summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2012-09-17nand: consolidate duplicated constantsJoe Hershberger
NAND_CMD_ constants for lock/unlock should be in the header Signed-off-by: Joe Hershberger <[email protected]> Signed-off-by: Scott Wood <[email protected]>
2012-09-17nand: Change ulong to loff_t and size_tJoe Hershberger
Missed in previous cleanup. Signed-off-by: Joe Hershberger <[email protected]> Signed-off-by: Scott Wood <[email protected]>
2012-09-17nand: Add support for unlock.invertJoe Hershberger
NAND unlock command allows an invert bit to be set to unlock all but the selected page range. Signed-off-by: Joe Hershberger <[email protected]> [[email protected]: updated docs and added comment about invert bit] Signed-off-by: Scott Wood <[email protected]>
2012-09-17Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini
2012-09-17Atmel: sam9g10/9m10/9x5: Add support to boot DT kernelBo Shen
The mainline linux kernel is moving to flatten device tree support Add the CONFIG_OF_LIBFDT option to support booting DT linux kernel Signed-off-by: Bo Shen <[email protected]> Signed-off-by: Andreas Bießmann <[email protected]>
2012-09-17mx28evk: extend default environmentOtavio Salvador
The environment has been based on mx53loco and m28evk but keeping the possibility to easy change the default console device as Freescale and mainline kernels differ on the device name. Signed-off-by: Otavio Salvador <[email protected]>
2012-09-17i2c:soft:multi: Enable soft I2C multibus at Trats development boardŁukasz Majewski
This commit enables multibus handling at Samsung's Trats development board. Signed-off-by: Lukasz Majewski <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Cc: Minkyu Kang <[email protected]> Acked-by: Heiko Schocher <[email protected]>
2012-09-17i2c:soft:multi: Support for multiple soft I2C buses at Samsung boardsŁukasz Majewski
Support for multiple soft I2C buses. Multibus I2C support is achieved by defining get_multi_{sda|scl}_pin functions to switch between multiple "soft" I2C buses. Common definition of I2C_X I2C buses is provided at <i2c.h>. TEST HW: Samsung's Exynos4210 evt.0.1 - Trats development board Signed-off-by: Lukasz Majewski <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Cc: Heiko Schocher <[email protected]> Cc: Minkyu Kang <[email protected]> Acked-by: Heiko Schocher <[email protected]>
2012-09-14Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini
2012-09-13Merge branch 'master' of git://git.denx.de/u-boot-avr32Tom Rini
2012-09-13avr32: add atngw100mkii boardAndreas Bießmann
This patch is derived from an older patch provided by atmel in its buildroot-avr32-v3.0.0.tar.bz2 Signed-off-by: Andreas Bießmann <[email protected]> cc: Hans-Christian Egtvedt <[email protected]> Acked-by: Hans-Christian Egtvedt <[email protected]>
2012-09-12Merge branch 'master' of git://www.denx.de/git/u-boot-mmcTom Rini
2012-09-11microblaze: timer: Prepare for device-tree initializationMichal Simek
Fix CONFIG_SYS_HZ usage in board config. Do not use hardcoded value. Use CONFIG_SYS_HZ instead. Separate static configuration to single block. Signed-off-by: Michal Simek <[email protected]>
2012-09-11serial: Support serial multi for MicroblazeMichal Simek
enable serial multi for Microblaze. Signed-off-by: Michal Simek <[email protected]> Acked-by: Stephan Linz <[email protected]>
2012-09-10Tegra: Change Tegra20 to Tegra in common code, prep for T30Tom Warren
Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate. Convert tegra20_ source file and function names to tegra_, also. Upcoming Tegra30 port will use common code/defines/names where possible. Signed-off-by: Tom Warren <[email protected]> Acked-by: Stephen Warren <[email protected]>
2012-09-10MX35: mx35pdk: add support for MMCStefano Babic
Add support for SD card and change the default environment due to increased u-boot size. Signed-off-by: Stefano Babic <[email protected]>
2012-09-10ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, removeAshok Kumar Reddy
