summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2017-12-07log: Add an implementation of loggingSimon Glass
Add the logging header file and implementation with some configuration options to control it. Signed-off-by: Simon Glass <[email protected]>
2017-12-07Drop the log bufferSimon Glass
This does not appear to be used by any boards. Before introducing a new log system, remove this old one. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2017-12-07Move debug and logging support to a separate headerSimon Glass
Before adding new features, move these definitions to a separate header to avoid further cluttering common.h. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2017-12-07Revert "sandbox: remove os_putc() and os_puts()"Simon Glass
While sandbox works OK without the special-case code, it does result in console output being stored in the pre-console buffer while sandbox starts up. If there is a crash or a problem then there is no indication of what is going on. For ease of debugging it seems better to revert this change. This reverts commit 47b98ad0f6779485d0f0c14f337c3eece273eb54. Signed-off-by: Simon Glass <[email protected]>
2017-12-05Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2017-12-05 Highlights for this release: - Dynamic EFI object creation (lists instead of static arrays) - EFI selftest improvements - Minor fixes
2017-12-04Merge git://git.denx.de/u-boot-uniphierTom Rini
2017-12-04omap3: evm: Explicitly use DISTRO_DEFAULTS features at startupDerald D. Woods
[primary] Check MMC 0:1 for /extlinux/extlinux.conf and boot [fallback 1] Check MMC 0:1 zImage and run mmcbootz [fallback 2] Check MMC 0:1 uImage and run mmcboot [fallback 3] Check NAND partitions and run nandboot If 'extlinux.conf' is not found on MMC 0, the previous boot behavior is followed. Signed-off-by: Derald D. Woods <[email protected]>
2017-12-04ARM: arch-meson: build memory banks using reported memory from registersNeil Armstrong
As discussed at [1], the Amlogic Meson GX SoCs can embed a BL31 firmware and a secondary BL32 firmware. Since mid-2017, the reserved memory address of the BL31 firmware was moved and grown for security reasons. But mainline U-Boot and Linux has the old address and size fixed. These SoCs have a register interface to get the two firmware reserved memory start and sizes. This patch adds a dynamic reservation of the memory zones in the device tree bootmem reserved memory zone used by the kernel in early boot. To be complete, the memory zones are also added to the EFI reserved zones. Depends on patchset "Add support for Amlogic GXL Based SBCs" at [2]. [1] http://lists.infradead.org/pipermail/linux-amlogic/2017-October/004860.html [2] http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005410.html Changes since v1: - switched the #if to if(IS_ENABLED()) to compile all code paths - renamed function to meson_board_add_reserved_memory() - added a mem.h header with comment - updated all boards ft_board_setup() Changes since RFC v2: - reduced preprocessor load - kept Odroid-C2 static memory mapping as exception Changes since RFC v1: - switch to fdt rsv mem table and efi reserve memory - replaced in_le32 by readl() Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> [trini: Fix warning on khadas-vim over missing <asm/arch/mem.h> Signed-off-by: Tom Rini <[email protected]>
2017-12-04arm: Add Khadas VIM support based on Meson GXL familyNeil Armstrong
This adds platform code for the Khadas VIM board based on a Meson GXL (S905X) SoC with the Meson GXL configuration. This initial submission supports UART, MMC/SDCard and Ethernet with the Internal RMII PHY. The meson-gxl-s905x-khadas-vim.dts is synchronised from the linux 4.13 stable tree as of 4.13.8. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Neil Armstrong <[email protected]>
2017-12-04arm: Add LibreTech CC support based on Meson GXL familyNeil Armstrong
This adds platform code for the Libre Computer CC "Le Potato" board based on a Meson GXL (S905X) SoC with the Meson GXL configuration. This initial submission supports UART, MMC/SDCard and Ethernet with the Internal RMII PHY. The meson-gxl-s905x-libretech-cc.dts is synchronised from the linux 4.13 stable tree as of 4.13.8. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Neil Armstrong <[email protected]>
