| Age | Commit message (Collapse) | Author |
|---|
|
mem map changes"
Janne Grunau <[email protected]> says:
The changes in "Make LMB memory map global and persistent" [1] break
mapping DMA memory in the USB xHCI driver when using the apple_dart
iommu present on Apple silicon systems.
The IOVA space used by the u-boot driver (low 4GB) and physical memory
do not overlap. The physical memory on this systems starts depending on
the SoC either at 0x10_0000_0000 or 0x100_0000_0000. It make no sense to
manage these distinct regions in a single LMB map. In addition every
device has its own iommu and IO address space so sharing a single memory
map between all iommu instances is not necessary.
To fix this issue restore the used subset (add, alloc and free) of the
previous pointer based LMB interface with "io_" as prefix.
To ensure that low level lmb functions do not use the global LMB
variable reorder lib/lmb.c so that the variable is not visible.
Tested with patches from my "Fix device removal order for Apple dart
iommu" series [2] to fix a separate issue.
The cosmetic commit has two checkpatch warnings in existing code which I
ignored.
[1] https://lore.kernel.org/u-boot/[email protected]/
[2] https://lore.kernel.org/u-boot/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Tom Rini <[email protected]>
|
|
These functions can be used with struct lmb pointers and will be used to
manage IOVA space in the apple_dart iommu driver. This restores part of
the pointer base struct lmb API from before commit ed17a33fed29 ("lmb:
make LMB memory map persistent and global").
io_lmb_add() and io_lmb_free() can trivially reuse exisiting lmb
functions. io_lmb_setup() is separate for unique error log messages.
io_lmb_alloc() is a simplified copy of _lmb_alloc_base() since the
later has unused features and internal use of the global LMB memory map.
Signed-off-by: Janne Grunau <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/23280
- Add board:
rk3328: FriendlyElec NanoPi R2S Plus
rk3568: Qnap TS433
rk3588: Cool Pi CM5 GenBook
- Move rk3399_force_power_on_reset to TPL for puma board;
|
|
Add support for Cool Pi GenBook, it works as a carrier board
connect with CM5 SOM.
Specification:
- Rockchip RK3588
- LPDDR5X 8/32 GB
- eMMC 64 GB
- HDMI Type A out x 1
- USB 3.0 Host x 1
- USB-C 3.0 with DisplayPort AltMode
- PCIE M.2 E Key for RTL8852BE Wireless connection
- PCIE M.2 M Key for NVME connection
- eDP panel with 1920x1080
Tested by Armbian boot on USB disk.
Change-Id: I4d9b8572dc7c400077dde666633f3fea1b47dd03
Signed-off-by: Andy Yan <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Some board may want to have a different boot priority(a laptop
may want to usb has the highest boot priority for third-part
os installation). So let the board can define it's own
boot_targets.
Signed-off-by: Andy Yan <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The Qnap TS433 is a 4-bay NAS based around the RK3568.
Two SATA bays are connected to the RK3568's own SATA controllers while
the other two are connected to a JMicron SATA controller living on the
PCIe bus.
It provides one 2.5Gb and one 1Gb ethernet port as well as 3 usb ports.
Signed-off-by: Heiko Stuebner <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
|
|
The 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
adds new SPI bus flags, but also introduces a completely new set of
SPI bus flags in another location. The existing flags field is type
u8, while the new separate flags are BIT(8) and higher. Use of those
new flags triggers integer overflow.
Drop the newly introduced flags which were never used anywhere in the
code. Move the one remaining flag which was used in the correct place
and change it from BIT(8) to BIT(6) so it fits the u8 flags.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Addresses-Coverity-ID: 510804 Extra high-order bits
Reported-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Venkatesh Yadav Abbarapu <[email protected]>
|
|
We are now using the dts/upstream subtree for the RZ/G2L SoC family so
we can drop unused dt-bindings headers.
Signed-off-by: Paul Barker <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/23262
- Improve imx9 boot medium autodection.
