summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2023-10-07spl: fit: support for booting a LZMA-compressed U-boot binaryManoj Sai
If LZMA Compression support is enabled, LZMA compressed U-Boot binary will be placed at a specified RAM location which is defined at CONFIG_SYS_LOAD_ADDR and will be assigned as the source address. image_decomp() function, will decompress the LZMA compressed U-Boot binary which is placed at source address(CONFIG_SYS_LOAD_ADDR) to the default CONFIG_SYS_TEXT_BASE location. spl_load_fit_image function will load the decompressed U-Boot binary, which is placed at the CONFIG_SYS_TEXT_BASE location. Signed-off-by: Manoj Sai <[email protected]> Signed-off-by: Suniel Mahesh <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Kever Yang <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-10-07spl: fit: support for booting a GZIP-compressed U-boot binaryManoj Sai
If GZIP Compression support is enabled, GZIP compressed U-Boot binary will be at a specified RAM location which is defined at CONFIG_SYS_LOAD_ADDR and will be assign it as the source address. gunzip function in spl_load_fit_image ,will decompress the GZIP compressed U-Boot binary which is placed at source address(CONFIG_SYS_LOAD_ADDR) to the default CONFIG_SYS_TEXT_BASE location. spl_load_fit_image function will load the decompressed U-Boot binary, which is placed at the CONFIG_SYS_TEXT_BASE location. Signed-off-by: Manoj Sai <[email protected]> Signed-off-by: Suniel Mahesh <[email protected]> Reviewed-by: Kever Yang <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-10-07power: regulator: Only run autoset once for each regulatorJonas Karlman
With the commit 4fcba5d556b4 ("regulator: implement basic reference counter"), keeping regulator enablement in balance become more important. Calling regulator_autoset multiple times on a fixed regulator increase the enable count for each call, resulting in an unbalanced enable count. Introduce a AUTOSET_DONE flag and use it to mark that autoset has run for the regulator. Return -EALREADY on any subsequent call to autoset. This fixes so that the enable count is only ever increased by one per regulator for autoset. Fixes: 4fcba5d556b4 ("regulator: implement basic reference counter") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-04Merge tag 'u-boot-stm32-20231004' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm STM32 MCU: _ alignment with kernel DT v6.5 for stm32f429 and stm32f746 _ rework way of displaying ST logo for stm32f746-disco and stm32f769-disco STM32 MPU: _ alignment with kernel DT v6.6-rc1 _ add RNG support for stm32mp13 _ add USB, USB boot and stm32prog command support for stm32mp13 _ add support of USART1 clock for stm32mp1 _ only print RAM and board code with SPL_DISPLAY_PRINT flag for stm32mp1 _ rename update_sf to dh_update_sd_to_sf and add dh_update_sd_to_emmc for stm32mp15xx DHCOR [ Fix merge conflict at board/st/common/stm32mp_dfu.c ] Signed-off-by: Tom Rini <[email protected]>
2023-10-04configs: stm32mp13: add support of usb bootPatrick Delaunay
Add support of USB key boot in distro boot command. Signed-off-by: Patrick Delaunay <[email protected]> Signed-off-by: Patrice Chotard <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]>
2023-10-04configs: stm32mp13: activate command stm32progPatrick Delaunay
Activate the command stm32prog with CONFIG_CMD_STM32MPROG. The CONFIG_SET_DFU_ALT_INFO is also activated to support the required weak functions for the DFU virtual backen defined in board/st/common/stm32mp_dfu.c. Signed-off-by: Patrick Delaunay <[email protected]> Signed-off-by: Patrice Chotard <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]>
2023-10-04ARM: dts: stm32mp: alignment with v6.6-rc1Patrice Chotard
Device tree alignment with Linux kernel v6.6.rc1. Signed-off-by: Patrice Chotard <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]>
2023-10-04ARM: stm32: Add dh_update_sd_to_emmc to STM32MP15xx DHCORMarek Vasut