2017-12-04add support for Raspberry Pi Zero WDmitry Korunov
Signed-off-by: Dmitry Korunov <[email protected]>
2017-12-04test: compression: Convert to unit test frameworkSimon Glass
Adjust this test to use the unit test framework. Drop the two existing commands for running the tests and replace them with a single 'ut compression' command, with sub-commands. Signed-off-by: Simon Glass <[email protected]> [trini: Continue to have ret = run_test_internal(...) in run_test so ret is always initialized] Signed-off-by: Tom Rini <[email protected]>
2017-12-04mtd: nand: include <asm/cache.h> from include/linux/mtd/rawnand.hMasahiro Yamada
This is needed for ARCH_DMA_MINALIGN. Signed-off-by: Masahiro Yamada <[email protected]>
2017-12-04mtd: nand: Rename nand.h into rawnand.hMasahiro Yamada
This header was renamed to rawnand.h in Linux. The following is the corresponding commit in Linux. commit d4092d76a4a4e57b65910899948a83cc8646c5a5 Author: Boris Brezillon <[email protected]> Date: Fri Aug 4 17:29:10 2017 +0200 mtd: nand: Rename nand.h into rawnand.h We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Masahiro Yamada <[email protected]>
2017-12-02test: Add a command function for test executionSimon Glass
The logic to either iterate through a list of tests or pick a named test is common to at lest two test suits. Move this logic into a new function and call it from the environment tests. Signed-off-by: Simon Glass <[email protected]>
2017-12-01efi_loader: helper function to add EFI object to listHeinrich Schuchardt
To avoid duplicate coding provide a helper function that initializes an EFI object and adds it to the EFI object list. efi_exit() is the only place where we dereference a handle to obtain a protocol interface. Add a comment to the function. Suggested-by: Alexander Graf <[email protected]> Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: manage protocols in a linked listHeinrich Schuchardt
Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: efi_console: use helper functionsHeinrich Schuchardt
Use helper functions efi_created_handle and efi_add_protocol for creating the console handles and instaling the respective protocols. This change is needed if we want to move from an array of protocols to a linked list of protocols. Eliminate EFI_PROTOCOL_OBJECT which is not used anymore. Currently we have not defined protocol interfaces to be const. So efi_con_out and efi_console_control cannot be defined as const. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: helper functions for protocol managementHeinrich Schuchardt
This patch provides helper functions to manage protocols. efi_search_protocol - find a protocol on a handle efi_add_protocol - install a protocol on a handle efi_remove_protocol - remove a protocol from a handle efi_remove_all_protocols - remove all protocols from a handle Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: efi_gop: use correct types for parametersHeinrich Schuchardt
Use efi_uintn_t instead of unsigned long. EFI_GRAPHICS_OUTPUT_BLT_OPERATION is an enum. If we don't define an enum we have to pass it as u32. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: argument of efi_search_obj should be constHeinrich Schuchardt
The argument of efi_search_obj is not changed so it should be marked as const. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: make efi_create_handle non-staticHeinrich Schuchardt
Export function efi_create_handle. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: efi_dp_match should have const argumentsHeinrich Schuchardt
efi_dp_match does not change its arguments. So they should be marked as const. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: rework efi_search_objHeinrich Schuchardt
EFI_HANDLEs are used both in boottime and in runtime services. efi_search_obj is a function that can be used to validate handles. So let's make it accessible via efi_loader.h. We can simplify the coding using list_for_each_entry. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: consistently use efi_uintn_t in boot servicesHeinrich Schuchardt