unused macro CONFIG_DISCOVER_PHY Signed-off-by: Ashok Kumar Reddy <[email protected]> Acked-by: Stefano Babic <[email protected]>
2012-09-07tegra: put eMMC environment into the boot sectorsStephen Warren
When I set up Tegra's config files to put the environment into eMMC, I assumed that CONFIG_ENV_OFFSET was a linearized address relative to the start of the eMMC device, and spanning HW partitions boot0, boot1, general* and the user area in order. However, it turns out that the offset is actually relative to the beginning of the user area. Hence, the environment block ended up in a different location to expected and documented. Set CONFIG_SYS_MMC_ENV_PART=2 (boot1) to solve this, and adjust CONFIG_ENV_OFFSET to be relative to the start of boot1, not the entire eMMC. Signed-off-by: Stephen Warren <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2012-09-07mmc: detect boot sectors using EXT_CSD_BOOT_MULT tooStephen Warren
Some eMMC devices contain boot partitions, but do not set the PART_SUPPORT bit in EXT_CSD_PARTITIONING_SUPPORT. Allow partition selection on such devices, by enabling partition switching when EXT_CSD_BOOT_MULT is set. Note that the Linux kernel enables access to boot partitions solely based on the value of EXT_CSD_BOOT_MULT; EXT_CSD_PARTITIONING_SUPPORT only influences access to "general" partitions. eMMC devices affected by this issue exist on various NVIDIA Tegra platforms (and presumably many others too), such as Harmony (plug-in eMMC), Seaboard, Springbank, and Whistler (plug-in eMMC). Signed-off-by: Stephen Warren <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2012-09-07tegra: Enable NAND on TECThierry Reding
This commit enables NAND support on the Tamonten Evaluation Carrier and adds the corresponding device tree nodes. Furthermore, the U-Boot environment can now be stored in NAND. Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2012-09-07tegra: enable NAND on HarmonyStephen Warren
Signed-off-by: Stephen Warren <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2012-09-07tegra: Enable NAND on SeaboardSimon Glass
This enables NAND support for the Seaboard. Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2012-09-07tegra: nand: Add Tegra NAND driverJim Lin
A device tree is used to configure the NAND, including memory timings and block/pages sizes. If this node is not present or is disabled, then NAND will not be initialized. Signed-off-by: Jim Lin <[email protected]> Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2012-09-07nand: Try to align the default buffersSimon Glass
The NAND layer needs to use cache-aligned buffers by default. Towards this goal. align the default buffers and their members according to the minimum DMA alignment defined for the architecture. Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Tom Warren <[email protected]> Acked-by: Scott Wood <[email protected]>
2012-09-06mx31: Define default SoC input clock frequenciesBenoît Thébaudeau
Define default SoC input clock frequencies for i.MX31 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Wolfgang Denk <[email protected]> Cc: Helmut Raiger <[email protected]>
2012-09-06mx35: Define default SoC input clock frequenciesBenoît Thébaudeau
Define default SoC input clock frequencies for i.MX35 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau <[email protected]> Cc: Stefano Babic <[email protected]> Acked-by: Stefano Babic <[email protected]>
2012-09-06mx25: Define default SoC input clock frequenciesBenoît Thébaudeau
Define default SoC input clock frequencies for i.MX25 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Matthias Weisser <[email protected]>
2012-09-05mmc: s5p_sdhci: add the set_mmc_clk for cmu controlJaehoon Chung
Samsung SoC use the cmu control to set clock. Signed-off-by: Jaehoon Chung <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Signed-off-by: Andy Fleming <[email protected]>
