| Age | Commit message (Collapse) | Author |
|---|
|
Carve out a function to translate a Unicode code point to an 8bit codepage.
Provide a unit test for the new function.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Move the Unicode to codepage 437 table to charset.c
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Now that we have switched to CONFIG_OF_CONTROL, and we can use the
env variable 'fdtcontroladdr' directly instead of creating one that
is duplicated.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
The QEMU ppce500 target integrates a Freescale I2C controller and
has a Pericom pt7c4338 RTC connected to it. Enable corresponding
DM drivers so that 'date' command is actually useful.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
At present the board supports non-DM version PCI and E1000 drivers.
Switch over to use DM ETH and PCI by:
- Rewrite the PCI address map functions using DM APIs
- Enable CONFIG_MISC_INIT_R to do the PCI initialization and
address map
- Drop unnecessary ad-hoc config macros
- Remove board_eth_init() in the board codes
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
The QEMU ppce500 target integrates 2 NS16550 serial ports. Switch
over to use the DM version of the driver by:
- drop unnecessary ad-hoc config macros
- add get_serial_clock() in the board codes
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
This adds a basic test for the newly introduced 'addrmap' command.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
[Rebase]
Signed-off-by: Priyanka Jain <[email protected]>
|
|
At present address_map[] is static and its type is unknown to external
modules. In preparation to create a command to list its contents, this
patch moves its type definition and declaration to the header file.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
Remove the extern of the header because they are useless.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
CONFIG_SYS_PCI_MAP_END currently points to 0xe8000000, which means
the upper end of the virtual address mapped to PCI bus address ends
at 0xe8000000. But this is wrong as the CCSBAR was already mapped
at 0xe0000000 with a 1 MiB size.
Fixes: fa08d3951777 ("PPC 85xx: Add qemu-ppce500 machine")
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
Moves below via specific defines to Kconfig:
CONFIG_FSL_VIA
Signed-off-by: Rajesh Bhagat <[email protected]>
[Rebased]
Signed-off-by: Priyanka Jain <[email protected]>
|
|
This patch adds support for more PMBus compatible devices to the NXP
drivers for its QorIQ family devices. At runtime, the voltage regulator is
queried over I2C, and the required voltage multiplier determined. This
change supports the DIRECT and LINEAR PMBus voltage reporting modes.
Previously, the driver only supported a few specific devices such as the
IR36021 and LTC3882, so this change allows the QorIQ series to be used
with a much larger variety of core voltage regulator devices.
checkpatch warning "Use if (IS_DEFINED (...))" was ignored to maintain
consistency with the existing code.
Signed-off-by: Stephen Carlson <[email protected]>
Signed-off-by: Wasim Khan <[email protected]>
Tested-by: Wasim Khan <[email protected]>
[Rebased]
Signed-off-by: Priyanka Jain <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
i.MX for 2021.04
----------------
- new boards:
- i.MX8MN Beacon EmbeddedWorks (2GB)
- Gateworks Venice imx8mm
- convert to DM:
- imx53-qsb, mx53loco, mx51evk, mx23-evk
- Fixes :
- Network : FEC ethernet quirks
- DH dh-imx6
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/6597
|
|
Add initial support for Gateworks Venice product family based on the
i.MX 8M Mini SoC
Signed-off-by: Tim Harvey <[email protected]>
|
|
Now when usbtty serial console is fixed in U-Boot enable CONFIG_USB_TTY for
Nokia RX-51 board by default.
Fix also USB product id as U-Boot ignores CONFIG_USBD_PRODUCTID macro and
include U-Boot string into USB product name to indicate usage of U-Boot.
CONFIG_CONSOLE_MUX is already used and U-Boot console is available for
all in/out devices. Therefore there is no need to have separate commands
'run sercon', 'run usbcon' and 'run vgacon', so remove them.
As space for U-Boot is limited to 256kB, enable CONFIG_OPTIMIZE_INLINING
and disable some other unused options so CONFIG_USB_TTY can be enabled.
Nokia RX-51 does not have easily accessible UART serial console so the only
option for easy debugging is to use device's keyboard+screen or this usbtty
serial console over USB.
