summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2022-01-12mmc: fsl_esdhc_imx: replace most #ifdefs by IS_ENABLED()Sean Anderson
[ fsl_esdhc commit 52faec31827ec1a1837977e29c067424426634c5 ] Make the code cleaner and drop the old-style #ifdef constructs where it is possible. Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Sean Anderson <[email protected]>
2022-01-12mmc: fsl_esdhc_imx: fix voltage validationSean Anderson
[ fsl_esdhc commit 5b05fc0310cd933acf76ee661577c6b07a95e684 ] Voltage validation should be done by CMD8. Current comparison between mmc_cfg voltages and host voltage capabilities is meaningless. So drop current comparison and let voltage validation is through CMD8. Signed-off-by: Yangbo Lu <[email protected]> Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2022-01-10Merge branch 'next'Tom Rini
Signed-off-by: Tom Rini <[email protected]>
2022-01-09Merge tag 'u-boot-amlogic-20220107' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic into next - disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs - meson64_android: add board specific env settings, in order to support VIM3/L for android - add changes to support VIM3/L android boot by using meson64_android.h config
2022-01-08udoo: Adjust the SD card device numberingFabio Estevam
After the conversion to DM the SD card shows up as 'mmc 2' device. Adjust the 'mmcdev' and the distro command 'func' accordingly. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Peter Robinson <[email protected]>
2022-01-07udoo_neo: Enable support for USB and storagePeter Robinson
Enable support for USB and USB storage on the UDOO Neo. Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2022-01-07udoo_neo: Fixes for booting from the mSD cardPeter Robinson
This fixes booting from the mSD card from both SPL and when using it for the OS booting. It also cleans up a few mmc booting bits that are no longer needed. Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2022-01-07configs: prepare khadas-vim3{l}_ab_android for AOSP supportMattijs Korpershoek
In AOSP, both VIM3 and VIM3L have 2 bootloader flavors, depending on A/B enablement. For example, for vim3l, the naming is: - u-boot_kvim3l_noab.bin : legacy support - u-boot_kvim3l_ab.bin : A/B support Prepare a defconfig to support u-boot_kvim3_ab.bin and u-boot_kvim3l_ab.bin. This is identical to khadas-vim3{l}_ab_android but will be updated in the next commit. Also update partitioning tables for A/B support. Signed-off-by: Mattijs Korpershoek <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-01-07configs: add khadas-vim3{l}_android for AOSP supportMattijs Korpershoek
The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <[email protected]> Signed-off-by: Mattijs Korpershoek <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-01-07configs: meson64_android: add board specific env settingsMattijs Korpershoek
This allows us to define extra board variables, such as "board" and "board_name". Signed-off-by: Guillaume La Roque <[email protected]> Signed-off-by: Mattijs Korpershoek <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-01-04arm: apple: Remove CONFIG_SYS_SDRAM_BASEMark Kettenis
The memory layout is taken from the device tree passed to us by m1n1, so there is no need to define this. Signed-off-by: Mark Kettenis <[email protected]> Reviewed-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2022-01-04vexpress64: Enable VIRTIO_NET network driverPeter Hoyes
The SMSC driver is using the old driver model. Init the virtio system in vexpress64.c so that the network device is discovered. Signed-off-by: Peter Hoyes <[email protected]> Reviewed-by: Andre Przywara <[email protected]>
2022-01-04vexpress64: Clean up BASE_FVP boot configurationPeter Hoyes
Move env var address values to #defines so they can be reused elsewhere. Rename env var names to those recommended in the README and modify addresses to allow more space for the kernel. Fix issue where fdt is called with invalid arguments when booting without a ramdisk. Signed-off-by: Peter Hoyes <[email protected]> Reviewed-by: Andre Przywara <[email protected]>
2022-01-04vexpress64: Refactor header file to make it easier to add new FVPsPeter Hoyes
Rename from vexpress_aemv8a.h -> vepxress_aemv8.h as new FVPs may not be v8-A. No change in behavior. This is towards future work to enable support for the FVP_BaseR. Signed-off-by: Peter Hoyes <[email protected]> Reviewed-by: Andre Przywara <[email protected]>
2022-01-04board: stemmy: Increase boot image to 64 MBLinus Walleij
When using a recent kernel with a bunch of compiled-in stuff the kernel image easily becomes bigger than 8 MB yielding this error: Loading Kernel Image Image too large: increase CONFIG_SYS_BOOTM_LEN Must RESET board to recover Fix this by bumping to SZ_64MB. Cc: Stephan Gerhold <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Tom Rini <[email protected]> Reviewed-by: Stephan Gerhold <[email protected]>