Consistenly use efi_uintn_t wherever the UEFI spec uses UINTN in boot services interfaces. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: replace UINTN by efi_uintn_tHeinrich Schuchardt
UINTN is used in the UEFI specification for unsigned integers matching the bitness of the CPU. Types in U-Boot should be lower case. The patch replaces it by efi_uintn_t. Suggested-by: Simon Glass <[email protected]> Suggested-by: Rob Clark <[email protected]> Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: remove unused typedef for INTNHeinrich Schuchardt
INTN is not used in the coding. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_selftest: test protocol managementHeinrich Schuchardt
This unit test checks the following protocol services: InstallProtocolInterface, UninstallProtocolInterface, InstallMultipleProtocolsInterfaces, UninstallMultipleProtocolsInterfaces, HandleProtocol, ProtocolsPerHandle, LocateHandle, LocateHandleBuffer. As UninstallProtocolInterface and UninstallMultipleProtocolsInterfaces are not completely implemented a TODO message will shown for their failure. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: capitalize EFI_LOCATE_SEARCH_TYPE valuesHeinrich Schuchardt
Constants should be capitalized. So rename the values of enum efi_locate_search_type. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_selftest: allow to select a single test for executionHeinrich Schuchardt
Environment variable efi_selftest is passed as load options to the selftest application. It is used to select a single test to be executed. The load options are an UTF8 string. Yet I decided to keep the name propertiy of the tests as char[] to reduce code size. Special value 'list' displays a list of all available tests. Tests get an on_request property. If this property is set the tests are only executed if explicitly requested. The invocation of efi_selftest is changed to reflect that bootefi selftest with efi_selftest = 'list' will call the Exit bootservice. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: guard against double inclusion of efi_loader.hHeinrich Schuchardt
Use a define to detect double inclusion of efi_loader.h. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: new function utf8_to_utf16Heinrich Schuchardt
Provide a conversion function from utf8 to utf16. Add missing #include <linux/types.h> in include/charset.h. Remove superfluous #include <common.h> in lib/charset.c. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-12-01efi_loader: implement SetWatchdogTimerHeinrich Schuchardt
The watchdog is initialized with a 5 minute timeout period. It can be reset by SetWatchdogTimer. It is stopped by ExitBoottimeServices. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2017-11-30rockchip: rk3128: add evb-rk3128 supportKever Yang
evb-rk3128 is an evb from Rockchip based on rk3128 SoC: - 2 USB2.0 Host port; - 1 HDMI port; - 2 10/100M eth port; - 2GB ddr; - 16GB eMMC; - UART to USB debug port; Signed-off-by: Kever Yang <[email protected]> Acked-by: Philipp Tomsich <[email protected]> Reviewed-by: Philipp Tomsich <[email protected]>
2017-11-30rockchip: rk3128: add soc basic supportKever Yang
RK3128 is a SoC from Rockchip with quad-core Cortex-A7 CPU and mali400 GPU. Support Nand flash, eMMC, SD card, USB 2.0 host and device, HDMI/LVDS/MIPI display. Signed-off-by: Kever Yang <[email protected]> Acked-by: Philipp Tomsich <[email protected]> Reviewed-by: Philipp Tomsich <[email protected]>
2017-11-30rockchip: rk3128: add device tree fileKever Yang
Add dts binding header for rk3128, files origin from kernel. Series-Changes: 2 - fix i2c address - add saradc and usb phy node - emmc using fifo mode for there is no dma support in rk3128 emmc - add some clock id in cru.h Signed-off-by: Kever Yang <[email protected]> Acked-by: Philipp Tomsich <[email protected]> Reviewed-by: Philipp Tomsich <[email protected]>
2017-11-30Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-shTom Rini
2017-11-30Merge git://git.denx.de/u-boot-marvellTom Rini
2017-11-30Merge git://git.denx.de/u-boot-x86Tom Rini
