summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2023-04-03Merge tag 'u-boot-imx-20230403' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-imx Fixes for 2023.04 ------------------ CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15831 - fix for imx8mn_bsh_smm_s2
2023-04-01efi_loader: correct shortening of device-pathsHeinrich Schuchardt
We use short device-paths in boot options so that a file on a block device can be found independent of the port into which the device is plugged. Usb() device-path nodes only contain port and interface information and therefore cannot identify a block device. UsbWwi() device-path nodes contain the serial number of USB devices. Signed-off-by: Heinrich Schuchardt <[email protected]>
2023-03-31configs: imx8mn_bsh_smm_s2: remove console from bootargsDario Binacchi
The Linux kernel device tree already specifies the device to be used for boot console output with a stdout-path property under /chosen. Commit 36b661dc919da ("Merge branch 'next'") re-added the console setting that commit bede82f750752 ("configs: imx8mn_bsh_smm_s2: remove console from bootargs") had previously removed. Fixes: 36b661dc919da ("Merge branch 'next'") Signed-off-by: Dario Binacchi <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-03-28cli: Correct handling of invalid escape sequences in cread_line()Simon Glass
The second call to cli_ch_process() is in the wrong place, meaning that the one of the characters of an invalid escape sequence is swallowed instead of being returned. Fix the bug and add a test to cover this. This behaviour matches that of the code before cli_getch() was introduced. This was verified on the commit before b08e9d4b66 i.e.: 7d850f85aad ("sandbox: Enable mmc command and legacy images") Signed-off-by: Simon Glass <[email protected]> Reported-by: Heinrich Schuchardt <[email protected]>
2023-03-27rockchip: rk3399: Drop altbootcmdTom Rini
The defined altbootcmd was specific to distro_bootcmd which is not longer in use on these platforms, so drop it. Tested-by: Jonas Karlman <[email protected]> Reviewed-by: Jonas Karlman <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2023-03-25efi_loader: support for Ctrl() device path nodeHeinrich Schuchardt
* Add the definitions for Ctrl() device path nodes. * Implement Ctrl() nodes in the device path to text protocol. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Ilias Apalodimas <[email protected]>
2023-03-22arm: total_compute: Remap console logsannsai01
Remapping console logs from soc uart2 (s1 terminal) to css non-secure (uart_ap terminal) Signed-off-by: Annam Sai Manisha <[email protected]>
2023-03-19rockchip: include: configs: Remove unused SDRAM_BANK_SIZEJonas Karlman
Remove unused SDRAM_BANK_SIZE define. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-03-19rockchip: include: configs: Remove dangling commentsJonas Karlman
This removes dangling comments that no longer serve a purpose and has been left after conversion of defines to Kconfig option. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-03-19rockchip: tinker-rk3288: Use common BOOT_TARGET_DEVICESJonas Karlman
Building U-Boot for Tinker Board with USB or NET Kconfig option disabled result in the following build error: In file included from include/configs/rk3288_common.h:29, from include/configs/tinker_rk3288.h:14, from include/config.h:3, from include/common.h:16, from env/common.c:10: include/config_distro_bootcmd.h:302:9: error: expected '}' before 'BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB' 302 | BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/config_distro_bootcmd.h:302:9: note: in definition of macro 'BOOTENV_DEV_NAME_USB' 302 | BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/configs/tinker_rk3288.h:21:9: note: in expansion of macro 'BOOTENV_DEV_NAME' 21 | func(USB, usb, 0) \ | ^~~~ include/config_distro_bootcmd.h:454:25: note: in expansion of macro 'BOOT_TARGET_DEVICES' 454 | "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0" | ^~~~~~~~~~~~~~~~~~~ include/config_distro_bootcmd.h:474:9: note: in expansion of macro 'BOOTENV_BOOT_TARGETS' 474 | BOOTENV_BOOT_TARGETS \ | ^~~~~~~~~~~~~~~~~~~~ include/configs/rk3288_common.h:40:9: note: in expansion of macro 'BOOTENV' 40 | BOOTENV | ^~~~~~~ include/env_default.h:122:9: note: in expansion of macro 'CFG_EXTRA_ENV_SETTINGS' 122 | CFG_EXTRA_ENV_SETTINGS | ^~~~~~~~~~~~~~~~~~~~~~ In file included from env/common.c:32: include/env_default.h:29:36: note: to match this '{' 29 | const char default_environment[] = { | ^ make[2]: *** [scripts/Makefile.build:256: env/common.o] Error 1 The BOOT_TARGET_DEVICES defined in rockchip-common.h include the same devices as defined in tinker_rk3288.h, remove the board specific one to fix building with USB or NET option disabled. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-03-15Merge branch 'master' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-coldfire
2023-03-15Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
Per Andre: [T]hese two patches containing just devicetree updates for Allwinner boards. I was still hoping for a review, since we cannot import the files from the Linux tree verbatim, but managed to write some filter script that convinced me that the changes are fine. The files are from Linux v6.2-rc2, but are identical to the v6.2 release.
