the blob. The custom armv8_switch_to_el2_prep()
has to implement the jump to TFA BL31 with return to U-Boot just
before booting the Linux kernel.
Example fitImage image and configuration section:
/dts-v1/;
/ {
description = "Linux kernel with FDT blob and TFA BL31";
images {
kernel-1 { ... };
fdt-1 { ... };
atf-1 { /* This is the TFA BL31 image */
description = "TFA BL31";
data = /incbin/("../build/plat/release/bl31.bin");
type = "tfa-bl31";
arch = "arm64";
os = "arm-trusted-firmware";
compression = "none";
load = <0x46400000>;
entry = <0x46400000>;
};
};
configurations {
default = "conf-1";
conf-1 {
description = "Boot Linux";
kernel = "kernel-1";
fdt = "fdt-1";
loadables = "atf-1"; /* This is the TFA BL31 loadable */
};
};
};
Reviewed-by: Tom Rini <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add CONFIG_BOOTCOUNT_ALTBOOTCMD so the developer is able to add
custom altbootcmd via Kconfig when they enable BOOTCOUNT. With this now
in Kconfig, we need to move it from environment files / config.h files
and in to the defconfig file.
This was done by generating u-boot-initial-env for all platforms before
the Kconfig change, to extract altbootcmd values and then again after to
compare the result.
[trini: Perform migration to defconfigs, reword commit message]
Signed-off-by: Tom Rini <[email protected]>
|
|
Implement library function strnstr().
Implement strstr() using strnstr().
Sort the includes.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
[jf: replace <stdint.h> by <limits.h>, folded from next patch]
Signed-off-by: Jerome Forissier <[email protected]>
|
|
Move the initialization of the ethernet devices out of the new_netif()
function. Indeed, new_netif() accepts a struct device argument, which
is expected to be valid and active. The activation and selection of
this device are achieved by eth_init() (on first time the network
stack is used) and eth_set_current(). This is what takes care of the
ethrotate and ethact environment variables. Therefore, move these calls
to a new function: net_lwip_set_current(), and use it whenever a
net-lwip command is run.
This patch hopefully fixes the incorrect net-lwip behavior observed on
boards with multiple ethernet interfaces [1].
Tested on an i.MX8MPlus EVK equipped wih two ethernet ports. The dhcp
command succeeds whether the cable is plugged into the first or second
port.
[1] https://lists.denx.de/pipermail/u-boot/2025-January/576326.html
Reported-by: E Shattow <[email protected]>
Tested-by: E Shattow <[email protected]>
Signed-off-by: Jerome Forissier <[email protected]>
|
|
This file is empty now. Remove it and its uses.
Signed-off-by: Simon Glass <[email protected]>
|
|
This function is not used outside the cmd_ut file anymore, so make it
static.
Signed-off-by: Simon Glass <[email protected]>
|
|
Now that everything is using the new test-suite features, drop support
for running commands.
Fix a missing closing-bracket while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use the new suite-runner to run these tests instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Fix the comment abotu 'environment' while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use the new suite-runner to run these tests instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use the new suite-runner to run these tests instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use fdt_overlay consistently in the identifiers and file/dir names.
Signed-off-by: Simon Glass <[email protected]>
|
|
Some suites need things to be set up before they can run. Add a way to
declare an init function using the UNIT_TEST_INIT() macro. The init
function is just like any other test, but is always placed first so that
it runs before all the other test functions in the suite.
Add an uninit function as well, to clean up after the test.
Signed-off-by: Simon Glass <[email protected]>
|
|
Show the average duration of a test, so we can keep track of how it is
trending. Report the suite with the longest average test to encourage
people to improve it.
Add a function to update the stats based on the results from a single
suite and another to show the summary information.
Make this optional, since sandbox's SPL tests do not have a timer driver
and people may want to print results without times.
Signed-off-by: Simon Glass <[email protected]>
|
|
Show the time taken by each test suite with 'ut all' and the total time
for all suites.
Take care to remove any sandbox time-offset from the values.
Fix the comment-format on timer_test_add_offset() while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
Harrison Mutai <[email protected]> says:
This series of patches enhances the vexpress64 platform by enabling bloblist
support. It also introduces support for CONFIG_BLOBLIST_PASSAGE. This is
necessary to boot vexpress64 and other boards without manually specifying a
fixed address and size for the bloblist.
After this change, all the bloblist init modes are supported (i.e., fixed,
alloc, passage) and Vexpress64 boots with CONFIG_BLOBLIST_PASSAGE.