2017-11-30ARM: rmobile: Rework the ULCB CPLD driverMarek Vasut
Rework the ULCB CPLD driver and make it into a sysreset driver, since that is what the ULCB CPLD driver is mostly for. Signed-off-by: Marek Vasut <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]>
2017-11-30arm64: mvebu: armada-7k/8k: drop useless #ifdefBaruch Siach
CONFIG_ENV_IS_IN_NAND has been removed in commit 2be296538e2e (Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig). CONFIG_ENV_IS_IN_SPI_FLASH has been removed in commit 91c868fe7cd (Convert CONFIG_ENV_IS_IN_SPI_FLASH to Kconfig). The environment #ifdef is now empty. Remove it. Signed-off-by: Baruch Siach <[email protected]> Signed-off-by: Stefan Roese <[email protected]>
2017-11-30distro bootcmd: define bootloader name for x86Heinrich Schuchardt
Currently X86 does not properly support distro defaults. This patch is only a partial fix. It provides the name of the bootloader EFI application for the X86 architecture. The architecture dependent file names are defined in the UEFI specification. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2017-11-29board: laird: add WB50N CPU moduleBen Whitten
This board is based on the Atmel sama5d3 eval boards. Supporting the following features: - Boot from NAND Flash - Ethernet - FIT - SPL Signed-off-by: Ben Whitten <[email protected]> Signed-off-by: Dan Kephart <[email protected]>
2017-11-29board: laird: add WB45N CPU moduleBen Whitten
This board is based on the Atmel 9x5 eval board. Supporting the following features: - Boot from NAND Flash - Ethernet - FIT - SPL Signed-off-by: Ben Whitten <[email protected]> Signed-off-by: Dan Kephart <[email protected]>
2017-11-29spl: make CONFIG_OF_EMBED pass dts through fdtgrepGoldschmidt Simon
Building spl with CONFIG_OF_EMBED enabled results in an error message on my board: "SPL image too big". This is because the fdtgrep build step is only executed for CONFIG_OF_SEPARATE. Fix this by moving the fdtgrep build step ('cmd_fdtgreo') from scripts/Makefile.spl to dts/Makefile so that the reduced dtb is available for all kinds of spl builds. The resulting variable name for the embedded device tree blob changes, too, which is why common.h and fdtdec.c have tiny changes. Signed-off-by: Simon Goldschmidt <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2017-11-29board: atmel: add sama5d2_ptc_ek boardLudovic Desroches
Add the SAMA5D2 PTC EK board and remove the SAMA5D2 PTC ENGI board which was a prototype. Signed-off-by: Ludovic Desroches <[email protected]> Signed-off-by: Wenyou Yang <[email protected]>
2017-11-29stm32: migrate clock structs in include/stm32_rcc.hPatrice Chotard
In order to factorize code between STM32F4 and STM32F7 migrate all structs related to RCC clocks in include/stm32_rcc.h Signed-off-by: Patrice Chotard <[email protected]> Reviewed-by: Vikas Manocha <[email protected]>
2017-11-29clk: clk_stm32fx: add clock configuration for mmc usagePatrice Chotard
MMC block needs 48Mhz source clock, for that we choose to select the SAI PLL. Update also stm32_clock_get_rate() to retrieve the MMC clock source needed in MMC driver. STM32F4 uses a different RCC variant than STM32F7. For STM32F4 sdmmc clocks bit are located into dckcfgr register whereas there are located into dckcfgr2 registers on STM32F7. In both registers, bits CK48MSEL and SDMMC1SEL are located at the same position. Signed-off-by: Christophe Priouzeau <[email protected]> Signed-off-by: Patrice Chotard <[email protected]> Reviewed-by: Vikas Manocha <[email protected]>
2017-11-29dm: misc: bind STM32F4/F7 clock from rcc MFD driverPatrice Chotard
Like STM32H7, now STM32F4/F7 clock drivers are binded by MFD stm32_rcc driver. This also allows to add reset support to STM32F4/F7 SoCs family. As Reset driver is not part of SPL supported drivers, don't bind it in case of SPL to avoid that stm32_rcc_bind() returns an error. Signed-off-by: Patrice Chotard <[email protected]> Reviewed-by: Vikas Manocha <[email protected]>
2017-11-30nds32: board: Support ftsdc010 DM.Rick Chen
AG101P/AE3XX enable ftsdc010 dm flow. Signed-off-by: Rick Chen <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-12 11:47:30 +0000