summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2023-12-21bootm: Create a new boot_run() function to handle bootingSimon Glass
Create a common function used by the three existing bootz/i/m_run() functions, to reduce duplicated code. Signed-off-by: Simon Glass <[email protected]> Suggested-by: Tom Rini <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-21bootm: Create a function to run through the booti statesSimon Glass
In a few places, the booti command is used to handle a boot. We want these to be done without needing CONFIG_CMDLINE, so add a new booti_run() function to handle this. So far this is not used. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-21bootm: Create a function to run through the bootz statesSimon Glass
In a few places, the bootz command is used to handle a boot. We want these to be done without needing CONFIG_CMDLINE, so add a new bootz_run() function to handle this. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-21bootm: Create a function to run through the bootm statesSimon Glass
In quite a few places, the bootm command is used to handle a boot. We want these to be done without needing CONFIG_CMDLINE, so add a new bootm_run() function to handle this. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-21bootm: Tidy up boot_selected_os()Simon Glass
Use struct bootm_info with this function, to avoiding needing to create a new one. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-21bootm: Rename do_bootm_states() to bootm_run_states()Simon Glass
Rename the function to bootm_run_states() to better indicate ts purpose. The 'do_' prefix is used to indicate a command processor, which this is now not. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-21bootm: Drop arguments from do_bootm_states()Simon Glass
Use the bootm_info struct to hold the information required by bootm. Now that none of the functions called from do_bootm_states() needs an argv[] list, change the arguments of do_bootm_states() as well. Take care to use the same value for boot_progress even though it is a little inconsistent. For booti make sure it only uses argv[] and argc at the top of the function, so we can eventually refactor to remove these parameters. With bootm, some OSes need access to the arguments provided to the command, so set these up in the bootm_info struct, for bootm only. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-21bootm: Move do_bootm_states() comment to header fileSimon Glass
This is an exported function, so move the function comment to the bootm.h header file. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-21bootm: Add more fields to bootm_infoSimon Glass
Add fields for the three bootm parameters and other things needed for booting. Also add a helper to set up the struct correctly. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-21bootm: Adjust arguments of boot_os_fnSimon Glass
Adjust boot_os_fn to use struct bootm_info instead of the separate argc, argv and image parameters. Update the handlers accordingly. Few of the functions make use of the arguments, so this improves code size slightly. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-21bootm: Create a struct for argument informationSimon Glass
Some OS functions require the arguments to the 'bootm' command. This is inconvenient for two reasons. Firstly, there may not be any actual command, if CMDLINE is not enabled and programmatic boot is being used. Secondly, most functions don't require the arguments, so it is inefficient to pass them when not needed. For example it increases code size. Create a new struct which holds the arguments, which can be used if needed. Add the images pointer as well, since this is commonly needed. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-21iommu: add a connect opCaleb Connolly
Add an optional iommu callback to be invoked before a device probes. This can be used to configure the IOMMU in preparation for the device (e.g. by allocating a context bank) Signed-off-by: Caleb Connolly <[email protected]>
2023-12-21include: env: ti: ti_common: Run main_cpsw0_qsgmii_phyinit conditionallyManorit Chawdhry
The main_cpsw0_qsgmii_phyinit command is defined only for certain TI SoCs which have the do_main_cpsw0_qsgmii_phyinit variable set. Add a check to ensure that the main_cpsw0_qsgmii_phyinit command is run only for such SoCs. Signed-off-by: Manorit Chawdhry <[email protected]> Signed-off-by: Siddharth Vadapalli <[email protected]> Reviewed-by: Tom Rini <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]>
2023-12-21include: Further cleanup includesTom Rini
Add some missing headers such as <linux/errno.h> or <linux/types.h> or <linux/kernel.h> to header files that make direct usage of things provided by these headers. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2023-12-21global: Rework architecture global_data.h to include <linux/types.h>Tom Rini
In most cases, the architecture global data currently makes use of assorted linux types, but does not include <linux/types.h> to provide them. Add <linux/types.h> instead of relying on indirect inclusion. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2023-12-21arc: Cleanup and audit usage of <config.h>Tom Rini
