| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Shaohui Xie <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>
|
|
The otc570 board support was broken. Within this opportunity, I completely
reworked the board files.
Signed-off-by: Daniel Gorsulowski <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Reinhard Meyer <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Signed-off-by: Andreas Bießmann <[email protected]>
|
|
Fix some missing declaration in header.
Signed-off-by: Macpaul Lin <[email protected]>
|
|
Add missing definitions in header file according to datasheet.
Signed-off-by: Macpaul Lin <[email protected]>
|
|
Un-nestted the register structure in ftsmc020.h
Signed-off-by: Macpaul Lin <[email protected]>
|
|
Support registers definitions of ftsdmc021 SDRAM controller.
Signed-off-by: Macpaul Lin <[email protected]>
|
|
ftahbc020s.h provides basic definitions of this controller
to help a SoC which use this AHB Controller could
do scalable software settings in lowlevel_init.S.
Signed-off-by: Macpaul Lin <[email protected]>
|
|
commit 25ddd1fb0a2281b182529afbc8fda5de2dc16d96 left remnants of
many comments about CONFIG_SYS_GBL_DATA_SIZE.
Signed-off-by: Michael Jones <[email protected]>
|
|
as checkpatch proposes to use strict_strtoul instead of
simple_strtoul, introduce it.
Ported this function from Linux 2.6.38 commit ID:
521cb40b0c44418a4fd36dc633f575813d59a43d
Signed-off-by: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Detlev Zundel <[email protected]>
cc: Valentin Longchamp <[email protected]>
cc: Holger Brunck <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
|
|
This is needed for the upcoming TFTP server implementation.
This also simplifies PingHandler() and fixes rxhand_f documentation.
Signed-off-by: Luca Ceresoli <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Acked-by: Detlev Zundel <[email protected]>
|
|
|
|
APM errata CHIP_21 for the 405EX/EXr (from the rev 1.09 document dated
4/27/11) states that rev D processors may wake up with the wrong feature
set. This patch implements the APM-proposed workaround.
To enable this patch for your board, add the appropriate define for your
CPU to your board header file. See kilauea.h for more information. The
following variants are supported:
#define CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY
#define CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY
#define CONFIG_SYS_4xx_CHIP_21_405EXr_NO_SECURITY
#define CONFIG_SYS_4xx_CHIP_21_405EXr_SECURITY
Please note that if you select the wrong define, your board will not
boot, and JTAG will be required to recover.
Tested on custom boards using:
CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY <[email protected]>
CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY <[email protected]>
Signed-off-by: Steve Falco <[email protected]>
Acked-by: Dirk Eibach <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>
|
|
Signed-off-by: Clint Adams <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Cc: Prafulla Wadaskar <[email protected]>
Cc: Julian Pidancet <[email protected]>
|
|
Though the OpenRD-Base only has one gigabit Ethernet port,
both the OpenRD-Client and OpenRD-Ultimate each have two.
On the Ultimate, the PHY addresses are consecutive, but
on the Client they are not.
(based on
<62a0952ce368acc725063a00a5ec680a639d6c27.1301040318.git.julian.pidancet@citrix.com>
<ad0a2dc1e422698b005d6f0ceb6dd6f75a87e00a.1301040318.git.julian.pidancet@citrix.com>
)
Signed-off-by: Clint Adams <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Cc: Prafulla Wadaskar <[email protected]>
Cc: Julian Pidancet <[email protected]>
|
|
Signed-off-by: Clint Adams <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Cc: Prafulla Wadaskar <[email protected]>
Cc: Julian Pidancet <[email protected]>
|
|
Signed-off-by: Clint Adams <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Cc: Prafulla Wadaskar <[email protected]>
Cc: Julian Pidancet <[email protected]>
|
|
The asm/arch/config.h header define CONFIG_NR_DRAM_BANKS_MAX, which is
needed to configure DRAM banks.
This patch move the asm/arch/config.h header inclusion above the DRAM
banks configuration.
Additionally this patch fix a typo.
Signed-off-by: Simon Guinot <[email protected]>
|
|
Signed-off-by: Fabio Estevam <[email protected]>
|
|
Collect all keymile specific common headers in include/configs/km.
Signed-off-by: Heiko Schocher <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Detlev Zundel <[email protected]>
cc: Prafulla Wadaskar <[email protected]>
cc: Kim Phillips <[email protected]>
cc: Holger Brunck <[email protected]>
|
|
Signed-off-by: Holger Brunck <[email protected]>
Acked-by: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Detlev Zundel <[email protected]>
cc: Valentin Longchamp <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
|
|
Signed-off-by: Holger Brunck <[email protected]>
Acked-by: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Detlev Zundel <[email protected]>
cc: Valentin Longchamp <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
|
|
The initial_boot_bank can be set when more than one application is
used in a bootpackage. But a value n <> 0 never led to booting from
bank n. Instead, bank 0 was booted. This patch fixes this.