Add script which installs U-Boot binaries from SD card to eMMC and makes the eMMC bootable. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2023-10-04ARM: stm32: Rename update_sf to dh_update_sd_to_sf on STM32MP15xx DHCORMarek Vasut
Align the script name with DH i.MX8MP DHCOM script name. Add backward compatibility script to avoid breaking user scripts. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2023-10-04Remove the hardcoded ST logo no longer in useDario Binacchi
The patch removes the hardcoded ST logo from the code, as it is no longer used. Signed-off-by: Dario Binacchi <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2023-10-04board: stm32f746-disco: refactor the display of the ST logoDario Binacchi
The patch removes the legacy mode of displaying the ST logo and adopts the approach introduced by the commit 284b08fb51b6 ("board: stm32mp1: add splash screen with stmicroelectronics logo"). It was necessary to use a specific logo for the stm32f746-disco board. Furthermore, the previous version didn't properly center the logo, hiding its upper part. Signed-off-by: Dario Binacchi <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2023-10-04dt-bindings: mfd: stm32f7: Add binding definition for CAN3Dario Binacchi
commit 8f3ef556f8e1a670895f59ef3f01e4e26edd63e3 Linux upstream. Add binding definition for CAN3 peripheral. Signed-off-by: Dario Binacchi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2023-10-02Merge branch 'next_pinctrl_sync' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-sh - pinctrl re-sync for Renesas chips
2023-10-02Merge branch 'next'Tom Rini
Signed-off-by: Tom Rini <[email protected]>
2023-10-01clk: renesas: Synchronize R8A779F0 S4 clock tables with Linux 6.5.3Marek Vasut
Synchronize R-Car R8A779F0 S4 clock tables with Linux 6.5.3, commit 238589d0f7b421aae18c5704dc931595019fa6c7 . Signed-off-by: Marek Vasut <[email protected]>
2023-10-01clk: renesas: Synchronize R8A779F0 S4 DT headers with Linux 6.5.3Marek Vasut
Synchronize R-Car R8A779F0 S4 DT headers with Linux 6.5.3, commit 238589d0f7b421aae18c5704dc931595019fa6c7 . Signed-off-by: Marek Vasut <[email protected]>
2023-10-01clk: renesas: Synchronize R8A77951 H3 DT headers with Linux 6.5.3Marek Vasut
Synchronize R-Car R8A77951 H3 DT headers with Linux 6.5.3, commit 238589d0f7b421aae18c5704dc931595019fa6c7 . Signed-off-by: Marek Vasut <[email protected]>
2023-10-01linux/compat.h: Define empty __initconst and __initdataMarek Vasut
Introduce two new empty macros used in various static tables in Linux. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-09-30Convert CFG_SYS_UBOOT_START to KconfigJesse Taube
Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*") renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately, this meant that the value was no longer available to the Makefile. This caused imxrt to fail to boot. All the other boards that used this variable were unaffected because they were using the default value which is CONFIG_TEXT_BASE. This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default value to CONFIG_TEXT_BASE. Suggested-by: Marek Vasut <[email protected]> Suggested-by: Tom Rini <[email protected]> Signed-off-by: Jesse Taube <[email protected]> Reviewed-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-09-28env: ti: ti_common.env: Fix get_overlaystring for FIT ImageManorit Chawdhry
After the refactor with conf- nodes in fitImage, overlaystring wasn't didn't handle the new conf- nodes in FIT Booting. Fix get_overlaystring to handle conf- nodes. Fixes: 837833a724b7 ("environment: ti: Add get_fit_config command to get FIT config string") Reported-by: Aniket Limaye <[email protected]> Signed-off-by: Manorit Chawdhry <[email protected]> Reviewed-by: Andrew Davis <[email protected]>
2023-09-24Merge tag 'dm-next-23sep23' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dm into next buildman file-keeping and build-progress improvements dm tree enhancement adjust meaning of bootph-pre-ram/sram
2023-09-24common: Drop linux/printk.h from common headerSimon Glass
This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <[email protected]>
2023-09-23cmd: dm: allow for selecting uclass and deviceAKASHI Takahiro
