| Age | Commit message (Collapse) | Author |
|---|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Marek Vasut <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Peng Fan <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Peng Fan <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Peng Fan <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Peng Fan <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Peng Fan <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Peng Fan <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Peng Fan <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Łukasz Majewski <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Łukasz Majewski <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Łukasz Majewski <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Łukasz Majewski <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
|
|
This adds support for the Kontron Electronics OSM-S i.MX93 SoM
and the matching baseboard BL i.MX93.
The SoM hardware complies to the Open Standard Module (OSM) 1.1
specification, size S (https://sget.org/standards/osm).
Signed-off-by: Frieder Schrempf <[email protected]>
|
|
This adds support for the Kontron Electronics OSM-S i.MX8MP SoM
and the matching baseboard BL i.MX8MP.
The SoM hardware complies to the Open Standard Module (OSM) 1.1
specification, size S (https://sget.org/standards/osm).
Signed-off-by: Frieder Schrempf <[email protected]>
|
|
The nfsroot constructed as part of the default Analog Devices boot
strategy is missing a semicolon between the server ip and the root path
itself. This adds the missing semicolon.
Signed-off-by: Greg Malysa <[email protected]>
|
|
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Prepare v2026.01-rc3
|
|
Introduce fastboot block flashing functions and helpers
to be shared with the MMC implementation.
The write logic comes from the mmc implementation, while
the partition lookup is much simpler and could be extended.
For the erase logic, allmost no block drivers exposes the
erase operation, except mmc & virtio, so in order to allow
erasiong any partition a soft-erase logic has been added
to write zero-ed buffers in a loop.
Signed-off-by: Dmitrii Merkurev <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Use global st_runtime.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Save the address of the EFI runtime as a global variable.
This allows to simplify the setup of tests.
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add missing Sphinx comments in include/test/ut.h
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-snapdragon into next
- Qualcomm RPMh cmd_db_read_slave_id() & cmd_db_read_aux_data()
- Initial Interconnect implementation + Qualcomm RPMh support
|
|
Let's introduce the Generic System Interconnect subsystem based on
the counterpart Linux framework which is used to vote for bandwidth
across multiple SoC busses.
Documentation for the Linux Generic System Interconnect Subsystem can
be found at [1].
Each bus endpoints are materialised as "nodes" which are linked together,
and the DT will specify a pair of nodes to enable and set a bandwidth
on the route between those endpoints.
The hardware resources that provide those nodes and provides the way
to vote for the bandwidth are called "providers".
The Interconnect uclass code is heavily based on the Linux one, with
some small differences:
- nodes are allocated as udevices instead of Linux idr_alloc()
- tag management is minimal, only normal xlate is supported
- getting nodes states at probe is not implemented
- providers are probed on demand while the nodes links are traversed
- nodes are populated on bind
- id management is simplified, static IDs and dynamics IDs can be used
- identical consume API as Linux, only implementation differs
Fully tested with associated DM test suite.
[1] https://docs.kernel.org/driver-api/interconnect.html
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-nand-flash
CI: https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/28408
This pull request enhances NAND and SPI flash support, primarily
focusing on the Airoha EN7523 platform. The Airoha SPI driver receives
a major update, adding DMA, dual/quad-wire modes, and a critical
workaround to prevent flash damage if the UART_TXD pin shorts to Ground.
New chips supported include FudanMicro FM25S01A SPI-NAND and several
Winbond SPI NOR devices. Fixes include correcting Kconfig dependencies,
updating the mtd benchmark command to use lldiv(), and addressing minor
bugs in the generic spi-mem and SPL NAND code.
|
|
When building with clang, we see warnings such as:
error: field max_size within 'struct smbios_type7' is less aligned than
'union cache_size_word' and is usually due to 'struct smbios_type7'
being packed, which can lead to unaligned accesses
[-Werror,-Wunaligned-access]
when building drivers/sysinfo/smbios.c. Resolve this error by packing
the unions as well after verifying they are complete (16 or 32 bits).
Reviewed-by: Raymond Mao <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Add support for FudanMicro FM25S01A SPI NAND.
This driver is ported from linux v6.18 and tested on a MT7981 board.
Link: https://lore.kernel.org/linux-mtd/[email protected]/
Reviewed-by: Mikhail Kshevetskiy <[email protected]>
Signed-off-by: Tianling Shen <[email protected]>
|
|
successful get_info
Not all ->get_info implementations necessarily populate all the string
members of struct disk_partition.
Currently, only part_get_info_by_type() (and thereby part_get_info)
ensure that the uuid strings are initialized; part_get_info_by_type()
and part_get_info_by_uuid() do not. In fact, the latter could lead to
a false positive match - if the ->get_info backend does not populate
info->uuid, stale contents in info could cause the strncasecmp() to
succeed.
