| Age | Commit message (Collapse) | Author |
|---|
|
The current mechanism is unnecessarily complex. Simplify the whole mechanism
such that the entire fitImage is signed, IVT is placed at the end, followed
by CSF, and this entire bundle is also authenticated. This makes the signing
scripting far simpler.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The ubifsload command is truncating any address above 4GiB as it casts
this address to an u32, instead of using an unsigned long which most of
the other load commands do. Change this to an unsigned long to allow
loading into high memory for boards which use these areas.
Fixes the following error:
=> ubifsload 0x2100000000 /boot/Image.lzma
Loading file '/boot/Image.lzma' to addr 0x00000000...
Unhandled exception: Store/AMO access fault
Signed-off-by: Ben Dooks <[email protected]>
Signed-off-by: Ben Dooks <[email protected]>
|
|
Sync device tree with next-20230426
Signed-off-by: Peng Fan <[email protected]>
|
|
Drop unused macro
Signed-off-by: Peng Fan <[email protected]>
|
|
Since we might reuse some drivers for other platforms, while the drivers
have sci firmware api, so to avoid build failure add inline functions
Signed-off-by: Peng Fan <[email protected]>
|
|
Move imx8 sci header file to include/firmware/imx, then we could
use build macro to reuse some i.MX8 drivers for i.MX9, such as
drivers/cpu/imx8_cpu.c.
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Stefano Babic <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2023-07-rc3
Documentation:
* update the description of signature algorithms
UEFI:
* fix unaligned access to GUID in HII database protocol
* fix launching EFI binaries loaded via semihosting
* fix filling of file path in loaded image protocol for non-block devices
|
|
During refactor this seemed to have been missed.
Fixes: 65dbb128fb45 ("include: environment: ti: Use .env for environment variables")
Signed-off-by: Manorit Chawdhry <[email protected]>
|
|
scripts to be placed in
After converting my targets from CFG_EXTRA_ENV_SETTINGS to
CONFIG_EXTRA_ENV_TEXT as suggested by Tom, I discovered that
fw_setenv doesn't set the entire defaut environment anymore.
I tried to fix it with the below patch, but it fails qemu-x86 CI test,
see https://source.denx.de/u-boot/custodians/u-boot-mpc8xx/-/pipelines/16326
That's the only CI test that fails AFAICS.
Could you help with a solution ? This needs to be fixed.
Thanks
Christophe
---- >8 ----
From: Christophe Leroy <[email protected]>
Subject: [RFC PATCH] envtools: Fix default environment
After converting some targets from CFG_EXTRA_ENV_SETTINGS to
CONFIG_EXTRA_ENV_TEXT, default environment embedded in
fw_env tool missed all extra settings.
Commit 86b9c3e4e4 ("env: Allow U-Boot scripts to be placed in
a .env file") restricted the inclusion of the content of that
file to builds without USE_HOSTCC.
But as mentionned in commit 79fc0c5f49 ("tools/env: cross-compile
fw_printenv without setting HOSTCC"), HOSTCC and USE_HOSTCC are
kept for code re-use.
Remove the restricting so that settings included in a .env
file are also added to fw_env tool.
Fixes: 86b9c3e4e4 ("env: Allow U-Boot scripts to be placed in a .env file")
Signed-off-by: Christophe Leroy <[email protected]>
|
|
- cfi: respect reg address length (Nuno)
|
|
flash_get_size() will get the flash size from the device itself and go
through all erase regions to read protection status. However, the device
mappable region (eg: devicetree reg property) might be lower than the
device full size which means that the above cycle will result in a data
bus exception. This change fixes it by reading the 'addr_size' during
probe() and also use that as one possible upper limit.
Signed-off-by: Nuno Sá <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-sh
- R-Car RZN1 support
|
|
We use the terms 'distro' to mean extlinux but they are not really the
same. 'Distro' could refer to any method of booting a distribution,
whereas extlinux is a particular method.
Also we sometimes use syslinux, but it is better to use the same term in
all cases.
Rename distro to syslinux and also update bootstd uses of syslinux to use
extlinux instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
This should be declared in a header file so that type-checking works
correctly.
Add a single declaration to usb.h and remove the others.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
|
|
* When called from efi_dp_from_name() we miss to append the filename
for non-block devices.
* expand_media_path() could be simplified by using efi_dp_from_file to
prepend the device path of the boot device.
