| Age | Commit message (Collapse) | Author |
|---|
|
Alexander Dahl <[email protected]> says:
Hello,
two patches for header issues I came across when working on (Q)SPI
drivers for atmel boards.
Link: https://lore.kernel.org/r/[email protected]
|
|
CI: https://dev.azure.com/sr0718/u-boot/_build/results?buildId=381&view=results
- cyclic: Fix rollover every 72 min on 32 bits platforms (Patrice)
|
|
Simon Glass <[email protected]> says:
This includes various patches towards implementing the VBE abrec
bootmeth in U-Boot. It mostly focuses on introducing a relocating
SPL-loader so that VBE can run in the limited amount of SRAM available
on many devices.
Another minor new feature is support in VBE for specifying the image
phase when loading from a FIT. This allows a single FIT to include
images for several boot phases, thus simplifying image-creation.
One lingering niggle in this series is that it has a different code path
for sandbox, since it does not support the relocating jump. It should be
possible to resolve this with additional work, but I have not attempted
this so far.
For v2, I have split the first patch into 5 pieces, to make it easier to
see the code-size impact, plus added a few tweaks to reduce code size.
Again, only MMC is supported so far.
Looking ahead, series G will have some more plumbing and H some rk3399
pieces. That should be enough to complete these feature.
Here is a run in my lab, with the VBE ABrec bootmeth. You can see that
VPL runs before memory is set up. SPL sets up memory and can be upgraded
in the field reliably.
$ ub-int vbe
Building U-Boot in sourcedir for rk3399-generic
Bootstrapping U-Boot from dir /tmp/b/rk3399-generic
Writing U-Boot using method rockchip
U-Boot TPL 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58)
Trying to boot from vbe_abrec
load: Firefly-RK3399 Board
Using 'config-3' configuration
Trying 'image-vpl' firmware subimage
Using 'config-3' configuration
Trying 'fdt-3' fdt subimage
U-Boot VPL 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58)
Trying to boot from vbe_abrec
load: Firefly-RK3399 Board
Starting with empty state
VBE: Firmware pick A at 800000
Using 'config-3' configuration
Trying 'spl' firmware subimage
Using 'config-3' configuration
Trying 'fdt-3' fdt subimage
Channel 0: DDR3, 800MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: DDR3, 800MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
U-Boot SPL 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58 -0700)
Trying to boot from vbe_abrec
load: Firefly-RK3399 Board
VBE: Firmware pick A at 900000
load_simple_fit: Skip load 'atf-5': image size is 0!
Relocating bloblist ff8eff00 to 100000: done
ns16550_serial serial@ff1a0000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
U-Boot 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58 -0700)
SoC: Rockchip rk3399
Reset cause: POR
Model: Firefly-RK3399 Board
DRAM: 4 GiB (effective 3.9 GiB)
Core: 314 devices, 33 uclasses, devicetree: separate
MMC: mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0
Loading Environment from SPIFlash... Invalid bus 0 (err=-19)
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
In: serial,usbkbd
Out: serial,vidconsole
Err: serial,vidconsole
Model: Firefly-RK3399 Board
Net: PMIC: RK808
eth0: ethernet@fe300000
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3a0000: USB OHCI 1.0
Bus usb@fe3c0000: USB EHCI 1.00
Bus usb@fe3e0000: USB OHCI 1.0
Bus usb@fe900000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found
scanning bus usb@fe900000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
Link: https://lore.kernel.org/r/[email protected]
|
|
When building without DHCP/PXE configurations (NET disabled),
compilation errors may occur due to mismatched bootargs.
Ensure bootargs related to DHCP/PXE are not enabled if the
corresponding commands are disabled.
include/config_distro_bootcmd.h:443:9: error: expected ‘}’ before
‘BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE’
443 | BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Chanho Park <[email protected]>
Acked-by: Linus Walleij <[email protected]>
|
|
We have a duplicate declaration of spi_mem_default_supports_op() which
was added twice, first with commit af6266c1c27a ("mem: spi-mem: add
declaration for spi_mem_default_supports_op") for v2021.04, and again
with commit 2299076e34f8 ("spi: spi-mem: export
spi_mem_default_supports_op()") for v2021.07.