2021-12-31Merge tag 'efi-next' of https://source.denx.de/u-boot/custodians/u-boot-efi ↵Tom Rini
into next Pull request of efi-next Documentation: * Add Sunxi board description UEFI: * Improvements to U-Boot running on top of UEFI
2021-12-31efi: Allow easy selection of serial-only operationSimon Glass
Add info about how to select vidconsole or serial. Also set up a demo boot command. Signed-off-by: Simon Glass <[email protected]>
2021-12-31efi: Mention that efi_info_get() is only used in the stubSimon Glass
This provides access to EFI tables after U-Boot has exited boot services. It is not needed in the app since boot services remain alive and we can just call them whenever needed. Add a comment to explain this. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-12-31efi: Share struct efi_priv between the app and stub codeSimon Glass
At present each of these has its own static variable and helper functions. Move them into a shared file. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-12-31efi: Fix ll_boot_init() operation with the appSimon Glass
This should return false when the EFI app is running, since UEFI has done the required low-level init. Fix it. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-12-31efi: Add comments to struct efi_privSimon Glass
This structure is uncommented. Fix it. Signed-off-by: Simon Glass <[email protected]>
2021-12-31efi: Drop device_path from struct efi_privSimon Glass
This is not used anywhere drop it. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-12-31efi: Locate all block devices in the appSimon Glass
When starting the app, locate all block devices and make them available to U-Boot. This allows listing partitions and accessing files in filesystems. EFI also has the concept of 'disks', meaning boot media. For now, this is not obviously useful in U-Boot, but add code to at least locate these. This can be expanded later as needed. We cannot use printf() in the early stub or app since it is not compiled in Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-12-31efi_loader: Don't limit the StMM buffer size explicitlyIlias Apalodimas
Currently we allow and explicitly check a single shared page with StandAloneMM. This is dictated by OP-TEE which runs the application. However there's no way for us dynamically discover the number of pages we are allowed to use. Since writing big EFI signature list variable requires more than a page, OP-TEE has bumped the number of shared pages to four. Let's remove our explicit check and allow the request to reach OP-TEE even if it's bigger than what it supports. There's no need to sanitize the number of pages internally. OP-TEE will fail if we try to write more than it's allowed. The error will just trigger later on, during the StMM access. While at it add an error message to help users figure out what failed. Signed-off-by: Ilias Apalodimas <[email protected]> Tested-by: Ying-Chun Liu (PaulLiu) <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]>
2021-12-31efi: fix typo in description of struct efi_entry_hdrHeinrich Schuchardt
Add missing colon. Signed-off-by: Heinrich Schuchardt <[email protected]>
2021-12-28Merge tag 'video-next-20211228' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-video into next - various fixes to the sandbox display support - support for showing a logo without splash screen config - support for BMP drawing to depths other than 16bpp - tests for the different types of supported BMP images - support showing a logo when running coreboot via qemu
2021-12-28Merge tag 'efi-2022-01-rc4-4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc4-4 UEFI: * allow for more than 16 KiB UEFI variable size when using StMM Others: * make watchdog sysreset compatible with separate poweroff driver * avoid OpenSSL deprecation warnings
2021-12-27Convert CONFIG_JFFS2_DEV et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_JFFS2_DEV CONFIG_JFFS2_LZO CONFIG_JFFS2_NAND CONFIG_JFFS2_PART_OFFSET CONFIG_JFFS2_PART_SIZE Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_KIRKWOOD_GPIO to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KIRKWOOD_GPIO Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_SYS_KWD_CONFIG to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_KWD_CONFIG Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_88F5182 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_88F5182 CONFIG_BOARD_IS_OPENRD_BASE CONFIG_BOARD_IS_OPENRD_CLIENT CONFIG_BOARD_IS_OPENRD_ULTIMATE CONFIG_D2NET_V2 CONFIG_FEROCEON CONFIG_FEROCEON_88FR131 CONFIG_INETSPACE_V2 CONFIG_KW88F6192 CONFIG_KW88F6281 CONFIG_KW88F6702 CONFIG_NET2BIG_V2 CONFIG_NETSPACE_LITE_V2 CONFIG_NETSPACE_MAX_V2 CONFIG_NETSPACE_MINI_V2 CONFIG_NETSPACE_V2 CONFIG_SHEEVA_88SV131 At this point mv-plug-common.h is now only an include of mv-common.h so remove that indirection. Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_CPU_FREQ_HZ to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CPU_FREQ_HZ Cc: Michal Simek <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_CPU_SH7751 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CPU_SH7751 Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_CPU_PXA27X to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CPU_PXA27X Signed-off-by: Tom Rini <[email protected]>