The output from "dm tree" or "dm uclass" is a bit annoying if the number of devices available on the system is huge. (This is especially true on sandbox when I debug some DM code.) With this patch, we can specify the uclass name or the device name that we are interested in in order to limit the output. For instance, => dm uclass usb uclass 121: usb 0 usb@1 @ 0bcff8b0, seq 1 uclass 124: usb => dm tree usb:usb@1 Class Index Probed Driver Name ----------------------------------------------------------- usb 0 [ ] usb_sandbox usb@1 usb_hub 0 [ ] usb_hub `-- hub usb_emul 0 [ ] usb_sandbox_hub `-- hub-emul usb_emul 1 [ ] usb_sandbox_flash |-- flash-stick@0 usb_emul 2 [ ] usb_sandbox_flash |-- flash-stick@1 usb_emul 3 [ ] usb_sandbox_flash |-- flash-stick@2 usb_emul 4 [ ] usb_sandbox_keyb `-- keyb@3 If you want forward-matching against a uclass or udevice name, you can specify "-e" option. => dm uclass -e usb uclass 15: usb_emul 0 hub-emul @ 0bcffb00, seq 0 1 flash-stick@0 @ 0bcffc30, seq 1 2 flash-stick@1 @ 0bcffdc0, seq 2 3 flash-stick@2 @ 0bcfff50, seq 3 4 keyb@3 @ 0bd000e0, seq 4 uclass 64: usb_mass_storage uclass 121: usb 0 usb@1 @ 0bcff8b0, seq 1 uclass 122: usb_dev_generic uclass 123: usb_hub 0 hub @ 0bcff9b0, seq 0 uclass 124: usb => dm tree -e usb Class Index Probed Driver Name ----------------------------------------------------------- usb 0 [ ] usb_sandbox usb@1 usb_hub 0 [ ] usb_hub `-- hub usb_emul 0 [ ] usb_sandbox_hub `-- hub-emul usb_emul 1 [ ] usb_sandbox_flash |-- flash-stick@0 usb_emul 2 [ ] usb_sandbox_flash |-- flash-stick@1 usb_emul 3 [ ] usb_sandbox_flash |-- flash-stick@2 usb_emul 4 [ ] usb_sandbox_keyb `-- keyb@3 Signed-off-by: AKASHI Takahiro <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-09-23dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocationJonas Karlman
Nodes with bootph-pre-sram/ram props are bound in multiple phases: 1. At TPL (bootph-pre-sram) or SPL (bootph-pre-ram) phase 2. At U-Boot proper pre-relocation phase 3. At U-Boot proper normal phase However the binding and U-Boot Driver Model documentation indicate that only nodes marked with bootph-all or bootph-some-ram should be bound in the U-Boot proper pre-relocation phase. Change ofnode_pre_reloc to report a node with bootph-pre-ram/sram prop with a pre-reloc status only after U-Boot proper pre-relocation phase. Also update the ofnode_pre_reloc documentation to closer reflect the binding and driver model documentation. This changes behavior of what nodes are bound in the U-Boot proper pre-relocation phase. Change to bootph-all or add bootph-some-ram prop to restore prior behavior. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-09-22Record the position of the SMBIOS tablesSimon Glass
Remember where these end up so that we can pass this information on to the EFI layer. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2023-09-22bootstd: Keep track of use of usb stopSimon Glass
When 'usb stop' is run, doing 'bootflow scan' does not run the USB hunter again so does not see any devices. Fix this by telling bootstd about the state of USB. Signed-off-by: Simon Glass <[email protected]>
2023-09-22dm: core: Allow marking driver model as deadSimon Glass
On x86 devices we use CAR (Cache-As-RAM) to hold the malloc() region in SPL, since SDRAM is not set up yet. This means that driver model stores its tables in this region. When preparing to jump from SPL to U-Boot proper, we must disable CAR, so that the CPU can uses the caches normally. This means that driver model tables become inaccessible. From there until we jump to U-Boot proper, we must avoid using driver model. This is only a problem on boards which operate this way, for example chromebook_link64 Add a flag to indicate that driver model is dead and should not be used. It can be used in SPL to avoid hanging the machine. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2023-09-22x86: Prevent from missing the FADT chainingAndy Shevchenko