- Add possibility to skip DCD on i.MX8.
- Switch to using upstream DT on DH i.MX6 DHCOM.
- Add support for i.MX6DL DHCOM SoM on PDK2 carrier board.
- Handle FIELD_RETURN on i.MX HAB.
|
|
Currently U-Boot always adds DCD Image to boot container.
On imx8qxp SoC it is possible to init RAM from within SCFW,
and adding a DCD image type to the boot container in this case
breaks booting (No debug output anymore from SCFW! Nor any
output from SPL), so we need to configure a dcd skip somehow.
This patch adds a new imx8image_cmd entry CMD_DCD_SKIP and a
new entry in imximage.cfg "DCD_SKIP". If set to "true"
no DCD image type will be added to the container.
Signed-off-by: Heiko Schocher <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Improve "mmcautodetect=yes" boot mode autodetection to able to use it
if CONFIG_ENV_IS_NOWHERE=y is used for i.MX9 SoCs and i.MX93 EVK board.
If both CONFIG_ENV_IS_IN_MMC=y and CONFIG_ENV_IS_NOWHERE=y are in the
defconfig, CONFIG_ENV_IS_IN_MMC=y will be overiden default
CONFIG_ENV_IS_NOWHERE settings.
Goal is in this patch to able to use the boot mode autodetection
if defconfig use only CONFIG_ENV_IS_NOWHERE=y option
(without CONFIG_ENV_IS_IN_MMC) for any i.MX9 SoC.
Signed-off-by: Benjamin Szőke <[email protected]>
|
|
When the --native flag is given, pretend to be running the host
architecture rather than sandbox.
Allow the same control for PXE too.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move this function from the EFI bootmeth to the common efi_helper file.
No functional change is intended.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use a function to obtain the device EFI filename, so that we can control
how sandbox behaves.
Signed-off-by: Simon Glass <[email protected]>
|
|
All call sites are using size rather than end addresses,
so instead - as previously done - calculating an end address
everywhere, just modify the function to use size and internally
calculate the end address
Cc: Heinrich Schuchardt <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Patrick Wildt <[email protected]>
Signed-off-by: Moritz Fischer <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Record the last active menu item and check if it equals to the
current selected item before reprint.
Signed-off-by: Weijie Gao <[email protected]>
Reviewed-by: Daniel Golle <[email protected]>
Tested-by: Daniel Golle <[email protected]>
|
|
This patch adds a new callback named need_reprint for menu.
The need_reprint will be called before printing the menu. If the
callback exists and returns FALSE, menu printing will be canceled.
This is very useful if the menu was not changed. It can save time
for serial-based menu to handle more input data.
Signed-off-by: Weijie Gao <[email protected]>
Reviewed-by: Daniel Golle <[email protected]>
Tested-by: Daniel Golle <[email protected]>
|
|
Leo Yan <[email protected]> says:
This patch series is to refine the booting on Arm Total Compuate
platform.
It changes to use the info passed in DTB for initialization DRAM info,
and dynamically initializes the booting envoironment variables.
Another big change is to use an envoironment file for boot commands,
based on it, the series extends to support multiple block devices
(MMC and virtio). And the env file is extended for booting Debian.
The last commit is to update memory mapping info based on the DRAM info
passed via DT binding.
Link: https://lore.kernel.org/r/[email protected]
|
|
The boot command for Total Compute has many aspects and changes from time
to time. So move it to an .env file where it can be a proper script.
Signed-off-by: Boyan Karatotev <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
|
|
The whole DRAM bank is used for loading and U-boot can detect the
overlap between the kernel and initramfs. So it is safe to drop
bootm_size.
Signed-off-by: Boyan Karatotev <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
|
|
Initialize the environment variables 'fdt_addr_r' and 'kernel_addr_r'
during the misc init phase. The static configurations are not needed,
remove them.
Signed-off-by: Boyan Karatotev <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
|
|
On Total Compute, TF-A passes the info via DT binding for the hardware
description - includes the serial, memory, and arm_ffa nodes.