2021-12-27serial: arm_dcc: Use CONFIG_ARM64 not CONFIG_CPU_ARMV8Tom Rini
The only place we use CONFIG_CPU_ARMV8 was in the arm_dcc serial driver. Switch this to CONFIG_ARM64 today, and if in the future we need finer granularity tuning here, a new CONFIG_SERIAL option needs to be introduced. Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_SYS_I2C_EEPROM_ADDR_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_I2C_EEPROM_ADDR_LEN Signed-off-by: Tom Rini <[email protected]>
2021-12-27ppc: mpc83xx: Remove unused CONFIG symbolsTom Rini
Neither of these symbols are referenced anywhere else, so remove them. Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_83XX_PCICLK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_83XX_PCICLK Signed-off-by: Tom Rini <[email protected]>
2021-12-27Finish conversion of CONFIG_SYS_CLK_FREQ to KconfigTom Rini
In order to finish moving this symbol to Kconfig for all platforms, we need to do a few more things. First, for all platforms that define this to a function, introduce CONFIG_DYNAMIC_SYS_CLK_FREQ, similar to CONFIG_DYNAMIC_DDR_CLK_FREQ and populate clock_legacy.h. This entails also switching all users from CONFIG_SYS_CLK_FREQ to get_board_sys_clk() and updating a few preprocessor tests. With that done, all platforms that define a value here can be converted to Kconfig, and a fall-back of zero is sufficiently safe to use (and what is used today in cases where code may or may not have this available). Make sure that code which calls this function includes <clock_legacy.h> to get the prototype. Signed-off-by: Tom Rini <[email protected]>
2021-12-27CONFIG_SYS_CLK_FREQ: Consistently be static or get_board_sys_clk()Tom Rini
This CONFIG option is used in one of two ways. The first way is that it is defined to a static value, of an unsigned long size. The second way is that it is defined to something, typically a function, to determine this value at run time. However, in a few cases that function returns a static value. Change that to using the static value directly. In the case of using something at run time, convert everything to using a function of the same name and prototype. This will allow for further cleanups. Finally, we have a few cases where the function is just not used, so drop it. Signed-off-by: Tom Rini <[email protected]>
2021-12-27arm: s5pc1xx: Move CONFIG_SYS_CLK_FREQ_C1x0 out of CONFIG namespaceTom Rini
The values CONFIG_SYS_CLK_FREQ_C100 and CONFIG_SYS_CLK_FREQ_C110 are only used in one place and not changed by the board config file. Move these out of the CONFIG namespace and in to the CFG namespace. Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_ARCH_MAP_SYSMEM to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARCH_MAP_SYSMEM Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_SYS_NAND_U_BOOT_OFFS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_U_BOOT_OFFS Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_TPL_TEXT_BASE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TPL_TEXT_BASE Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_ZYNQMP_PSU_INIT_ENABLED to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ZYNQMP_PSU_INIT_ENABLED Signed-off-by: Tom Rini <[email protected]>
2021-12-27Finish conversion CONFIG_SYS_NAND_SELF_INIT to KconfigTom Rini
In order to finish this conversion we need to add a symbols for SPL_SYS_NAND_SELF_INIT and TPL_SYS_NAND_SELF_INIT as there are cases there where we need to, or need to not, use that framework as things stand. Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_TEGRA_NAND to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TEGRA_NAND Signed-off-by: Tom Rini <[email protected]>
2021-12-27Finish converting CONFIG_SYS_FSL_CLK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_CLK We move the exiting option to common/Kconfig near the other options to control the contents of board_init_f() and note that this is a legacy option. We further restrict this to where the call is going to be non-empty, for the SoCs that had only been using this for some MMC-related clocks. Signed-off-by: Tom Rini <[email protected]>
2021-12-27warp7, pic32mzdask: Remove SYS_FDT_ADDR/SYS_ENV_ADDR from CONFIG namespaceTom Rini
In the case of CONFIG_SYS_FDT_ADDR this was being used to modify the default value of fdt_addr / fdt_addr_r, which is not something to expose in this manner and is not otherwise done. The case of SYS_ENV_ADDR is similar but only done on the pic32mzdask platform, for scriptaddr. Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_SYS_PCI_64BIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PCI_64BIT Signed-off-by: Tom Rini <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-30 03:51:04 +0000