summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2023-01-20fs/fat: avoid noisy message fat_read_file()Heinrich Schuchardt
UEFI applications call file system functions to determine if a file exists. The return codes are evaluated to show appropriate messages. U-Boot's file system layer should not interfere with the output. Rename file_fat_read_at() to fat_read_file() adjusting the parameter sequence and names and eliminate the old wrapper function. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Tom Rini <[email protected]> Reviewed-by: Ilias Apalodimas <[email protected]>
2023-01-19Merge tag 'dm-pull-18jan23' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dm convert rockchip to use binman patman fix for checkpatch binman optional entries, improved support for ELF symbols trace improvements minor fdt refactoring
2023-01-18odroid: limit boot memory to lowmemJoost van Zwieten
In commit 4963f63fe61f ("image: Use gd->ram_base/_size in env_get_bootm_size()") the size of the available memory for U-Boot to use when relocating images, and not otherwise constrained, was changed to include all known memory banks. In the case of this platform however, all of the memory known to U-Boot is not also part of the Linux kernel "lowmem" and so we must use CFG_SYS_BOOTMAPSZ to limit where we relocate images to. We set a conservative limit of 256MB here to mirror the previous behavior. Signed-off-by: Joost van Zwieten <[email protected]> [trini: Reword the commit messsage] Signed-off-by: Tom Rini <[email protected]>
2023-01-18lib: zstd: update to latest Linux zstd 1.5.2Brandon Maier
Update the zstd implementation to match Linux zstd 1.5.2 from commit 2aa14b1ab2. This was motivated by running into decompression corruption issues when trying to uncompress files compressed with newer versions of zstd. zstd users also claim significantly improved decompression times with newer zstd versions which is a side benefit. Original zstd code was copied from Linux commit 2aa14b1ab2 which is a custom-built implementation based on zstd 1.3.1. Linux switched to an implementation that is a copy of the upstream zstd code in Linux commit e0c1b49f5b, this results in a large code diff. However this should make future updates easier along with other benefits[1]. This commit is a straight mirror of the Linux zstd code, except to: - update a few #include that do not translate cleanly - linux/swab.h -> asm/byteorder.h - linux/limits.h -> linux/kernel.h - linux/module.h -> linux/compat.h - remove assert() from debug.h so it doesn't conflict with u-boot's assert() - strip out the compressor code as was done in the previous u-boot zstd - update existing zstd users to the new Linux zstd API - change the #define for MEM_STATIC to use INLINE_KEYWORD for codesize - add a new KConfig option that sets zstd build options to minify code based on zstd's ZSTD_LIB_MINIFY[2]. These changes were tested by booting a zstd 1.5.2 compressed kernel inside a FIT. And the squashfs changes by loading a file from zstd compressed squashfs with sqfsload. buildman was used to compile test other boards and check for binary bloat, as follows: > $ buildman -b zstd2 --boards dh_imx6,m53menlo,mvebu_espressobin-88f3720,sandbox,sandbox64,stm32mp15_dhcom_basic,stm32mp15_dhcor_basic,turris_mox,turris_omnia -sS > Summary of 6 commits for 9 boards (8 threads, 1 job per thread) > 01: Merge branch '2023-01-10-platform-updates' > arm: w+ m53menlo dh_imx6 > 02: lib: zstd: update to latest Linux zstd 1.5.2 > aarch64: (for 2/2 boards) all -3186.0 rodata +920.0 text -4106.0 > arm: (for 5/5 boards) all +1254.4 rodata +940.0 text +314.4 > sandbox: (for 2/2 boards) all -4452.0 data -16.0 rodata +640.0 text -5076.0 [1] https://github.com/torvalds/linux/commit/e0c1b49f5b674cca7b10549c53b3791d0bbc90a8 [2] https://github.com/facebook/zstd/blob/f302ad8811643c428c4e3498e28f53a0578020d3/lib/libzstd.mk#L31 Signed-off-by: Brandon Maier <[email protected]> [trini: Set ret to -EINVAL for the error of "failed to detect compressed" to fix warning, drop ZSTD_SRCSIZEHINT_MAX for non-Linux host tool builds] Signed-off-by: Tom Rini <[email protected]>
2023-01-18fdt: Avoid exporting fdtdec_prepare_fdt()Simon Glass
This function is not used outside this file. Make it static. Signed-off-by: Simon Glass <[email protected]>
2023-01-17Merge branch '2022-01-16-bootstd-updates'Tom Rini
