| Age | Commit message (Collapse) | Author |
|---|
|
Heinrich Schuchardt <[email protected]> says:
Introduce a new function to update ACPI table headers.
This allows to simplify the existing code.
Link: https://lore.kernel.org/r/[email protected]
|
|
Introduce a new function to update ACPI table headers.
This allows to simplify the existing code.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Note that this undoes the changes of commit cf6d4535cc4c ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
|
|
in extlinux / PXE""
This reverts commit 8bc3542384e3a1219e5ffb62b79d16dddc1b1fb9, reversing
changes made to 698edd63eca090a2e299cd3facf90a0b97bed677.
There are still problems with this series to work out.
Link: https://lore.kernel.org/u-boot/CAFLszTjw_MJbK9tpzVYi3XKGazcv55auBAdgVzcAVUta7dRqcg@mail.gmail.com/
Signed-off-by: Tom Rini <[email protected]>
|
|
This change aligns the preprocessor directive with the standard
configuration flag used for detecting 64-bit x86 architecture.
Signed-off-by: Jeremy Compostella <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Harsha Vardhan V M <[email protected]> says:
This patch series introduces the fuse writebuff sub-system command and
makes improvements to the existing fuse implementation by removing the
custom string functions. The patches are required to be applied in
sequence.
The series consists of the following changes:
Patch 1 removes custom string functions and replaces them with standard
string functions.
Patch 2 introduces fuse.rst documentation for fuse commands.
Patch 3 introduces the fuse writebuff sub-system command, allowing to
write a structured buffer in memory to fuses, and implementing the
necessary function calls.
Patch 4 enables the fuse sub-system in the K3 platform.
Patch 5 updates the fuse.rst documentation to include details about the
new fuse writebuff command.
These changes aim to improve the fuse sub-system by the removal of
custom string functions and the addition of the fuse writebuff
command improves fuse programming workflows by allowing to write a
structured buffer in memory to efuses.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add CMD_FUSE_WRITEBUFF config option to add and enable fuse writebuff
sub-system command. Add fuse_writebuff function to be invoked on
writebuff command.
Signed-off-by: Harsha Vardhan V M <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
empty/full"
Simon Glass <[email protected]> says:
The membuff implementation curently has no tests. It also assumes that
head and tail can never correspond unless the buffer is empty.
This series provides a compile-time flag to support a 'full' flag. It
also adds some tests of the main routines.
The data structure is also renamed to membuf which fits better with
U-Boot.
There may be some cases in the code which could be optimised a little,
but the implementation is functional.
Link: https://lore.kernel.org/r/[email protected]
|
|
Show the start in end in the comment. Comment a missing variable in
membuf_readline() and fix its line length.
Signed-off-by: Simon Glass <[email protected]>
|
|
This uses a bool type so include the required header.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rename the struct to match the function prefix and filenames.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rename the C and header files to use the membuf basename, to match the
functions.
Add a MAINTAINERS entry while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
The double 'f' is not necessary and is a bit annoying as elsewhere in
U-Boot we use 'buf'. Rename all the functions before it is used more
widely.
Signed-off-by: Simon Glass <[email protected]>
|
|
If only a single label is provided in the list, bootdev_next_label()
does not operate correctly and reads beyond the end of the pointer list.
Fix this by adding a new check. Also add a note to convert this array
to an alist
Signed-off-by: Simon Glass <[email protected]>
|
|
Any 'bootable' flag in a DOS partition causes boostd to only scan
bootable partitions for that media. This can mean that extlinux.conf
files on the root disk are missed.
Put this logic behind a flag and update the documentation.
For now, the flag is enabled, to preserve the existing behaviour of
bootstd which is to ignore non-bootable partitions so long as there is
at least one bootable partition on the disk. Future work may provide a
command (or some other mechanism) to control this.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present the size of this struct is too large on 64-bit machines.
Annotate it with __packed to fix this.
Signed-off-by: Simon Glass <[email protected]>
|
|
This should say 'cast', not 'case', so fix it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Marek Vasut <[email protected]> says:
Import exfat-fuse libexfat, add U-Boot filesystem layer porting glue
code and wire exfat support into generic filesystem support code. This
adds exfat support to U-Boot.
Fill in generic filesystem interface for mkdir and rm commands.
Make filesystem tests test the generic interface as well as exfat,
to make sure this code does not fall apart.
Link: https://github.com/relan/exfat/commits/0b41c6d3560d ("CI: bump FreeBSD to 13.1.")
Link: https://lore.kernel.org/r/[email protected]
|
|
Add U-Boot adjustments to the libexfat code and integrate
the result into U-Boot filesystem layer. This provides full
read-write exfat support for U-Boot available via generic
filesystem interface.
FS_DIRENT_NAME_LEN is increased to 1024 in case exfat is
enabled, because EXFAT can use UTF16 names, which do not
fit into current FS_DIRENT_NAME_LEN. To avoid affecting
every configuration, increase FS_DIRENT_NAME_LEN only in
case EXFAT is enabled.