2023-03-15board: amcore: fix config options namespaceAngelo Dureghello
Remove CONFIG_ namespace options from .h, moving them to defconfig, while changing non-defconfig options to CFG_ namespace. Signed-off-by: Angelo Durgehello <[email protected]>
2023-03-15m68k: rename CONFIG_MCFTMR to CFG_MCFTMRAngelo Dureghello
This is not a Kconfig option so changing to _CFG. Signed-off-by: Angelo Durgehello <[email protected]>
2023-03-15board: amcore: fix u-boot mtd partitionAngelo Dureghello
Signed-off-by: Angelo Dureghello <[email protected]>
2023-03-09test: Add ut_assert_nextline_empty() empty line helperMarek Vasut
Add helper macro to test for empty lines, which is an inobvious wrapper around ut_assert_nextline("%s", "") . Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-03-05sunxi: dts: arm: update devicetree files from Linux v6.2-rc2Andre Przywara
Sync the devicetree files from the Linux kernel repo, v6.2-rc2. This is covering the 32-bit SoCs, from arch/arm/boot/dts. This enables some new devices for the F1C100s family, though this is of little relevance to U-Boot itself. The H3 gains the "phys" property for the first USB controller, which prevents an error message when U-Boot's USB stack comes up, and allows using this port in host mode. As before, this omits the non-backwards compatible changes to the R_INTC controller, to remain compatible with older kernels. Signed-off-by: Andre Przywara <[email protected]>
2023-02-28board: rockchip: add Radxa ROCK5B Rk3588 boardEugen Hristev
ROCK 5B is a Rockchip RK3588 based SBC (Single Board Computer) by Radxa. There are tree variants depending on the DRAM size : 4G, 8G and 16G. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 4/8/16GB memory LPDDR4x Mali G610MC4 GPU MIPI CSI 2 multiple lanes connector eMMC module connector uSD slot (up to 128GB) 2x USB 2.0, 2x USB 3.0 2x HDMI output, 1x HDMI input Ethernet port 40-pin IO header including UART, SPI, I2C and 5V DC power in USB PD over USB Type-C Size: 85mm x 54mm Kernel commits: a1d3281450ab ("arm64: dts: rockchip: Add rock-5b board") 6fb13f888f2a ("arm64: dts: rockchip: Update sdhci alias for rock-5b") Signed-off-by: Eugen Hristev <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28rockchip: rk3568: Read cpuid from otpJonas Karlman
The cpuid on RK3568 is located at 0xa instead of 0x7 as all other SoCs. Add and use a CFG_CPUID_OFFSET to define this offset. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28board: rockchip: Add Edgeble Neural Compute Module 6Jagan Teki
Neural Compute Module 6(Neu2) is a 96boards SoM-CB compute module based on Rockchip RK3588 from Edgeble AI. General features: - Rockchip RK3588 - up to 32GB LPDDR4x - up to 128GB eMMC - 2x MIPI CSI2 FPC On module WiFi6/BT5 is available in the following Neu6 variants. Neural Compute Module 6(Neu6) IO board is an industrial form factor ready-to-use IO board from Edgeble AI. IO board offers plenty of peripherals and connectivity options and this patch enables basic eMMC and UART which is enough to successfully boot Linux. Neu6 needs to mount on top of this IO board in order to create a complete Edgeble Neural Compute Module 6(Neu6) IO platform. Boot log for the record, DDR Version V1.08 20220617 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0x6 CH0 RX Vref:31.7%, TX Vref:21.8%,21.8% CH1 RX Vref:30.7%, TX Vref:22.8%,23.8% CH2 RX Vref:30.7%, TX Vref:22.8%,22.8% CH3 RX Vref:30.7%, TX Vref:21.8%,21.8% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL 2023.01-00952-g1d1785a516-dirty (Jan 30 2023 - 19:53:55 +0530) Trying to boot from MMC1 INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-391-g856309329:derrick.huang NOTICE: BL31: Built : 14:15:50, Jul 18 2022 INFO: ext 32k is not valid INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9 U-Boot 2023.01-00952-g1d1785a516-dirty (Jan 30 2023 - 19:53:55 +0530) Model: Edgeble Neu6A IO Board DRAM: 7.5 GiB (effective 3.7 GiB) Core: 71 devices, 15 uclasses, devicetree: separate MMC: mmc@fe2c0000: 0 Loading Environment from nowhere... OK In: serial@feb50000 Out: serial@feb50000 Err: serial@feb50000 Model: Edgeble Neu6A IO Board Net: No ethernet found. Hit any key to stop autoboot: 0 => Add support for Edgeble Neu6 Model A IO Board. Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28arm: rockchip: Add RK3588 arch core supportJagan Teki