The first commit is reverted here, because the second better matches the
definition and has a better place in the declaration order.
Note: Linux declares this in a different section of spi-mem.h which is
disabled in U-Boot through `#ifndef __UBOOT__`.
This reverts commit af6266c1c27add8beac7f3365c00b3525a9012c4.
Signed-off-by: Alexander Dahl <[email protected]>
|
|
This is fairly easy to use. The SPL loader sets up some fields in the
spl_image_info struct and calls spl_reloc_prepare(). When SPL is ready
to do the jump it must call spl_reloc_jump() instead of jump_to_image().
Add this logic.
Signed-off-by: Simon Glass <[email protected]>
|
|
When one xPL phase wants to jump to the next, the next phase must be
loaded into its required address. This means that the TEXT_BASE for the
two phases must be different and there cannot be any memory overlap
between the code used by the two phases. It also can mean that phases
need to be moved around to accommodate any size growth.
Having two xPL phases in SRAM at the same time can be tricky if SRAM
is limited, which it often is. It would be better if the second phase
could be loaded somewhere else, then decompressed into place over the
top of the first phase.
Introduce a relocating jump for xPL to support this. This selects a
suitable place to load the (typically compressed) next phase, copies
some decompression code out of the first phase, then jumps to this code
to decompress and start the next phase.
This feature makes it much easier to support Verified Boot for Embedded
(VBE) on RK3399 boards, which have 192KB of SRAM.
Signed-off-by: Simon Glass <[email protected]>
|
|
This function will be used by the relocating jumper too, so add a
typedef to the header file to avoid mismatches.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add some fields to track the VBE state in SPL.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add support for the PCIe busses on Qualcomm platforms,
by using the pcie_dw_common infrastructure.
The driver is based on the Linux driver but only supporting
the "1_9_0" and compatible platforms like:
- sa8540p
- sc7280
- sc8180x
- sc8280xp
- sdm845
- sdx55
- sm8150
- sm8250
- sm8350
- sm8450
- sm8550
- sm8650
- x1e80100
But it has only been tested on:
- sc7280
- sm8550
- sm8650
- x1e80100
It supports setting the IOMMU SID table for supported platforms.
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Replace delay_ns by delay_us which is the field name used into
struct cyclic_info.
Signed-off-by: Patrice Chotard <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Weijie Gao <[email protected]> says:
This patch series migrates MediaTek MT7629 to OF_UPSTREAM
Changes in v2:
* Remove mt7629-rfb.dtb from arch/arm/dts/Makefile
* Add wdt-reboot node to make reset command work
Link: https://lore.kernel.org/r/[email protected]
|
|
Move differences in DT files between upstream Linux DT and U-Boot DT to
mt7629-rfb-u-boot.dtsi.
Remove old copies of mt7629-related clock bindings, .dts, and .dtsi files.
Update defconfig to switch the whole mt7629 SoC to use OF_UPSTREAM.
Signed-off-by: Sam Shih <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
Philippe Reynes <[email protected]> says:
This serie adds the support of sha256_hmac and sha256_hkdf.
A first version was sent several months ago just before the
integration of mbedtls. This new version is based on mbedtls.
The first patch of this serie add the support of hkdf
using mbedtls.
Link: https://lore.kernel.org/r/[email protected]
|
|
Adds the support of key derivation using the scheme hkdf.
This scheme is defined in rfc5869.
Signed-off-by: Philippe Reynes <[email protected]>
Reviewed-by: Raymond Mao <[email protected]>
|
|
Adds the support of the hmac based on sha256.
This implementation is based on rfc2104.
Signed-off-by: Philippe Reynes <[email protected]>
Reviewed-by: Raymond Mao <[email protected]>
|
|
Move env to imx8mq_evk.env
Switch to support BOOTSTD with a bsp bootcmd as fallback.
