summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2010-05-07serial: punt unused serial_addr()Mike Frysinger
Only one file apparently defines this function, and it merely stubs it out. So if no one is defining/calling it, punt it. Signed-off-by: Mike Frysinger <[email protected]>
2010-05-07update include/asm/ gitignore after moveMike Frysinger
With the cpu include paths moved, the gitignore paths need updating. Signed-off-by: Mike Frysinger <[email protected]> Tested-by: Tom Rix <[email protected]>
2010-05-06compiler.h: add uint typedefMike Frysinger
Recent crc changes started using the "uint" type in headers that are used on the build system. This subsequently broke mingw targets as they do not provide such a type. So add this basic typedef to compiler.h so that we do not have to worry about this breaking again in the future. Signed-off-by: Mike Frysinger <[email protected]>
2010-05-0674xx_7xx: CPCI750: Add ECC support on esd CPCI-CPU/750 boardReinhard Arlt
Add ECC support for DDR RAM for MV64360 on esd CPCI-CPU/750 board. This patch also adds the "pldver" command to display the CPLD revision. Signed-off-by: Reinhard Arlt <[email protected]> Signed-off-by: Stefan Roese <[email protected]>
2010-05-06eNET: Implement eNET WatchdogGraeme Russ
Signed-off-by: Graeme Russ <[email protected]>
2010-05-06eNET: Use SC520 MMCR to reset eNET boardGraeme Russ
Signed-off-by: Graeme Russ <[email protected]>
2010-05-06eNET: Add support for onboard RTL8100B (RTL8139) chipsGraeme Russ
Signed-off-by: Graeme Russ <[email protected]>
2010-05-06eNET: Fix CONFIG_SYS_HZ to be 1000Graeme Russ
The clock interupt has always been 1kHz as per timer_init() in /arch/i386/cpu/sc520/sc520_timer.c Signed-off-by: Graeme Russ <[email protected]>
2010-05-06eNET: Fix Flash WriteGraeme Russ
Onboard AMD Flash chip does not support buffered writes Signed-off-by: Graeme Russ <[email protected]>
2010-05-06x86: Fix support for booting bzImageGraeme Russ
Add support for newer (up to 2.6.33) kernels Add zboot command which takes the address of a bzImage as its first argument and (optionally) the size of the bzImage as the second argument (the second argument is needed for older kernels which do not include the bzImage size in the header) Signed-off-by: Graeme Russ <[email protected]>
2010-05-06x86: Use CONFIG_SERIAL_MULTIGraeme Russ
Signed-off-by: Graeme Russ <[email protected]>
2010-05-05allow print_size to print large numbers on 32-bit systemsTimur Tabi
Modify print_size() so that it can accept numbers larger than 4GB on 32-bit systems. Add support for display terabyte, petabyte, and exabyte sizes. Change the output to use International Electrotechnical Commission binary prefix standard. Signed-off-by: Timur Tabi <[email protected]>
2010-05-05Add SPI support to mx51evk boardStefano Babic
The patch adds SPI devices to the mx51evk board. The MC13892 chip (PMIC) is supported. Signed-off-by: Stefano Babic <[email protected]>
2010-05-05MX: Added definition file for MC13892Stefano Babic
The MC13892 is a Power Controller used with processors of the family MX.51. The file adds definitions to be used to setup the internal registers via SPI. Signed-off-by: Stefano Babic <[email protected]>
2010-05-05MX31: Add support for PMIC to the QONG moduleStefano Babic
Add support for the PMIC (MC13783) controller and enables charging of the RTC battery. Signed-off-by: Stefano Babic <[email protected]>
2010-05-05MX: RTC13783 uses general function to access PMICStefano Babic
The RTC is part of the Freescale's PMIC controller. Use general function to access to PMIC internal registers. Signed-off-by: Stefano Babic <[email protected]> Tested-by: Magnus Lilja <[email protected]>
2010-05-05MX: Added Freescale Power Management DriverStefano Babic
