| Age | Commit message (Collapse) | Author |
|---|
|
Add CONFIG_SYS_FSL_QSPI_AHB in header file to enable AHB in driver.
In order to count the time, add CONFIG_CMD_TIME.
Using AHB read can improve the the read speed about 30%.
AHB read:
=> time sf read 0x8f800000 0 100000
SF: 1048576 bytes @ 0x0 Read: OK
time: 0.174 seconds
=> time sf read 0x8f800000 1000000 100000
SF: 1048576 bytes @ 0x1000000 Read: OK
time: 0.174 seconds
IP read:
=> time sf read 0x8f800000 0 100000
SF: 1048576 bytes @ 0x0 Read: OK
time: 0.227 seconds
=> time sf read 0x8f800000 1000000 100000
SF: 1048576 bytes @ 0x1000000 Read: OK
time: 0.227 seconds
Note:
Quad read is not supported in driver, now. In my side, using AHB and Quad read
can achieve about 16MB/s. Anyway, I have plan to reimplement the driver using
DTB and DM, then make the code cleaner and more feature can be added.
Signed-off-by: Peng Fan <[email protected]>
Reviewed-by: Jagannadha Sutradharudu Teki <[email protected]>
|
|
mx6sxsabresd revb board uses 32MB qspi flash, reva board uses 16MB qspi
flash. Currently, the default supported platform is revb board.
If want to configure for reva board, just define CONFIG_MX6SX_SABRESD_REVA
in mx6sxsabresd.h to support reva qspi flashes whose size is 16MB.
Signed-off-by: Peng Fan <[email protected]>
Reviewed-by: Jagannadha Sutradharudu Teki <[email protected]>
|
|
|
|
|
|
This fixes us never programming ALDO2, and programming the ALDO2 voltage
into ALDo1.
Reported-by: Siarhei Siamashka <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Get about 40x faster access on SHEEVAPLUG MMC
Fix some SD type compatibility
Changes in v3:
- fix the HW_STATE (from linux mvsdio)
- review delays and timeouts
Changes in v2:
- increase number of loops
- remove initial delay
Changes in v1:
- review all loops, delays and timeouts
Signed-off-by: Gérald Kerma <[email protected]>
Acked-by: Pantelis Antoniou <[email protected]>
|
|
Signed-off-by: David Buechi <[email protected]>
|
|
NFS is useful for loading zImage and dts through
NFS export. It saves us from running two services
for loading files over the network (tftp and nfs).
Signed-off-by: Felipe Balbi <[email protected]>
|
|
Add configs required for SATA support on CM-T54 board.
Signed-off-by: Dmitry Lifshitz <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Extract controller reset code from ahci_host_init() into separate
ahci_reset().
Signed-off-by: Dmitry Lifshitz <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Add defines to use CONFIG_SYS_GENERIC_BOARD and CONFIG_OF_LIBFDT.
Semi-separate to this: the size of the image for the da850evm has
increased to the point that the size in da850evm.h and the offset for
the environment in SPI flash no longer work. They are modified to
account for the larger image size.
Signed-off-by: Peter Howard <[email protected]>
Reviewed-by: Jagannadha Sutradharudu Teki <[email protected]>
Reviewed-by: Jagannadha Sutradharudu Teki <[email protected]>
|
|
Enable UUID and partition support for scripted handling platforms with
MMC and eMMC and varied partitioning schemes
And remove it from headers that end up redefining it.
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Signed-off-by: Anthoine Bourgeois <[email protected]>
|
|
Convert cm-t35 to generic board.
Cc: Igor Grinberg <[email protected]>
Cc: Tom Rini <[email protected]>
Signed-off-by: Nikita Kiryanov <[email protected]>
Acked-by: Igor Grinberg <[email protected]>
|
|
All the MPC824X boards are still non-generic boards:
A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Josef Wagner <[email protected]>
Cc: Torsten Demke <[email protected]>
Cc: Jim Thompson <[email protected]>
Cc: Greg Allen <[email protected]>
|
|
These boards are still non-generic boards.
drivers/rtc/ds12887.c should also be removed because it can not
be built without CONFIG_ATC.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Denk <[email protected]>
|
|
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Denk <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Oliver Brown <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Grandegger <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Heiko Schocher <[email protected]>
|
|
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Denk <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Rune Torgersen <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Frank Panno <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Brad Kemp <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Jerry Van Baren <[email protected]>
|
|
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Murray Jensen <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Conn Clark <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Denk <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Denk <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Denk <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Pantelis Antoniou <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Denk <[email protected]>
|
|
This board is still a non-generic board.
Unused code in arch/powerpc/cpu/mpc8xx/video.c should be also deleted
because CONFIG_VIDEO_ENCODER_AD7176, CONFIG_VIDEO_ENCODER_AD7177,
CONFIG_VIDEO_ENCODER_AD7179 are not defined any more.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Denk <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Denk <[email protected]>
|
|
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Klaus Heydeck <[email protected]>
|
|
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: The LEOX team <[email protected]>
|
|
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Heiko Schocher <[email protected]>
Cc: Stefan Roese <[email protected]>
|
|
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Wolfgang Denk <[email protected]>
|
|
|
|
|
|
Conflicts:
include/configs/arndale.h
Signed-off-by: Tom Rini <[email protected]>
|
|
Patch enables AX88179 driver for ARNDALE 5250
Signed-off-by: Rene Griessl <[email protected]>
|
|
This patch adds driver support for the ASIX AX88179 USB3.0 to GbE network
adapter.
Driver has been tested on the RECS5250 COM module (similar to ARDALE5250).
Testcase was DHCP and PXE boot.
Signed-off-by: Rene Griessl <[email protected]>
|
|
Add spi nor boot support for mx6slevk board.
Signed-off-by: Peng Fan <[email protected]>
Reviewed-by: Jagannadha Sutradharudu Teki <[email protected]>
|
|
Configure the pad setting and enable qspi clock to support qspi
flashes access.
Add QSPI related macro in configuration header file.
Note:
mx6sxsabresd Revb board, 32M flash is used, but in header file,
CONFIG_SPI_FLASH_BAR is not defined, and we still use SZ_16M.
The LUT initialization qspi_set_lut function uses 32BIT addr,
however CONFIG_SPI_FLASH_BAR and 24BIT addr should be used to
access bigger than 16MB size flash, and BRRD/BRWR should also
be supported. Future patches will fix this.
Signed-off-by: Peng Fan <[email protected]>
Reviewed-by: Jagannadha Sutradharudu Teki <[email protected]>
|
|
|
|
|
|
|
