| Age | Commit message (Collapse) | Author |
|---|
|
GPIO keyboard is used on many newly upstreamed devices.
Tested-by: Andreas Westman Dorcsak <[email protected]> # ASUS Grouper E1565
Tested-by: Svyatoslav Ryhel <[email protected]> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
We can use them in secure pwrc driver.
Signed-off-by: Alexey Romanov <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Add support for Amlogic A1 SoC family.
Signed-off-by: Igor Prusov <[email protected]>
Signed-off-by: Evgeny Bachinin <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Import Linux 6.3-rc7 Device tree and necessary bindings for Amlogic A1
board from 6a8f57ae2eb0 ("Linux 6.3-rc7").
Signed-off-by: Igor Prusov <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
The current mechanism is unnecessarily complex. Simplify the whole mechanism
such that the entire fitImage is signed, IVT is placed at the end, followed
by CSF, and this entire bundle is also authenticated. This makes the signing
scripting far simpler.
Signed-off-by: Marek Vasut <[email protected]>
|
|
This function is not used by anyone.
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add test for command bdinfo .
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
At first SPI transfers, multiple chip selects can be
enabled simultaneously. This is due to chip select
polarity, which is not properly initialized for all
channels. This patch fixes the issue.
Signed-off-by: Julien Panis <[email protected]>
|
|
Add a generic API to support loading of SPL payload from any supported
filesystem on a given partition of a block device.
Signed-off-by: Mayuresh Chitale <[email protected]>
|
|
Use proper project name in DTs, messages and READMEs.
Signed-off-by: Michal Simek <[email protected]>
|
|
Move header to include to allow external code
to get the internal bdev structures to access
block device operations.
as at it, just add the UCLASS_NVMXIP string
so we get the correct output in partitions
listing.
Signed-off-by: Rui Miguel Silva <[email protected]>
|
|
The fwu metadata in the metadata partitions
should/are packed to guarantee that the info is
correct in all platforms. Also the size of them
are used to calculate the crc32 and that is important
to get it right.
Signed-off-by: Rui Miguel Silva <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Commit 8fc78fc73b7f9d ("configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs")
made the comment useless.
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
|
|
Device tree alignment with Linux kernel v6.3:
- f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi
- 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on
stm32mp135f-dk.dts
- 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi
- 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in
stm32mp135f-dk
- ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin
in stm32mp15-pinctrl.dtsi
- a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio
- 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT
property
- ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13
- 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk
- ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on
stm32mp135f-dk
- e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk
- 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131
- 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support
on stm32mp131
- 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on
stm32mp131
- 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131
- 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on
stm32mp135f-dk
- 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
- c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk
- 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
- 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on
stm32mp135f-dk
- e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13
- 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on
stm32mp135f-dk
- 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for
stm32mp15xx-dhcor-som
- 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for
stm32mp15xx-dhcom-som
- 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for
stm32mp151a-prtt1l
- 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on
stm32mp15xx-dkx
- f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx
- dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property
- ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131
- 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131
- c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131
- 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131
- bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131
- a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk
- a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk
- a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk
- 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros
- 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on
stm32mp131
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Add a new dt-bindings/media/video-interfaces.h header that defines
macros corresponding to the bus types from media/video-interfaces.yaml.
This allows avoiding hardcoded constants in device tree sources.
Based on linux commit f7eeb0084593 ("media: dt-bindings: media: Add macros
for video interface bus types")
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Remove the support of the fastboot "oem format" command for STM32MP15x
boards and removed the associated env variable "partitions".
This command is not required; with fastboot tool, the GPT partition can
be handle with "flash" command in "gpt" target (=CONFIG_FASTBOOT_GPT_NAME),
for example: fastboot flash gpt gpt.bin
This patch avoids to define the GPT partitioning in U-Boot environment,
which is incompatible with planned modifications, for example to
support TF-A firmware update.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Add a new function fdt_copy_fixed_partitions to copy the fixed
partition nodes from U-Boot device tree to Linux kernel
device tree and to dynamically configure the MTD partitions.
This function fdt_copy_fixed_partitions is only based on device tree
with livetree compatible function and replace the function
fdt_fixup_mtdparts based on mtdparts variable.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
This patch targets the last remaining commands left to sync to their
latest form - mainly the mc_get_version() API.
Besides this, remove any macro which is now of no help.
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Sync the Data Path IO APIs to their latest form, this means the layout
of each command is created based on structures which clearly describe
the endianness of each field rather than some macros.
The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Sync the Data Path Soft Parser APIs to their latest form, this
means the layout of each command is created based on structures which
clearly describe the endianness of each field rather than some macros.
The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Sync the Data Path Network Interface APIs to their latest form, this
means the layout of each command is created based on structures which
clearly describe the endianness of each field rather than some macros.
The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Sync the Data Resource Container APIs to their latest form, this means
the layout of each command is created based on structures which clearly
describe the endianness of each field rather than some macros.
