summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2010-03-07Add support for Freescale MX25 SOCJohn Rigby
ARM926EJS core with MX31 peripherals. Signed-off-by: John Rigby <[email protected]> Earlier Version Signed-off-by: Wolfgang Denk <[email protected]> CC: Fred Fan <[email protected]> CC: Tom <[email protected]>
2010-03-07mxc_serial replace platform specific clockJohn Rigby
remove ifdef'd clock selection code from serial_mxc.c and replace with call to imx_get_uartclk Add definitions for imx_get_uartclk to imx31 and imx27 include files. This makes it easier to add new imx platforms. Signed-off-by: John Rigby <[email protected]>
2010-03-07Add initial support for Freescale mx51evk boardStefano Babic
The patch adds initial support for the Freescale mx51evk board. Network (FEC) and SD controller (fsl_esdhc) are supported. Signed-off-by: Stefano Babic <[email protected]> Signed-off-by: Fred Fan <[email protected]>
2010-03-07fsl_esdhc: add support for mx51 processorStefano Babic
The esdhc controller in the mx51 processor is quite the same as the one in some powerpc processors (MPC83xx, MPC85xx). This patches adapts the driver to support the arm mx51. Signed-off-by: Stefano Babic <[email protected]>
2010-03-07ARM: add accessors functionsStefano Babic
Some Freescale's processors of different architecture have the same peripheral (eSDHC controller in PowerPC and i.MX51). This patch adds accessors for the internal registers of the SOCs, as already implemented in the PowerPC architecture. Signed-off-by: Stefano Babic <[email protected]>
2010-03-07MMC: add weak function to detect MMC/SD cardStefano Babic
Most controllers can check if there is a card in the slot. However, they require pins that could be not available because required by other functions and the detection of a card must be performed in another way. This patch adds a weak function that a board can implement to add its internal custom way to check the presence of a MMC/SD card. Signed-off-by: Stefano Babic <[email protected]>
2010-03-07MX51: Add pin and multiplexer definitions.Stefano Babic
The patch add header files to support the pin multiplexer of the the Freescale i.MX51 processor. Signed-off-by: Stefano Babic <[email protected]> Signed-off-by: Fred Fan <[email protected]>
2010-03-07MX51: Add register definitionsStefano Babic
The patch add header files to support the Freescale i.MX51 processor, setting definitions for internal registers. Signed-off-by: Stefano Babic <[email protected]> Signed-off-by: Fred Fan <[email protected]>
2010-03-07MX51: Add initial support for the Freescale MX51Stefano Babic
The patch add initial support for the Freescale i.MX51 processor (family arm cortex_a8). Signed-off-by: Stefano Babic <[email protected]> Signed-off-by: Fred Fan <[email protected]>
2010-03-07ARM Update mach-typesTom Rix
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit aea187c46f7d03ce985e55eb1398d0776a15b928 Signed-off-by: Tom Rix <[email protected]>
2010-03-07ARM change name of defines for AT91 arm926ejsAchim Ehrlich
Configuration defines should be preceeded with CONFIG_SYS_. Renamed some at91 specific defines to conform to this naming convention: AT91_CPU_NAME to CONFIG_SYS_AT91_CPU_NAME AT91_MAIN_CLOCK to CONFIG_SYS_AT91_MAIN_CLOCK Signed-off-by: Achim Ehrlich <[email protected]>
2010-03-07VoiceBlue: limit line lenght to 80 charactersLadislav Michl
Reindent configuration header to limit line lenght to 80 characters by removing obvious and sometimes misleading comments. Signed-off-by: Ladislav Michl <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-03-07netstar.h: do not exceed 80 columnsLadislav Michl
Limit line length to 80 characters mostly by removing obvious and sometimes misleading comments. Fix indentation, too. Signed-off-by: Ladislav Michl <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-03-07da830evm: Add support for TI EMACNick Thompson
Adds support for ethernet networking on the da830evm platform. This platform uses an SoC EMAC interface and a 3 port ethernet switch as a PHY with an RMII interface. The PHY also has a i2c interface for configuring the switch functions. Signed-off-by: Nick Thompson <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-03-07NetStar: make mtdparts default ready for recent kernelsLadislav Michl