Example usage via sandbox, assuming disk.img with one exfat partition:
Drive info:
$ ./u-boot -Tc 'host bind 0 ../disk.img ; host info 0'
dev blocks blksz label path
0 262144 512 0 ../disk.img
List files:
$ ./u-boot -Tc 'host bind 0 ../disk.img ; ls host 0:1 /api'
475 Kconfig
230 Makefile
1873 README
...
10 file(s), 0 dir(s)
Load and checksum a file:
$ ./u-boot -Tc 'host bind 0 ../disk.img ; load host 0:1 $loadaddr .config ; \
crc32 $loadaddr $filesize'
56724 bytes read in 1 ms (54.1 MiB/s)
crc32 for 00000000 ... 0000dd93 ==> b2e847c9
$ crc32 .config
b2e847c9
Load .config file to RAM, store the file into FS as /newconfig,
load the /newconfig into RAM and checksum the file:
$ ./u-boot -Tc 'host bind 0 ../disk.img ; load host 0:1 $loadaddr .config ; \
save host 0:1 $loadaddr /newconfig $filesize ; \
load host 0:1 0x10000 /newconfig ; \
crc32 0x10000 $filesize'
56724 bytes read in 1 ms (54.1 MiB/s)
56724 bytes written in 0 ms
56724 bytes read in 0 ms
crc32 for 00010000 ... 0001dd93 ==> b2e847c9
Remove file 3.txt and create new directory /newdir:
$ ./u-boot -Tc 'host bind 0 ../disk.img ; ls host 0:1 / ; \
rm host 0:1 3.txt ; mkdir host 0:1 /newdir ; \
ls host 0:1 /'
...
0 1.txt
0 2.txt
0 3.txt
0 4.txt
0 5.txt
7 file(s), 4 dir(s)
...
0 1.txt
0 2.txt
newdir/
0 4.txt
0 5.txt
6 file(s), 5 dir(s)
Acked-by: Tom Rini <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add generic implementation of write into a block device to be used
by filesystem implementations. This is a pair function for already
existing fs_devread().
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add generic implementation of struct stat {} imported from Linux 6.13.y
commit 27560b371ab8 ("fs: pack struct kstat better"). This can be used
by filesystem code imported from elsewhere. Now struct stat {} becomes
available on all supported architectures.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Christian Marangi <[email protected]> says:
This little series adds initial support for Airoha AN7581 SoC.
With the help of some backport patch, this use OF_UPSTREAM
directly.
Posting this to have the targer and the very basic driver.
Ethernet, SNAND and eMMC support is already ready downstream
and will be posted shortly after this gets approved.
Having the first driver ready permits to separately push
dedicate series for SNAND, eMMC and Ethrnet as they all depends
on basic support of clock and reset and nothing else.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add initial support for Airoha AN7581 SoC. This adds the initial Kconfig
and Makefile entry for the SoC, an U-Boot specific DTSI and initial config
for it. Also add the initial code for CPU and RAM initialization.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Commit 1d5d292b7941 ("net: split net into net{,-common,-legacy,-lwip}")
inadvertendly left a commented out declaration for do_wget() in
net-common.h. Remove it.
Signed-off-by: Jerome Forissier <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
CFG_SYS_SPI_* are used in falcon boot to specify the offsets and size of
the respective payloads. This patch moves them to Kconfig keeping the
values consistent for each of the affected boards.
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Anshul Dalal <[email protected]>
|
|
Caleb Connolly <[email protected]> says:
In Simon's series reworking autoprobe, a discussion came up about
DM_FLAG_PROBE_AFTER_BIND, specifically that it wasn't very clear where
this flag should be used.
This series implements my suggestions made there to clarify the use of
this flag, and fixup the two driver which erroneously apply it to their
driver struct (this does nothing).
Link: https://lore.kernel.org/u-boot/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
|
|
The DM_FLAG_PROBE_AFTER_BIND flag only makes sense on a per-device
basis, however recently added documentation as well as some confused
drivers imply that it might be added to a driver definition, this does
nothing.
Clarify the new documentation and expand on the comment by the
definition to point people in the right direction.
Signed-off-by: Caleb Connolly <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Acked-by: Michal Simek <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tegra into next
- More Tegra video improvements
|
|
The EFI HTTP boot puts the ISO installer image at some location in
memory. Information about this image has to be passed on to the OS
kernel, which is done by adding a persistent memory(pmem) node to the
devicetree(DT) that is passed to the OS. The OS kernel then gets
information about the presence of this ISO image and proceeds with the
installation.