Recent approach with FADT writer shows that there is a room for subtle errors. Prevent this from happening again by introducing acpi_add_fadt() helper. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2023-09-22x86: cpu: i386: cpu: only set pci_ram_top if CONFIG_IS_ENABLED(PCI)Troy Kisky
This avoids an error when ifdef CONFIG_PCI is changed to if CONFIG_IS_ENABLED(PCI) Signed-off-by: Troy Kisky <[email protected]> [Rebased on top of u-boot/master] Signed-off-by: Bin Meng <[email protected]>
2023-09-21Merge tag 'xilinx-for-v2024.01-rc1-v2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2024.01-rc1 clk: - Dont return error when assigned-clocks is empty or missing dm: - Support reading a single indexed u64 value - Add support for reading bootscript address/flash address from DT cmd: - Fix flash_is_unlocked API fpga: - Define fpga_load() for debug build global: - U-Boot project name cleanup (next2) net: - zynq_gem: Use generic_phy_valid() helper - axienet: Convert to ofnode functions - gmii2rgmii: Read bridge address from DT pytest: - skip tpm2_startup when env__tpm_device_test_skip=True spi-nor: - Add mx25u25635f support - zynqmp_qspi: Tune cache behavior trace: - Fix flyrecord alignment issue xilinx: - Move scriptaddr to DT as bootscr-address - Pick script_offset_f/script_size_f from DT as bootscr-flash-offset/size - Do not generate distro boot variables if disabled versal: - Extend memory ranges to cover HBM - Enable TPM, sha1sum and KASLRSEED - Fix distroboot prioritization in connection to available devices - Clean mini targets bootcommand - Fix clock driver versal-net: - Enable TPM, sha1sum and KASLRSEED - Fix distroboot prioritization in connection to available devices zynqmp; - Allow AES to run from SPL - Enable CMD_KASLRSEED - Add proper dependencies for USB and remove ZYNQMP_USB - Fix user si570 default frequency for zcu* boards - Cover SOM rev2 revision - Various DT changes - Add firmware and pinctrl support for tristate configuration (high impedance/output enable) - Add output-enable pins to SOMs - Fix distroboot prioritization in connection to available devices - Read bootscript address/flash address from DT - Fix pcap_prog address
2023-09-21zynqmp: config: Add proper dependencies for USBVenkatesh Yadav Abbarapu
When CONFIG_CMD_USB and CONFIG_USB are disabled, still some compilation errors are seen as below. In file included from include/configs/xilinx_zynqmp.h:173, from include/config.h:3, from include/common.h:16, from env/common.c:10: include/config_distro_bootcmd.h:302:9: error: expected '}' before 'BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB' 302 | BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/config_distro_bootcmd.h:302:9: note: in definition of macro 'BOOTENV_DEV_NAME_USB' 302 | BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/configs/xilinx_zynqmp.h:77:41: note: in expansion of macro 'BOOTENV_DEV_NAME' 77 | # define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1) | ^~~~ include/configs/xilinx_zynqmp.h:168:9: note: in expansion of macro 'BOOT_TARGET_DEVICES_USB' 168 | BOOT_TARGET_DEVICES_USB(func) \ | ^~~~~~~~~~~~~~~~~~~~~~~ include/config_distro_bootcmd.h:454:25: note: in expansion of macro 'BOOT_TARGET_DEVICES' 454 | "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0" | ^~~~~~~~~~~~~~~~~~~ include/config_distro_bootcmd.h:474:9: note: in expansion of macro 'BOOTENV_BOOT_TARGETS' 474 | BOOTENV_BOOT_TARGETS \ | ^~~~~~~~~~~~~~~~~~~~ include/configs/xilinx_zynqmp.h:179:9: note: in expansion of macro 'BOOTENV' 179 | BOOTENV | ^~~~~~~ include/env_default.h:120:9: note: in expansion of macro 'CFG_EXTRA_ENV_SETTINGS' 120 | CFG_EXTRA_ENV_SETTINGS | ^~~~~~~~~~~~~~~~~~~~~~ In file included from env/common.c:32: include/env_default.h:27:36: note: to match this '{' 27 | const char default_environment[] = { | ^ scripts/Makefile.build:256: recipe for target 'env/common.o' failed make[1]: *** [env/common.o] Error 1 Makefile:1853: recipe for target 'env' failed make: *** [env] Error 2 make: *** Waiting for unfinished jobs.... Add CONFIG_USB_STORAGE as dependency for USB related macro's such as BOOT_TARGET_DEVICES_USB() and DFU_DEFAULT_POLL_TIMEOUT and CONFIG_THOR_RESET_OFF. Remove CONFIG_ZYNQMP_USB from Kconfig and also from defconfig since it is not used anywhere else. Signed-off-by: Ashok Reddy Soma <[email protected]> Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2023-09-21arm64: xilinx: Guard distro boot variable generationMichal Simek