Link: https://lore.kernel.org/r/[email protected]
|
|
When booting into the Linux kernel with semi-hosting, use the device
tree provided by hardware unless one is provided in the current
directory.
Signed-off-by: Harrison Mutai <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
|
|
Fix the two typos in the spelling of same and set in common/Kconfig and
include/bloblist.h.
Signed-off-by: Harrison Mutai <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-20250211:
CI:
- https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/24556
Android:
- Handle boot images with missing DTB
Usb gadget:
- Fix nullptr in g_dnl when serial# is unset
- Add missing schedule() in f_mass_storage gadget
- Add support for STih407 in dwc3-generic
- Fix usb clocks on STih407
- Migrate STih407 to DM_USB_GADGET
|
|
STi will migrate to dwc3-generic driver, dwc3-sti-glue driver
can be removed.
Signed-off-by: Patrice Chotard <[email protected]>
Cc: Marek Vasut <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Add the optargs variable so that we can set optional arguments while
booting.
Signed-off-by: Nathan Morrisson <[email protected]>
Signed-off-by: Daniel Schultz <[email protected]>
|
|
Heiko Schocher <[email protected]> says:
In linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This series adds support for parsing this properties if there
is no label property.
Link: https://lore.kernel.org/r/[email protected]
[trini: Document name parameter in led.h]
|
|
in linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This patch adds support for parsing this properties if there
is no label property.
The led name is created in led_post_bind() and we need some
storage place for it. Currently this patch prevents to use
malloc() instead it stores the name in new member :
char name[LED_MAX_NAME_SIZE];
of struct led_uc_plat. While at it append led tests for the
new feature.
Signed-off-by: Heiko Schocher <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-microblaze
AMD/Xilinx changes for v2025.04-rc2
fpga:
- Cleanup help
- Show xilinx only options on Xilinx devices
ospi-versal:
- Fix alignment issue
- Fix cadence_qspi_flash_reset() prototype
zynqmp:
- Define usb_pgood_delay
- Fix bootseq number
versal:
- Fix mini_ospi configuration
versal2:
- Enable OPTEE
xilinx:
- Enable some flashes
- Clean up SYS_MALLOC_F_LEN Kconfig
- Some binman fixes
- DT updates
- Enable mkfwumdata compilation
- Enable meminfo command
- Switch to LWIP and enable HTTPS
|
|
Fixes annoying warnings of the following type when built with W=1 (for
each file including fpga.h):
CC drivers/fpga/fpga.o
In file included from /mnt/data/adahl/src/u-boot/include/xilinx.h:7,
from /mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:10:
/mnt/data/adahl/src/u-boot/include/fpga.h:61:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
61 | const fpga_desc *const fpga_get_desc(int devnum);
| ^~~~~
/mnt/data/adahl/src/u-boot/include/fpga.h:81:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
81 | const fpga_desc *const fpga_validate(int devnum, const void *buf,
| ^~~~~
/mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:36:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
36 | const fpga_desc *const fpga_get_desc(int devnum)
| ^~~~~
/mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:53:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
53 | const fpga_desc *const fpga_validate(int devnum, const void *buf,
| ^~~~~
Do some type and cast cleanup on that fpga_desc type while at it.
Link: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wignored-qualifiers
Signed-off-by: Alexander Dahl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Add usb_pgood_delay to ensure proper detection of USB devices.
Increase the USB power good delay on the SOM boards, as this
is required for certain USB sticks otherwise, they may not
be detected.
Signed-off-by: Prasad Kummari <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Add support for the R-Car S4 Starter Kit with R8A779F4 SoC support.
This implementation natively uses OF_UPSTREAM to pull in most recent
DT. The defconfig is derived from S4 Spider, with reduced UART baud
rate to 921600 Bdps. The DT alias to rswitch is removed as the alias
should point to rswitch ports, not to rswitch itself, see [1].
[1] https://lore.kernel.org/linux-arm-kernel/[email protected]/
Signed-off-by: Marek Vasut <[email protected]>
|
|
So far only VBE-simple is implemented in U-Boot. This supports a single
image which can be updated in situ.
It is often necessary to support two images (A and B) so that the board
is not bricked if the update is interrupted or is bad.
In some cases, a non-updatable recovery image is desirable, so that the
board can be returned to a known-good state in the event of a serious
failure.
Introduce ABrec which provides these features. It supports three
independent images and the logic to select the desired one on boot.
While we are here, fix a debug message to indicate the function it
called. Provide a maintainers entry for VBE.
