| Age | Commit message (Collapse) | Author |
|---|
|
Fix booting for wandboard
|
|
One of the SD-CARD slots on the Wandboard Quad B1 is MMC 2. Enable it as a
boot device.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
- DWC and i.MX6 fixes
|
|
- fix complation error for CONFIG_USB
- update RPi3 DTBs to v5.1-rc6 state
- add defconfig for RPi3 B+
- Fix BCM2835_MBOX_TAG_TEST_PIXEL_ORDER define
|
|
This uclass is intended for devices that do not need any features from the
uclass, including binding children.
This will typically be used by devices that are used to bind child devices
but do not use dm_scan_fdt_dev() to do it. That is for example the case of
several USB wrappers that have 2 child devices (1 for device and 1 for
host) but bind only one at a any given time.
Signed-off-by: Jean-Jacques Hiblot <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The raw u-boot.bin for tinker board has been about 450KB without
debug option, and 550KB with all debug on, and the default value is 200KB,
which is not enough for run raw u-boot.bin.
Signed-off-by: Kever Yang <[email protected]>
|
|
ConvertPointer() must be EFIAPI. The first parameter should be of type
efi_uint_t. Use the same parameter name as the UEFI specification.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
Fixes for 2019.07
- menlo board
- allow SDB on Sabre
- HAB for mx6sl
- apalis board
|
|
Default value (4000ms) of PHY_ANEG_TIMEOUT for Micrel KSZ9031 contoller
isn't sufficient to finish auto-negotiation, which sometimes leads to
timeout errors:
Apalis iMX6 # dhcp
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
Increase the auto-negotiation time-out to 15000ms.
Signed-off-by: Igor Opaniuk <[email protected]>
Reviewed-by: Philippe Schenker <[email protected]>
|
|
Enable DM Video support on iMX53 M53Menlo and fix minor details
to restore previous behavior of the system.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Stefano Babic <[email protected]>
|
|
Since the pico-pi uses the distroboot,
this commit remove the 'script' variable (cf boot_scripts).
Signed-off-by: Pierre-Jean Texier <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
Fix set_emmcargs wrapper, which prepares proper bootargs for booting
from eMMC.
Signed-off-by: Igor Opaniuk <[email protected]>
Reviewed-by: Philippe Schenker <[email protected]>
|
|
Add support for loading u-boot FIT images over the USB SDP protocol in
the SPL
Signed-off-by: Frieder Schrempf <[email protected]>
[Various build fixes]
Signed-off-by: Sjoerd Simons <[email protected]>
Tested-by: Fabio Estevam <[email protected]>
Tested-by: Lukasz Majewski <[email protected]>
|
|
Add SPL support for rk3328, default with of-platdata enabled.
Signed-off-by: Kever Yang <[email protected]>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/cb2b7a1bc75ebb116b1eb9b0ae0223e84d86fc4b with minor modifications]
Signed-off-by: Matwey V. Kornilov <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for v2019.07-rc5 (3)
This pull request provides error fixes for the graphical output protocol,
the text output protocol, and the extended text input protocol.
Setting the boot device for the bootefi command is now not only supported
by the 'load' command but also for the file system specific commands like
'fatload'.
|
|
IDE devices are no longer automatically probed by u-boot, so it should
be done by the distro boot command before attempting to boot from IDE
(just like scsi and nvme)
Signed-off-by: Joshua Watt <[email protected]>
|
|
Extra "not DM" controllers support is disabled.
u-boot BSP still good enough to upgrade and run images.
Signed-off-by: Oleksandr Zhadan <[email protected]>
Signed-off-by: Michael Durrant <[email protected]>
|
|
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.Reset() is a function and not a void *
pointer.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
- PCIe driver change to support DM model
- T2080QDS migrated to use PCIe DM model
|
|
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled.
Signed-off-by: Hou Zhiqiang <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
|
|
Use the Kconfig option to select the PCIe reset errata.
Signed-off-by: Hou Zhiqiang <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
|
|
- LS1046AFRWY support
- USB errata fix and secure boot defconfig support for LS1028A
- Enabled SDHC and SATA for LX2160
- LS1046A serdes fixes
- other minor fixes
|
|
LS1046AFRWY board supports LS1046A family SoCs. This patch
add base support for this board.
Board support's 4GB ddr memory, i2c, micro-click module,microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.
Signed-off-by: Camelia Groza <[email protected]>
Signed-off-by: Madalin Bucur <[email protected]>
Signed-off-by: Pankit Garg <[email protected]>
Signed-off-by: Pramod Kumar <[email protected]>
Signed-off-by: Rajesh Bhagat <[email protected]>
Signed-off-by: Vabhav Sharma <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
|
|
During SD boot, MC firmware and DPC are copied from SD card to DDR.
Size reserved between MC and DPC firmware on DDR is 1MB.