We need to include <config.h> directly when a file needs to have something such as CFG_SYS_SDRAM_SIZE referenced as this file is not automatically globally included and is most commonly indirectly included via common.h. Remove most cases of arc including config.h directly, but add it where needed. Further clean up the tb100 board config.h file so that we don't rely on config.h being included there for a value used in a single place. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2023-12-21qe: Add <config.h> to linux/immap_qe.hTom Rini
Given how we define QE_MURAM_SIZE today, this header needs to have <config.h> added to it. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2023-12-21global: Restrict use of '#include <linux/kconfig.h>'Tom Rini
In general terms, we -include include/linux/kconfig.h and so normal U-Boot code does not need to also #include it. However, for code which is shared with userspace we may need to add it so that either our full config is available or so that macros such as CONFIG_IS_ENABLED() can be evaluated. In this case make sure that we guard these includes with a test for USE_HOSTCC so that it clear as to why we're doing this. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2023-12-19board: lg: x3-t30: switch to DM pinmuxSvyatoslav Ryhel
Drop the pinmux setup in the board in favor of setting it up in the device tree. Device tree nodes match nodes used for the Linux device tree and are set according to the service manual. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19drivers: gpio: implement PALMAS GPIO cellSvyatoslav Ryhel
Add gpio driver for TI Palmas series PMIC. This has 8 gpio which can work as input/output. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19drivers: gpio: implement MAX77663 GPIO cellSvyatoslav Ryhel
MAXIM Semiconductor's PMIC, MAX77663 has 8 GPIO pins and 3 GPIO-like pins. It also supports interrupts from these pins. Add GPIO driver for these pins to control via GPIO APIs. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19Merge patch series "Add support for MediaTek MT8365 EVK Board"Tom Rini
Julien Masson <[email protected]> says: This patch series add the support for the MediaTek MT8365 EVK Board [1]. Most of the code have been copied/adapted from Linux tag v6.7-rc2. For now we only enable/test these features: Boot, UART, Watchdog and MMC. [trini: This includes two clocks not listed in the Linux binding, which needs resyncing later]
2023-12-19dt-bindings: clock: add Mediatek MT8365 pinctrl bindingsJulien Masson
This adds the pinctrl bindings for Mediatek MT8365 SoC based on the dt-bindings in Linux tag v6.7-rc2. (commit 8b4c397d88d97d4fd9c3f3527aa66688b1a3387a) Signed-off-by: Julien Masson <[email protected]>
2023-12-19arm: mediatek: add support for MediaTek MT8365 SoCJulien Masson
This patch adds basic support for MediaTek MT8365 SoC. The dtsi has been copied from Linux source code tag v6.7-rc2. (commit 9b5d64654ea8f51fe1e8e29ca1777b620be8fb7c) Signed-off-by: Julien Masson <[email protected]>
2023-12-19dt-bindings: power: add power-domain header for MediaTek MT8365 SoCJulien Masson
Add power-domain header for MediaTek MT8365 SoC copied from Linux source code tag v6.7-rc2. (commit a1571f1f333c2fced076f0d54ed771d1838d827f) Signed-off-by: Julien Masson <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]>
2023-12-19dt-bindings: clock: add Mediatek MT8365 SoC clock bindingsJulien Masson
This adds the clock bindings for Mediatek MT8365 SoC based on the dt-bindings in Linux tag v6.7-rc2. (commit c61978175ac1337f028ac1f956666f16db84f4e5) Signed-off-by: Julien Masson <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]>
2023-12-19arm: vexpress64: juno: Allow boot from VirtIORobert Catherall
The AEM and Juno FVPs (Fixed Virtual Platforms) support a VirtIO disc interface. Adding VIRTIO to the list of boot devices allows these FastModel platforms to boot from 'disc' in the same way the hardware counterpart can boot from SATA or USB. This is a NOP if CONFIG_CMD_VIRTIO is not enabled, so no impact on Juno hardware (which is built with vexpress_aemv8a_juno_defconfig) Signed-off-by: Robert Catherall <[email protected]> Reviewed-by: Andre Przywara <[email protected]>
2023-12-19net: wget: Support non-default HTTP portMarek Vasut
Currently the wget command is hard wired to HTTP port 80. This is inconvenient, as it is extremely easy to start trivial HTTP server as an unprivileged user using e.g. python http module to serve the files, but such a server has to run on one of the higher ports: " $ python3 -m http.server -d $(pwd) 8080 " Make it possible to configure HTTP server port the same way it is possible to configure TFTP server port, using environment variable 'httpdstp' (similar to 'tftpdstp'). Retain port 80 as the default fallback port. This way, users can start their own trivial server and conveniently download whatever files they need into U-Boot. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Tom Rini <[email protected]> Reviewed-by: Ramon Fried <[email protected]>
2023-12-18Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-riscv ↵Tom Rini
