| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Anatolij Gustschin <[email protected]>
|
|
Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
800x600, 640x480 at 24, 16 and 8 bpp.
Signed-off-by: Anatolij Gustschin <[email protected]>
|
|
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
|
|
|
|
Conflicts:
common/cmd_reginfo.c
Signed-off-by: Wolfgang Denk <[email protected]>
|
|
|
|
|
|
|
|
|
|
Signed-off-by: Wolfgang Denk <[email protected]>
|
|
Conflicts:
Makefile
doc/README.standalone
Signed-off-by: Wolfgang Denk <[email protected]>
|
|
The address of SH7722 is wrong by old document.
This patch fixes this problem.
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
|
|
Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
Update the get_clocks() function in 85xx and 86xx to determine the I2C
clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
Signed-off-by: Timur Tabi <[email protected]>
|
|
Get board name consistent with Linux and elsewhere;
get rid of local network definitions etc.
Signed-off-by: Wolfgang Denk <[email protected]>
|
|
R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
will refuse to use load/store multiple insns; instead, it issues a
list of simple load/store instructions upon function entry and exit,
resulting in bigger code size, which in turn makes the build for a
few boards fail.
Use r2 instead.
Signed-off-by: Wolfgang Denk <[email protected]>
|
|
|
|
|
|
Signed-off-by: Mike Frysinger <[email protected]>
|
|
update comments
Fix coding style
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
|
|
Signed-off-by: Kumar Gala <[email protected]>
|
|
These replace direct structure references for IMMR sections.
Signed-off-by: Jon Loeliger <[email protected]>
|
|
|
|
|
|
Signed-off-by: Wolfgang Denk <[email protected]>
|
|
Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
The inclusion of this line makes it impossible to enable debug code in
other source files, because "#define DEBUG" typically needs to be defined
before any header files are included.
Signed-off-by: Timur Tabi <[email protected]>
|
|
Signed-off-by: John Rigby <[email protected]>
Signed-off-by: Grzegorz Bernacki <[email protected]>
|
|
Changes to match 5121 device tree going mainline in 2.6.25.
Change OF_SOC from "soc5121" to plain "soc".
Remove unneeded "ref-frequency" fixups.
Remove "address" enetaddr fixup.
Add bus-frequency fixup for old OF_SOC so old
kernels with old device trees will work with new
u-boot with 66MHz IPS clock
Signed-off-by: John Rigby <[email protected]>
|
|
Recommended frequency is 66MHz
Change divider from 4 to 3.
Signed-off-by: John Rigby <[email protected]>
|
|
missing migration from "Cleanup of some init functions"
in c837dcb1a316745092567bfe4fb266d0941884ff
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
|
|
The existing code assumes the SDRAM row refresh period should always
be 15.6 us. This is not always true, and indeed on the ATNGW100, the
refresh rate should really be 7.81 us.
Add a refresh_period member to struct sdram_info and initialize it
properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
panic() until the refresh_period member is updated properly.
Big thanks to Gerhard Berghofer for pointing out this issue.
Signed-off-by: Haavard Skinnemoen <[email protected]>
|
|
The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
wouldn't have worked anyway since the board can only access 4MB of
SDRAM.
Signed-off-by: Haavard Skinnemoen <[email protected]>
|
|
Many people run into problems when they compile a big kernel and load
the uImage at the default SDRAM + 2MB address as the kernel will
overwrite the uImage as it is being unpacked. Increase the default
load address so that we can load a 4MB kernel image without any
problems.
Signed-off-by: Haavard Skinnemoen <[email protected]>
|
|
Let mtest cover the whole SDRAM except the last megabyte, which is
where u-boot lives.
Signed-off-by: Haavard Skinnemoen <[email protected]>
|
|
Signed-off-by: Mike Frysinger <[email protected]>
|
|
Signed-off-by: Mike Frysinger <[email protected]>
|
|
Signed-off-by: Mike Frysinger <[email protected]>
|
|
Signed-off-by: Mike Frysinger <[email protected]>
|
|
Signed-off-by: Mike Frysinger <[email protected]>
|
|
This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
Signed-off-by: Harald Welte <[email protected]>
|
|
This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
plus a stub implementation of it for the S3C2410.
The purpose is to allow arm920t implementations such as the s3c24x0 to
implement interrupt handlers in u-boot without having to touch core
arm920t code.
Signed-off-by: Harald Welte <[email protected]>
|
|
Signed-off-by: Stefan Roese <[email protected]>
|
|
Signed-off-by: Ladislav Michl <[email protected]>
|
|
Signed-off-by: Ladislav Michl <[email protected]>
Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
indentation.
|
|
Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
I'm sending this patch 4th (!) time in hope it produces at least some
reaction.
Signed-off-by: Ladislav Michl <[email protected]>
Fix at91rm9200dk base and environment address.
|
|
MMC support for X_Scale PXA is broken and does not work.
Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
There were already some patches around the world but none of them was
merged into the official u-boot tree.
This patch makes order fixing this issue. Resubmit after code cleanup.
Applied and tested on PXA 270 (TrizepsIV module).
Signed-off-by: Stefano Babic <[email protected]>
|
|
Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
issues generates wrong code.
(Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
This patch fixes the problem and solves the gcc-4 issues as the linux
kernel does.
Signed-off-by: Stefano Babic <[email protected]>
Signed-off-by: Dmitry Ivanov <[email protected]>
|
|
Signed-off-by: Jens Gehrlein <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
|
|
Bit).
Signed-off-by: Jens Gehrlein <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
|
|
This driver should only compile if CONFIG_MPC8XXX_SPI is set
Signed-off-by: Ben Warren <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
|
|
Signed-off-by: Becky Bruce <[email protected]>
|
