| Age | Commit message (Collapse) | Author |
|---|
|
This patch changed the SICRL_USBDR define to reflect the 4 different bit
settings for this two-bit field. The four different options are '00', '01',
'10', and '11'. This patch also corrects the config file for SIMPC8313 and
MPC8313ERDB for the appropriate fields. This change only affects the MPC8313
cpu.
Signed-off-by: Ron Madrid <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
|
|
|
|
The nios-32 arch is obsolete and broken. So it is removed.
Signed-off-by: Thomas Chou <[email protected]>
|
|
This patch adds gpio support of Altera PIO component to the
nios2-generic board. Though it drives only gpio_led at the
moment, it supports bidirectional port to control bit-banging
I2C, NAND flash busy status or button switches, etc.
Signed-off-by: Thomas Chou <[email protected]>
Tested-by: Ian Abbott <[email protected]>
Signed-off-by: Scott McNutt <[email protected]>
|
|
create_pipe() can give wrong result if an expression is passed as the 'endpoint'
argument -- due to missing parentheses.
Thanks to Martin Mueller for finding the bug and providing the patch.
Signed-off-by: Sergei Shtylyov <[email protected]>
|
|
|
|
|
|
"down_write_trylock" needs to return 1 instead of 0 for success.
Otherwise copying a block with a read error (e.g. bit-flip on read)
won't work correctly.
Signed-off-by: Stefan Roese <[email protected]>
|
|
The patch adds setup to connect a CASIO COM57H5M10XRC
(640x480 TFT display) to the QONG module.
Signed-off-by: Stefano Babic <[email protected]>
|
|
This patch sets the SICRL_LBC bits in SICRL to change the function of the
associated pins to GPIO functionality.
Signed-off-by: Ron Madrid <[email protected]>
|
|
|
|
Add USB commands.
Rename autoscript to bootscript.
Add automatic bootscript image generation to makefile.
Signed-off-by: Andre Schwarz <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
|
|
Added UPM array table, upmconfig, and Local Bus configuration support for SIMPC8313
Signed-off-by: Ron Madrid <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
|
|
Only one file apparently defines this function, and it merely stubs
it out. So if no one is defining/calling it, punt it.
Signed-off-by: Mike Frysinger <[email protected]>
|
|
With the cpu include paths moved, the gitignore paths need updating.
Signed-off-by: Mike Frysinger <[email protected]>
Tested-by: Tom Rix <[email protected]>
|
|
Recent crc changes started using the "uint" type in headers that are used
on the build system. This subsequently broke mingw targets as they do not
provide such a type. So add this basic typedef to compiler.h so that we
do not have to worry about this breaking again in the future.
Signed-off-by: Mike Frysinger <[email protected]>
|
|
Add ECC support for DDR RAM for MV64360 on esd CPCI-CPU/750 board.
This patch also adds the "pldver" command to display the CPLD
revision.
Signed-off-by: Reinhard Arlt <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>
|
|
Signed-off-by: Graeme Russ <[email protected]>
|
|
Signed-off-by: Graeme Russ <[email protected]>
|
|
Signed-off-by: Graeme Russ <[email protected]>
|
|
The clock interupt has always been 1kHz as per timer_init() in
/arch/i386/cpu/sc520/sc520_timer.c
Signed-off-by: Graeme Russ <[email protected]>
|
|
Onboard AMD Flash chip does not support buffered writes
Signed-off-by: Graeme Russ <[email protected]>
|
|
Add support for newer (up to 2.6.33) kernels
Add zboot command which takes the address of a bzImage as its first
argument and (optionally) the size of the bzImage as the second argument
(the second argument is needed for older kernels which do not include
the bzImage size in the header)
Signed-off-by: Graeme Russ <[email protected]>
|
|
Signed-off-by: Graeme Russ <[email protected]>
|
|
Modify print_size() so that it can accept numbers larger than 4GB on 32-bit
systems.
Add support for display terabyte, petabyte, and exabyte sizes. Change the
output to use International Electrotechnical Commission binary prefix standard.
Signed-off-by: Timur Tabi <[email protected]>
|
|
The patch adds SPI devices to the mx51evk board.
The MC13892 chip (PMIC) is supported.
Signed-off-by: Stefano Babic <[email protected]>
|
|
The MC13892 is a Power Controller used with processors
of the family MX.51. The file adds definitions to be used to setup
the internal registers via SPI.