Signed-off-by: Peng Fan <[email protected]>
|
|
Move env to imx8mm_evk.env
Switch to support BOOTSTD with a bsp bootcmd as fallback.
Signed-off-by: Peng Fan <[email protected]>
|
|
Move env to imx8mn_evk.env
Switch to support BOOTSTD with a bsp bootcmd as fallback.
Signed-off-by: Peng Fan <[email protected]>
|
|
Move env to imx8mp_evk.env.
Switch to support BOOTSTD with a bsp bootcmd as fallback.
Signed-off-by: Peng Fan <[email protected]>
|
|
Switch to support BOOTSTD with a bsp bootcmd as fallback.
Move the env to imx93_evk.env
Signed-off-by: Peng Fan <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series provides a way to keep track of the images used in bootstd,
including the type of each image.
At present this is sort-of handled by struct bootflow but in quite an
ad-hoc way. The structure has become quite large and is hard to query.
Future work will be able to reduce its size.
Ultimately the 'bootflow info' command may change to also show images as
a list, but that is left for later, as this series is already fairly
long. So for now, just introduce the concept and adjust bootstd to use
it, with a simple command to list the images.
This series includes various alist enhancements, to make use of this new
data structure a little easier.
[trini: Drop patch 18 and 19 for now due to size considerations]
Link: https://lore.kernel.org/r/[email protected]
|
|
Export this function so it can be used from other files.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a new 'bootstd images' command, which lists the images which have
been loaded.
Update some existing tests to use it. Provide some documentation about
images in general and this command in particular.
Use a more realistic kernel command-line to make the test easier to
follow.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update this function to add the image to the list.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a file-type parameter to this function and update all users. Add a
proper comment to the function which we are here.
This will allow tracking of the file types loaded by the extlinux
bootmeth.
Signed-off-by: Simon Glass <[email protected]>
|
|
We want to record the type of each file which is loaded. Add an new
parameter for this, to the read_file() method. Update all users.
Make bootmeth_common_read_file() store information about the image that
is read.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
As a first step to recording images and where they came from, update
this function to do so, since it is used by two bootmeths
Create a helper function in the bootflow system, since recorded
images are always associated with bootflows.
Signed-off-by: Simon Glass <[email protected]>
|
|
We want to keep track of images which are loaded, or those which could
perhaps be loaded. This will make it easier to manage memory allocation,
as well as permit removal of the EFI set_efi_bootdev() feature.
Add a list of these, attached to the bootflow. For now the list is
empty.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use an alist for this data structure as it is somewhat simpler to
manage. This means that bootstd holds a simple list of bootflow structs
and can drop it at will, without chasing down lists.
Signed-off-by: Simon Glass <[email protected]>
|
|
This list is only used by two functions, which can be updated to iterate
through the global list. Take this approach, which allows the bootdev
list to be dropped.
Overall this makes the code slightly more complicated, but will allow
moving the bootflow list into an alist
Signed-off-by: Simon Glass <[email protected]>
|
|
Provide a function which is safe to call in the 'unbind' path, which
returns the bootstd priv data if available.
Signed-off-by: Simon Glass <[email protected]>
|
|
This relates to more than just the bootdev, since there is a global list
of bootflows. Move the function to the bootstd file and rename it.
Signed-off-by: Simon Glass <[email protected]>
Acked-by: Heinrich Schuchardt <[email protected]>
|
|
This relates to more than just the bootdev, since there is a global list
of bootflows. Move the function to the bootstd file and rename it.
Signed-off-by: Simon Glass <[email protected]>
|
|
flexibility"
Dmitry Rokosov <[email protected]> says:
This series consists of three patches.
The first patch modifies the function documentation style in the
include/fdt_support.h file to comply with kernel-doc requirements.
The second patch modifies the board_fdt_chosen_bootargs() function to
return a const char* type. This change clarifies to the caller that the
returned string should neither be freed nor modified. It aligns with the
existing fdt_setprop() function, which already utilizes a const char*
parameter. This promotes consistency within the codebase and enhances
code safety by preventing unintended modifications to the returned
string.