Recent kernels are using generic NAND and NOR drivers. Change default mtdparts to reflect it. Signed-off-by: Ladislav Michl <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-03-07NetStar: fix default environmentLadislav Michl
Correct switching partitions after upgrade and make it more readable. Signed-off-by: Ladislav Michl <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-03-04Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2010-03-04Merge branch 'next' of git://git.denx.de/u-boot-coldfireWolfgang Denk
2010-03-04Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk
2010-03-04add include/asm-m68k/unaligned.hWolfgang Wegner
lib_generic/zlib.c needs include/asm/unaligned.h since commit cd514aeb996e2f7aefbe1f78481965d9d074aed4, which broke compilation for Coldfire/M68K. This patch adds the missing header for these architectures. Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de>
2010-03-03sh: Add asm/unaligned.h and asm/unaligned-sh4a.h from Linux kernelNobuhiro Iwamatsu
zlib.c demands asm/unaligned.h. But, SH does not have these. This commit add asm/unaligned.h and asm/unaligned-sh4a.h from Linux kernel and modifyf for u-boot. Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
2010-03-02mpc83xx: vme8349: fix incorrect BR0_PRELIM port size commentKim Phillips
commit 98d92d8c9f4021629a45261ad5ec3f3595f3a27a "sbc8349: fix incorrect comment" missed this one. Signed-off-by: Kim Phillips <[email protected]>
2010-03-02ppc4xx: Corrected EBC register bit definitionsEugene O'Brien
Corrected the bit field positions of the external master priority low and the external master priority high values in the EBC configuration register. These bit field positions differ between PPC405 and PPC440 processors Signed-off-by: Eugene O'Brien <[email protected]> Signed-off-by: Stefan Roese <[email protected]>
2010-02-22mpc83xx: remove hardcoded network addresses from config filesKim Phillips
and avoid e.g., two identical boards from causing random networking conflicts when hooked up to the same network. Signed-off-by: Kim Phillips <[email protected]>
2010-02-12new board (eb_cpux9k2)Jens Scharsig
* new board (eb_cpux9k2) * support for EB+CPUx9K2 board by BuS Elektronik GmbH & Co. KG * select via make eb_cpux9k2_config * this also demonstrates, how to use boards with AT91RM9200 cpu in at91 arch tree Signed-off-by: Jens Scharsig <[email protected]>
2010-02-12new at91_emac network driver (NET_MULTI api)Jens Scharsig
* add's at91_emac (AT91RM9200) network driver (NET_MULTI api) * enable driver with CONFIG_DRIVER_AT91EMAC * generic PHY initialization * modify AT91RM9200 boards to use NET_MULTI driver * the drivers has been tested with LXT971 Phy and DM9161 Phy at MII and RMII interface Signed-off-by: Jens Scharsig <[email protected]>
2010-02-12prepare joining at91rm9200 into at91Jens Scharsig
* prepare joining at91 and at91rm9200 * add modified copy of soc files to cpu/arm920t/at91 to make possible to compile at91rm9200 boards in at91 tree instead of at91rm9200 * add header files with c structure defs for AT91 MC, ST and TC * the new cpu files are using at91 c structure soc access * please read README.soc-at91 for details Signed-off-by: Jens Scharsig <[email protected]>
2010-02-12update at91sam9263ek board to new SoC accessJens Scharsig
* convert at91sam9263ek board to use c stucture SoC access * change gpio access to at91_gpio syntax Signed-off-by: Jens Scharsig <[email protected]>
2010-02-12convert common files to new SoC accessJens Scharsig
* add's a warning to all files, which need update to new SoC access * convert common files in cpu/../at91 and a lot of drivers to use c stucture SoC access Signed-off-by: Jens Scharsig <[email protected]>
2010-02-12add a new AT91 GPIO driverJens Scharsig
* add a real AT91 GPIO driver instead of header inline code * resolve the mixing of port and pins * change board config files to use new driver * add macros to gpio to realize backward compatibility Signed-off-by: Jens Scharsig <[email protected]>
2010-02-12add c structures for SoC accessJens Scharsig
* add's c structures for SoC access to pheriperials head files Signed-off-by: Jens Scharsig <[email protected]>
2010-02-12add new CONFIG_AT91_LEGACYJens Scharsig
* add's the new temporary CONFIG_AT91_LEGACY to all board configs This will need for backward compatiblity, while change the SoC access to c structures. If CONFIG_AT91_LEGACY is defined, the deprecated SoC is used. Signed-off-by: Jens Scharsig <[email protected]>