Signed-off-by: Pali Rohár <[email protected]>
Reviewed-by: Lukasz Majewski <[email protected]>
Acked-by: Pavel Machek <[email protected]>
|
|
In drivers we use a family of printing functions including pr_err() and
pr_cont(). CONFIG_LOGLEVEL is used to control which of these lead to output
via printf().
Our logging functions allow finer grained control of output. So replace
printf() by the matching logging functions. The usage of CONFIG_LOGLEVEL
remains unchanged.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
There is a second lpddr configuration with 2GB of RAM, but this requires
different RAM timings, so in addition to adding the timing file, a
separate defconfig is necessary.
Signed-off-by: Adam Ford <[email protected]>
|
|
Make the conversion to driver model as it is mandatory.
Tested booting the Linux kernel from the SD card.
Signed-off-by: Fabio Estevam <[email protected]>
|
|
Make the conversion to driver model as it is mandatory.
Remove the SATA support for now as the i.MX53 support has not
been added yet.
Signed-off-by: Fabio Estevam <[email protected]>
|
|
The RGMII link delays can be set on either MAC or PHY side. Set the
rgmii-id PHY mode for FEC and remove FEC_ENET_ENABLE_.XC_DELAY
setting, so that these definitions aren't used anymore throughout
the U-Boot.
Signed-off-by: Oleksandr Suvorov <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
Both NXP SoCs i.MX8 and i.MX8X have ENET gigabit MAC.
Define FEC_QUIRK_ENET_MAC for the imx8 platform and remove this
definition from configs of boards, based on MX8/MX8X.
Signed-off-by: Oleksandr Suvorov <[email protected]>
Acked-by: Marek Vasut <[email protected]>
Reviewed-By: Ramon Fried <[email protected]>
Acked-by: Oliver Graute <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
Some root filesystem configurations do not have separate /boot partition,
but rather place kernel, DT, scripts into /boot directory. Search the /boot
directory for these boot components in case they are not found in /, which
is the old behavior.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Ye Li <[email protected]>
Cc: uboot-imx <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Replace filesystem specific fatload command with a filesystem agnostic
load command, so the board can boot from e.g. ext4 too.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Ye Li <[email protected]>
Cc: uboot-imx <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
There is now CONFIG_SPL_DM_SPI{,_FLASH}, however keeping
CONFIG_DM_SPI{,_FLASH} enabled in SPL seems to grow the SPL
by a couple of bytes:
text data bss dec hex filename
- 34069 1568 96 35733 8b95 spl/u-boot-spl
+ 34075 1568 96 35739 8b9b spl/u-boot-spl
In either case, the binary is bootable, so remove the part
in board config.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Andreas Geisreiter <[email protected]>
Cc: Jagan Teki <[email protected]>
Cc: Ludwig Zenz <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
This reverts commit 03a673cf49e ("dh_imx6: Switch to full DM-aware").
According to discussion [1], the patch is known to break the dh_imx6
board, however it made it upstream just before 2021.01-rc4, likely by
mistake. Revert this patch to put the board back into working order.
Also note that this board has no DM SPL support due to OCRAM size
limitations, but that is fine, as SPL DM support is optional.
[1] https://lists.denx.de/pipermail/u-boot/2020-June/417986.html
Signed-off-by: Marek Vasut <[email protected]>
Cc: Andreas Geisreiter <[email protected]>
Cc: Jagan Teki <[email protected]>
Cc: Ludwig Zenz <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2021-04-rc3-2
Bug fixes:
* debug build for mkeficapsule
* limit output length for VenHw, VenMedia
* ACPI tables must be in EfiACPIReclaimMemory
|
|
- fastboot updates / fixes
|
|
- new GigaDevice flash ids
- fixes for imx, nxp_spi drivers
|
|
Correct missing descriptions and typos in efi_loader.h.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add support for booting from USB pen drive, since USB host port is
available on the STM32MP1.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
|
|
add support for the UUU commands ACmd and UCmd.
Enable them through the Kconfig option
CONFIG_FASTBOOT_UUU_SUPPORT
base was commit in NXP kernel
9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support")
and ported it to current mainline. Tested this patch
on imx6ul based board.