This can be avoided by passing a device path to efi_dp_from_file() instead
of a block device descriptor and a partition number.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Tom reports that when building with clang we see this warning:
field guid within 'struct efi_hii_keyboard_layout' is less aligned than 'efi_guid_t' and is usually due to 'struct efi_hii_keyboard_layout' being packed, which can lead to unaligned accesses [-Wunaligned-access]
This happens because 'struct efi_hii_keyboard_layout' is defined as
packed and thus has 1-byte alignment but efi_guid_t is a type that
requires greater alignment than that.
However the EFI spec describes the EFI_GUID as
"128-bit buffer containing a unique identifier value.
Unless otherwise specified"
So convert the efi_guid_t -> u8 b[16] here and skip the alignment
requirements. Since the struct is packed to begin with, it makes no
difference on the final memory layout.
Suggested-by: Heinrich Schuchardt <[email protected]>
Reported-by: Tom Rini <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Renesas RZ/N1 devices contain BootROM code that loads a custom SPKG
image from QSPI, NAND or USB DFU. Support this format in mkimage tool.
SPKGs can optionally be signed, however creation of signed SPKG is not
currently supported.
Example of how to use it:
tools/mkimage -n board/schneider/rzn1-snarc/spkgimage.cfg \
-T spkgimage -a 0x20040000 -e 0x20040000 \
-d u-boot.bin u-boot.bin.spkg
The config file (spkgimage.cfg in this example) contains additional
parameters such as NAND ECC settings.
Signed-off-by: Ralph Siemsen <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
Add support for Schneider Electric RZ/N1D and RZ/N1S boards, which
are based on the Reneasas RZ/N1 SoC devices.
The intention is to support both boards using a single defconfig, and to
handle the differences at runtime.
Signed-off-by: Ralph Siemsen <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
This is taken directly from Linux kernel 6.3
(commit 457391b0380335d5e9a5babdec90ac53928b23b4)
Signed-off-by: Ralph Siemsen <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
Driver for Cadence EDAC DDR controller, as found in the Renesas RZ/N1.
Signed-off-by: Ralph Siemsen <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
Pinctrl/pinconf driver for Renesas RZ/N1 (R906G032) SoC.
This is quite rudimentary right now, and only supports applying a
default pin configuration as specified by the device tree.
Signed-off-by: Ralph Siemsen <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
The original function was only called once, before relocation. The new
one is called again after relocation. This was not the intent of the
original call. Fix this by renaming and updating the calling logic.
With this, chromebook_link64 makes it through SPL.
Fixes: 7fe32b3442f0 ("event: Convert arch_cpu_init_dm() to use events")
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
At present any ACPI tables created by prior-stage firmware are ignored.
It is useful to be able to view these in U-Boot.
Pick this up from the sysinfo tables and display it with the cbsysinfo
command. This allows the 'acpi list' command to work when booting from
coreboot.
Adjust the global_data condition so that acpi_start is available even if
table-generation is disabled.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Tested-by: Bin Meng <[email protected]>
|
|
This is useful for other features. Move the function into library code
so it can be used outside just the 'acpi' command.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Tested-by: Bin Meng <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Rockchip NFC driver update and dev addr pointer api update;
- use standard dr_mode for usb driver;
- rock pi boards dts update;
- Add rk3566 Anbernic boards;
- Misc fixes for drivers;
|
|
Make tlv_eeprom command device selection an explicit parameter of all
function calls.
Signed-off-by: Josua Mayer <[email protected]>
Cc: Stefan Roese <[email protected]>
Cc: Baruch Siach <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-mpc8xx
This pull request adds misc fixes for cssi boards and activates
CPM relocation in order to enable the use of SCC4 in
QMC (QUICC Multi-Channel) mode.
|
|
The Anbernic RGxx3 is a "pseudo-device" that encompasses the following
devices:
- Anbernic RG353M
- Anbernic RG353P
- Anbernic RG353V
- Anbernic RG353VS
- Anbernic RG503
The rk3566-anbernic-rgxx3.dtsi is synced with upstream Linux, but
rk3566-anbernic-rgxx3.dts is a U-Boot specific devicetree that
is used for all RGxx3 devices.
Via the board.c file, the bootloader automatically sets the correct
fdtfile, board, and board_name environment variables so that the
correct devicetree can be passed to Linux. It is also possible to
simply hard-code a single devicetree in the boot.scr file and use
that to load Linux as well.
The common specifications for each device are:
- Rockchip RK3566 SoC
- 2 external SDMMC slots
- 1 USB-C host port, 1 USB-C peripheral port
- 1 mini-HDMI output
- MIPI-DSI based display panel
- ADC controlled joysticks with a GPIO mux
- GPIO buttons
- A PWM controlled vibrator
- An ADC controlled button
All of the common features are defined in the devicetree synced from
upstream Linux.