The patch add supports for the Freescale's Power Management Controller (known as Atlas) used together with i.MX31/51 processors. It was tested with a MC13783 (MX31) and MC13892 (MX51). Signed-off-by: Stefano Babic <[email protected]>
2010-05-05i.MX31: Activate NAND support for i.MX31 Litekit board.Magnus Lilja
Signed-off-by: Magnus Lilja <[email protected]>
2010-05-04configs: remove unused CONFIG_COMMAND_HISTORYKim Phillips
$ git grep CONFIG_COMMAND_HISTORY CHANGELOG: CONFIG_COMMAND_HISTORY include/configs/AP1000.h:#define CONFIG_COMMAND_HISTORY 1 include/configs/keymile-common.h:#define CONFIG_COMMAND_HISTORY 1 include/configs/manroland/common.h:#define CONFIG_COMMAND_HISTORY 1 $ Signed-off-by: Kim Phillips <[email protected]> Acked-by: Heiko Schocher <[email protected]>
2010-05-04Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2010-05-04Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2010-05-03Program net device MAC addresses after initializingBen Warren
Add a new function to the eth_device struct for programming a network controller's hardware address. After all network devices have been initialized and the proper MAC address for each has been determined, make a device driver call to program the address into the device. Only device instances with valid unicast addresses will be programmed. Signed-off-by: Ben Warren <[email protected]> Acked-by: Detlev Zundel <[email protected]> Tested-by: Prafulla Wadaskar <[email protected]> Tested-by: Heiko Schocher <[email protected]> Tested-by: Thomas Chou <[email protected]>
2010-05-03net: add altera triple speeds ethernet mac driverThomas Chou
This driver supports the Altera triple speeds 10/100/1000 ethernet mac. Signed-off-by: Thomas Chou <[email protected]> Signed-off-by: Ben Warren <[email protected]>
2010-05-03net: add opencore 10/100 ethernet mac driverThomas Chou
This patch ports the opencore 10/100 ethernet mac driver ethoc.c from linux kernel to u-boot. Signed-off-by: Thomas Chou <[email protected]> Signed-off-by: Ben Warren <[email protected]>
2010-05-01Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/masterWolfgang Denk
2010-04-30pm9263 converted to at91 soc accessAsen Dimov
Signed-off-by: Asen Dimov <[email protected]>
2010-04-30MX31: Add UBI support to QONG moduleStefano Babic
The UBI/UBIFS support is added to the QONG module. Signed-off-by: Stefano Babic <[email protected]>
2010-04-30MX31: Add support for NAND to QONG boardStefano Babic
The NAND device is connected to the FPGA of the QONG board and not to the NFC controller. For this reason, the FPGA must be set and initialized before accessing to the NAND itself. Signed-off-by: Stefano Babic <[email protected]>
2010-04-30configs/openrd_base.h: reordered macrosFrans Meulenbroeks
moved CONFIG_CMD_FAT to filesystem section swapped CONFIG_CMD_NAND and CONFIG_CMD_MII so they are alpha correct Signed-off-by: Frans Meulenbroeks <[email protected]>
2010-04-30configs/sheevaplug: added a few additional commandsFrans Meulenbroeks
This patch includes a few additional commands in the sheevaplug version of u-boot: - support for LONGHELP so you can get help messages - auto completion and command editing - ubi and mii support - ext2 filesystem (convenient if you have an ext2 from which you want to boot) - jffs2 and ubifs filesystems (if you want to use these in NAND) This also makes it more similar to openrd client. Side effect of this patch is that the code now needs 3 sectors i.s.o. 2 so an existing env is overwritten Signed-off-by: Frans Meulenbroeks <[email protected]>
2010-04-30Marvell GuruPlug Board SupportSiddarth Gore
GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: Siddarth Gore <[email protected]>
2010-04-30Moved board specific values in config fileStefano Babic