2010-02-12DA830 EVM: Enable NAND support on Spectrum Digital EVMNick Thompson
The EVM UI extender card has a NAND device. This change will enable saveenv to work with NAND and Linux to be booted using: mtdparts default nboot kernel bootm Signed-off-by: Nick Thompson <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-02-12Davinci: Add EMIF-A macros for setting chip select parametersNick Thompson
The patch adds EMIF-A macros for setting chip select parameters Signed-off-by: Nick Thompson <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-02-12EP93xx: fix syscon_regs definitionAlessandro Rubini
The structure was missing a reserved entry (not listed in the manual, actually), so the last registers had a wrong offset. This prevented all swlocked registers to be modified as swlock is last in the structure. Signed-off-by: Alessandro Rubini <[email protected]>
2010-02-12ARM: Add support for EP93xx SoCsMatthias Kaehlcke
Add support for the Cirrus EP93xx platform Signed-off-by: Matthias Kaehlcke <[email protected]> Acked-by: Tom <[email protected]>
2010-02-12Add support for EDB93xx boardsMatthias Kaehlcke
Added support for the following EDB93xx boards: EDB9301 EDB9302 EDB9302A EDB9307 EDB9307A EDB93012 EDB9315 EDB9315A Signed-off-by: Matthias Kaehlcke <[email protected]>
2010-02-12NetStar: Disable CONFIG_CMD_JFFS2Ladislav Michl
This patch removes "CONFIG_CMD_JFFS" from the board config Signed-off-by: Ladislav Michl <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-02-12OMAP3 Move declaration of gpmc_cfg.Tom Rix
Every omap3 board config file declared the global variable gpmc_cfg. This changes moves the declaration to a better location in the arch dependent header file cpu.h. Signed-off-by: Tom Rix <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-02-12at91: Add esd gmbh OTC570 board supportDaniel Gorsulowski
This patch adds support for esd gmbh OTC570 board. The OTC570 is based on an Atmel AT91SAM9263 SoC. Signed-off-by: Daniel Gorsulowski <[email protected]>
2010-02-03musb: Add host support for DM365 EVMPrathap Srinivas
Add support for musb host on DM365 EVM. Signed-off-by: Prathap Srinivas <[email protected]>
2010-02-03Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2010-02-03Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2010-02-03Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk
2010-02-03ppc4xx: Remove unused feature from AR405 boardMatthias Fuchs
This patch fixes building for AR405 boards by remove an unused feature. Signed-off-by: Matthias Fuchs <[email protected]> Signed-off-by: Stefan Roese <[email protected]>
2010-02-03ppc4xx: Fix building of PMC440 boardMatthias Fuchs
Remove some unused features and default environment variable to shrink the PMC440 u-boot. Signed-off-by: Matthias Fuchs <[email protected]> Signed-off-by: Stefan Roese <[email protected]>
2010-01-31new at91_emac network driver (NET_MULTI api)Jens Scharsig
* add's at91_emac (AT91RM9200) network driver (NET_MULTI api) * enable driver with CONFIG_DRIVER_AT91EMAC * generic PHY initialization * modify AT91RM9200 boards to use NET_MULTI driver * the drivers has been tested with LXT971 Phy and DM9161 Phy at MII and RMII interface Signed-off-by: Jens Scharsig <[email protected]> Signed-off-by: Ben Warren <[email protected]>
2010-01-31Add EP93xx ethernet driverMatthias Kaehlcke
Added ethernet driver for EP93xx SoCs Signed-off-by: Matthias Kaehlcke <[email protected]> Signed-off-by: Ben Warren <[email protected]>
2010-01-3183xx, uec: split enet_interface in two variablesHeiko Schocher
There's no sensible reason to unite speed and interface type into one variable. So split this variable enet_interface into two vars: enet_interface_type, which hold the interface type and speed. Also: add the possibility for switching between 10 and 100 MBit interfaces on the fly, when running in FAST_ETH mode. Signed-off-by: Heiko Schocher <[email protected]> Signed-off-by: Ben Warren <[email protected]>
2010-01-31TI: DaVinci: Updating EMAC driver for DM365, DM646x and DA8XXNick Thompson
The EMAC IP on DM365, DM646x and DA830 is slightly different from that on DM644x. This change updates the DaVinci EMAC driver so that EMAC becomes operational on SOCs with EMAC v2. Signed-off-by: Nick Thompson <[email protected]> Signed-off-by: Ben Warren <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-19 11:02:56 +0000