The third patch addresses the need for flexibility in providing kernel
command line arguments (bootargs) for different kernel images within the
same U-Boot environment. It introduces a read-only (RO) fdt_property
argument to the board_fdt_chosen_bootargs() function, allowing access to
the original chosen/bootargs data. This is crucial for scenarios where
different kernel versions require distinct console setups (e.g., ttyS0
for vendor kernels and ttyAML0 for upstream kernels). By enabling board
developers to either merge or replace the original bootargs, this
patch enhances the configurability of U-Boot for various kernel
images without relying on outdated configurations like CMDLINE_EXTEND.
CI/CD results: https://github.com/u-boot/u-boot/pull/716/checks
Link: https://lore.kernel.org/r/20241220-board_fdt_chosen_bootargs_improvements-v1-0-f6a7181787c5@salutedevices.com
|
|
Sometimes, it is necessary to provide an additional bootargs string to
the kernel command line.
We have a real scenario where one U-Boot blob needs to boot several
kernel images: the vendor-patched kernel image and the latest upstream
kernel image. The Amlogic (Meson architecture) tty driver has different
tty suffixes in these kernels: the vendor uses 'ttySx', while the
upstream implementation uses 'ttyAMLx'. The initial console setup is
provided to the kernel using the kernel command line (bootargs). For the
vendor kernel, we should use 'console=ttyS0,115200', while for the
upstream kernel, it must be 'console=ttyAML0,115200'. This means we have
to use different command line strings depending on the kernel version.
To resolve this issue, we cannot use the CMDLINE_EXTEND kernel
configuration because it is considered legacy and is not supported for
the arm64 architecture. CMDLINE_EXTEND is outdated primarily because we
can provide additional command line strings through the
'chosen/bootargs' FDT node. However, U-Boot uses this node to inject the
U-Boot bootargs environment variable content, which results in U-Boot
silently overriding all data in the 'chosen/bootargs' node. While we do
have the board_fdt_chosen_bootargs() board hook to address such issues,
this function lacks any FDT context, such as the original value of the
'chosen/bootargs' node.
This patch introduces a read-only (RO) fdt_property argument to
board_fdt_chosen_bootargs() to share the original 'chosen/bootargs' data
with the board code. Consequently, the board developer can decide how to
handle this information for their board setup: whether to drop it or
merge it with the bootargs environment.
Signed-off-by: Dmitry Rokosov <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
It should be structured this way to demonstrate to the caller that
freeing the return value is unnecessary and that the caller cannot
modify it.
The function fdt_setprop() includes a parameter with a const char*
prototype, so it is better to use the const qualifier.
Signed-off-by: Dmitry Rokosov <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
No errors from kernel-doc with this patch applied:
$ ./scripts/kernel-doc -v -none include/fdt_support.h
include/fdt_support.h:17: info: Scanning doc for arch_fixup_fdt
include/fdt_support.h:37: info: Scanning doc for fdt_root
include/fdt_support.h:48: info: Scanning doc for fdt_chosen
include/fdt_support.h:59: info: Scanning doc for fdt_initrd
include/fdt_support.h:100: info: Scanning doc for fdt_fixup_memory
include/fdt_support.h:115: info: Scanning doc for fdt_fixup_memory_banks
include/fdt_support.h:148: info: Scanning doc for fdt_fixup_display
include/fdt_support.h:176: info: Scanning doc for fdt_record_loadable
include/fdt_support.h:205: info: Scanning doc for ft_board_setup
include/fdt_support.h:218: info: Scanning doc for board_rng_seed
include/fdt_support.h:231: info: Scanning doc for board_fdt_chosen_bootargs
include/fdt_support.h:251: info: Scanning doc for ft_system_setup
include/fdt_support.h:266: info: Scanning doc for fdt_shrink_to_minimum
include/fdt_support.h:301: info: Scanning doc for fdt_copy_fixed_partitions
include/fdt_support.h:314: info: Scanning doc for fdt_translate_address
include/fdt_support.h:327: info: Scanning doc for fdt_translate_dma_address
include/fdt_support.h:342: info: Scanning doc for fdt_get_dma_range
include/fdt_support.h:464: info: Scanning doc for fdt_get_cells_len
include/fdt_support.h:480: info: Scanning doc for fdtdec_get_child_count
include/fdt_support.h:500: info: Scanning doc for fdt_kaslrseed
Signed-off-by: Dmitry Rokosov <[email protected]>
Acked-by: Heinrich Schuchardt <[email protected]>
|
|
Raymond Mao <[email protected]> says:
Motivations for changes:
Current SMBIOS library and command-line tool is not fully matching with
the requirements:
1. Missing support for other mandatory types (#7, #9, #16, #17, #19).
2. Only a few platforms support SMBIOS node from the device tree.
3. Values of some fields are hardcoded in the library other than fetching
from the device hardware.
4. Embedded data with dynamic length is not supported (E.g. Contained
Object Handles in Type #2 and Contained Elements in Type #3)
Changes:
1. Refactor the SMBIOS library and command-line tool to better align with
the SMBIOS spec.
2. Create an arch-specific driver for all aarch64-based platforms to fetch
SMBIOS private data from the device hardware (processor and cache).
3. Create a sysinfo driver to poppulate platform SMBIOS private data.
4. Add generic SMBIOS DTS file for arm64 platforms for those common strings
and values which cannot be retrieved from the system registers.
Vendors can create their own SMBIOS node using this as an example.
For those boards without SMBIOS nodes, this DTS file can be included to
have a generic SMBIOS information of the system.
5. Add support for Type #7 (Cache Information) and link its handles to
Type #4.
6. To minimize size-growth for those platforms which have not sufficient
ROM spaces or the platforms which don't need detailed SMBIOS
information, new added fields are only being built when kconfig
GENERATE_SMBIOS_TABLE_VERBOSE is selected.
Once this patch is acceptted, subsequent patch sets will add other missing
types (#9, #16, #17, #19).
Tests:
To test this with QEMU arm64, please follow the guide on dt_qemu.rst to
get a merged DT to run with.
```
qemu-system-aarch64 -machine virt -machine dumpdtb=qemu.dtb
cat <(dtc -I dtb qemu.dtb) <(dtc -I dtb ./dts/dt.dtb | grep -v /dts-v1/) \
| dtc - -o merged.dtb
qemu-system-aarch64 -machine virt -nographic -bios u-boot.bin \
-dtb merged.dtb
```
Link: https://lore.kernel.org/r/[email protected]
|
|
Update the cmd according to the changes of the smbios library:
1. Refactor smbios cmd print functions to match the content defined
by the specification.
2. Add new print functions for Type 3, 4 and 7.
3. Remove the fallback string "Not specified" from smbios_get_string,
as the spec requires a NULL output for those undefined strings.
4. Update the test_cmd_smbios_sandbox pytest expected result to
align with the smbios library changes and add new pytest
test_cmd_smbios_sysinfo_verbose to test the verbose smbios
output.
Signed-off-by: Raymond Mao <[email protected]>
|
|
Current smbios library does not fully match to the specification.
It hardcodes values instead of exposing values from the device.
It does not reserve the space to support dynamic length for
contained object handles or elements and misses the handling of
a few of fields.
The refactoring of this patch includes:
1. Expose values from device via sysinfo interface.
2. Replace smbios_add_prop with smbios_add_prop_si to allow getting
string values from sysinfo.
3. Add smbios_get_val_si to get values from sysinfo or device tree.
4. Use sysinfo_get_data to get data area.
5. Reserve the space of contained object handles and elements.
6. Miscellaneous fixes in smbios.
Signed-off-by: Raymond Mao <[email protected]>
|
|
Add sysinfo driver to retrieve smbios information (Type 4 and 7).
So that the smbios library can use it for getting values from the
hardware platform instead of device tree.
Signed-off-by: Raymond Mao <[email protected]>
|
|
Add interface for sysinfo to access a data area from the platform.