To quote the author: So far standard boot lacks a boot menu, although it is possible to create a rudimentary one using the existing 'bootmenu' command. Even then, this text-based menu offer only basic functionality and does not take full advantage of the displays which are common on many devices. This series provides a 'bootflow menu' command which allows the user to select from the available bootflows. An attempt is made to show the name of the available operating systems, by reading more information into the bootflow. A logo can be read also, where supported, so that this can be presented to the user when an option is highlighted. Full use is made of TrueType fonts, if enabled. For cases where only a serial console is available, it falls back to a simple text-based menu. All of this is implementing using a new 'expo' construct, a collection of scenes (like menu screens) which can be navigated by the user to view information and select options. This is fairly general and should be able to cope with a wider array of use cases, with less hacking of the menu code, such as is currently needed for CMD_BOOTEFI_BOOTMGR. Of course it would be possible to enhance the existing menu rather than creating a new setup. Instead it seems better to make the existing menu use expo, if code space permits. It avoids the event-loop problem and should be more extensible, given its loosely coupled components and use of IDs instead of pointers. Further motivation is provided in the documentation. For now the CLI keypress-decoding code is split out to be used by the new menu. The key codes defined by menu.h are reused also. This is of course just a starting point. Some ideas for future work are included in the documentation.
2023-01-16bootstd: Support setting a theme for the menuSimon Glass
Allow a theme to be set. For now this is very simple, just a default font size to use for all elements. Signed-off-by: Simon Glass <[email protected]>
2023-01-16bootstd: Support creating a boot menuSimon Glass
Create an expo to handle the boot menu. For now this is quite simple, with just a header, some menu items and a pointer to show the current one. Signed-off-by: Simon Glass <[email protected]>
2023-01-16expo: Add basic implementationSimon Glass
An expo is a way of presenting and collecting information from the user. It consists of a collection of 'scenes' of which only one is presented at a time. An expo is typically used to show a boot menu and allow settings to be changed. One created, the same expo can be automatically presented in graphical form using a vidconsole, or in text form on a serial console. Add an initial implementation of the expo itself. Supports for scenes and objects is provided later. Signed-off-by: Simon Glass <[email protected]>
2023-01-16menu: Factor out menu-keypress decodingSimon Glass
Move this code into a separate function so that it can be used in the new VBE menu. Signed-off-by: Simon Glass <[email protected]>
2023-01-16bootstd: Allow reading a logo for the OSSimon Glass
Some operating systems provide a logo in bmp format. Read this in if present so it can be displayed in the menu. Signed-off-by: Simon Glass <[email protected]>
2023-01-16bootstd: Read the Operating System name for distro/scriptsSimon Glass
Add the concept of an OS name to the bootflow. This typically includes the OS name, version and kernel version. Implement this for the distro and script bootmeths so that it works with Armbian and older version of Fedora. Signed-off-by: Simon Glass <[email protected]>
2023-01-16video: Add font functions to the vidconsole APISimon Glass
Support for fonts currently depends on the type of vidconsole in use. Add two new methods to enumerate fonts and to set the font. Fix a few other method comments while we are here. Signed-off-by: Simon Glass <[email protected]>
2023-01-16video: Fix unchnaged typoSimon Glass
Fix this typo in the header file. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2023-01-16image: Move common image code to image_board and commandSimon Glass
We should use the cmd/ directory for commands rather than for common code used elsewhere in U-Boot. Move the common 'source' code into image-board.c to achieve this. The image_source_script() function needs to call run_command_list() so seems to belong better in the command library. Move and rename it. Signed-off-by: Simon Glass <[email protected]>
2023-01-16image: Add a function to find a script in an imageSimon Glass
Split this functionality out of the 'source' command so it can be used from another place. For now leave it where it is, but a future patch will move it out of cmd/ Signed-off-by: Simon Glass <[email protected]>