If the size of MC firmware(load address 0x80000000) is more than 1 MB
then part of MC firmware will be overwritten by DPC firmware (load
address 0x80100000).
Fix: Update the MC/DPL/DPC firmware's DDR address as per their
respective addresses in SD card.
Signed-off-by: Wasim Khan <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
|
|
During SD boot, MC firmware and DPC are copied from SD card to DDR.
Size reserved between MC and DPC firmware on DDR is 1MB.
If the size of MC firmware(load address 0x80000000) is more than 1 MB
then part of MC firmware will be overwritten by DPC firmware (load
address 0x80100000).
Fix: Update the MC/DPL/DPC firmware's DDR address as per their
respective addresses in SD card.
Signed-off-by: Wasim Khan <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
|
|
Add bootcmd for IFC NOR boot and SD boot.
Signed-off-by: Wasim Khan <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
|
|
Signed-off-by: Ashish Kumar <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
|
|
Signed-off-by: Pankit Garg <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
|
|
Add secure boot defconfig for ls1028aqds and ls1028ardb boards.
Signed-off-by: Yuantian Tang <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
|
|
Default environment variable is more complete. Also scans for efi
binaries for example.
Signed-off-by: Mian Yousaf Kaukab <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
|
|
- Drop zipitz2 board (Tom)
- Add DEPRECATED option (Tom)
- Mark legacy or non-dm drivers as DEPRECATED (Jagan)
|
|
- Assorted gadget fixes
|
|
Pull request for UEFI sub-system for v2019.07-rc5 (2)
This pull request provides bug fixes for the UEFI sub-system. The most
relevant one concerns the allocation of memory at address 0. It is
needed for booting Linux on several boards via bootefi, e.g. the Asus
TinkerBoard.
An undefined reference bug in disk/part.c related to a division is
resolved.
|
|
- More board removal
|
|
The setexpr shell command calls cmd_get_data_size() which is only built
when CMD_DATA_SIZE is defined. We need to define CMD_DATA_SIZE if
CONFIG_CMD_SETEXPR is selected or the build will fail if no other
command selecting this option is enabled.
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
In order to migrate this symbol to Kconfig introduce a new symbol to
guard it, CONFIG_SYS_CUSTOM_LDSCRIPT. When that is set we can then
provide the exact final location o the script.
Signed-off-by: Tom Rini <[email protected]>
|
|
A number of boards set CONFIG_SYS_LDSCRIPT and then end up using one of
the default searched LDSCRIPT paths. Remove these customizations.
Signed-off-by: Tom Rini <[email protected]>
|
|
The non-CONFIG_SPL_FRAMEWORK SPL used on some PowerPC platforms have a
choice between CONFIG_SPL_NAND_BOOT, CONFIG_SPL_MMC_BOOT and
CONFIG_SPL_SPI_BOOT. Migrate this to Kconfig
Signed-off-by: Tom Rini <[email protected]>
|
|
Convert CONFIG_TFTP_BLOCKSIZE to Kconfig, update defconfigs,
headers and whitelist.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Christian Gmeiner <[email protected]>
Cc: Joe Hershberger <[email protected]>
|
|
Convert CONFIG_IP_DEFRAG to Kconfig, update defconfigs, headers
and whitelist. This patch is a follow-up on a patch by Christian
Gmeiner with the added config/header/whitelist updates.
Signed-off-by: Marek Vasut <[email protected]>
Reported-by: Christian Gmeiner <[email protected]>
Cc: Joe Hershberger <[email protected]>
|
|
This variable is defined in UEFI specification 2.8, section 8.1.
Its value should be updated whenever we add any usable runtime services
function.
Currently we only support SetVirtualAddress() for all systems and
ResetSystem() for some.
Signed-off-by: AKASHI Takahiro <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Chris Brandt <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Yoshihiro Shimoda <[email protected]>
|
|
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Chris Brandt <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Yoshihiro Shimoda <[email protected]>
|
|
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Chris Brandt <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Yoshihiro Shimoda <[email protected]>
|
|
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Chris Brandt <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Yoshihiro Shimoda <[email protected]>
|
|
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Chris Brandt <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Yoshihiro Shimoda <[email protected]>
|
|
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Chris Brandt <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Yoshihiro Shimoda <[email protected]>
|
|
In fastboot_*_get_part_info() functions we can use stronger typing by
expecting const strings.
Signed-off-by: Sam Protsenko <[email protected]>
Reviewed-by: Lukasz Majewski <[email protected]>
Reviewed-by: Igor Opaniuk <[email protected]>
|
|
Now that various SPI related options depend on CONFIG_DEPRECATED, in
order for platforms to build out of the box they need to disable various
other options.
Cc: Albert ARIBAUD <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Fabio Estevam <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
Per discussion on the list, drop this board again.
Cc: Vasily Khoruzhick <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Vasily Khoruzhick <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