Signed-off-by: Thomas Herzmann <[email protected]>
Signed-off-by: Holger Brunck <[email protected]>
Acked-by: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Detlev Zundel <[email protected]>
cc: Valentin Longchamp <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
|
|
commit 91a3c14c (ppc, mgcoge: add DIP switch detection)
introduces an compile error due to an missing define in the
mgcoge2ne.h. DIP switch detection is valid for both boards.
Signed-off-by: Holger Brunck <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Heiko Schocher <[email protected]>
|
|
On mgcoge3ne a new environment variable bobcatreset is used.
So this patch adds a possibility to add board specific
environment variables in general and this specific variable
for mgcoge3ne.
Signed-off-by: Holger Brunck <[email protected]>
Acked-by: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Detlev Zundel <[email protected]>
cc: Valentin Longchamp <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
|
|
Reserved bit was changed according to the processors manual.
Signed-off-by: Holger Brunck <[email protected]>
Acked-by: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Detlev Zundel <[email protected]>
cc: Valentin Longchamp <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
|
|
This patch adds support for the MPC8247 based board mgcoge3ne.
Additionaly mgcoge2ne board supprot was removed, because due
to the mgcoge3ne, this board is obsolete and not longer
maintained.
The board is similar to mgcoge. The difference is that
a NUMONYX flash is used and a different SDRAM (256MB).
Also introduce CONFIG_KM_82XX to collect ppc82xx common
settings and remove staticness from the common set_pin function.
Signed-off-by: Holger Brunck <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
Acked-by: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Detlev Zundel <[email protected]>
|
|
Introduce a struct for the BFTICU FPGA to increase the readability of
the code. And the define CONFIG_SYS_BFTICU_BASE was removed because
the CONFIG_SYS_FPGA_BASE is already the base value for BFTICU registers.
Signed-off-by: Andreas Huber <[email protected]>
Signed-off-by: Holger Brunck <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
Acked-by: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Detlev Zundel <[email protected]>
|
|
The changes introduced by commit 0abddf8 ``cmd_ide: enhance new
feature "CONFIG_IDE_AHB"'' caused compiler warnings like
cmd_ide.c: In function 'ide_init':
cmd_ide.c:716: warning: assignment from incompatible pointer type
Constify the respective function arguments to fix this.
Signed-off-by: Wolfgang Denk <[email protected]>
|
|
|
|
Although most IDE controller is designed to be connected to PCI bridge,
there are still some IDE controller support AHB interface for SoC design.
The driver implementation of these IDE-AHB controllers differ from other
IDE-PCI controller, some additional registers and commands access is required
during CMD/DATA I/O. Hence a configuration "CONFIG_IDE_AHB" in cmd_ide.c is
required to be defined to support these kinds of SoC controllers. Such as
Faraday's FTIDE020 series and Global Unichip's UINF-0301.
Signed-off-by: Macpaul Lin <[email protected]>
|
|
Signed-off-by: Holger Brunck <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Valentin Longchamp <[email protected]>
cc: Heiko Schocher <[email protected]>
|
|
In order to support boardId / hwkey lists, the u-boot default
environment has been updated: Added a script checkboardidlist
which checks the list of boardId / hwkey if the boadrId / hwkey
of the IVM is included in that list. This feature is used if you
got different HW variants but you only want to create one boot
package. E.g. supx5 board series.
Signed-off-by: Thomas Herzmann <[email protected]>
Signed-off-by: Holger Brunck <[email protected]>
cc: Valentin Longchamp <[email protected]>
cc: Heiko Schocher <[email protected]>
|
|
Add:
- introduce "bootrunner" environment variable
This allows to execute consecutive different commands
specified in the list "subbootcmd". If one command fails
the command serie will stop.
- introduce environment variable "develop", "ramfs" and "release"
Each variable is one way to boot our linux. "develop" is for
development purpose and boots the SW via NFS. "release" is for
booting the linux image from flash, "ramfs" allows to load an SW
image via tftp into ram and executes from there
- introduce "addmem" variable, this command adds the used memory
for linux to the bootargs
- introduce "addvar" variable, this command adress for the /var
directory to the kernel command line
- introduce "setramfspram" and "setrootfsaddr" these calculation
were done if "ramfs" was used (only for debugging)
- introduce "tftpramfs" used for "ramfs" to load the image into
RAM (only for debugging)
Remove unneeded stuff:
- CONFIG_IO_MUXING is obsolete for keymile boards
- CONFIG_KM_DEF_ENV_PRIVATE is also obsolete
- define CONFIG_SYS_TEXT_BASE in board configs only
Signed-off-by: Holger Brunck <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Prafulla Wadaskar <[email protected]>
cc: Valentin Longchamp <[email protected]>
cc: Heiko Schocher <[email protected]>
|
|
This patch adds last_stage_init to all keymile boards. And
in the last stage init some environment variables for u-boot
were set. Currently these are pnvramaddr, pram and var address.
Signed-off-by: Holger Brunck <[email protected]>
Signed-off-by: Heiko Schocher <[email protected]>
Acked-by: Kim Phillips <[email protected]>
cc: Valentin Longchamp <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Kim Phillips <[email protected]>
|