In U-Boot, this ISO image gets mounted as a memory mapped blkmap
device slice, with the 'preserve' attribute. Add a helper function
which iterates through all such slices, and invokes a callback. The
callback adds the pmem node to the DT and removes the corresponding
memory region from the EFI memory map. Invoke this helper function as
part of the DT fixup which happens before booting the OS.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Tobias Waldekranz <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Some blkmap memory mapped devices might have to be relevant even
after U-Boot passes control to the next image as part of the platform
boot. An example of such a mapping would be an OS installer ISO image,
information for which has to be provided to the OS kernel. Use the
'preserve' attribute for such mappings. The code for adding a pmem
node to the device-tree then checks if this attribute is set, and adds
a node only for mappings which have this attribute.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Tobias Waldekranz <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
With upcoming changes supporting pmem nodes, we need to remove the
pmem area from the EFI memory map. Rename efi_add_memory_map_pg() to
efi_update_memory_map(), and allow removing memory from the EFI memory
map.
Signed-off-by: Sughosh Ganu <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
One of the problems an OS may face, when running in EFI, is that
a mounted ISO, after calling ExitBootServices goes away, if that ISO
is resident in RAM memory as a ramdisk.
ACPI has NFIT and NVDIMM support to provide ramdisks to the OS, but we
don't have anything in place for DTs. Linux and device trees have support
for persistent memory devices. So add a function that can inject a pmem
node in a DT, so we can pass information on the ramdisk the OS.
Signed-off-by: Masahisa Kojima <[email protected]>
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/25324
- Imply the i.MX thermal driver by default on imx8, imx9, imx8m.
- Add clk_resolve_parent_clk() and fix up iMX clock drivers.
|
|
into next
CI: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/25323
- board: k1: Add reset driver
- board: starfive: Simplify binman config
- Some modifications on DTS and configs
|
|
Add dt-binding for reset driver.
Signed-off-by: Huan Zhou <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Remove CFG_SYS_SDRAM_BASE so that we can get DRAM base
from dt instead of compile time config.
Removing this config helps the u-boot more portable.
Signed-off-by: Jimmy Ho <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Prepare v2025.04-rc5
|
|
Ben reports a failure to boot the kernel on hardware that starts its
physical memory from 0x0.
The reason is that lmb_alloc_addr(), which is supposed to reserve a
specific address, takes the address as the first argument, but then also
returns the address for success or failure and treats 0 as a failure.
Since we already know the address change the prototype to return an int.
Reported-by: Ben Schneider <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
Tested-by: Ben Schneider <[email protected]>
Reviewed-by: Sughosh Ganu <[email protected]>
|
|
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-fixed-factor registration.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-divider clock registration.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-composite registration.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-gate registration.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-mux registration.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add clk_resolve_parent_clk() to resolve parent clock udevice name
based on clock-names DT property. This is used in SoC clock drivers
to look up the clock name in clock tables, which matches a clock
name in DT clock-names property, and convert it into udevice name
which is used by U-Boot clock framework to look up parent clock in
e.g. clk_register() using uclass_get_device_by_name(UCLASS_CLK,
parent_name, &parent);
Signed-off-by: Marek Vasut <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/25267
- Allow the registration and enablement of the i.MX UART clocks via DM,
without the need of manually calling init_uart_clk().
- Remove duplicated 'mmc dev ${mmcdev}' commands.
- Rework some of the RAM related Kconfig symbols for phycore_imx8mp.
|
|
Depending on the platform, there may be multiple clock sources
required to enable a UART. Use the bulk functions to get and
enable the clocks when the UART probes. This can facilitate
the removal of functions to manually enable the clock.
This is made dependent on CLK_CCF which is used on imx6q,
imx8m[mnqp], several imxrt, imx9. If/when the UART clock
registration is done for older boards, this limitation
could be updated.
Signed-off-by: Adam Ford <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
The Ouya microconsole is build on Nvidia Tegra 3 (T33) SoC, featuring a
quad-core 1.7 GHz ARM Cortex-A9 CPU and a ULP GeForce GPU, paired with 1GB
of DDR3 RAM and 8GB of internal flash storage. Running a modified Android
4.1 (Jelly Bean) OS with a custom launcher, it aimed for open-source gaming
via a digital storefront.
This implementation is mostly based on upstream Linux device tree and
fragments of work done by previous developers.
Co-developed-by: Peter Geis <[email protected]>
Signed-off-by: Peter Geis <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
To simply porting phy drivers from Linux to U-Boot, define
phy_set_bits() and phy_clear_bits() functions with a similar API to
those used in Linux.
The U-Boot versions of these functions include the `devad` argument
which is not present in the Linux versions, to keep them aligned with
the other phy functions in U-Boot.
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Paul Barker <[email protected]>
|
|
Add a new driver to control the USB 2.0 PHY reset controller on the
Renesas RZ/G2L and related SoCs.
Signed-off-by: Paul Barker <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
extlinux / PXE"
Simon Glass <[email protected]> says:
This series includes some patches related to allowing read_all() to be
used with the extlinux / PXE bootmeths.
These patches were split out from the stb4 series, since it will need to
have additional patches for LWIP, to avoid breaking PXE booting when
LWIP is used.
Link: https://lore.kernel.org/r/[email protected]
|
