summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-01-24arm: zynq: Enable CONFIG_REMAKE_ELFSiva Durga Prasad Paladugu
This patch enables CONFIG_REMAKE_ELF for Zynq platform so that it generates u-boot.elf from binary which works for all Zynq boards with OF_SEPARATE option enabled. Signed-off-by: Siva Durga Prasad Paladugu <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2019-01-23MSCC: Add support for Serval SoC family.Horatiu Vultur
As Ocelot, Servalt, Luton and Jaguar2, this family of SoCs are found in Microsemi Switches solution. Signed-off-by: Horatiu Vultur <[email protected]> Reviewed-by: Daniel Schwierzeck <[email protected]>
2019-01-21Merge git://git.denx.de/u-boot-marvellTom Rini
- Sync Armada-38x dts with Linux 4.20 from Chris - Misc changes and enhancements to Turris Mox (v4) from Marek - Reserve PSCI area for Armada 8k from Heinrich - New Allied Telesis x530 board (Armada-385) from Chris - Misc minor changes (defconfig etc)
2019-01-21ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to KconfigDerald D. Woods
This commit converts the following items to Kconfig: CONFIG_ATMEL_NAND_HWECC CONFIG_ATMEL_NAND_HW_PMECC CONFIG_PMECC_CAP CONFIG_PMECC_SECTOR_SIZE CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER [PMECC References] https://www.at91.com/linux4sam/bin/view/Linux4SAM/PmeccConfigure https://www.at91.com/linux4sam/bin/view/Linux4SAM/AT91Bootstrap [Mailing List Thread] https://lists.denx.de/pipermail/u-boot/2018-December/350666.html Fixes: 5541543f ("configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment") [trini: Make the migration be size neutral and possibly not fix the above in all cases] Reported-by: Daniel Evans <[email protected]> Cc: Eugen Hristev <[email protected]> Signed-off-by: Derald D. Woods <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2019-01-21ARM: mvebu: add support for Allied Telesis x530Chris Packham
This is a range of stackable network switches. The SoC is Armada-385 and there are a number of variants with differing network port configurations. The DP variants are intended for a harsher operating environment so they use a different i2c mux and fit industrial-temp parts. Signed-off-by: Chris Packham <[email protected]> Signed-off-by: Stefan Roese <[email protected]>
2019-01-21arm: mvebu: configs: turris_mox: Add 64 MiB of boot memoryMarek Behún
This is needed for some scenarios, such as booting large FIT image. Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Stefan Roese <[email protected]> Signed-off-by: Stefan Roese <[email protected]>
2019-01-19Kconfig: Migrate BOUNCE_BUFFERPhilipp Tomsich
The bounce buffer is used by a few drivers (most of the MMC drivers) to overcome limitations in their respective DMA implementation. This moves the configuration to Kconfig and makes it user-selectable (even though it will be a required feature to make those drivers work): the expected usage is for drivers depending on this to 'select' it unconditionally from their respective Kconfig (see follow-up patches). This commit includes a full migration using moveconfig.py to ensure that each commit compiles. To ensure bisectability we update dependencies of various drivers to now select BOUNCE_BUFFER when needed. [trini: Squash all patches to ensure bisectability] Signed-off-by: Tom Rini <[email protected]> Signed-off-by: Philipp Tomsich <[email protected]> Reviewed-by: Otavio Salvador <[email protected]> [dw_mmc portion] Reviewed-by: Fabio Estevam <[email protected]> [mxsmmc portion] Reviewed-by: Simon Glass <[email protected]> [tegra portion]
2019-01-18Merge tag 'fsl-qoriq-for-v2019.04-rc1' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
Add TFA boot flow for more boards Add TFA boot defconfig for ls1088a and ls2088a. Add dts fixup for PCIe endpoint and root complex.