into next - VisionFive2: Enable CONFIG_SYSRESET - StarFive: Modify starfive timer driver - AMD/Xilinx: Add MicroBlaze V support - Unmatched: Migrate to text environment
2023-12-18Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-spi ↵Tom Rini
into next - spi_nor_read_sfdp_dma_unsafe (Vaishnav) - w25q01/02 (Jim)
2023-12-18Merge tag 'v2024.01-rc5' into nextTom Rini
Prepare v2024.01-rc5
2023-12-18riscv: sifive: unmatched: migrate to text environmentYong-Xuan Wang
Migrate to the new environment format and drop most of the config.h. Signed-off-by: Yong-Xuan Wang <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-18riscv: Add support for AMD/Xilinx MicroBlaze VMichal Simek
MicroBlaze V is new AMD/Xilinx soft-core 32bit RISC-V processor IP. It is hardware compatible with classic MicroBlaze processor. The patch contains initial wiring and configuration for initial HW design with memory, cpu, interrupt controller, timers and uartlite console (interrupt controller is listed but U-Boot is not using it). Provided DT is just describing one configuration and should be taken only as example. Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Leo Yu-Chi Liang <[email protected]> Reviewed-by: Padmarao Begari <[email protected]>
2023-12-17cmd: bootefi: move library interfaces under lib/efi_loaderAKASHI Takahiro
In the prior commits, interfaces for executing EFI binary and boot manager were carved out. Move them under efi_loader directory so that they can be called from other places without depending on bootefi command. Only efi_selftest-related code will be left in bootefi.c. Signed-off-by: AKASHI Takahiro <[email protected]>
2023-12-17cmd: bootefi: re-organize do_bootefi()AKASHI Takahiro
Replicate some code and re-organize do_bootefi() into three cases, which will be carved out as independent functions in the next two commits. Signed-off-by: AKASHI Takahiro <[email protected]>
2023-12-15Merge tag 'clk-2024.01-next' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-clk into next clock patches for u-boot/next The main thing in here is Igor's conversion of soc_clk_dump to a clk_ops member. There's also a write-protect feature for nuvoton clocks. Signed-off-by: Sean Anderson <[email protected]>
2023-12-15board: ti: k3: Remove need for CFG_SYS_SDRAM_BASEAndrew Davis
The base address of extended DDR does not change across the K3 family. Setting this per SoC is not needed. Remove this definition to help remove the last bits from K3 include/configs/*.h files. Signed-off-by: Andrew Davis <[email protected]>
2023-12-15Merge tag 'u-boot-stm32-20231215' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm into next _ run savedefconfig on all STM32 defconfig STM32 MCU: _ Sync stm32f469-disco DT with Linux 6.5 _ rework ltdc node for stm32f769-disco _ clk: stm32f: Fix settings for LCD_CLK _ Support display on stm32f469-disco board STM32 MPU: _ stm32mp_dfu : Fix board_get_alt_info_mtd() _ stm32mp_dfu : Simplify MTD device parsing
2023-12-15cmd: clk: Make soc_clk_dump staticIgor Prusov
After introducing dump to clk_ops there is no need to override or expose this symbol anymore. Reviewed-by: Patrice Chotard <[email protected]> Tested-by: Patrice Chotard <[email protected]> Reviewed-by: Sean Anderson <[email protected]> Signed-off-by: Igor Prusov <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-15clk: Add dump operation to clk_opsIgor Prusov
This adds dump function to struct clk_ops which should replace soc_clk_dump. It allows clock drivers to provide custom dump implementation without overriding generic CCF dump function. Reviewed-by: Patrice Chotard <[email protected]> Tested-by: Patrice Chotard <[email protected]> Reviewed-by: Sean Anderson <[email protected]> Signed-off-by: Igor Prusov <[email protected]> [ Fixed parameter name in documentation ] Signed-off-by: Sean Anderson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-15Merge patch series "bootm: Handle compressed arm64 images with bootm"Tom Rini
To quote the author: This little series corrects a problem I noticed with arm64 images, where the kernel is not recognised if compression is used: U-Boot> tftp image.fit Using ethernet@7d580000 device TFTP from server 192.168.4.7; our IP address is 192.168.4.147 Filename 'image.fit'. Load address: 0x1000000 Loading: ################################################## 23 MiB 20.5 MiB/s done Bytes transferred = 24118272 (1700400 hex) U-Boot> bootm ## Loading kernel from FIT Image at 01000000 ... Using 'conf-768' configuration Trying 'kernel' kernel subimage Description: Linux Type: Kernel Image (no loading done) Compression: gzip compressed Data Start: 0x01000120 Data Size: 13662338 Bytes = 13 MiB Verifying Hash Integrity ... OK Bad Linux ARM64 Image magic! With this series: U-Boot> tftp 20000000 image.fit Using ethernet@7d580000 device TFTP from server 192.168.4.7; our IP address is 192.168.4.147 Filename 'image.fit'. Load address: 0x20000000 Loading: ################################################## 23.5 MiB 20.8 MiB/s done Bytes transferred = 24642560 (1780400 hex) U-Boot> bootm 0x20000000 ## Loading kernel from FIT Image at 20000000 ... Using 'conf-768' configuration Trying 'kernel' kernel subimage Description: Linux Type: Kernel Image (no loading done) Compression: zstd