None of the functions currently ensure that the ->name and ->type
strings are initialized.
Instead of forcing all callers of any of these functions to
pre-initialize info, or all implementations of the ->get_info method
to ensure there are valid C strings in all four fields, create a small
helper function and factor all invocations of ->get_info through that.
This also consolidates the -ENOSYS check and standardizes on using
log_debug() for reporting absence, instead of the current mix of
PRINTF and log_debug(). It does mean we have to special-case -ENOSYS
in the error cases inside the loops in the _by_uuid() and _by_name()
functions, but it's still a net win in #LOC.
Acked-by: Quentin Schulz <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
Tested-by: Anshul Dalal <[email protected]>
|
|
Partially reverted commit "soc: qcom: cmd-db: drop unused
functions" by restoring only the cmd_db_read_slave_id() and
cmd_db_read_aux_data() functions, which were removed in that
commit. These functions are required for the RPMH Power Domain
Driver.
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Signed-off-by: Balaji Selvanathan <[email protected]>
Signed-off-by: Aswin Murugan <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>> ---
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
%s/programmaticaly/programmatically/
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq
CI: https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq/-/pipelines/28272
- Support scmi v3.2 CONFIG_SET for clock protocol
- A patchset from Marek to optimize the scmi clk booting time
- Fix scmi clk set_parent in non-CCF case
- Drop mmu_set_region_dcache_behaviour in firmware scmi
|
|
Support for using "u-boot,dm-..." rather than "bootph-..." has been
deprecated since February 2023. Any platforms using this have had a
console message saying to migrate by 2023.07. Go and remove all support
here now, for the v2026.01 release.
The results of this change that aren't clear from the above are that we
still have a checkpatch.pl error message, and document in
doc/develop/spl.rst that they have been migrated since 2023. We also
change the key2dtsi.py tool to use the correct bootph phase rather than
the legacy phase.
Signed-off-by: Tom Rini <[email protected]>
|
|
SCMI v3.2 introduces a new clock CONFIG_SET message format that can
optionally carry also OEM specific configuration values beside the usual
clock enable/disable requests. Add support to use such new format when
talking to a v3.2 compliant SCMI platform.
Support existing enable/disable operations across different clock protocol
versions: this patch still does not add protocol operations to support the
new OEM specific optional configuration capabilities.
No functional change for the SCMI drivers users of the related enable and
disable clock operations.
[Marek: Remodel after Linux e49e314a2cf7 ("firmware: arm_scmi: Add clock v3.2 CONFIG_SET support")
Support both old < 2.1 and new >= 2.1 protocol versions.
Update commit message based on Linux one]
Signed-off-by: Vinh Nguyen <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Alice Guo <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Fix multiple instances of copy-paste errors. Fill in missing
headers for CLOCK_GET_PERMISSIONS message and response.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Alice Guo <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Mikhail Kshevetskiy <[email protected]> says:
This patch series adds basic support for the boards based on Airoha
EN7523/EN7529/EN7562 SoCs. Due to ATF restrictions these boards are
able to run 32-bit OS only.
This patch series adds support for the following hardware:
* console UART
* ethernet controller/switch
* spinand flash (in non-dma mode)
The following issues may be expected:
* Extra slow UBI attaching in U-Boot (up to 20 sec with fastmap enabled).
This is caused by the lack of DMA support in the U-Boot airoha-snfi driver.
* Linux airoha-snfi driver in some cases might damage you flash data
(see: https://lore.kernel.org/lkml/[email protected]/)
* Latest linux kernel is recommended to properly support flashes
with more than one plane per lun
(see: https://lore.kernel.org/lkml/[email protected]/)
* It's NOT recommended to use flashes working in continuous mode because
U-Boot airoha-snfi driver does not support such flashes properly.