The Rockchip RK3588 is a ARM-based SoC with quad-core Cortex-A76 and quad-core Cortex-A55 including NEON and GPU, 6TOPS NPU, Mali-G610 MP4, HDMI Out, HDMI In, DP, eDP, MIPI DSI, MIPI CSI2, LPDDR4/4X/5, eMMC5.1, SD3.0/MMC4.5, USB OTG 3.0, Type-C, USB 2.0, PCIe 3.0, SATA 3, Ethernet, SDIO3.0 I2C, UART, SPI, GPIO and PWM. Add arch core support for it. Signed-off-by: Jagan Teki <[email protected]> Signed-off-by: Kever Yang <[email protected]>
2023-02-28dt-bindings: reset: add rk3588 reset definitionsJagan Teki
Add reset ID defines for rk3588. commit <0a8eb7dae617> ("dt-bindings: reset: add rk3588 reset definitions") Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28dt-bindings: power: Add power-domain header for rk3588Jagan Teki
Add power-domain header for RK3588 SoC from description in TRM. commit <67944950c2d0> ("dt-bindings: power: add power-domain header for rk3588") Signed-off-by: Finley Xiao <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28dt-bindings: clk: Add dt-binding header for RK3588Jagan Teki
Add the dt-bindings header for the Rockchip RK3588, that gets shared between the clock controller and the clock references in the dts. commit <f204a60e545c> ("dt-bindings: clock: add rk3588 clock definitions") Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28dt-bindings: rockchip: Sync rockchip, vop2.h from LinuxJagan Teki
Sync rockchip,vop2.h from linux-next, and the last commit is commit <604be85547ce> ("drm/rockchip: Add VOP2 driver") Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Jagan Teki <[email protected]>
2023-02-28include: rk3328: Add default env for compressed kernel imagesChristopher Obbard
Add default memory addresses for kernel_comp_addr_r and kernel_comp_size to enable booting from a compressed kernel image. This area is temporarily used to decompress the kernel image on-the-fly. Signed-off-by: Christopher Obbard <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-22socfpga: chameleonv3: Move environment to a text filePaweł Anikiel
Move the environment to an easily editable text file in the boot partition Signed-off-by: Paweł Anikiel <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-02-19efi_loader: Measure the loaded DTBEtienne Carriere
Measures the DTB passed to the EFI application upon new boolean config switch CONFIG_EFI_TCG2_PROTOCOL_MEASURE_DTB. For platforms where the content of the DTB passed to the OS can change across reboots, there is not point measuring it hence the config switch to allow platform to not embed this feature. Co-developed-by: Ilias Apalodimas <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]> Signed-off-by: Etienne Carriere <[email protected]> Tested-by: Ilias Apalodimas <[email protected]> Reviewed-by: Ilias Apalodimas <[email protected]>
2023-02-17riscv: Rename Andes cpu and board namesLeo Yu-Chi Liang
The current ae350-related defconfigs could also support newer Andes CPU IP, so modify the names of CPU from ax25 to andesv5, and board name from ax25-ae350 to ae350. Signed-off-by: Leo Yu-Chi Liang <[email protected]> Reviewed-by: Yu Chien Peter Lin <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2023-02-13arm: mvebu: Add support for Synology DS116 (Armada 385)Tony Dinh