2012-09-05mmc: Add a SDHCI quirk for boards that have no CDJoe Hershberger
Some boards have no Card Detect wired. In that case, set the CD test bits in the standard interface. Signed-off-by: Joe Hershberger <[email protected]> Signed-off-by: Andy Fleming <[email protected]>
2012-09-05tegra: put eMMC environment into the boot sectorsStephen Warren
When I set up Tegra's config files to put the environment into eMMC, I assumed that CONFIG_ENV_OFFSET was a linearized address relative to the start of the eMMC device, and spanning HW partitions boot0, boot1, general* and the user area in order. However, it turns out that the offset is actually relative to the beginning of the user area. Hence, the environment block ended up in a different location to expected and documented. Set CONFIG_SYS_MMC_ENV_PART=2 (boot1) to solve this, and adjust CONFIG_ENV_OFFSET to be relative to the start of boot1, not the entire eMMC. Signed-off-by: Stephen Warren <[email protected]> Signed-off-by: Andy Fleming <[email protected]>
2012-09-05mmc: detect boot sectors using EXT_CSD_BOOT_MULT tooStephen Warren
Some eMMC devices contain boot partitions, but do not set the PART_SUPPORT bit in EXT_CSD_PARTITIONING_SUPPORT. Allow partition selection on such devices, by enabling partition switching when EXT_CSD_BOOT_MULT is set. Note that the Linux kernel enables access to boot partitions solely based on the value of EXT_CSD_BOOT_MULT; EXT_CSD_PARTITIONING_SUPPORT only influences access to "general" partitions. eMMC devices affected by this issue exist on various NVIDIA Tegra platforms (and presumably many others too), such as Harmony (plug-in eMMC), Seaboard, Springbank, and Whistler (plug-in eMMC). Signed-off-by: Stephen Warren <[email protected]> Signed-off-by: Andy Fleming <[email protected]>
2012-09-05Merge remote-tracking branch 'u-boot-ti/master' into mAlbert ARIBAUD
2012-09-04OMAP3: mt_ventoux: added video supportStefano Babic
Signed-off-by: Stefano Babic <[email protected]>
2012-09-04OMAP3: mt_ventoux: activate GPIO4Stefano Babic
Signed-off-by: Stefano Babic <[email protected]>
2012-09-04OMAP3: tam3517: add function to read MAC from EEPROMStefano Babic
The manufacturer delivers the TAM3517 SOM with 4 MAC address. They are stored on the EEPROM of the SOM. The patch adds a function to get their values and set the ethaddr variables. Signed-off-by: Stefano Babic <[email protected]>
2012-09-04Merge remote-tracking branch 'u-boot-atmel/master' into mAlbert ARIBAUD
2012-09-04Fixes the crippled console output on PortuxG20.Markus Hubig
In order to use the serial interface on the PortuxG20 we need to enable the level converter first by setting the PC9 pin to high. The level converter needs some time to settle so we have to use the mdelay() function to wait for some time. Unfortunately we have no timers available at board_early_init_f() so we enable the serial output early within board_postclk_init(). Now the U-Boot output looks fine: | U-Boot 2012.07-00132-gaf1a3b0-dirty (Aug 16 2012 - 18:21:32) | | CPU: AT91SAM9G20 | Crystal frequency: 18.432 MHz | CPU clock : 396.288 MHz | Master clock : 132.096 MHz | DRAM: 64 MiB | WARNING: Caches not enabled | NAND: 128 MiB | In: serial | Out: serial | Err: serial | Net: macb0 | Hit any key to stop autoboot: 0 Signed-off-by: Markus Hubig <[email protected]> Signed-off-by: Andreas Bießmann <[email protected]>
2012-09-04atmel: eb_cpux9k2: add ram target configurationJens Scharsig
* add ram target for EB+CPUx9k2 board (eb_cpux9k2_ram_config) Signed-off-by: Jens Scharsig <[email protected]> Signed-off-by: Jens Scharsig (BuS Elektronik) <[email protected]> Signed-off-by: Andreas Bießmann <[email protected]>
2012-09-04integrator: break out common configLinus Walleij
The configuration that is common for all Integrator boards may just as well be stored in a common include file as per pattern from other boards. This eases maintenance quite a bit. Signed-off-by: Linus Walleij <[email protected]>
2012-09-04SCSPS1: Enable cachesMarek Vasut
