summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2011-07-04MX53: Add initial support for MX53ARDFabio Estevam
Signed-off-by: Fabio Estevam <[email protected]>
2011-07-04arm: Update jadecpu boardMatthias Weisser
Enable dcache and arch memset/memcpy for speed reasons Remove of config.mk and some environment overwrites Some generic cleanup Signed-off-by: Matthias Weisser <[email protected]>
2011-07-04arm: omap2: apollon: fix broken buildIgor Grinberg
Define CONFIG_SYS_SDRAM_BASE to physical SDRAM address and CONFIG_SYS_INIT_SP_ADDR to physical SRAM address Signed-off-by: Igor Grinberg <[email protected]> Cc: Kyungmin Park <[email protected]>
2011-07-04arm: Tegra2: GPIO: enable GPIO for Tegra2 boardsTom Warren
Signed-off-by: Tom Warren <[email protected]>
2011-07-04VCMA9: various cleanups/code style fixesDavid Müller (ELSOFT AG)
Signed-off-by: David Müller <[email protected]>
2011-07-04VCMA9: use CFI driver (and remove the old one)David Müller (ELSOFT AG)
Signed-off-by: David Müller <[email protected]>
2011-07-04VCMA9: remove unneeded config.mkDavid Müller (ELSOFT AG)
Signed-off-by: David Müller <[email protected]>
2011-07-04armv7: adapt omap4 to the new cache maintenance frameworkAneesh V
adapt omap4 to the new layered cache maintenance framework Signed-off-by: Aneesh V <[email protected]>
2011-07-04armv7: rename cache related CONFIG flagsAneesh V
Replace the cache related CONFIG flags with more meaningful names. Following are the changes: CONFIG_L2_OFF -> CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_NO_ICACHE -> CONFIG_SYS_ICACHE_OFF CONFIG_SYS_NO_DCACHE -> CONFIG_SYS_DCACHE_OFF Signed-off-by: Aneesh V <[email protected]> V2: * Changed CONFIG_L2_OFF -> CONFIG_SYS_NO_L2CACHE V4: * Changed all three flags to the final names suggested as above and accordingly changed the commit message
2011-07-04armv7: cache maintenance operations for armv7Aneesh V
- Add a framework for layered cache maintenance - separate out SOC specific outer cache maintenance from maintenance of caches known to CPU - Add generic ARMv7 cache maintenance operations that affect all caches known to ARMv7 CPUs. For instance in Cortex-A8 these opertions will affect both L1 and L2 caches. In Cortex-A9 these will affect only L1 cache - D-cache operations supported: - Invalidate entire D-cache - Invalidate D-cache range - Flush(clean & invalidate) entire D-cache - Flush D-cache range - I-cache operations supported: - Invalidate entire I-cache - Add maintenance functions for TLB, branch predictor array etc. - Enable -march=armv7-a so that armv7 assembly instructions can be used Signed-off-by: Aneesh V <[email protected]>
2011-07-01nand_util: drop trailing all-0xff pages if requestedBen Gardiner
Add a flag to nand_read_skip_bad() such that if true, any trailing pages in an eraseblock whose contents are entirely 0xff will be dropped. The implementation is via a new drop_ffs() function which is based on the function of the same name from the ubiformat utility by Artem Bityutskiy. This is as-per the reccomendations of the UBI FAQ [1] [1] http://www.linux-mtd.infradead.org/doc/ubi.html#L_flasher_algo Signed-off-by: Ben Gardiner <[email protected]> CC: Artem Bityutskiy <[email protected]> Acked-by: Detlev Zundel <[email protected]> CC: Scott Wood <[email protected]> Signed-off-by: Scott Wood <[email protected]>
2011-07-01nand_util: treat WITH_YAFFS_OOB as a modeBen Gardiner
When specified in the flags argument of nand_write, WITH_YAFFS_OOB causes an operation which is mutually exclusive with the 'usual' way of writing. Add a check that client code does not specify WITH_YAFFS_OOB along with any other flags and add a comment indicating that the WITH_YAFFS_OOB flag should not be mixed with other flags. Signed-off-by: Ben Gardiner <[email protected]> CC: Scott Wood <[email protected]> Signed-off-by: Scott Wood <[email protected]>
2011-07-01nand_util: convert nand_write_skip_bad() to flagsBen Gardiner