Synology DS116 is a NAS based on Marvell Armada 385 SoC. Board Specification: - Marvel MV88F6820 Dual Core at 1.8GHz - 1 GiB DDR3 RAM - 8MB Macronix mx25l6405d SPI flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 1x SATA (6 Gbps) - 3x LED - PIC16F1829 (connected to uart1) - GPIO fan - serial console Note that this patch depends on the add-support for Thecus N2350 patch: https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/ Signed-off-by: Tony Dinh <[email protected]>
2023-02-13arm: mvebu: Add support for Thecus N2350 (Armada 385) boardTony Dinh
Thecus N2350 is a NAS based on Marvell Armada 385 SoC. Specification: - Processor: Marvel MV88F6820 Dual Core at 1GHz - 1 GiB DDR4 RAM - 4MB Macronix mx25l3205d SPI flash - 512MB Hynix H27U4G8F2DTR-BC NAND flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 2x SATA (hot swap slots) - 3x buttons - 10x LEDS - serial console Signed-off-by: Tony Dinh <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2023-02-12Merge tag 'clk-2023.04-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-clk Clock changes for 2023.04-rc1 This contains various fixes and small features. I've included a reset patch as well since it was in the same series as a clock patch.
2023-02-12Merge branch 'for-2023.04' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-mpc8xx - A fix for a long standing bug that has been exposed by commit 50128aeb0f8 ("cyclic: get rid of cyclic_init()") preventing 8xx boards from booting since u-boot 2023.01 - A GPIO driver for powerpc 8xx chip - Fixup for powerpc 8xx SPI driver - A new powerpc 8xx board - The two devices having that board.
2023-02-12reset: Allow reset_get_by_name() with NULL nameSamuel Holland
This allows devm_reset_control_get(dev, NULL) to work and get the first reset control, which is common in code ported from Linux. Signed-off-by: Samuel Holland <[email protected]> Reviewed-by: Simon Glass <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-12clk: Allow clk_get_by_name() with NULL nameSamuel Holland
This allows devm_clock_get(dev, NULL) to work and get the first clock, which is common in code ported from Linux. Signed-off-by: Samuel Holland <[email protected]> Reviewed-by: Sean Anderson <[email protected]> Reviewed-by: Simon Glass <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-11trace: Reduce the number of function sitesSimon Glass
Given that the compiler adds two function calls into each function, the current spacing is overkill. Drop it down to 16 bytes per function, which is still plenty. This saves some space in the trace buffer. Also move the calculation into a function, so it is common code. Add a check for gd->mon_len being unset, which breaks tracing. Signed-off-by: Simon Glass <[email protected]>
2023-02-11trace: Update the file headerSimon Glass
It seems better to put the TEXT_BASE value in the file header rather than in an entry record. While it is true that there is a separate base for pre-relocation, this can be handled by using offsets in the file. It is useful to have a version number in case we need to change the trace format again. Update the header to make these changes. Signed-off-by: Simon Glass <[email protected]>
2023-02-11timer: Tidy up use of notraceSimon Glass
Tracing is typically enabled by the time driver model starts up, so there is no point in adding a 'notrace' to the timer-init function. However, once the driver model timer is enabled, we do need to be able to access the timer's private data when reading the timer, so add it to the core function needed for that. Update the function's documentation while we are here. Signed-off-by: Simon Glass <[email protected]>
2023-02-11board: cssi: Add new board MCR3000_2GChristophe Leroy
This adds a new board from CS GROUP. The board is called MCR3000_2G, and has a CPU board called CMPC885. That CPU board is shared with another equipment that will be added in a later patch. That board stores Ethernet MAC addresses in an EEPROM which is accessed using SPI bus. This patch was originally written by Charles Frey who's email address is not valid anymore as he left the company. Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: FRANJOU Stephane <[email protected]>
