| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Luka Perkov <[email protected]>
Acked-by: Stefan Roese <[email protected]>
CC: Prafulla Wadaskar <[email protected]>
|
|
Add deep sleep support on Freescale LS1021QDS platform.
Signed-off-by: Tang Yuantian <[email protected]>
[York Sun: Fix conflict in fdt.c]
Reviewed-by: York Sun <[email protected]>
|
|
Enable an environment area.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Add a hook to ensure that this information is saved.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
As a temporary measure before the ICH driver moves over to driver model,
add device tree support to the driver.
Signed-off-by: Simon Glass <[email protected]>
|
|
On x86 we use CMOS RAM to read and write some settings. Add basic support
for this, including access to registers 128-255.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move the checksum code out into its own file so it can be used elsewhere.
Also use a new version which supports a length which is not a multiple of
2 and add a new function to add two checksums.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add this to the enum so that we can use the various fdtdec functions. A
later commit will move this driver to driver model.
Signed-off-by: Simon Glass <[email protected]>
|
|
This patch adds LPUART support for LS1021ATWR board.
For ls1021atwr_nor_lpuart_defconfig, LPUART is used as the console.
Signed-off-by: Alison Wang <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
This patch adds LPUART support for LS1021AQDS board.
For ls1021aqds_nor_lpuart_defconfig, LPUART is used as the console.
Signed-off-by: Alison Wang <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
This patch adds the CH7301 HDMI options and the common configuration
for DCU on LS1021AQDS board.
Signed-off-by: Xiubo Li <[email protected]>
Signed-off-by: Alison Wang <[email protected]>
Cc: Jason Jin <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
Internal memory controller counters can reach a bad state after
training in DDR4 mode if accumulated ECC or DBI mode is eanbled.
Signed-off-by: York Sun <[email protected]>
|
|
Scrolling a line at a time is very slow for reasons that I don't understand.
It seems to take about 100ms to copy 4MB of RAM in the frame buffer. To cope
with this, scroll 5 lines each time.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add code to the generic pci_rom file to access the VGA ROM in PCI space
when needed.
Signed-off-by: Simon Glass <[email protected]>
|
|
Allow the supported modes to be listed when in debug mode.
Signed-off-by: Simon Glass <[email protected]>
|
|
We shouldn't assume that the VGA ROM can always be loaded at c0000. This
is only true on x86 machines.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Reinhard Arlt <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Josef Wagner <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
These boards are still non-generic boards.
It is a good thing that we can drop board-specific hack code
from drivers/mtd/nand/nand_base.c
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Stefan Roese <[email protected]>
Cc: Andrea "llandre" Marson <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Ira W. Snyder <[email protected]>
|
|
These boards are still non-generic boards:
P1011RDB, P1022RDB, P2010RDB, P2020RDB
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Poonam Aggrwal <[email protected]>
|
|
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Dave Liu <[email protected]>
Cc: Anton Vorontsov <[email protected]>
|
|
|
|
The CPU info is already logged during boot e.g.
CPU: Allwinner A20 (SUN7I)
so the prompt is just one more thing to change for each new SoC, just makes it
"sunxi#" instead.
Signed-off-by: Ian Campbell <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
|
|
|
|
|
|
|
|
Hookup OTG USB controller support and enable the otg controller + USB-keyb
on various tablets.
This allows tablet owners to interact with u-boot without needing to solder
a serial console onto their tablet PCB.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Ian Campbell <[email protected]>
|
|
The file, originally named "include/video/mipi_display.h", is taken from
linux 3.18 (commit b2776bf7149bddd1f4161f14f79520f17fc1d71d).
It provides MIPI DSI constants for DCS commands, which are needed to
implement support for SSD2828 in u-boot.
Signed-off-by: Siarhei Siamashka <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
And also add Kconfig option for selecting ELDO3 voltage. The reason
for having this option is that the Android kernel sets ELDO3 to
1.2V when powering up LCD in the case if 'lcd_if' configuration
variable is set to 6 (LCD_IF_EXT_DSI) in the FEX file. Most likely
to supply power for a SSD2828 chip.
However on the MSI Primo81 tablet, which is using this particular
'lcd_if = 6' setup for LCD, setting the ELDO3 voltage appears to
be unnecessary and it works regardless. Having no schematics of
this tablet, I can only guess that 1.2V is supplied to SSD2828
in some other way.
Signed-off-by: Siarhei Siamashka <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
We will only support loading u-boot.img from SPI flash stored
at the offset of 64k.
Signed-off-by: Christian Gmeiner <[email protected]>
|
|
To support different ddr3 memory sizes we should start using
imx_ddr_size(..) instead of the define PHYS_SDRAM_SIZE.
Signed-off-by: Christian Gmeiner <[email protected]>
|
|
To align with other mx6 boards, change ENV offset from 384KB to
512KB position to fit a larger u-boot image.
Signed-off-by: Ye.Li <[email protected]>
|
|
Since mx6sx's memory space is different to mx6dq, redefine the SPL
related macro for mx6sx chip.
Signed-off-by: Peng Fan <[email protected]>
|
|
Add SPL support in mx6sxsabresd header file.
Signed-off-by: Peng Fan <[email protected]>
|
|
2 recent sunxi changes have removed the usage of lowlevel_init by moving some
code around and then setting CONFIG_SKIP_LOWLEVEL_INIT.
This is problematic for 2 reasons:
1) It does not just stop s_init from being called, it also stops
cpu_init_cp15 from getting called, which is undesirable.
2) We want u-boot.bin to be usable standalone, without SPL, some people e.g.
use an upstream u-boot.bin together with Allwinner's boot0 loader. So
u-boot.bin must (re)initialize the gpios, timer, etc.
This commit restores the lowlevel_init / s_init usage, while keeping the
changes to no longer use the global-data (gd) struct in the SPL.
Signed-off-by: Hans de Goede <[email protected]>
|
|
This patch configures and initializes the L2 switch on T1040rdb board.
The external L2 switch ports may be connected to PHYs only over
QSGMII, for T1040rdb.
Signed-off-by: Codrin Ciubotariu <[email protected]>
|
|
This patch configures and initializes the L2 switch on T1040QDS board.
The L2 switch ports must be initialized according to the SerDes
protocols.
Signed-off-by: Codrin Ciubotariu <[email protected]>
|
|
Signed-off-by: Daniel Schwierzeck <[email protected]>
|
|
Use phys_addr_t for physical address declaration.
It is also unsigned type instead of sign.
Signed-off-by: Michal Simek <[email protected]>
|
|
Added support for zc7035
Signed-off-by: Siva Durga Prasad Paladugu <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
|
|
Set fpga operations to NULL for cases where
FPGA is setup in board file but driver is not added
Signed-off-by: Michal Simek <[email protected]>
|
|
No functional changes.
Signed-off-by: Michal Simek <[email protected]>
|
|
Set fpga operations to NULL for cases where
FPGA is setup in board file but driver is not added
Signed-off-by: Michal Simek <[email protected]>
|
|
Set fpga operations to NULL for cases where
FPGA is setup in board file but driver is not added.
Signed-off-by: Michal Simek <[email protected]>
|
|
Set fpga operations to NULL for cases where
FPGA is setup in board file but driver is not added.
Signed-off-by: Michal Simek <[email protected]>
|
|
SPL needs to detect FPGA device which will be used
for loading bitstream.
Signed-off-by: Michal Simek <[email protected]>
|