compressed Data Start: 0x20000120 Data Size: 14333475 Bytes = 13.7 MiB Verifying Hash Integrity ... OK Using kernel load address 80000 ## Loading fdt from FIT Image at 20000000 ... Using 'conf-768' configuration Trying 'fdt-768' fdt subimage Description: Raspberry Pi 4 Model B Type: Flat Device Tree Compression: zstd compressed Data Start: 0x215f820c Data Size: 9137 Bytes = 8.9 KiB Architecture: AArch64 Verifying Hash Integrity ... OK Uncompressing Flat Device Tree to 3aff3010 Booting using the fdt blob at 0x3aff3010 Working FDT set to 3aff3010 Uncompressing Kernel Image (no loading done) to 80000 Moving Image from 0x80000 to 0x200000, end=2b00000 Using Device Tree in place at 000000003aff3010, end 000000003afff4c4 Working FDT set to 3aff3010 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] The problem is that the arm64 magic is checked before the image is decompressed. However this is only part of it. The kernel_noload image type doesn't work with compression, since the kernel is not loaded. So this series deals with that by using an lmb-allocated buffer for the uncompressed kernel. Another issue is that the arm64 handling is done too early, before the image is loaded. This series moves it to after loading, so that compression can be handled. A patch is included to show the kernel load-address, so it is easy to see what is going on. One annoying feature of arm64 is that the image is often copied to another address. It might be possible for U-Boot to figure that out earlier and decompress it to the right place, but perhaps not. With all of this it should be possible to boot a compressed kernel on any of the 990 arm64 boards supported by Linux, although I have only tested two.
2023-12-15image: Correct load_bug typoSimon Glass
Correct a typo in the function comment for image_decomp(). Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-12-15board: stm32f469-disco: add splash screen with stmicroelectronics logoDario Binacchi
Display the STMicroelectronics logo with features VIDEO_LOGO and SPLASH_SCREEN on stm32f469-disco board. Signed-off-by: Dario Binacchi <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2023-12-14mtd: spinand: add support for ESMT F50x1G41LBIgor Prusov
Adaptation of Linux commit d74c36480a67 This patch adds support for ESMT F50L1G41LB and F50D1G41LB. It seems that ESMT likes to use random JEDEC ID from other vendors. Their 1G chips uses 0xc8 from GigaDevice and 2G/4G chips uses 0x2c from Micron. For this reason, the ESMT entry is named esmt_c8 with explicit JEDEC ID in variable name. Datasheets: https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F50L1G41LB(2M).pdf https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F50D1G41LB(2M).pdf Signed-off-by: Igor Prusov <[email protected]> Signed-off-by: Chuanhong Guo <[email protected]> Signed-off-by: Martin Kurbanov <[email protected]> Signed-off-by: Dmitry Rokosov <[email protected]> Tested-by: Martin Kurbanov <[email protected]> Reviewed-by: Frieder Schrempf <[email protected]> Reviewed-by: Jagan Teki <[email protected]>
2023-12-14Merge tag 'u-boot-imx-next-20231214' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next - Add TPM support for venice boards - Add networking support for imx93-evk - Enable TCP, IPv6, wget for DHCOM and Data Modul boards - Enable fastboot support for Toradex boards - Allow pico-imx7d to boot from SD - Enable fastboot for beacon imx8m beacon boards, disabled SYS_CONSOLE_IS_IN_ENV - Fix mxsboot to prevent NAND blocks being reported as bad - Add imx8mm PWM clock support - Several devicetree syncs with the kernel - Add support for i.MX8MP Polyhex Debix Model A SBC - Reworked ddr_load_train_firmware() to get a 50ms boot time improvement
2023-12-13acpi: fix struct acpi_xsdtHeinrich Schuchardt
The size of the ACPI table header is not a multiple of 8. We have to mark struct acpi_xsdt as packed to correctly access field Entry. Add a unit test for the offsets of field Entry in the RSDT and XSDT tables. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-12-13video: Add a function to clear the displaySimon Glass
Move the code from the 'cls' command into the console file, so it can be called from elsewhere. Signed-off-by: Simon Glass <[email protected]>
2023-12-13boot: Move adding initrd earlier in image_setup_libfdt()Simon Glass
This may as well happen before the general event is emitted, so move it. This will allow us to use the livetree for the event part, but the flattree for the earlier part. Signed-off-by: Simon Glass <[email protected]>
2023-12-13fdt: Improve the comment for fdt_shrink_to_minimum()Simon Glass
Add a bit more detail about what this function does. Signed-off-by: Simon Glass <[email protected]>
2023-12-13test: Add helper to skip to partial console lineSimon Glass
Sometimes we need to skip to a line but it includes addresses or other information which can vary depending on the runtime conditions. Add a new ut_assert_skip_to_linen() which is similar to the existing ut_assert_skip_to_line() function but only checks that the console line matches up to the length of the provided string. Signed-off-by: Simon Glass <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-01 15:51:17 +0000