The lowlevel_init file contained some hard-coded values to setup the RAM. These board related values are moved into the board configuration file. Signed-off-by: Stefano Babic <[email protected]>
2010-04-30arm, i.mx27: add support for magnesium board from projectiondesignHeiko Schocher
This patch adds support for the magnesium board from projectiondesign. This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND flash, FEC ethernet controller integrated into i.MX27. As this port is based on the imx27lite port, common config options are collected in include/configs/imx27lite-common.h Signed-off-by: Heiko Schocher <[email protected]>
2010-04-30SAMSUNG: serial: modify name from s5pc1xx to s5pMinkyu Kang
Because of other s5p series SoC will use these serial functions, modify function's name and structure's name. Signed-off-by: Minkyu Kang <[email protected]>
2010-04-30pm9263: remove CONFIG_CMD_AUTOSCRIPTAsen Dimov
Signed-off-by: Asen Dimov <[email protected]>
2010-04-30pm9261: remove CONFIG_CMD_AUTOSCRIPTAsen Dimov
Signed-off-by: Asen Dimov <[email protected]>
2010-04-30pm9261 converted to at91 soc accessAsen Dimov
Signed-off-by: Asen Dimov <[email protected]>
2010-04-29ppc4xx: Fix APC405 build breakageStefan Roese
This patch fixes APC405 build, by defining CONFIG_PPC4XX_I2C. This is needed since the move of the PPC4xx I2C driver into the drivers/i2c directory. Signed-off-by: Stefan Roese <[email protected]> Cc: Matthias Fuchs <[email protected]>
2010-04-29ppc4xx: Add support for ICON board (PPC440SPe)Stefan Roese
This patch adds support for the Mosaix Technologies, Inc. ICON board, based on the AppliedMicro (AMCC) PPC440SPe. It's equipped with an SODIMM (512MB standard) and 64MByte of NOR FLASH. Support for the onboard SM502 will be added later. Signed-off-by: Stefan Roese <[email protected]>
2010-04-28QONG: Adapt flash addresses and mtdparts to grown image sizeWolfgang Denk
Also enable HUSH shell. Signed-off-by: Wolfgang Denk <[email protected]>
2010-04-28Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk
2010-04-28Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk
2010-04-27MX31: Added LCD support for QONG moduleStefano Babic
Added support for LCD and splash image to the QONG module. The supported display is VBEST-VGG322403. Signed-off-by: Stefano Babic <[email protected]>
2010-04-27Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk
2010-04-27Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2010-04-27Merge branch 'next' of git://git.denx.de/u-boot-niosWolfgang Denk
2010-04-2685xx/socrates: Remove NFS support to fit image size.Detlev Zundel
This fixes an overflow during the link phase. Signed-off-by: Detlev Zundel <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2010-04-24nios2: add nios2-generic boardThomas Chou
This is a generic approach to port u-boot for nios2 boards. You may find the usage of this approach on the nioswiki, http://nioswiki.com/DasUBoot A fpga parameter file, which contains base address information and drivers declaration, is generated from Altera's hardware system description sopc file using tools. The example fpga parameter file is compatible with EP1C20, EP1S10 and EP1S40 boards. So these boards can be removed after this commit. Though epcs controller is removed to cut the dependency of altera_spi driver. Signed-off-by: Thomas Chou <[email protected]> Signed-off-by: Scott McNutt <[email protected]>
2010-04-24mpc5121: pdm360ng: add coprocessor POSTAnatolij Gustschin
Adds coprocessor communication POST code Signed-off-by: Anatolij Gustschin <[email protected]>
2010-04-24mpc5121: add support for PDM360NG boardAnatolij Gustschin
PDM360NG is a MPC5121E based board by ifm ecomatic gmbh. Signed-off-by: Michael Weiss <[email protected]> Signed-off-by: Detlev Zundel <[email protected]> Signed-off-by: Anatolij Gustschin <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-04 19:57:39 +0000