2023-01-16menu: Make use of CLI character processingSimon Glass
Avoid duplicating some of the escape-sequence processing here and use the CLI function instead. Signed-off-by: Simon Glass <[email protected]>
2023-01-16menu: Update bootmenu_loop() to return the codeSimon Glass
Use the return value to save having to pass around a pointer. This also resolves any ambiguity about what *key contains when the function is called. Signed-off-by: Simon Glass <[email protected]>
2023-01-16menu: Update bootmenu_autoboot_loop() to return the codeSimon Glass
Use the return value to save having to pass around a pointer. This also resolves any ambiguity about what *key contains when the function is called. Signed-off-by: Simon Glass <[email protected]>
2023-01-16menu: Rename KEY_... to BKEY_...Simon Glass
This enum values conflict with linux/input.h so rename them. Signed-off-by: Simon Glass <[email protected]>
2023-01-16bootmenu: Add a few commentsSimon Glass
The behaviour of these two functions is completely undocumented. Add some notes so the poor, suffering dev can figure out what is going on. Signed-off-by: Simon Glass <[email protected]>
2023-01-16cli: Move readline character-processing to a state machineSimon Glass
The current cread_line() function is very long. It handles the escape processing inline. The menu command does similar processing but at the character level, so there is some duplication. Split the character processing into a new function cli_ch_process() which processes individual characters and returns the resulting input character, taking account of escape sequences. It requires the caller to set up and maintain its state. Update cread_line() to use this new function. The only intended functional change is that an invalid escape sequence does not add invalid/control characters into the input buffer, but instead discards these. Signed-off-by: Simon Glass <[email protected]>
2023-01-16rockchip: add support for PX30 Ringneck SoM on Haikou DevkitQuentin Schulz
The PX30-µQ7 (Ringneck) is a system-on-module featuring the Rockchip PX30 in a micro Qseven-compatible form-factor. PX30-µQ7 features: * CPU: quad-core Cortex-A35 * DRAM: 2GB dual-channel * eMMC: onboard eMMC * SD/MMC * TI DP83825I 10/100Mbps PHY * USB: * USB2.0 dual role port * 3x USB2.0 host via onboard USB2.0 hub * Display: MIPI-DSI * Camera: MIPI-CSI * onboard 2.4GHz WiFi + Bluetooth module * Companion Controller: on-board additional microcontroller (STM32 Cortex-M0 or ATtiny): * RTC * fan controller * CAN (only STM32) The non-U-Boot DTS files are imported from Linux v6.2-rc2. Cc: Quentin Schulz <[email protected]> Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Quentin Schulz <[email protected]>
2023-01-16rockchip: px30: fix CFG_IRAM_BASEQuentin Schulz
The IRAM on PX30 (or Int_MEM in datasheet) starts at 0xff0e0000 and not 0xff020000 as rightfully stated in the FIXME comment. Let's fix it so that BROM_BOOTSOURCE_ID_ADDR points to the correct address for PX30. Fixes: 46281a76bee3 ("rockchip: add core px30 headers") Cc: Quentin Schulz <[email protected]> Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Quentin Schulz <[email protected]>
2023-01-16rockchip: Add initial support for the PINE64 Pinephone ProPeter Robinson
The Pinephone Pro is another device by PINE64. It's closely related to the Pinebook Pro of which this initial support is derived from. Specification: - A variant of the Rockchip RK3399 - A 6 inch 720*1440 DSI display - Front and rear cameras - Type-C interface with alt mode display (DP 1.2) and PD charging - 4GB LPDDR4 RAM - 128GB eMMC - mSD card slot - An AP6255 module for 802.11ac WiFi and Bluetooth 5 - Quectel EG25-G 4G/LTE modem Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-01-16board: rockchip: Add Edgeble Neu2 IO BoardJagan Teki
Neural Compute Module 2(Neu2) IO board is an industrial form factor IO board from Edgeble AI. General features: - microSD slot - MIPI DSI connector - 2x USB Host - 1x USB OTG - Ethernet - mini PCIe - Onboard PoE - RS485, RS232, CAN - Micro Phone array - Speaker - RTC battery slot - 40-pin expansion Neu2 needs to mount on top of this IO board in order to create complete Edgeble Neural Compute Module 2(Neu2) IO platform. Add support for it. Signed-off-by: Jagan Teki <[email protected]>
2023-01-16arm: rockchip: Add RV1126 arch core supportJagan Teki
Rockchip RV1126 is a high-performance vision processor SoC for IPC/CVR, especially for AI related application. Add arch core support for it. Signed-off-by: Jagan Teki <[email protected]> Signed-off-by: Kever Yang <[email protected]> Reviewed-by: Kever Yang <[email protected]> Change-Id: I22fde40ec375e3c6aba39808abf252edc45d4b04
