| Age | Commit message (Collapse) | Author |
|---|
|
Fix board part of AT91SAM9261-EK according to the new scheme
Signed-off-by: Hong Xu <[email protected]>
Signed-off-by: Reinhard Meyer <[email protected]>
|
|
Rework for AT91SAM9RL-EK, makes it build again.
Based on the work for AT91SAM9260-EK.
V4: added changes to MAKEALL
Signed-off-by: Hong Xu <[email protected]>
Signed-off-by: Reinhard Meyer <[email protected]>
|
|
- Add mkimage support for OMAP boot image
- Add support for OMAP boot image(MLO) generation in the new
SPL framework
Signed-off-by: John Rigby <[email protected]>
Signed-off-by: Aneesh V <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
- Add MMC raw and FAT mode boot support for OMAP
- Provide a means by which parameters passed by ROM-code
can be saved in u-boot.
- Save boot mode related information passed by OMAP4 ROM-code
and use it to determine where to load the u-boot from
- Assumes that the image has a mkimage header. Gets the
payload size and load address from this header. If the
header is not detected assume u-boot.bin as payload
Signed-off-by: Aneesh V <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
- Provide alternate implementations of board_init_f()
board_init_r() for OMAP spl.
- Provide linker script
- Initialize global data
- Add serial console support
- Update CONFIG_SYS_TEXT_BASE to allow for SPL's bss and move
it to board config header from config.mk
Signed-off-by: Aneesh V <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
Identify SDRAM devices connected to EMIF automatically:
LPDDR2 devices have some Mode Registers that provide details
about the device such as the type, density, bus width
etc. EMIF has the capability to read these registers. If there
are no devices connected to a given chip-select reading mode
registers will return junk values. After reading as many such
registers as possible and matching with expected ranges of
values the driver can identify if there is a device connected
to the respective CS. If we identify that a device is connected
the values read give us complete details about the device.
This along with the base AC timings specified by JESD209-2
allows us to do a complete automatic initialization of
SDRAM that works on all boards.
Please note that the default AC timings specified by JESD209-2
will be safe for all devices but not necessarily optimal. However,
for the Elpida devices used on Panda and SDP the default timings
are both safe and optimal.
Signed-off-by: Aneesh V <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
Calculate EMIF register values based on AC timing parameters
from the SDRAM datasheet and the DDR frequency rather than
using the hard-coded values.
For a new board the user doen't have to go through the tedious
process of calculating the register values. Instead, just
provide the AC timings from the device data sheet as input
and the driver will automatically calculate the register values.
Signed-off-by: Aneesh V <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>
|
|
* 'master' of git://git.denx.de/u-boot-blackfin:
Blackfin: jtag-console: fix timer usage
Blackfin: switch to common display_options()
Blackfin: serial: move early debug strings into .rodata section
Blackfin: adi boards: also set stderr to nc with helper
Blackfin: update anomaly lists to latest public info
Blackfin: serial: convert to bfin_{read,write} helpers
Blackfin: split out async setup
Blackfin: adi boards: enable pretty flash progress output
Blackfin: drop unused dma.h header from start code
Blackfin: portmux: allow header to be included in assembly files
Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: enable mmc_spi support
Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update network settings
Blackfin: sync MMR read/write helpers with Linux
Blackfin: gpio: optimize free path a little
Blackfin: post: setup default CONFIG_SYS_POST_WORD_ADDR
Blackfin: uart: fix printf warning
Blackfin: add init.elf helper code
Blackfin: dont reset SWRST on newer bf526 parts
Blackfin: adi boards: enable multi serial support by default
Blackfin: uart: add multiple serial support
Blackfin: uart: move debug buffers into local bss
|
|
* 'master' of git://git.denx.de/u-boot-mips:
README: update MIPS related informations
MIPS: make cache operation mode configurable
MIPS: rename INFINEON_EBU_BOOTCFG to CONFIG_SYS_XWAY_EBU_BOOTFG
MIPS: INCA-IP: rename inca-swap-bytes host tool
|
|
Signed-off-by: Wolfgang Denk <[email protected]>
Cc: Stefan Roese <[email protected]>
|
|
Fix compiler warning:
cmd_fpga.c:318: warning: passing argument 3 of 'fit_image_get_data'
from incompatible pointer type
Adding the needed 'const' here entails a whole bunch of additonal
changes all over the FPGA code.
Signed-off-by: Wolfgang Denk <[email protected]>
Cc: Andre Schwarz <[email protected]>
Cc: Murray Jensen <[email protected]>
Acked-by: Andre Schwarz<[email protected]>
|
|
Clean up some duplicated prototype declarations.
Get rid of now useless AVR32 initcalls.h file.
Signed-off-by: Wolfgang Denk <[email protected]>
Cc: Albert Aribaud <[email protected]>
Cc: Haavard Skinnemoen <[email protected]>
Cc: Graeme Russ <[email protected]>
|
|
This define is a board-specific config option and should be
renamed to follow the U-Boot naming convention. Additionally,
add an explaining comment for this option.