2023-02-11board: MCR3000: Modernise the settings to properly work on lastest u-boot ↵Christophe Leroy
version Both U-boot and Linux kernel have grown over the last releases and don't fit anymore in the 2M EPROM of the board. So, rework the setup to allow storing the Linux kernel image on the UBIFS NAND Flash. Also add support to FIT images as this is what the Linux kernel look like nowadays. Also increase CFG_SYS_BOOTMAPSZ to 32Mbytes and define CONFIG_SYS_BOOTM_LEN with the same value, otherwise it defaults to 8M which is not sufficient anymore with nowadays Linux kernels. And set the netmask to 255.255.255.0 as a class C address is used. Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: FRANJOU Stephane <[email protected]>
2023-02-11board: MCR3000: Migrate to using CONFIG_EXTRA_ENV_TEXTChristophe Leroy
We can move all of the environment changes to come from CONFIG_EXTRA_ENV_TEXT. Suggested-by: Tom Rini <[email protected]> Signed-off-by: Christophe Leroy <[email protected]>
2023-02-10Merge tag 'efi-2023-04-rc2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2023-04-rc2 Documentation: * Provide page with links to talks on U-Boot UEFI: * Enable CTRL+S to save the boot order in eficonfig command * Run attribute check for QueryVariableInfo() only for the file store * Bug fixes Others: * Improve output formatting of the coninfo command # -----END PGP SIGNATURE----- # gpg: Signature made Fri 10 Feb 2023 12:15:45 PM EST # gpg: using RSA key 6DC4F9C71F29A6FA06B76D33C481DBBC2C051AC4 # gpg: Good signature from "Heinrich Schuchardt <[email protected]>" [unknown] # gpg: aka "[jpeg image of size 1389]" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6DC4 F9C7 1F29 A6FA 06B7 6D33 C481 DBBC 2C05 1AC4
2023-02-10board: MCR3000: Use lowercase filenamesChristophe Leroy
Rename MCR3000.* to mcr3000.* to be more in line with other boards. Signed-off-by: Christophe Leroy <[email protected]>
2023-02-10dm: button: add support for linux_code in button-gpio.c driverDzmitry Sankouski
Linux event code must be used in input devices, using buttons. Signed-off-by: Dzmitry Sankouski <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-02-10pinctrl-snapdragon: Get rid of custom drive-strength valuesSumit Garg
Use standard pinconf drive-strength values from Linux DT bindings rather than ones based on custom u-boot header. These changes are in direction to make u-boot DTs for Qcom SoCs to be compatible with standard Linux DT bindings. Also, add support for pinconf bias-pull-up. Signed-off-by: Sumit Garg <[email protected]>
2023-02-10env: Couple networking-related variable flags to CONFIG_NETJan Kiszka
Boards may set networking variables programmatically, thus may have CONFIG_NET on but CONFIG_CMD_NET off. The IOT2050 is an example. CC: Joe Hershberger <[email protected]> Signed-off-by: Jan Kiszka <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-02-10arm: bcm7xxx: Convert to DM_SERIALThomas Fitzsimmons
Remove ns16550 configuration from header files. Document DM_SERIAL-required prior stage device tree configuration.
2023-02-10Correct SPL use of TEESimon Glass
This converts 1 usage of this option to the non-SPL form, since there is no SPL_TEE defined in Kconfig Signed-off-by: Simon Glass <[email protected]>
2023-02-10Correct SPL use of TARGET_MX6UL_9X9_EVKSimon Glass
This converts 1 usage of this option to the non-SPL form, since there is no SPL_TARGET_MX6UL_9X9_EVK defined in Kconfig Signed-off-by: Simon Glass <[email protected]>
2023-02-10Correct SPL uses of SANDBOX_CLK_CCFSimon Glass
This converts 12 usages of this option to the non-SPL form, since there is no SPL_SANDBOX_CLK_CCF defined in Kconfig Signed-off-by: Simon Glass <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-11 18:53:47 +0000