2023-01-16dt-bindings: power: Add power-domain header for rv1126Jagan Teki
Add power-domain header for RV1126 SoC from description in TRM. Signed-off-by: Elaine Zhang <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-01-16dt-bindings: clk: Add dt-binding header for RV1126Jagan Teki
Add the dt-bindings header for the Rockchip RV1126, that gets shared between the clock controller and the clock references in the dts. Signed-off-by: Finley Xiao <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-01-16rc4: mark key as constJohn Keeping
Key data is never written so the parameter can be const, which allows putting fixed keys in .rodata. Signed-off-by: John Keeping <[email protected]> Reviewed-by: Philipp Tomsich <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-01-13doc: fix description of u16_strcasecmp()Heinrich Schuchardt
Remove non-existent parameter 'n' from function description. Fixes: 7a9b366cd9b7 ("lib: add function u16_strcasecmp()") Signed-off-by: Heinrich Schuchardt <[email protected]>
2023-01-12gpio: Get rid of gpio_hog_probe_all()Marek Vasut
The gpio_hog_probe_all() functionality can be perfectly well replaced by DM_FLAG_PROBE_AFTER_BIND DM flag, which would trigger .probe() callback of each GPIO hog driver instance after .bind() and thus configure the hogged GPIO accordingly. Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Quentin Schulz <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]> Reviewed-by: Samuel Holland <[email protected]>
2023-01-12distro_bootcmd: Set distro_bootpart_uuid for block devicesMarek Vasut
The assignment of block device nodes in Linux is not deterministic by default, i.e. a newly added eMMC controller or other block device can change the assignment of /dev/mmcblkN (or other block device node like e.g. /dev/sdXy) and prevent the system from picking the correct block device for root filesystem in case the root filesystem is specified on kernel command line using 'root=/dev/mmcblkNpM' (or 'root=/dev/sdXy' etc.). One way out is to derive PARTUUID in U-Boot, which is unique identifier of a partition, and pass that as root=PARTUUID=<partuuid> to Linux via kernel command line. Linux would then find the partition using PARTUUID, no matter on which block device the partition resides and which node was assigned to that block device. Derive the PARTUUID before scanning for extlinux presence and assign it into distro_bootpart_uuid environment variable, which can then be used in extlinux.conf kernel command line specifier. Note that it is not possible to do this in scan_dev_for_extlinux script because this script is called from scan_dev_for_boot script, which is called for both block devices as well as UBI volumes, and we can not derive PARTUUID for UBI volumes. Signed-off-by: Marek Vasut <[email protected]>
2023-01-12misc: fs_loader: Add function to get the chosen loaderSean Anderson
The fs_loader device is used to pull in settings via the chosen node. However, there was no library function for this, so arria10 was doing it explicitly. This function subsumes that, and uses ofnode_get_chosen_node instead of navigating the device tree directly. Because fs_loader pulls its config from the environment by default, it's fine to create a device with nothing backing it at all. Doing this allows enabling CONFIG_FS_LOADER without needing to modify the device tree. Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Ramon Fried <[email protected]>
2023-01-11test: cmd: exit: Add unit test for exit and partly run commandsMarek Vasut
Add a test which validates that exit from environment script works as expected, including return value propagation and clipping to positive integers. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2023-01-11fastboot: Add OEM run commandSean Anderson
This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2023-01-11fastboot: remove #ifdef CONFIG when it is possiblePatrick Delaunay
Much of the fastboot code predates the introduction of Kconfig and has quite a few #ifdefs in it which is unnecessary now that we can use IS_ENABLED() et al. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]> Reviewed-by: Sean Anderson <[email protected]> Tested-by: Mattijs Korpershoek <[email protected]> # on vim3l
2023-01-10board: starqltechn: enable serial consoleDzmitry Sankouski
It was temporary disabled due to problem with boot. Issue was fixed in commit f5ed6c9ccf3e ("uart: sdm845: Fix debug UART pinmux") Signed-off-by: Dzmitry Sankouski <[email protected]>