2019-01-18sunxi: usb: Switch to Generic host controllersJagan Teki
Onc of key blocker for using USB Generic host controller drivers in Allwinner are CLK and RESET drivers, now these available for USB usage. So switch sunxi USB use EHCI and OHCI Generic controllers. Enabling USB is wisely a board choise, So Enable USB_OHCI_HCD where it already have USB_EHCI_HCD Signed-off-by: Jagan Teki <[email protected]> Acked-by: Maxime Ripard <[email protected]>
2019-01-18reset: Add reset validJagan Teki
Add reset_valid to check whether given reset is valid or not. Cc: Simon Glass <[email protected]> Signed-off-by: Jagan Teki <[email protected]>
2019-01-18sunxi: A64: Update sun50i-a64-ccu.hJagan Teki
Update sun50i-a64-ccu.h from the Linux sunxi/dt64-for-4.20 tree: commit 679294497be31596e1c9c61507746d72b6b05f26 Author: Rodrigo Exterckötter Tjäder <[email protected]> Date: Wed Sep 26 19:48:24 2018 +0000 arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay This should be a part of previous sync patch from commit 1b39a1834ed182bbd8036a5cd74a9ea111fa4691 Author: Andre Przywara <[email protected]> Date: Mon Oct 29 00:56:47 2018 +0000 sunxi: A64: Update .dts/.dtsi files Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Andre Przywara <[email protected]>
2019-01-18ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3Jagan Teki
Update all A80 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commits. arch/arm/boot/dts/sun9i-a80*: commit 190e3138f9577885691540dca59c2f07540bde04 Merge: cafc87023b0d a7affb13b271 Author: Arnd Bergmann <[email protected]> Date: Tue Mar 27 14:58:00 2018 +0200 Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt include/dt-bindings/*/sun9i-a80-*: commit 783ab76ae553abc23f80ef7511052d055697531b Author: Chen-Yu Tsai <[email protected]> Date: Sat Jan 28 20:22:36 2017 +0800 clk: sunxi-ng: Add A80 Display Engine CCU Note: sun9i-a80-cx-a99.dts is updated only uart0, since the same dts is not available in Linux. Signed-off-by: Jagan Teki <[email protected]>
2019-01-18adding saveenv-command for bananapi r2Frank Wunderlich
bananapi r2 can be booted from sd-card and emmc saving the environment have to choose the storage from which the device has booted also the offset is set to 1MB to make sure env is written to block "user data area" between uboot and first partition https://www.fw-web.de/dokuwiki/lib/exe/fetch.php?cache=&media=bpi-r2:boot-structure.png Signed-off-by: Frank Wunderlich <[email protected]>
2019-01-17Merge tag 'mips-pull-2019-11-16' of git://git.denx.de/u-boot-mipsTom Rini
- MIPS: mscc: various enhancements for Luton and Ocelot platforms - MIPS: mscc: added support for Jaguar2 platform - MIPS: optimised SPL linker script - MIPS: bcm6368: fix restart flow issues - MIPS: fixed CONFIG_OF_EMBED warnings for all MIPS boards - MIPS: mt7688: small fixes and enhancements - mmc: compile-out write support if disabled
2019-01-17fsl-layerscape: dpaa: fix fsl-mc status in fdt with bootefiMian Yousaf Kaukab
fsl-mc lazyapply command applies dpl from efi_exit_boot_services(). Status of fsl-mc node in working fdt is updated at this stage. However, an efi application like grub may already have copied the fdt. So the updates to fdt done at efi_exit_boot_services() may not be visible to the OS. Fix it by updating fdt earlier if fsl-mc lazyapply command is used. Fixes: b7b8410a8f (ls2080: Exit dpaa only right before exiting U-Boot) Signed-off-by: Mian Yousaf Kaukab <[email protected]> Reviewed-by: York Sun <[email protected]>
2019-01-17env: fix allow to build multiple environmentsRajesh Bhagat
Patch fixes build error when enabling CONFIG_ENV_IS_IN_SPI_FLAS and CONFIG_ENV_IS_IN_MMC at the same time mentioned issue in below link: Refer: https://lists.denx.de/pipermail/u-boot/2018-February/319565.html build error when enabling CONFIG_ENV_IS_IN_SPI_FLASH and CONFIG_ENV_IS_IN_MMC at the same time. Signed-off-by: Rajesh Bhagat <[email protected]> Reviewed-by: York Sun <[email protected]>
2019-01-17armv8: ls2088aqds: Add TFABOOT supportRajesh Bhagat
TFABOOT support includes: - ls2088aqds_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT Signed-off-by: Pankit Garg <[email protected]> Signed-off-by: Ruchika Gupta <[email protected]> Signed-off-by: Rajesh Bhagat <[email protected]> Reviewed-by: York Sun <[email protected]>
2019-01-17armv8: ls2088ardb: Add TFABOOT supportRajesh Bhagat
TFABOOT support includes: - ls2088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - define BOOTCOMMAND for TFABOOT - remove EL3 specific erratas for TFABOOT Signed-off-by: Pankit Garg <[email protected]> Signed-off-by: Ruchika Gupta <[email protected]> Signed-off-by: Rajesh Bhagat <[email protected]> Reviewed-by: York Sun <[email protected]>
2019-01-17armv8: ls1088aqds: Add TFABOOT supportPankit Garg
TFABOOT support includes: - ls1088aqds_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - MC address changes for TFABOOT - define BOOTCOMMAND for TFABOOT - ifc chip select changes for TFABOOT Signed-off-by: Rajesh Bhagat <[email protected]> Signed-off-by: Pankit Garg <[email protected]> Reviewed-by: York Sun <[email protected]>
2019-01-17armv8: ls1088ardb: Add TFABOOT supportPankit Garg
TFABOOT support includes: - ls1088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - MC address changes for TFABOOT - define BOOTCOMMAND for TFABOOT - ifc chip select changes for TFABOOT Signed-off-by: Rajesh Bhagat <[email protected]> Signed-off-by: Pankit Garg <[email protected]> Reviewed-by: York Sun <[email protected]>