Signed-off-by: Daniel Schwierzeck <[email protected]>
Acked-by: Thomas Langer <[email protected]>
Signed-off-by: Shinya Kuribayashi <[email protected]>
|
|
The INCA-IP SoC belongs to the Lantiq XWAY SoC product portfolio.
For the upcoming support of other Lantiq SoC devices this tool should
not solely depend on the INCA-IP board.
Rename the tool to xway-swap-bytes and add an config option
to enable compilation optionally.
Signed-off-by: Daniel Schwierzeck <[email protected]>
Acked-by: Thomas Langer <[email protected]>
Signed-off-by: Shinya Kuribayashi <[email protected]>
|
|
* 'master' of /home/wd/git/u-boot/custodians:
powerpc/8xxx: Remove dependency on <usb.h>
powerpc/85xx: enable USB2 gadget mode for corenet ds board
powerpc/85xx: verify the device tree before booting Linux
MPC8xxx: drop redundant boot messages
powerpc/85xx: Fix build failure for P1023RDS
powerpc/p2041rdb: Enable SATA support
powerpc/85xx: Cleanup handling of PVR detection for e500/e500mc/e5500
powerpc/85xx: Fix up clock_freq property in CAN node of dts
85xx: enable FDT support for STX SSA board
powerpc/85xx: provide 85xx flush_icache for cmd_cache
powerpc/p2041rdb: Enable backside L2 cache support
powerpc/85xx: Handle the lack of L2 cache on P2040/P2040E
powerpc/85xx: Add support for P2041[e] XAUI in SERDES
powerpc/85xx: Rename P2040 id & SERDES to P2041
powerpc/85xx: Adding configuration for DCSRCR to enable 32M access
powerpc/85xx: Fix setting of EPAPR_MAGIC value
|
|
This is needed to get rid of build warnings like
main.c:311: warning: passing argument 2 of 'setenv' discards qualifiers from pointer target type
which result from commit 09c2e90 "unify version_string".
Signed-off-by: Wolfgang Denk <[email protected]>
Cc: Andreas Bie�mann <[email protected]>
|
|
to make USB2 worked in gadget mode, we need to set it's 'dr_mode' to
'peripheral' in hwconfig, but driver starts scan from 'usb1', it'll break
out if it cannot find 'usb1', so drop the 'else' clause to make driver scan
all the 'usbx'.
Signed-off-by: Shaohui Xie <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>
|
|
When we added the fman fdt fixup we forgot to fixup the P1023RDS
platform. So we would get:
fdt.c: In function 'fdt_fixup_fman_firmware':
fdt.c:465:15: error: 'CONFIG_SYS_FMAN_FW_LENGTH' undeclared (first use in this function)
fdt.c:465:15: note: each undeclared identifier is reported only once for each function it appears in
Add the needed #defines in P1023RDS.h to fix this.
Signed-off-by: Kumar Gala <[email protected]>
|
|
Signed-off-by: Mingkai Hu <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>
|
|
We also have to shift TEXT_BASE to accomodate for the additional
code size.
Signed-off-by: Wolfgang Denk <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>
|
|
Signed-off-by: Mingkai Hu <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>
|
|
This include is needed, if this memory test is used "outside"
from post code, for example booting with nand_spl, and using
this memory test before copying u-boot code to RAM and jumping
to it.
Signed-off-by: Heiko Schocher <[email protected]>
|
|
Commit 09c2e90 "unify version_string" introduced a build error,
fix it.
Signed-off-by: Andreas Bie�mann <[email protected]>
Signed-off-by: Wolfgang Denk <[email protected]>
|
|
Signed-off-by: Niklaus Giger <[email protected]>
|
|
Recieve/Receive
recieve/receive
Interupt/Interrupt
interupt/interrupt
Addres/Address
addres/address
Signed-off-by: Mike Williams <[email protected]>
|
|
Signed-off-by: Jeroen Hofstee <[email protected]>
|
|
This patch removes the architecture specific implementation of
version_string where possible. Some architectures use a special place
and therefore we provide U_BOOT_VERSION_STRING definition and a common
weak symbol version_string.
Signed-off-by: Andreas Bie�mann <[email protected]>
CC: Mike Frysinger <[email protected]>
CC: Peter Pan <[email protected]>
Acked-by: Mike Frysinger <[email protected]>
|
|
creating an u-boot.ubl file, which contains the UBL Header
needed for booting from NAND with the RBL from TI. For more
information read doc/README.ublimage.
Signed-off-by: Heiko Schocher <[email protected]>
|
|
Signed-off-by: Michael Jones <[email protected]>
|
|
Signed-off-by: Michael Jones <[email protected]>
Acked-by: Detlev Zundel <[email protected]>
|
|
Moved eeprom config to specific part, to allow bigger eeprom write pages
for km_kirkwood designs. Write page only used for env eeprom in std use
cases. 24C128 has page size of 64bytes -> 8 time faster.
Signed-off-by: Stefan Bigler <[email protected]>
cc: Valentin Longchamp <[email protected]>
cc: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
|
|
Now we use the standard u-boot make to build the Kirkwood binary.
The output file is u-boot.kwb. So use this name for the tftp
update function to avoid confusion, because this is the binary we
need on Kirkwood.