2023-01-10configs: am62a: use kernel fitImage when using secure bootflowBryan Brattlof
In order to maintain the chain of trust, each stage of the boot process will first authenticate each binary it loads before continuing. To extend this to the kernal and its dtbs we can package the kernal and its dtbs into another fitImage for Uboot to authenticate and extend the chain of trust all the way to the kernel. When 'boot_fit' is set, indicating we're using the secure bootflow, look for and authenticate the kernel's fitImage. Signed-off-by: Judith Mendez <[email protected]> Signed-off-by: Bryan Brattlof <[email protected]>
2023-01-10configs: am62a: convert bootcmd to distro_bootcmdBryan Brattlof
We're currently using CONFIG_BOOTCOMMAND to run custom boot scripts to jump into linux. While this works, let's begin the transition to more distribution friendly jumps to linux by enabling distro_bootcmd. Convert the custom bootcmd to a distro_bootcmd Signed-off-by: Judith Mendez <[email protected]> Signed-off-by: Bryan Brattlof <[email protected]>
2023-01-10configs: Enable distroboot on am625Martyn Welch
TI boards use a custom (though faily common to TI boards) mechanism for booting Linux. We would like to use the "distroboot" approach. Enable distroboot as a further option to use for booting on am625 should the existing options fail. Signed-off-by: Martyn Welch <[email protected]>
2023-01-09ns16650: Correct CONFIG_SYS_NS16550_MEM32 platformsTom Rini
There are currently no platform that are both CONFIG_SYS_NS16550_MEM32 and not (per how the logic was prior to being broken in 0478dac62a9a ("kbuild: Remove uncmd_spl logic")) enabled in CONFIG_DM_SERIAL. We drop this line out now so that platforms which do use CONFIG_SYS_NS16550_MEM32 and depending on stage may or may not have DM_SERIAL set. Fixes: 0478dac62a9a ("kbuild: Remove uncmd_spl logic") Reported-by: Quentin Schulz <[email protected]> Signed-off-by: Tom Rini <[email protected]> Tested-by: Quentin Schulz <[email protected]> #on Ringneck PX30, Puma RK3399
2023-01-09Merge branch 'next'Tom Rini
Signed-off-by: Tom Rini <[email protected]>
2023-01-08Merge tag 'u-boot-nand-20230108' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-nand-flash into next Pull request for u-boot-nand-20230108 - rawnand: omap_gpmc: driver model support
2023-01-08distro_bootcmd: Fix copy-paste errorMarek Vasut
The "SCRIPT FAILED" string is copied from scan_dev_for_scripts script, update it so it prints "EXTLINUX FAILED" instead in scan_dev_for_extlinux script. Signed-off-by: Marek Vasut <[email protected]>
2023-01-08mtd: rawnand: omap_elm: u-boot driver model supportRoger Quadros
Support u-boot driver model. We still retain support legacy way of doing things if ELM_BASE is defined in <asm/arch/hardware.h> We could completely get rid of that if all platforms defining ELM_BASE get rid of that definition and enable CONFIG_SYS_NAND_SELF_INIT and are verified to work. Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Michael Trimarchi <[email protected]> Signed-off-by: Dario Binacchi <[email protected]> Reviewed-by: Tom Rini <[email protected]> Link: https://lore.kernel.org/all/[email protected] Link: https://lore.kernel.org/all/CABGWkvrvKiVA_yaDnHJcHEKwc+pEuLdz=i6HQEY0oJQvohCUsw@mail.gmail.com
2023-01-06efi_loader: carve out efi_get_memory_map_alloc()Heinrich Schuchardt
Carve out code from efidebug command used to read the memory map. Signed-off-by: Heinrich Schuchardt <[email protected]>
2023-01-06vexpress: adjust loadaddrHeinrich Schuchardt
On the vexpress_ca9x4 $loadaddr points to a memory area used by the EFI sub-system. Use the same value as $kernel_addr_r which is safe. Signed-off-by: Heinrich Schuchardt <[email protected]>
2023-01-06Merge tag 'u-boot-at91-2023.04-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2023.04 cycle: This feature set includes the new DM-based NAND flash driver (old non-DM driver is still kept for backwards compatibility), and the move to DM NAND flash driver for sam9x60ek board. Feature set also includes devicetree alignment for sama7g5 with Linux, devicetree alignment on USB with Linux for all boards (sama5, sam9x60), chip id for sama7g5, minor configs and tweaks.
2023-01-05dt-bindings: clk: at91: Define additional UTMI related clocksSergiu Moga
Add definitions for an additional main UTMI clock as well as its respective subclocks. Signed-off-by: Sergiu Moga <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-06-02 16:29:22 +0000