Signed-off-by: Heiko Schocher <[email protected]>
Acked-by: Patrick Delaunay <[email protected]>
|
|
This adds an option to part_get_info_by_dev_and_name_or_num to allow
callers to specify whether whole-disk partitions are fine.
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This line should come before the docs for the next function.
Fixes: 7aeedac0153 ("mtd: spi: Port SPI NOR framework from Linux")
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
U-Boot coding convention prefers tabs over spaces.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it. As this is the last ARCH_MPC8569 board, remove that support
as well.
Cc: Priyanka Jain <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.
Cc: Stefano Babic <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Stefano Babic <[email protected]>
|
|
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.
Cc: Fabio Estevam <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.
Cc: Fabio Estevam <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.
Cc: Fabio Estevam <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
Avoid build warnings observed with gcc 10.2
In file included from lib/rsa/rsa-keyprop.c:16:
include/u-boot/rsa-mod-exp.h:65:24: warning:
‘struct udevice’ declared inside parameter list will not be visible
outside of this definition or declaration
65 | int rsa_mod_exp(struct udevice *dev, const uint8_t *sig,
| uint32_t sig_len,
| ^~~~~~~
include/u-boot/rsa-mod-exp.h:96:24: warning:
‘struct udevice’ declared inside parameter list will not be visible
outside of this definition or declaration
96 | int (*mod_exp)(struct udevice *dev, const uint8_t *sig,
|
by defining struct udevice.
Fixes: 401d1c4f5d2d ("common: Drop asm/global_data.h from common header")
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Currently, the kernel devicetree is setting the DRAM size to ~4G.
Signed-off-by: Diego Sueiro <[email protected]>
|
|
Compiling the sandbox fails on armv7 due to conflicting definitions of
memcpy() and memset() in include/malloc.h and include/linux/string.h.
Use linux/string.h here.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Convert the hikey to use DM_USB and DM_ETH.
Conversion based on rpi as it has a similar DWC config.
Signed-off-by: Peter Robinson <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic
- adds adc-keys button driver
- fix meson-saradc driver to get reference voltage
- add adc-keys test for sandbox
- enable adc-keys for VIM3 & VIM3L boards
- fix button.h build
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Fix ethernet on J721e
- Sync am335x DT nodes from Linux 5.9-rc7
- Minor Clock fixes
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-video
- splash_source warning fix when building with 64-bit toolchains
- lq123p1jx31 and nv101wxmn51 compatible in simple panel driver
- remove not used mb862xx driver
- add Himax HX8238D panel driver
- s/video_uc_platdata/video_uc_plat/
|
|
After 401d1c4f5d2d ("common: Drop asm/global_data.h from common header")
build fails with :
drivers/button/button-uclass.c:13:5: error: conflicting types for 'button_get_by_label'
int button_get_by_label(const char *label, struct udevice **devp)
^~~~~~~~~~~~~~~~~~~
Adding struct udevice forward declaration in button.h solves the build error.
Fixes: 401d1c4f5d2d ("common: Drop asm/global_data.h from common header")
Suggested-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The linux/err.h header file was included twice.
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.
CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y',
- 0 otherwise.
All occurences were replaced automatically using these bash cmds:
$ find . -type f -exec sed -i
's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
Reviewed-by: Heiko Schocher <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Igor Opaniuk <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
Drop CONFIG_DM_I2C undefs from board header files, and make them
disabled on these boards in defconfigs instead.
Disabling on Kconfig symbol was done automatically with this script:
cd configs
files=(*ls1046a*)
files2=(*T104*RDB*)
files3=(ls1021atwr_*)
files4=("imx8mp_evk_defconfig phycore-imx8mp_defconfig")
combine=("${files[@]}" "${files2[@]}" "${files3[@]}" "${files4[@]}")
cd ..
for item in ${combine[*]}
do
echo "Adjusting $item"
echo "# CONFIG_SPL_DM_I2C is not set" >> configs/$item
make $item && make savedefconfig && cp defconfig configs/$item
done
Signed-off-by: Igor Opaniuk <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