TODO: DSI panel auto-detection for the RG353 devices (requires porting
of DSI controller driver and DSI-DPHY driver to send DSI commands to
the panel).
Signed-off-by: Chris Morgan <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The DT specification supports CPUs with both 32-bit and 64-bit addressing
capabilities. In U-boot the fdt_addr_t and phys_addr_t size are coupled
by a typedef. The MTD NAND drivers for 32-bit CPU's can describe partitions
with a 64-bit reg property. These partitions synced from Linux end up with
the wrong offset and sizes when only the lower 32-bit is passed.
Decouple the fdt_addr_t and phys_addr_t size as they don't necessary
match.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add devfdt_get_addr_size_index_ptr function with the same
functionality as devfdt_get_addr_size_index, but instead
a return pointer is given.
Suggested-by: Michael Nazzareno Trimarchi <[email protected]>
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The fdt_addr_t and phys_addr_t size have been decoupled.
A 32bit CPU can expect 64-bit data from the device tree parser,
so convert regmap_init_mem_plat() input to handel both. The
syscon class driver also makes use of the regmap_init_mem_plat()
function, but has no way of knowing the format of the
device-specific platform data. In case of odd reg structures other
then that the syscon class driver assumes the regmap must be
filled in the individual syscon driver before pre-probe.
Also fix the ARRAY_SIZE divider in the syscon class driver.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
When fdt_addr_t and phys_addr_t are split it turns out that
the header don't match the functions, so fix the headers.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
In IPv6, the default gateway and prefix length are determined by receiving
a router advertisement as defined in -
https://www.rfc-editor.org/rfc/rfc4861.
Add support for sending router solicitation (RS) and processing router
advertisements (RA).
If the RA has prefix info option and following conditions are met, then
gatewayip6 and net_prefix_length of ip6addr env variables are initialized.
These are later consumed by IPv6 code for non-local destination IP.
- "Router Lifetime" != 0
- Prefix is NOT link-local prefix (0xfe80::/10)
- L flag is 1
- "Valid Lifetime" != 0
Timing Parameters:
- MAX_RTR_SOLICITATION_DELAY (0-1s)
- RTR_SOLICITATION_INTERVAL (4s) (min retransmit delay)
- MAX_RTR_SOLICITATIONS (3 RS transmissions)
The functionality is enabled by CONFIG_IPV6_ROUTER_DISCOVERY and invoked
automatically from net_init_loop().
Signed-off-by: Ehsan Mohandesi <[email protected]>
Tested-by: Viacheslav Mitrofanov <[email protected]>Reviewed-by:
Tested-by: Viacheslav Mitrofanov <[email protected]>
Reviewed-by: Viacheslav Mitrofanov <[email protected]>
Tested-by: Sergei Antonov <[email protected]>
Reviewed-by: Sergei Antonov <[email protected]>
|
|
Recent commit 75d28899e3e9 ("net: phy: Synchronize PHY interface modes
with Linux") reordered the enum definitions. This exposed a problem
in range checking functions to identify the interface type. Though
this specific api wasn't impacted (all the RGMII definitions remained
within range), this experience should be used to never to have to face
this kind of challenge again.
While it is possible for the phy drivers to use the enums directly,
drivers such as dp83867, dp83869, marvell, micrel_ksz90x1 etc use this
api.
Reported-by: Tom Rini <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
|
|
Recent commit 75d28899e3e9 ("net: phy: Synchronize PHY interface modes
with Linux") reordered the enum definitions. This caused the range of
enums that this api was checking to go bad.
There aren't anymore users of phy_interface_is_sgmii, so, just drop
it. Also the protocols are so very different that it makes no sense to
provide a helper wrapper in the hope of reuse for phy drivers.
Reported-by: Tom Rini <[email protected]>
Suggested-by: Marek Vasut <[email protected]>
Suggested-by: Marek Behún <[email protected]>
Link: https://lore.kernel.org/all/20230414103852.38705065@dellmb/
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
|
|
Introduce reboot, boot and continue commands support to
TCP fastboot by moving existing UDP logic into the common module.