When distro boot is disabled there is no reason to generate variables for it. Also do not update boot_targets variable because it would be unused. It is useful for example when standard boot is enabled and distro boot is disabled. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/570c51435da59831ec245cddceda078afa58a550.1693913398.git.michal.simek@amd.com
2023-09-21dm: core: ofnode: Add ofnode_read_bootscript_flash()Michal Simek
ofnode_read_bootscript_flash() reads bootscript address from /options/u-boot DT node. bootscr-flash-offset and bootscr-flash-size properties are read and values are filled. When bootscr-flash-size is not defined, bootscr-flash-offset property is unusable that's why cleaned. Both of these properties should be defined to function properly. Also add test to cover this new function. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/08a3e6c09cce13287c69ad370e409e7f1766b406.1693465465.git.michal.simek@amd.com
2023-09-21dm: core: ofnode: Add ofnode_read_bootscript_address()Michal Simek
ofnode_read_bootscript_address() reads bootscript address from /options/u-boot DT node. bootscr-address or bootscr-ram-offset properties are read and values are filled. bootscr-address has higher priority than bootscr-ram-offset and the only one should be described in DT. Also add test to cover this new function. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/23be3838502efef61803c90ef6e8b32bbd6ede41.1693465140.git.michal.simek@amd.com
2023-09-21fpga: define dummy fpga_load function for debug buildChanho Park
This fixes below build error when CC_OPTIMIZE_FOR_DEBUG is enabled and CONFIG_FPGA or CONFIG_SPL_FPGA are not enabled. When CC_OPTIMIZE_FOR_DEBUG is enabled, unused code will not be optimized out. Hence, fpga_load function must have a dummy implementation to avoid the build error. ../common/spl/spl_fit.c:591: undefined reference to `fpga_load' collect2: error: ld returned 1 exit status Signed-off-by: Chanho Park <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2023-09-21firmware: zynqmp: Add support to check featureAshok Reddy Soma
Add firmware API to check if given feature is supported. Signed-off-by: Ashok Reddy Soma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2023-09-21dm: core: support reading a single indexed u64 valueMichal Simek
Add helper function to allow reading a single indexed u64 value from a device-tree property containing multiple u64 values, that is an array of u64's. Co-developed-by: Ashok Reddy Soma <[email protected]> Signed-off-by: Ashok Reddy Soma <[email protected]> Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/08043c8d204d0068f04c27de86afe78c75c50b69.1692956263.git.michal.simek@amd.com
2023-09-21xilinx: Remove scriptaddr from config files and move it to DTMichal Simek
Define bootscript address in RAM via DT property and remove it from config file. Adding default value to common DTSI. Platform DT description can remove this property or rewrite it. In Zynq case scriptaddr property was defined twice for no reason. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/d36ffeb00ed8f0ca4bb67d4983d1852d01ade637.1691067102.git.michal.simek@amd.com
2023-09-20tools: mkimage: Add StarFive SPL image supportHeinrich Schuchardt
The StarFive JH7110 base boards require a header to be prefixed to the SPL binary image. This has previously done with a vendor tool 'spl_tool' published under a GPL-2-or-later license. Integrate this capability into mkimage. Signed-off-by: Heinrich Schuchardt <[email protected]> Tested-by: Chanho Park <[email protected]> Tested-by: Milan P. Stanić <[email protected]>
2023-09-20starfive: visionfive2: add mmc0 and nvme boot targetsMilan P. Stanić