2019-01-17ls1043a: add support for nand-boot cmd for TFAPankit Garg
Signed-off-by: Pankit Garg <[email protected]> Reviewed-by: York Sun <[email protected]>
2019-01-16lmb: remove unused extern declarationSimon Goldschmidt
lmb.h includes an extern declaration of "struct lmb lmb;" which is not used anywhere, so remove it. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Simon Goldschmidt <[email protected]>
2019-01-16fs: prevent overwriting reserved memorySimon Goldschmidt
This fixes CVE-2018-18440 ("insufficient boundary checks in filesystem image load") by using lmb to check the load size of a file against reserved memory addresses. Signed-off-by: Simon Goldschmidt <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2019-01-16lib: lmb: extend lmb for checks at load timeSimon Goldschmidt
This adds two new functions, lmb_alloc_addr and lmb_get_unreserved_size. lmb_alloc_addr behaves like lmb_alloc, but it tries to allocate a pre-specified address range. Unlike lmb_reserve, this address range must be inside one of the memory ranges that has been set up with lmb_add. lmb_get_unreserved_size returns the number of bytes that can be used up to the next reserved region or the end of valid ram. This can be 0 if the address passed is reserved. Added test for these new functions. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Simon Goldschmidt <[email protected]>
2019-01-16mips: mscc: luton+ocelot: Remove board config options, do probingLars Povlsen
As we are moving to multi-dtb and board detection, remove static board config options, and introduce board probing instead. Luton: This add single-binary support for the two MSCC luton-based reference boards - pcb090 and pcb091. The SoC chip ID is used to determine the board type. Ocelot: This add single-binary support for the two MSCC ocelot-based reference boards - pcb120 and pcb123. The PHY ids on specific ports are used to determine the board type. Signed-off-by: Lars Povlsen <[email protected]>
2019-01-15Merge tag 'dm-pull-15jan19' of git://git.denx.de/u-boot-dmTom Rini
Fix recent changes to serial API for driver model Buildman clang support and a few fixes Small fixes to 'dm tree' and regmap test Improve sandbox build compatibility A few other minor fixes
2019-01-15Merge git://git.denx.de/u-boot-riscvTom Rini
1. Improve cache implementation. 2. Fix and improve standalone applications
2019-01-15common: command: Add support for $ auto-completionBoris Brezillon
Add the dollar_complete() function to auto-complete arguments starting with a '$' and use it in the cmd_auto_complete() path such that all args starting with a $ can be auto-completed based on the available env vars. Signed-off-by: Boris Brezillon <[email protected]> [trini: Fix some linking problems] Signed-off-by: Tom Rini <[email protected]>
2019-01-15misc: fs_loader: Switching private data allocation to DM auto allocationTien Fong Chee
Switching private data manual allocation to driver model auto allocation so users no longer need to deallocate themself because this would be deallocated by driver model when the device is no longer required. Signed-off-by: Tien Fong Chee <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2019-01-15command: commands: Add macros to declare commands with subcmdsBoris Brezillon
Most cmd/xxx.c source files expose several commands through a single entry point. Some of them are doing the sub-command parsing manually in their do_<cmd>() function, others are declaring a table of sub-commands and then use find_cmd_tbl() to delegate the request to the sub command handler. In either case, the amount of code to do that is not negligible and repetitive, not to mention that almost no commands are implementing the auto-completion hook, which means most u-boot commands lack auto-completion. Provide several macros to easily define commands exposing sub-commands. Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2019-01-15common: command: Rework the 'cmd is repeatable' logicBoris Brezillon
The repeatable property is currently attached to the main command and sub-commands have no way to change the repeatable value (the ->repeatable field in sub-command entries is ignored). Replace the ->repeatable field by an extended ->cmd() hook (called ->cmd_rep()) which takes a new int pointer to store the repeatable cap of the command being executed. With this trick, we can let sub-commands decide whether they are repeatable or not. We also patch mmc and dtimg who are testing the ->repeatable field directly (they now use cmd_is_repeatable() instead), and fix the help entry manually since it doesn't use the U_BOOT_CMD() macro. Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2019-01-15common: command: Expose a generic helper to auto-complete sub commandsBoris Brezillon
Some commands have a table of sub-commands. With minor adjustments, complete_cmdv() is able to provide auto-completion for sub-commands (it's just about passing the table of commands instead of taking the global one). We rename this function into complete_subcmd() and implement complete_cmdv() as a wrapper around complete_subcmdv(). Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2019-01-15omap3: igep00x0: Remove USB support due DM_USB deadlineEnric Balletbo i Serra