Signed-off-by: Dmitrii Merkurev <[email protected]>
Cc: Ying-Chun Liu (PaulLiu) <[email protected]>
Cc: Simon Glass <[email protected]>
Сс: Joe Hershberger <[email protected]>
Сс: Ramon Fried <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Known limitations are
1. fastboot reboot doesn't work (answering OK but not rebooting)
2. flashing isn't supported (TCP transport only limitation)
The command syntax is
fastboot tcp
Signed-off-by: Dmitrii Merkurev <[email protected]>
Cc: Ying-Chun Liu (PaulLiu) <[email protected]>
Cc: Simon Glass <[email protected]>
Сс: Joe Hershberger <[email protected]>
Сс: Ramon Fried <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Make following changes to unblock TCP fastboot support:
1. Implement being a TCP server support
2. Introduce dedicated TCP traffic handler (get rid of UDP signature)
3. Ensure seq_num and ack_num are respected in net_send_tcp_packet
function (make sure existing wget_cmd code is reflected with the fix)
Signed-off-by: Dmitrii Merkurev <[email protected]>
Cc: Ying-Chun Liu (PaulLiu) <[email protected]>
Cc: Simon Glass <[email protected]>
Сс: Joe Hershberger <[email protected]>
Сс: Ramon Fried <[email protected]>
Reviewed-by: Ying-Chun Liu (PaulLiu) <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
|
|
Adds commands to support DHCP and PXE with IPv6.
New configs added:
- CMD_DHCP6
- DHCP6_PXE_CLIENTARCH
- DHCP6_PXE_DHCP_OPTION
- DHCP6_ENTERPRISE_ID
New commands added (when IPv6 is enabled):
- dhcp6
- pxe get -ipv6
- pxe boot -ipv6
Signed-off-by: Sean Edmond <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
|
|
Adds DHCPv6 protocol to u-boot.
Allows for address assignement with DHCPv6 4-message exchange
(SOLICIT->ADVERTISE->REQUEST->REPLY). Includes DHCPv6 options
required by RFC 8415. Also adds DHCPv6 options required
for PXE boot.
Possible enhancements:
- Duplicate address detection on DHCPv6 assigned address
- IPv6 address assignement through SLAAC
- Sending/parsing other DHCPv6 options (NTP, DNS, etc...)
Signed-off-by: Sean Edmond <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
|
|
Fix "setenv gatewayip6".
Synchronize IPv6 local variables with environment variables
in netboot_update_env()
Signed-off-by: Sean Edmond <[email protected]>
|
|
Export the ldpaa_eth_get_dpmac_id() function so that it can be used from
other drivers, especially by fsl-mc which will need it the next patch.
Also, create a macro for the Ethernet ldpaa driver name and export it as
well.
Signed-off-by: Ioana Ciornei <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-video
- enable video support in SPL
- support splash screen for TI am62x
- replace #ifdef and #if with if's in bmp/splash
- add lm3533 backlight driver
- add Solomon SSD2825 DSI/LVDS bridge driver
- add Renesas R61307 and R69328 MIPI DSI panel drivers
- add tegra DC based PWM backlight driver
- add generic endeavoru (HTC One X) panel driver
|
|
When OE is packaging a dtb file into the FIT image it names the node based
on the dtb filename. Node names can't have "/" so it is turned into "_".
We select our FIT config using the "fdtfile" env var so we don't duplicate
the board_name to fdt logic. Result is fdtfile needs mangled when used to
select a config node from OE made FIT image. Do this here.
Signed-off-by: Andrew Davis <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Using SMC relocation microcode patch or USB-SOF microcode patch
will disable DPRAM memory from 0x2000 to 0x2400 and from 0x2f00
to 0x3000.
At the time being, init RAM is setup to use 0x2800-0x2e00, but
the stack pointer goes beyond 0x2800 and even beyond 0x2400.
For the time being we are not going to use any microcode patch
that uses memory about 0x3000, so reorganise setup to use:
- 0x2800 - 0x2e00 for init malloc and global data and CPM buffers
- 0x3000 - 0x3c00 for init stack
For more details about CPM dual port ram, see
commit b1d62424cb ("powerpc: mpc8xx: redistribute data in CPM dpram")
Signed-off-by: Christophe Leroy <[email protected]>
|
|
Correct the function documentation.
Fixes: ca031c082700 ("dm: core: introduce uclass_get_device_by_of_path()")
Reported-by: Tom Rini <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
u-boot-imx-20230503
-------------------
- Fixes for : pico-imx6ul, smegw01
- new boards: DMSSE20, Reform 2
- fix: get_boot_device, PLL video rate
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16211
|
|
Button keyboard driver used to navigate bootmenu entries.
Add gpio buttons, button keyboard driver.
Add gpio keys dts bindings.
Signed-off-by: Dzmitry Sankouski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
board
A board with Hi3798MV200 SoC and various peripherals. Details are in the
board README.md.
Signed-off-by: Yang Xiwen <[email protected]>
|
|
These clocks are found on Hi3798MV200
Signed-off-by: Yang Xiwen <[email protected]>
|