Enable caches, make it faster! Signed-off-by: Marek Vasut <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Detlev Zundel <[email protected]>
2012-09-04mx28evk: Add USB Ethernet supportFabio Estevam
Add USB Ethernet support. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Marek Vasut <[email protected]>
2012-09-04M28: Fix the use of gpmi-nand in mtdpartsMarek Vasut
The mtd name of the NAND in Linux is "gpmi-nand", not "gpmi-nand.0" as it would be expected, since the controller doesn't support multiple NANDs attached to it as of now. Rectify this flub by adjusting default mtdparts. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Otavio Salvador <[email protected]> Acked-by: Stefano Babic <[email protected]>
2012-09-04MX28: mx28evk: Enable SPI DMAOtavio Salvador
Signed-off-by: Otavio Salvador <[email protected]>
2012-09-03arm/km: remove unused codeHolger Brunck
For some reasons we had an own implementaion of dram_init and dram_init_banksize. This is not needed anymore, use the standard kirkwood functions instead. Signed-off-by: Holger Brunck <[email protected]> cc: Prafulla Wadaskar <[email protected]> cc: Valentin Longchamp <[email protected]> cc: Gerlando Falauto <[email protected]> Acked-By: Prafulla Wadaskar <[email protected]>
2012-09-03arm/km: fix frequency of the SPI NOR FlashValentin Longchamp
According to our last HW measures, this could be raised while still compatible with the potential delays on the lines. Signed-off-by: Valentin Longchamp <[email protected]> cc: Holger Brunck <[email protected]> Acked-By: Prafulla Wadaskar <[email protected]>
2012-09-03km/arm: set SPI NOR Flash default parametersValentin Longchamp
These parameters are used by the the sf probe command that are used by our update script and they therefore need to be set for all of our boards. The timing is the same as for the ENV SPI NOR Flash (since it's the same physical device) and takes the boco2 delay on the bus into account. Signed-off-by: Valentin Longchamp <[email protected]> cc: Holger Brunck <[email protected]> Acked-by: Prafulla Wadaskar <[email protected]>
2012-09-03edminiv2: orion5x: fix GPIO inits and valuesAlbert ARIBAUD
Orion5x did not actually write GPIO output values or input polarities, and ED Mini V2 had bad or missing values for GPIO settings. Signed-off-by: Albert ARIBAUD <[email protected]> Acked-By: Prafulla Wadaskar <[email protected]>
2012-09-03cfi: Make the flash erase and write operations abortableJoe Hershberger
Check for ctrlc() in operations that take time and loop over the flash addresses. In netconsole, tstc() is expensive. Only check once in a while to not slow down the operation significantly. Signed-off-by: Joe Hershberger <[email protected]> Signed-off-by: Stefan Roese <[email protected]>
2012-09-02mmc: Remove unused item flags in struct mmc_cmdKaspter Ju
Signed-off-by: Kaspter Ju <[email protected]>
2012-09-02Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk
* 'master' of git://git.denx.de/u-boot-usb: MUSB driver: Timeout is never detected as the while loop does not end usb: fix ulpi_set_vbus prototype pxa25x: Add UDC registers definitions USB: Fix strict aliasing in ohci-hcd usb: Optimize USB storage read/write ehci: Optimize qTD allocations usb_stor_BBB_transport: Do not delay when not required usb_storage: Remove EHCI constraints usb_storage: Restore non-EHCI support ehci-hcd: Boost transfer speed ehci: cosmetic: Define used constants ehci: Fail for multi-transaction interrupt transfers arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS arm:trats: Support for USB UDC driver at TRATS board. dfu:cmd: Support for DFU u-boot command dfu: MMC specific routines for DFU operation dfu: DFU backend implementation dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget dfu:usb: Support for g_dnl composite download gadget. ehci: cosmetic: Define the number of qt_buffers Signed-off-by: Wolfgang Denk <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-06-29 05:21:14 +0000