This commit initializes the fdt base address based on the passed the
register x1.
The similar implementation has already been done for the raspberry pi,
so borrow a lot of it.
Co-developed-by: Jackson Cooper-Driver <[email protected]>
Signed-off-by: Jackson Cooper-Driver <[email protected]>
Signed-off-by: Boyan Karatotev <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
|
|
Tests which create a new bloblist overwrite the existing one in sandbox.
Provide a flag for tests to declare this behaviour. Save and restore the
bloblist pointer so that other tests remain unaffected.
Note that when sandbox is running normally, the bloblist has been
relocated to high in memory. The existing bloblist tests create a new
bloblist low in memory, so they do not conflict.
Correct a build error on coreboot by using accessors for gd->bloblist:
Signed-off-by: Simon Glass <[email protected]>
|
|
In some core test code, no existing categories make sense. Add a new one
for testing.
Signed-off-by: Simon Glass <[email protected]>
|
|
Coreboot provides the CMOS layout in the tables it passes to U-Boot.
Use that to build an editor for the CMOS settings.
Signed-off-by: Simon Glass <[email protected]>
|
|
All the uclass functions for finding a device end up creating a uclass
if it doesn't exist. Add a function which instead returns NULL in this
case.
This is useful when in the 'unbind' path, since we don't want to undo
any unbinding which has already happened.
Signed-off-by: Simon Glass <[email protected]>
|
|
Unlike linked lists, it is inefficient to remove items from an alist,
particularly if it is large. If most items need to be removed, then the
time-complexity approaches O(n2).
Provide a way to do this efficiently, by working through the alist once
and copying elements down.
Signed-off-by: Simon Glass <[email protected]>
|
|
Sometimes it is useful to empty the list without de-allocating any of
the memory used, e.g. when the list will be re-populated immediately
afterwards.
Add a new function for this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add some macros which permit easy iteration through an alist, similar to
those provided by the 'list' implementation.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a new function which returns the next element after the one
provided, if it exists in the list.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a better description for this macro.
Signed-off-by: Simon Glass <[email protected]>
|
|
Comment this macro so that it is clear how to use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the function comment to note that this function can return NULL
if it runs out of memory.
Signed-off-by: Simon Glass <[email protected]>
|
|
Heinrich Schuchardt <[email protected]> says:
With this series opendir, readdir, closedir are implemented for ext4.
These functions are needed for the UEFI sub-system to interact with
the ext4 file system.
To reduce code growth the functions are reused to implement the ls
command for ext4.
A memory leak in ext4fs_exists is resolved.
ext4fs_iterate_dir is simplified by removing a redundant pointer copy.
Link: https://lore.kernel.org/r/[email protected]
|
|
For accessing directories from the EFI sub-system a file system must
implement opendir, readdir, closedir. Provide the missing implementation.
With this patch the eficonfig command can be used to define load options
for the ext4 file system.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
test"
Tom Rini <[email protected]> says:
In the patch series "spi-nor: Add parallel and stacked memories support"
a number of issues have since been raised about problems that now exist
on a large number of previously working platforms. Marek Vasut has gone
and identified a number of issues and this series is the starting point
of attempting to address them and fix the problems with previously
existing platforms.
Link: https://patchwork.ozlabs.org/project/uboot/list/?series=429932&state=*
Link: https://lore.kernel.org/r/[email protected]
|
|
The SPI_ADVANCE description does not explain what the switch does.
It does not have anything to do with any advanced functionality, it
only gates off support for stacked and parallel SPI NORs. Rename the
Kconfig symbol, update description, and move it right next to Xilinx
hardware as it seems to be specific to this hardware. Make sure the
symbol is also protected by if DM_SPI in Kconfig.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <[email protected]>
|
|
Provide Sphinx style documentation for struct ext2_inode.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
* Describe the fields of struct fs_dir_stream.
* Update fs_readdir() and fs_opendir() description.