The USB support for this board was never really tested, in fact, the presence of these options are more a copy & paste error from the Beagleboard than a feature that really was used. As doesn't work, remove for now. If someone at some point want to add this support he'll need to migrate the board to use CONFIG_DM_USB instead. Signed-off-by: Enric Balletbo i Serra <[email protected]>
2019-01-15riscv: qemu: define standalone load addressLukas Auer
We need to define the standalone load address to use standalone application on qemu-riscv. Define it and set it equal to CONFIG_SYS_LOAD_ADDR. To not overwrite it, change the assigned of CONFIG_STANDALONE_LOAD_ADDR in arch/riscv/config.mk to a conditional one. Signed-off-by: Lukas Auer <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2019-01-14dm: serial: Tidy up header file commentsSimon Glass
The getconfig() comment is out of date. Fix this and add comments for recently added functions. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
2019-01-14dm: serial: Adjust serial_getinfo() to use proper APISimon Glass
All driver-model functions should have a device as the first parameter. Update this function accordingly. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
2019-01-14dm: serial: Adjust serial_setconfig() to use proper APISimon Glass
All driver-model functions should have a device as the first parameter. Update this function accordingly. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
2019-01-14dm: serial: Adjust serial_getconfig() to use proper APISimon Glass
All driver-model functions should have a device as the first parameter. Update this function accordingly. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
2019-01-14serial: Move new functions to serial.hSimon Glass
We should not be adding new functions to common.h. Move these recently added functions to serial.h. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
2019-01-14log: Check printf() argumentsSimon Glass
At present logging does not check printf() arguments. Now that all users have been corrected, enable this to prevent further problems. Signed-off-by: Simon Glass <[email protected]>
2019-01-14test: dm: regmap: Fix the long test delaySimon Glass
At present one of the regmap tests takes 5 seconds to run since it waits for a timeout. This should be handled using sandbox_timer_add_offset() which advances time for test purposes. This requires a little change to make the regmap_read_poll_timeout() testable. Update the macro and the test. Fixes: ebe3497c9c ("test: regmap: add regmap_read_poll_timeout test") Signed-off-by: Simon Glass <[email protected]>
2019-01-14include: configs: Add gunzip size for HiKey boardManivannan Sadhasivam
Default 8MB gunzip size is not enough to load the release kernel, hence fix 64MB size for uncompressing the kernel. Signed-off-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2019-01-14arm: MediaTek: add ethernet support for MT7629 boardsWeijie Gao
Enable ethernet related configs to mt7629_rfb_defconfig. Add default IP addresses. Enable noncached memory region required by ethernet driver. Signed-off-by: Mark Lee <[email protected]>
2019-01-14arm: MediaTek: add ethernet support for MT7623 boardsWeijie Gao
Enable ethernet related configs to mt7623n_bpir2_defconfig. Add default IP addresses. Enable noncached memory region required by ethernet driver. Signed-off-by: Mark Lee <[email protected]>
2019-01-14reset: MedaiTek: add reset controller driver for MediaTek SoCsWeijie Gao
This patch adds reset controller driver for MediaTek SoCs. Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Weijie Gao <[email protected]>
2019-01-14imx8mq_evk_defconfig: Move file system options to KconfigFabio Estevam
Chris Spencer reports that when enabling ext4 read support without also enabling write support the following error is seen: fs/fs.c:198:12: error: 'ext4_write_file' undeclared here (not in a function); did you mean 'ext4_read_file'? .write = ext4_write_file, ^~~~~~~~~~~~~~~ Fix this problem by moving these options to Kconfig. Reported-by: Chris Spencer <[email protected]> Acked-by: Peng Fan <[email protected]> Signed-off-by: Fabio Estevam <[email protected]>
2019-01-14poplar: save environment at a different offsetAlex Elder
Change CONFIG_ENV_OFFSET for Poplar to be 1MB further into the eMMC than before. This puts it immediately prior to the space we are reserving offset 0x200000-0x400000 for UEFI to save its persistent data. Define CONFIG_ENV_SIZE as a product of env_mmc_nblks and the sector size, like CONFIG_ENV_OFFSET is. Signed-off-by: Alex Elder <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2019-01-10Merge tag 'u-boot-imx-20190110' of git://git.denx.de/u-boot-imxTom Rini
Fixes for 2019.01
2019-01-09board: tbs2910: Add u-boot.imx size limit checkSoeren Moch
Check the size of the generated u-boot.imx file. Report an error if it would be too big and overwrite the u-boot environment. Signed-off-by: Soeren Moch <[email protected]>
2019-01-09arm: mx5: Enable WDT and bootcounter on M53MenloMarek Vasut
Enable watchdog and bootcounter support on the M53Menlo board. Signed-off-by: Marek Vasut <[email protected]> Cc: Stefano Babic <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-12 08:21:18 +0000