Note that fwupdated only supports VBE-simple so far, but supports for
ABrec will appear in time.
Signed-off-by: Simon Glass <[email protected]>
|
|
When VBE operates within VPL it does not want the FDT to be changed.
Provide a way to disable this feature.
Move the FIT_IMAGE_TINY condition out of spl_fit_record_loadable() so
that both conditions are together. This makes the code easier to
understand.
Replace the existing fit_loaded member, which is no-longer used.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a linker symbol which can be used to mark relocation code, so it can
be collected by the linker and copied into a suitable place and executed
when needed.
Signed-off-by: Simon Glass <[email protected]>
|
|
Some phases may wish to use full FIT-loading and others not, so allow
this to be controlled.
Add some debugging while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-stm
STM32 MPU:
- Remove dt-bindings headers available in dts/upstream
- Fixes for stm32prog
- Enable CONFIG_SYS_64BIT_LBA for STM32MP15/13/25 defconfigs
- Add upport of ck_usbo_48m in pre-reloc stage for STM32MP13
- Clean env_get_location() for STM32MP1
- Fix board_get_usable_ram_top() to fix infinite loop in cache
management for STM32MP2.
- Fix ck_flexgen_08 frequency for STM32MP2
STM32 MCU:
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F469-Disco
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F769-Disco
|
|
Some dt-binding headers mask the upstream ones which can lead to build
failures, or worse: super weird bugs, if they get out of sync.
Remove these headers so our devicetree and binding headers will both be
in sync with upstream.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Weijie Gao <[email protected]> says:
This patch series add support for MediaTek MT7987 SoC with its reference
boards and related drivers.
This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for these
boards. The clock, pinctrl drivers and the SoC initializaton code are also
included.
Link: https://lore.kernel.org/r/[email protected]
|
|
This patch adds general board files based on MT7987 SoC.
MT7987 uses one mmc controller for booting from both SD and eMMC, and the
pins of mmc controller are also shared with one spi controller.
So three configs are need for these boot types:
1. mt7987_rfb_defconfig - SPI-NOR (spi2) and SPI-NAND (spi0)
2. mt7987_emmc_rfb_defconfig - eMMC + SPI-NOR (spi2)
3. mt7987_sd_rfb_defconfig - SD + SPI-NOR (spi2)
Note: spi2 also supports booting from SPI-NAND, but not the default option.
Signed-off-by: Sam Shih <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
This patch adds clock driver support for MediaTek MT7987 SoC
Signed-off-by: Sam Shih <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
Multiple drivers copy the MDIO instance name from struct mii_phy to
struct bb_miiphy_bus, but the name field in these two structs have
different lengths, the bb_miiphy_bus one is 16 bytes, the source one
is 32 bytes. Make sure these two lengths are always synchronized, use
MDIO_NAME_LEN for both.
Reviewed-by: Paul Barker <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
It seems that every remaining system which enables BITBANGMII also
enables BITBANGMII_MULTI . Remove the BITBANGMII_MULTI symbol and
assume it is always enabled. This allows removal of a bit of legacy
code. No functional change intended.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tpm
CI: https://source.denx.de/u-boot/custodians/u-boot-tpm/-/pipelines/24375
We have use cases where a previous stage boot loader doesn't have any
TPM drivers. Instead of extending the hardware PCRs it produces an
EventLog that U-Boot later replays on the hardware.
The only real example we have is TF-A, which produces the EventLog using
hashing algorithms created at compile time. This creates a problem to the
TPM since measurements need to extend all active PCR banks. Up to now
we were exiting refusing the extend measurements.
TPMs can be instructed to change their active PCR banks, as long as the
device resets immediately after a reconfiguration. This PR is adding
that functionality. U-Boot can now scan the currently active TPM PCR
banks, the ones it was compiled to support and the ones present in an
EventLog. It the reconfigures the TPM on the fly with the correct algorithms.
|
|
Add initial support for Marvell PXA1908. The SoC has 4 Cortex-A53 cores,
a GC7000UL GPU and a variety of peripheral controllers.
Signed-off-by: Duje Mihanović <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Enable bootstd for OpenRD boards
Update defconfigs to the latest u-boot requirements
Remove JFFS2 support. See JFFS2 Vulnerability[1].
Move default envs to text-base environment
[1] https://lore.kernel.org/u-boot/20241114233005.GN3600562@bill-the-cat/T/#m2fc25da1d2c019bc3cd8676991fdd64b8a21aa9b
Signed-off-by: Tony Dinh <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