* Fix Sphinx errors.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/23092
- Implement i.MX93 erratum fix on the dwc_eth_qos driver to fix RMII.
- Add support for Emcraft Systems NavQ+.
- Fix the size of IVT + CSF blob tacked on to u-boot.itb.
|
|
lmb_alloc_flags() & lmb_alloc_base_flags() are just a wrappers for
_lmb_alloc_base(). Since the only difference is the max address of the
allowed allocation which _lmb_alloc_base() already supports with the
LMB_ALLOC_ANYWHERE flag, remove one of them.
Keep the lmb_alloc_base_flags() which also prints an error on failures
and adjust efi_allocate_pages() to only use one of them.
While at it clean up the duplicate function description from the header
file.
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Due to the removal of weak functions in 7d6cee2cd0 ("cmd: cache: Remove
weak function"), U-Boot fails to compile after updating to v2024.10 for
mediatek target in OpenWrt with GCC-14 with error:
cmd/cache.c: In function 'do_dcache':
cmd/cache.c:57:25: error: implicit declaration of function
'noncached_set_region' [-Wimplicit-function-declaration]
Thus, provide a prototype in include/cpu_func.h to fix a build
error in cmd/cache.c, since related prototypes are also located there.
The issue occurred after the update of uboot-mediatek in OpenWrt to
v2024.10, in combination with GCC-14 toolchain. It was reported and
discussed in https://github.com/openwrt/openwrt/issues/16697, and
temporarily fixed with
https://github.com/openwrt/openwrt/commit/92ca322dd1f48158b8829fec59319a12e4ae4295.
Signed-off-by: Jonas Jelonek <[email protected]>
Link: https://github.com/openwrt/openwrt/issues/16697
Link: https://github.com/openwrt/openwrt/commit/92ca322dd1f48158b8829fec59319a12e4ae4295
Fixes: 7d6cee2cd0 ("cmd: cache: Remove weak function")
Signed-off-by: Tom Rini <[email protected]>
|
|
consistency
Currently, a number of generic cache related functions have their common
prototype declared in include/cpu_func.h. Move the current set of
noncached functions there as well to match.
Signed-off-by: Tom Rini <[email protected]>
|
|
The Emcraft Systems NavQ+ kit is a mobile robotics platform
based on NXP i.MX8 MPlus SoC.
The following interfaces and devices are enabled:
- eMMC
- Gigabit Ethernet (through eQOS interface)
- SD-Card
- UART console
The device tree file is taken from upstream Linux Kernel
through OF_UPSTREAM
Signed-off-by: Gilles Talis <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
|
|
fixes & cleanups"
Jan Kiszka <[email protected]> says:
This adds support for the new IOT2050 SM variant, introduces a sysinfo
driver which also permits SMBIOS support and switches the board to
OF_UPSTREAM. There are some further fixes for the boards included as well.
Not yet included is configuration support for DMA isolation via the PVU as
this depends on not yet merged DT bindings and another overlay.
[trini: This is just the first 10 patches in the series for now]
Link: https://lore.kernel.org/r/[email protected]
|
|
Due to new DDR size introduction, the current logic of determining the
DDR size is not able to get the correct size.
Instead, the DDR size is determined by the FSBL(SEBOOT) then passed to
u-boot through the scratchpad info.
The SEBoot version must be >= D/V01.04.01.02 to support this change.
Also now for some variants, the DDR size may > 2GB, so borrow some code
from the TI evm to iot2050 to support more than 2GB DDR.
Signed-off-by: Baocheng Su <[email protected]>
Signed-off-by: Jan Kiszka <[email protected]>
|
|
This prevented to set m2_manual_config - as evaluated by
m2_connector_setup - under strict configurations for secure boot.
Signed-off-by: Jan Kiszka <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
|
|
Renesas R-Car systems use mainline Linux DTs for U-Boot via OF_UPSTREAM,
which also includes headers from dts/upstream/include/dt-bindings/power .
Remove unused legacy DT header files from include/dt-bindings/power .
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