In a future commit the behaviour of nand_write_skip_bad() will be further extended. Convert the only flag currently passed to the nand_write_ skip_bad() function to a bitfield of only one allocated member. This should avoid an explosion of int's at the end of the parameter list or the ambiguous calls like nand_write_skip_bad(info, offset, len, buf, 0, 1, 1); nand_write_skip_bad(info, offset, len, buf, 0, 1, 0); Instead there will be: nand_write_skip_bad(info, offset, len, buf, WITH_YAFFS_OOB | WITH_OTHER); Signed-off-by: Ben Gardiner <[email protected]> Acked-by: Detlev Zundel <[email protected]> Signed-off-by: Scott Wood <[email protected]>
2011-06-27Minor coding style fixes.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2011-06-23Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: run arm_pci_init after relocation IXP42x PCI rewrite update/fix PDNB3 board update/fix IXDP425 / IXDPG425 boards add dvlhost (dLAN 200 AV Wireless G) board IXP NPE: add support for fixed-speed MII ports update/fix AcTux4 board update/fix AcTux3 board update/fix AcTux2 board update/fix AcTux1 board use -ffunction-sections / --gc-sections on IXP42x support CONFIG_SYS_LDSCRIPT on ARM fix "depend" target in npe directory Fix IXP code to work after relocation was added trigger hardware watchdog in IXP42x serial driver add support for IXP42x Rev. B1 and newer add XScale sub architecture (IXP/PXA) to maintainer list Conflicts: arch/arm/lib/board.c Signed-off-by: Wolfgang Denk <[email protected]>
2011-06-23update/fix PDNB3 boardMichael Schwingen
Signed-off-by: Michael Schwingen <[email protected]>
2011-06-23update/fix IXDP425 / IXDPG425 boardsMichael Schwingen
Signed-off-by: Michael Schwingen <[email protected]>
2011-06-23add dvlhost (dLAN 200 AV Wireless G) boardMichael Schwingen
Signed-off-by: Michael Schwingen <[email protected]>
2011-06-23update/fix AcTux4 boardMichael Schwingen
Signed-off-by: Michael Schwingen <[email protected]>
2011-06-23update/fix AcTux3 boardMichael Schwingen
Signed-off-by: Michael Schwingen <[email protected]>
2011-06-23update/fix AcTux2 boardMichael Schwingen
Signed-off-by: Michael Schwingen <[email protected]>
2011-06-23update/fix AcTux1 boardMichael Schwingen
Signed-off-by: Michael Schwingen <[email protected]>
2011-06-22ARM: drop unsupported 'trab' boardWolfgang Denk
The 'trab' board configuration is broken, and there is nobody who is interested and willing to fix it. Drop it. This includes support for VFD displays which have always been used by this board only. Signed-off-by: Wolfgang Denk <[email protected]>
2011-06-21Build fix/update of AFEB9260Sergey Lapin
Make AFEB9260 build again. Based on fix for AT91SAM9260EK. Signed-off-by: Sergey Lapin <[email protected]>
2011-06-21cpu9260/9G20: fix board supportEric Benard
Signed-off-by: Eric Bénard <[email protected]>
2011-06-21AT91 rework: fix TOP9000 files to build againReinhard Meyer
Fix EMK TOP9000 board to build again: - changes required due to ATMEL rework Signed-off-by: Reinhard Meyer <[email protected]>
2011-06-21AT91 rework: fix at91sam(9260/9g20/9xe)ek board port to build again:Reinhard Meyer
Make ATMEL's at91sam9260/9g20/9xe-ek boards build again Signed-off-by: Reinhard Meyer <[email protected]>
2011-06-21Add support for Bluewater Systems Snapper 9260/9G20 modulesRyan Mallon
Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20 single board computer modules. Includes NAND flash and Ethernet support. Signed-off-by: Ryan Mallon <[email protected]>
2011-06-21update arm/at91rm9200 work with rework rework110202Jens Scharsig
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme * Fix: timer.c compile error io.h not found with arm/at91rm9200 * update arm920t/at91 to ATMEL_xxx name scheme * update arm920t/at91 soc lib * update at91_emac driver Signed-off-by: Jens Scharsig <[email protected]> Tested-by: Andreas Bießmann <[email protected]>
2011-06-21mx31pdk: Add DHCP commandFabio Estevam
Signed-off-by: Fabio Estevam <[email protected]>
2011-06-21imx31_phycore: Fix build by using new relocation schemeFabio Estevam
Signed-off-by: Fabio Estevam <[email protected]>
2011-06-21mx1ads: Fix build by using new relocation schemeFabio Estevam
Signed-off-by: Fabio Estevam <[email protected]>
2011-06-21MX31: QONG: drop config.mkStefano Babic
Remove obsolete config.mk from QONG board. Signed-off-by: Stefano Babic <[email protected]>
2011-06-21omap730p2: fix build breaksAneesh V
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-06-21omap2420h4: fix build breaksAneesh V
DRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-06-21omap1610inn: fix build breaksAneesh V
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-06-21omap1510inn: fix build breaksAneesh V
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-06-21omap5912osk: fix build breaksAneesh V
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-06-21omap1610h2: fix build breaksAneesh V
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-06-08Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: SMDK6400: fix the compiler error imx27lite: Remove local config.mk mx31ads: Fix environment location on flash imx31_litekit: Remove local config.mk mx31litekit: Fix boot with the new relocation scheme. mx31ads: Use the new relocation scheme
2011-06-07imx27lite: Remove local config.mkFabio Estevam
Local board config.mk should be avoided. Place CONFIG_SYS_TEXT_BASE definition into the board config file instead. Signed-off-by: Fabio Estevam <[email protected]>
2011-06-07mx31ads: Fix environment location on flashFelix Radensky
At the moment u-boot and u-boot environment on flash have overlapping addresses, so each u-boot update erases the environment. Fix this by placing evironment right after u-boot. Also, remove confusing comment about environment location. Signed-off-by: Felix Radensky <[email protected]>
2011-06-07imx31_litekit: Remove local config.mkFabio Estevam
Local board config.mk should be avoided. Place CONFIG_SYS_TEXT_BASE definition into the board config file instead. Signed-off-by: Fabio Estevam <[email protected]> Acked-by: Stefano Babic <[email protected]>
2011-06-06mx31litekit: Fix boot with the new relocation scheme.Fabio Estevam
imx31_litekit has been converted to the new relocation scheme, but it does not boot. Make the boot functional by using board_early_init_f . Signed-off-by: Fabio Estevam <[email protected]> Tested-by: Magnus Lilja <[email protected]>
2011-06-06mx31ads: Use the new relocation schemeFabio Estevam
This fixes the MX31ADS build by using the new relocation scheme. Signed-off-by: Fabio Estevam <[email protected]> Tested-by: Felix Radensky <[email protected]>
2011-06-03Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update embedded env settingsHarald Krapfenbauer
The recent commit ea882baf9c1 broke embedding environments in the middle of a sector, so relocate it to the start of the 2nd sector. Signed-off-by: Harald Krapfenbauer <[email protected]> Signed-off-by: Mike Frysinger <[email protected]>
2011-06-03Blackfin: bf548-ezkit/bf561-ezkit: update env locationMike Frysinger
Relocate the env to one of the small end sectors to avoid issues with embedding it, such as support being broken (by recent commit ea882baf9c1), and for taking a while to save updates. Signed-off-by: Mike Frysinger <[email protected]>
2011-06-01armv7: Add support for ST-Ericsson U8500 href platformJohn Rigby
Minimal platform support to boot linux from SD. Supported devices/hw limited to external MMC/SD slot, GPIO, I2C and minimal PRCMU. Signed-off-by: John Rigby <[email protected]> CC: Albert Aribaud <[email protected]>
2011-05-31Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPTAlbert ARIBAUD
2011-05-31arm/km: update mgcoge3un board supportHolger Brunck
We change default settings for egiga on mgcoge3un. The reason we need this is that we have the gig port on mgcoge3un connected using a back-to-back pair of PHYs. There are no magnetics and because of that the port has to be run with a fixd configuration and auto-negotiation must be disabled. In the default mode the egiga driver uses autoneg to determine port speed - which defaults to 1G (we need 100M full duplex). Add wait for the GPIO line connected to mgcoge3ne before starting mgcoge3un. A board specific ethernet present function was added, because on this board ethernet is always present. The BOCO FPGA access was enhanced and changed to use register definitions. Signed-off-by: Holger Brunck <[email protected]> Signed-off-by: Valentin Longchamp <[email protected]> Acked-by: Heiko Schocher <[email protected]> cc: Wolfgang Denk <[email protected]> cc: Detlev Zundel <[email protected]> cc: Prafulla Wadaskar <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-02 12:25:44 +0000