The patches was tested on the board:
- SoC: Airoha EN7562
- RAM: 512 MB
- SPI NAND: 4 Gbit, made by Toshiba
- Linux boot: was NOT tested
The U-Boot was chain-loaded from the running U-Boot. Airoha ATF-2.3 does
not allow easily chain-loading of U-Boot from U-Boot, so a special FIT
image (mimic linux kernel) was created
1) Create u-boot.its file with the following contents:
=== cut here ===
/dts-v1/;
/ {
description = "ARM OpenWrt FIT (Flattened Image Tree)";
#address-cells = <1>;
images {
u-boot-ram {
description = "OpenWrt U-Boot RAM image";
data = /incbin/("u-boot.bin.lzma");
type = "kernel";
arch = "arm";
os = "linux";
compression = "lzma";
load = <0x81e00000>;
entry = <0x81e00000>;
hash@1 {
algo = "crc32";
};
hash@2 {
algo = "sha1";
};
};
fdt-1 {
description = "OpenWrt device tree blob";
data = /incbin/("dts/upstream/src/arm/airoha/en7523-evb.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
hash@1 {
algo = "crc32";
};
hash@2 {
algo = "sha1";
};
};
};
configurations {
default = "config-ram-uboot";
config-ram-uboot {
description = "OpenWrt RAM U-Boot";
kernel = "u-boot-ram";
fdt = "fdt-1";
};
};
};
==================
2) Create u-boot.itb image to chain-load new u-boot from the old one
lzma_alone e u-boot.bin u-boot.bin.lzma
mkimage -f u-boot.its u-boot.itb
3) Load new u-boot from the old one
U-Boot> tftpboot u-boot.itb && bootm
Link: https://lore.kernel.org/r/[email protected]
|
|
Introduce reset capability for EN7523 device-tree binding
Signed-off-by: Mikhail Kshevetskiy <[email protected]>
|
|
Basic support for en7523/en7529/en7562 SoCs. Within a patch
only serial console will be supported.
Signed-off-by: Mikhail Kshevetskiy <[email protected]>
|
|
If missing, lbaint_t typedef will not be found in some cases.
[The proper fix for the commit above at the time would have been to
include ide.h as only since commit 1a73661bc7a7 ("dm: Add a new header
for block devices") is the typedef in blk.h]
Fixes: 04735e9c5578 ("Fix ext2/ext4 filesystem accesses beyond 2TiB")
Signed-off-by: Quentin Schulz <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2026-01-rc2
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/28208
Documentation:
* bootstd: Describe environment variable extension_overlay_addr
environment and remove extension support from TODO list
EFI:
* Correct the detection of the video mode in the EFI payload app:
- Use struct efi_gop_mode_info in the definition of struct
efi_entry_gopmode.
- In function get_mode_from_entry() use the correct type for the video
mode structure.
* Use a valid error code as return value in efi_store_memory_map().
* Avoid a memory leak for the variable name in efi_bl_create_block_device().
* Correct the code indentation in efi_uc_stop().
* Correct the description of struct efi_priv.
* Fix typos in code comments.
Other:
* qfw: Add more fields and a heading to qfw list
* Fix the support for ACPI pass-through on ARM and RISC-V:
Avoid zeroing out the XSDT address
* test: provide unit test for 'acpi list' command
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmkNj/kACgkQxIHbvCwF
# GsS8NQ/6Aj+Z54HJTIEfoXssvElLr5ATactrCxszq42i/yy6dLqa2Ym1afG6w1XS
# 1ZbCeU/bCXFke5Tsz+x89gEfckUm83oTwngwcID0WR1qn8mWjwR7tM5MuORq8NxU
# 7NwLuFs9O/QZihagKdz6hv1/Y+cBwiAYLY16EYVSuUlbLaKQo3QvxwWkqG3jdKWV
# Rm58/PolU+2h04MBwP0SxSduX4OyRF/tMOGjf5RGLyqCyj8kIgdu7PvUAPMM+Gps
# KemL59V0Bdv8hlF4JknmPz+idtZg2nHIDdNrBZvoxwzwGQeRZ1YXAMruRxZXqDYL
# tiuDp6HMv/GfIIGkz14tJtJMdboaAybAnluPWGalx8JQJqJzEPww0R+9s4KKQeWL
# mHgRyl6PxVV9p19f79Qq6q6ETwrFDX0YH3pdrGUk3DBa3lDt0UsEAnuW4FvaJ8tx
# 3PMrjKAxpxocT0hglsMVnptnfvDEigMsjwH/TWrau83mY+juxFQLjm+U4vye+qCa
# 4zXjjLas18+eRcrv2KxU7teakyi1Jp+WbqHq37L26YcQMaLq/RkBc0bTrsreKKLu
# jprYFpvc7EJpH2Fd1XWaZ2EnxXcVSJSvrY/iwRQqb6wbwQ6XGtMvSh3IFY8IzAoh
# N2Pj78oaYqyL1q/TftuZWhEHo3a0M/HfM4D+oMSHzJtWCb0wZHE=
# =OGcS
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Nov 2025 12:21:45 AM CST
# gpg: using RSA key 6DC4F9C71F29A6FA06B76D33C481DBBC2C051AC4
# gpg: Good signature from "Heinrich Schuchardt <[email protected]>" [unknown]
# gpg: aka "[jpeg image of size 1389]" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6DC4 F9C7 1F29 A6FA 06B7 6D33 C481 DBBC 2C05 1AC4
|