This is useful to save/read a memory region of platform-specific
data.
Signed-off-by: Raymond Mao <[email protected]>
|
|
Move the smbios field definitions to a separated simple headfile,
which is a prerequisite to be included by dts files.
Add new definitions for cache information.
This patch also includes a few of code optimizations in smbios.
Signed-off-by: Raymond Mao <[email protected]>
Acked-by: Heinrich Schuchardt <[email protected]>
|
|
Rather than doing autoprobe within the driver model code, move it out to
the board-init code. This makes it clear that it is a separate step from
binding devices.
For now this is always done twice, before and after relocation, but we
should discuss whether it might be possible to drop the post-relocation
probe.
For boards with SPL, the autoprobe is still done there as well.
Note that with this change, autoprobe happens after the
EVT_DM_POST_INIT_R/F events are sent, rather than before.
Link: https://lore.kernel.org/u-boot/[email protected]/
Signed-off-by: Simon Glass <[email protected]>
|
|
Replace magic numbers in buckval2votl() & buckvolt2val() with macros to
help with clarity and correlate what the numbers correspond to in the
TPS65219 datasheet.
Signed-off-by: Shree Ramamoorthy <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
|
|
fix following error by using same ENV_MEM_LAYOUT_SETTINGS with rk35xx:
U-Boot 2025.01-rc3-00001-g1527c7dcdb01 (Dec 02 2024 - 22:57:18 +0000)
:
Retrieving file: /boot/extlinux/../nixos/dhqjsnprmzjxncil3m0g9l09a479crn3-linux-6.12.1-Image
Retrieving file: /boot/extlinux/../nixos/6fq8fmmab31yxdwcs7zw44p78fq9fy1s-initrd-linux-6.12.1-initrd
append: init=/nix/store/yjbxgzf1vkwbw6ab738bf4kxazhyypa1-nixos-system-rock-5b-25.05.20241201.ac35b10/init console=ttyS2,1500000n8 console=ttyAMA0,115200n8 console=tty0 loglevel=7
Retrieving file: /boot/extlinux/../nixos/dhqjsnprmzjxncil3m0g9l09a479crn3-linux-6.12.1-dtbs/rockchip/rk3399-rock-4se.dtb
Moving Image from 0x2080000 to 0x2200000, end=0x60d0000
ERROR: RD image overlaps OS image (OS=2200000..60d0000)
Boot failed (err=-14)
$ ls -lh boot/nixos/
total 84M
-r--r--r-- 1 root root 24M Jan 1 1970 6fq8fmmab31yxdwcs7zw44p78fq9fy1s-initrd-linux-6.12.1-initrd
-r--r--r-- 1 root root 62M Jan 1 1970 dhqjsnprmzjxncil3m0g9l09a479crn3-linux-6.12.1-Image
dr-xr-xr-x 36 root root 4.0K Jan 1 1970 dhqjsnprmzjxncil3m0g9l09a479crn3-linux-6.12.1-dtbs
similar problem was fixed for rk35xx by:
commit 69b73877f02c ("rockchip: rk35xx: expand space for decompressed kernel")
Signed-off-by: FUKAUMI Naoki <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The clock and power DT includes for rk3066a and rk3188 are now
available in the dts/upstream directory, so remove the ones that
are now redundant.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Khadas Edge2 is a Rockchip RK3588S based SBC (Single Board Computer)
by Khadas.
There are tree variants depending on the DRAM size : 8G and 16G.
Specification:
Rockchip RK3588S SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB memory LPDDR4x
Mali G610MP4 GPU
3x MIPI CSI 4x lanes
2x MIPI-DSI DPHY 4x lanes
32/64GB eMMC
1x USB 2.0, 1x USB 3.0, 2x USB-Type-C
1x HDMI 2.1 output, 1x DP 1.4 output
USB PD over USB Type-C
Kernel commit:
04d552993522 ("arm64: dts: rockchip: Add Khadas edge2 board")
Signed-off-by: Jacobe Zang <[email protected]>
|