Signed-off-by: Holger Brunck <[email protected]>
cc: Valentin Longchamp <[email protected]>
cc: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
|
|
see discussion also here:
http://patchwork.ozlabs.org/patch/75309/
Signed-off-by: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
cc: Holger Brunck <[email protected]>
|
|
All the km boards uses CRAMFS images where the kernel is stored.
This isn't architecture specific because we use it on ARM and
POWERPC.
Signed-off-by: Holger Brunck <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
cc: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
|
|
Common code should be valid for more than one architecture,
therefore the km82xx specific code was removed from common.c.
Signed-off-by: Holger Brunck <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
cc: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
|
|
These defines and the header keymile_hdlc_enet.h are obsolete
due to the removed hdlc code.
Signed-off-by: Holger Brunck <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
cc: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
|
|
The debug environment which is stored in textfiles in the
scripts directory was reworked. Two usecase are now present
which can be executed simply from the default environment:
run develop: this configures the environment to setup the
rootfs via nfs
run ramfs: this configures the environment to setup the
rootfs in ram
Each architecture now has a "arch" variable which is used
to load the architecture specific debug scripts and to set
the rootpath for NFS.
Signed-off-by: Holger Brunck <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
cc: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
|
|
The test SW is started when the test_bank variable is set.
Signed-off-by: Thomas Herzmann <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
cc: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
Signed-off-by: Holger Brunck <[email protected]>
|
|
This is the second step to simplify and decrease the default
environment for the keymile boards. The release usecase formaly
used to set the production environment was removed and the default
configuration is now the production environment. So the formar
environment variable "release" which has done a lot of things
in the past, simply erase the current environment and do a reset
which forces u-boot to setup the default environment again.
Signed-off-by: Holger Brunck <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
cc: Heiko Schocher <[email protected]>
cc: Wolfgang Denk <[email protected]>
|
|
Signed-off-by: Anatolij Gustschin <[email protected]>
|
|
Add detection and initialisation for graphic extension board
and support splash screen when booting. Enable "bmp" command
in the board configuration and provide "disp" command to
be able to switch the display on/off.
Signed-off-by: Anatolij Gustschin <[email protected]>
Acked-by: Detlev Zundel <[email protected]>
|
|
gen10g_startup() had 2 bugs:
1) It had a boolean logic error in checking the MMD mask, and
always checked all of them.
2) It checked devices which don't actually report link state, which
meant that it would never believe the link was fully up.
Fix the boolean logic, and then mask the MMD mask so only link-reporting
devices are checked.
Signed-off-by: Andy Fleming <[email protected]>
Reported-by: Ed Swarthout <[email protected]>
|
|
Since panic() never returns, we should add an appropriate attribute to
let gcc improve optimization around it.
Signed-off-by: Mike Frysinger <[email protected]>
|
|
This adds a simple flash test to automatically verify erasing,
writing, and reading of sectors. The code is based on existing
Blackfin tests but generalized for everyone to use.
Signed-off-by: Mike Frysinger <[email protected]>
|
|
The current arch/driver specific UART posts basically boil down to setting
the UART to loop back mode, then reading and writing data. If we ignore
the loop back part, the rest can be built upon the existing common serial
API. So let's do just that.
First add a call back for serial drivers to implement loop back control.
Then write a post test that walks all of the serial drivers, puts them
into loop back mode, and verifies that reading/writing at all the diff
baud rates is OK.
If a serial driver doesn't support loop back mode (either it can't or
it hasn't done so yet), then skip it. This should allow for people to
easily migrate to the new post test with existing serial drivers.
I haven't touched the few already existing uart post tests as I don't
the hardware or knowledge of converting them over. So I've marked the
new test as weak which will allow the existing tests to override the
default until they are converted.
Signed-off-by: Mike Frysinger <[email protected]>
|
|
The multi serial support has a "ctlr" field which almost no one uses,
but everyone is forced to set to useless strings. So punt it.
Funny enough, the only code that actually reads this field (the mpc8xx
driver) has a typo where it meant to look for the SCC driver. Fix it
while converting the check to use the name field.
Signed-off-by: Mike Frysinger <[email protected]>
CC: Heiko Schocher <[email protected]>
CC: Anatolij Gustschin <[email protected]>
CC: Tom Rix <[email protected]>
CC: Minkyu Kang <[email protected]>
CC: Craig Nauman <[email protected]>
CC: Marek Vasut <[email protected]>
CC: Prafulla Wadaskar <[email protected]>
CC: Mahavir Jain <[email protected]>
|
|
The usage helper doesn't modify the command, so constify its input arg.
Signed-off-by: Mike Frysinger <[email protected]>
|
|
I can't see any obvious needs for the default environment to be writable,
so make it const.
Signed-off-by: Mike Frysinger <[email protected]>
|
|
For people who want to manually extract the embedded environment so that
it can be manually packed into the final u-boot image, add a config opt
to force building of the envcrc tool.
Signed-off-by: Mike Frysinger <[email protected]>
|
|
Once we add a new page_size field for write lengths, we can unify the
write methods for most of the spi flash drivers.
Signed-off-by: Mike Frysinger <[email protected]>
|