boot from SDIO3.0 (mmc sdcard) first if it is plugged. If mmc is not plugged try to boot from emmc if it is plugged. If emmc is not plugged then try to boot from nvme. Signed-off-by: Milan P. Stanić <[email protected]> Reviewed-by: Leo Yu-Chi Liang <[email protected]>
2023-09-20configs: NVMe/USB target boot devices on VisionFive 2Heinrich Schuchardt
Make NVMe and USB target boot devices on the StarFive VisionFive 2 board. The boot devices are sorted by decreasing device speed. CONFIG_PCI_INIT_R=y is set via [1]. 'start usb' is added to CONFIG_PREBOOT by the same patch. [1] [PATCH v1 1/2] configs: starfive: Enable PCIE auto enum and NVME/USB stuff for Starfive Visionfive 2 https://lore.kernel.org/u-boot/TY3P286MB2611C9AD6E5BB3756A959E89981FA@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM/ Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Leo Yu-Chi Liang <[email protected]>
2023-09-19dt-bindings: ti-serdes: Deprecate header with constants with v6.6-rc1Nishanth Menon
The constants to define the idle state of SERDES MUX were defined in bindings header. They are used only in DTS and driver uses the dt property to set the idle state making it unsuitable for bindings. The constants are moved to header next to DTS ("arch/arm/boot/dts/") and all the references to bindings header are removed. So add a warning to mark this bindings header as deprecated. We could probably drop this header, but let us wait for kernel to cleanup. Signed-off-by: Nishanth Menon <[email protected]>
2023-09-16expo: Fix documentation referenceMassimo Pegorer
Fix typo: doc/develop/expo.rst instead of doc/developer/expo.rst Signed-off-by: Massimo Pegorer <[email protected]> Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Heinrich Schuchardt <[email protected]>
2023-09-15board: usb: Replace legacy usb_gadget_handle_interrupts()Marek Vasut
The usb_gadget_handle_interrupts() is no longer used anywhere, replace the remaining uses with dm_usb_gadget_handle_interrupts() which takes udevice as a parameter. Some of the UDC drivers currently ignore the index parameter altogether, those also ignore the udevice and have to be reworked. Other like the dwc3_uboot_handle_interrupt() had to be switched from index to udevice look up to avoid breakage. Reviewed-by: Mattijs Korpershoek <[email protected]> Tested-by: Mattijs Korpershoek <[email protected]> # on khadas vim3 Signed-off-by: Marek Vasut <[email protected]>
2023-09-15dm: usb: udc: Drop legacy udevice handler functionsMarek Vasut
Remove legacy functions limited by the dev_array array, those are no longer used anywhere, all the code uses plain udevice based access now. The usb_gadget_handle_interrupts() is doing udevice look up until all call sites use dm_usb_gadget_handle_interrupts(). Reviewed-by: Mattijs Korpershoek <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2023-09-15thordown: Use plain udevice for UDC controller interactionMarek Vasut
Convert to plain udevice interaction with UDC controller device, avoid the use of UDC uclass dev_array . Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]>
2023-09-15sdp: Use plain udevice for UDC controller interactionMarek Vasut
Convert to plain udevice interaction with UDC controller device, avoid the use of UDC uclass dev_array . Reviewed-by: Mattijs Korpershoek <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2023-09-15cmd: ums: Use plain udevice for UDC controller interactionMarek Vasut
Convert to plain udevice interaction with UDC controller device, avoid the use of UDC uclass dev_array . Reviewed-by: Mattijs Korpershoek <[email protected]> Tested-by: Mattijs Korpershoek <[email protected]> # on khadas vim3 Signed-off-by: Marek Vasut <[email protected]>
2023-09-15dm: usb: udc: Factor out plain udevice handler functionsMarek Vasut
Pull the functionality of UDC uclass that operates on plain udevice and does not use this dev_array array into separate functions and expose those functions, so that as much code as possible can be switched over to these functions and the dev_array can be dropped. Reviewed-by: Mattijs Korpershoek <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2023-09-14post: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-12 14:18:14 +0000