Signed-off-by: Stefano Babic <[email protected]>
|
|
Add support for the PMIC (MC13783) controller
and enables charging of the RTC battery.
Signed-off-by: Stefano Babic <[email protected]>
|
|
The RTC is part of the Freescale's PMIC controller.
Use general function to access to PMIC internal registers.
Signed-off-by: Stefano Babic <[email protected]>
Tested-by: Magnus Lilja <[email protected]>
|
|
The patch add supports for the Freescale's Power
Management Controller (known as Atlas) used together with i.MX31/51
processors. It was tested with a MC13783 (MX31) and
MC13892 (MX51).
Signed-off-by: Stefano Babic <[email protected]>
|
|
Signed-off-by: Magnus Lilja <[email protected]>
|
|
$ git grep CONFIG_COMMAND_HISTORY
CHANGELOG: CONFIG_COMMAND_HISTORY
include/configs/AP1000.h:#define CONFIG_COMMAND_HISTORY 1
include/configs/keymile-common.h:#define CONFIG_COMMAND_HISTORY 1
include/configs/manroland/common.h:#define CONFIG_COMMAND_HISTORY 1
$
Signed-off-by: Kim Phillips <[email protected]>
Acked-by: Heiko Schocher <[email protected]>
|
|
|
|
|
|
Add a new function to the eth_device struct for programming a network
controller's hardware address.
After all network devices have been initialized and the proper MAC address
for each has been determined, make a device driver call to program the
address into the device. Only device instances with valid unicast addresses
will be programmed.
Signed-off-by: Ben Warren <[email protected]>
Acked-by: Detlev Zundel <[email protected]>
Tested-by: Prafulla Wadaskar <[email protected]>
Tested-by: Heiko Schocher <[email protected]>
Tested-by: Thomas Chou <[email protected]>
|
|
This driver supports the Altera triple speeds 10/100/1000 ethernet
mac.
Signed-off-by: Thomas Chou <[email protected]>
Signed-off-by: Ben Warren <[email protected]>
|
|
This patch ports the opencore 10/100 ethernet mac driver ethoc.c
from linux kernel to u-boot.
Signed-off-by: Thomas Chou <[email protected]>
Signed-off-by: Ben Warren <[email protected]>
|
|
|
|
Signed-off-by: Asen Dimov <[email protected]>
|
|
The UBI/UBIFS support is added to the QONG module.
Signed-off-by: Stefano Babic <[email protected]>
|
|
The NAND device is connected to the FPGA of the QONG board
and not to the NFC controller. For this reason, the FPGA must
be set and initialized before accessing to the NAND itself.
Signed-off-by: Stefano Babic <[email protected]>
|
|
moved CONFIG_CMD_FAT to filesystem section
swapped CONFIG_CMD_NAND and CONFIG_CMD_MII so they are alpha correct
Signed-off-by: Frans Meulenbroeks <[email protected]>
|
|
This patch includes a few additional commands in the sheevaplug
version of u-boot:
- support for LONGHELP so you can get help messages
- auto completion and command editing
- ubi and mii support
- ext2 filesystem (convenient if you have an ext2 from which you want to boot)
- jffs2 and ubifs filesystems (if you want to use these in NAND)
This also makes it more similar to openrd client.
Side effect of this patch is that the code now needs 3 sectors i.s.o. 2
so an existing env is overwritten
Signed-off-by: Frans Meulenbroeks <[email protected]>
|
|
GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0
GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot
References:
http://www.globalscaletechnologies.com/t-guruplugdetails.aspx
http://plugcomputer.org
This patch is for GuruPlug Plus, but it supports Standard version
as well.
Signed-off-by: Siddarth Gore <[email protected]>
|
|
The lowlevel_init file contained some hard-coded values
to setup the RAM. These board related values are moved into
the board configuration file.
Signed-off-by: Stefano Babic <[email protected]>
|
|
This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND flash, FEC ethernet controller
integrated into i.MX27. As this port is based on
the imx27lite port, common config options are collected
in include/configs/imx27lite-common.h
Signed-off-by: Heiko Schocher <[email protected]>
|
|
Because of other s5p series SoC will use these serial functions,
modify function's name and structure's name.
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Signed-off-by: Asen Dimov <[email protected]>
|
|
Signed-off-by: Asen Dimov <[email protected]>
|
|
Signed-off-by: Asen Dimov <[email protected]>
|