The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Sync the Data Path MAC APIs to their latest form, this means the
layout of each command is created based on structures which clearly
describe the endianness of each field rather than some macros.
The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Sync the Data Path Buffer Pool APIs to their latest form, this means the
layout of each command is created based on structures which clearly
describe the endianness of each field rather than some macros.
The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
There are multiple MC APIs which were added years ago but they are not
used at all in the u-boot source code. Remove all these APIs.
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Since the new RevC LX2160A-RDB board has its 10G Aquantia PHYs at
different MDIO bus addresses, we must update both the kernel DTS and
u-boot's DTS (in case of DM_ETH) in case the board is indeed RevC or
newer. Use the newly introduced get_board_rev() function to trigger a
fixup of the kernel DTS to properly match the actual PHY addresses.
All this is encapsulated in the fdt_fixup_board_phy_revc() function
which will be used in the next patch.
Use the newly fdt_fixup_board_phy_revc() function introduced to
update both kernel's DTS and u-boot's DTS.
Signed-off-by: Florin Chiculita <[email protected]>
Signed-off-by: Ioana Ciornei <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Add a new option to the 'net' command which can be used to dump network
statistics.
To do this, 3 new callbacks are added to the eth_ops structure:
.get_sset_count(), .get_strings(), .get_stats(). These callbacks
have the same functions as in Linux: to return the number of counters,
the strings which describe those counters and the actual values.
Signed-off-by: Ioana Ciornei <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
The ldpaa_eth driver already had a DPMAC statistics dump, this patch
extends the list of stats and adds a bit more structure to the code.
For a bit more context, the DPAA2 u-boot software architecture uses a
default network interface object - a DPNI - which, at runtime, will get
connected to the currently used DPMAC object.
Each time the .stop() eth callback is called, the DPMAC is destroyed
thus any previous counters will get lost.
As a preparation for the next patches, we add a software kept set of
DPMAC counters which will get updated before each destroy operation
takes place.
Signed-off-by: Ioana Ciornei <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
In order to simplify code, dpni_statistics can be written as a union.
Using the raw accessors we can just loop through all the statistics from
a page without trying to access each an every one independently.
Make this change to a union.
Signed-off-by: Ioana Ciornei <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Each MC commands has a specific predefined memory layout that gets
interpreted by the firmware. The dpmac_get_counters() API memory layout
is wrong, thus the results returned by the command are incorrect.
Fix this by updating the offset of the counter field.
Signed-off-by: Ioana Ciornei <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next
Xilinx changes for v2023.10-rc1
global:
- Use proper U-Boot project name
Fix sparse warnings in zynqmp-clk, zynqmp handoff, board
cmd:
- Cover incorrect 0 length entries
Versal NET:
- Add bootmode logic
- Support SPP production version
- Add loadpdi command
ZynqMP:
- Clear pmufw node command ID handling
- Change power domain behavior around zynqmp_pmufw_node()
- Fix zynqmp cmd return values and pmufw command
- Fix R5 tcm init and modes
mmc:
- Sync Versal NET emmc DT binding
pcie:
- Add support for ZynqMP PCIe root port
video:
- Add support for ZynqMP DP
tools:
- Fix debug message in relocate-rela
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Add the vidconsole flags for video serial console.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/f1b58d1d1052bf2d8cb8b25af44ecbb567ebbd4a.1684312924.git.michal.simek@amd.com
|
|
Add support for RGBA8888 32bpp format where pixels are picked in
32-bit integers, where the colors are stored in memory such that
R is at lowest address, G after that, B after that, and A last.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/aa1de54b7d4ff46df6858f76d52634e0c5c71a4a.1684312924.git.michal.simek@amd.com
|
|
Use proper project name in comments, Kconfig, readmes.
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
|
|
The phy_connect_dev() is legacy API, now that there are no users,
make it internal to phy.c and unpublish it from headers.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
|
|
Add code to support FWU_MULTI_BANK_UPDATE.
The platform does not have gpt-partition storage for
Banks and MetaData, rather it used SPI-NOR backed
mtd regions for the purpose.
Signed-off-by: Jassi Brar <[email protected]>
|
|
In the FWU Multi Bank Update feature, the information about the
updatable images is stored as part of the metadata, on a separate
region. Add a driver for reading from and writing to the metadata
when the updatable images and the metadata are stored on a raw
MTD region.
The code is divided into core under drivers/fwu-mdata/ and some helper
functions clubbed together under lib/fwu_updates/
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
fwu_get_mdata() sounds more appropriate than fwu_get_verified_mdata()
Signed-off-by: Jassi Brar <[email protected]>
Reviewed-by: Etienne Carriere <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Tested-by: Sughosh Ganu <[email protected]>
|
|
The common code can now read, verify and fix meta-data copies
while exposing one consistent structure to users.
Only the .read_mdata() and .write_mdata() callbacks of fwu_mdata_ops
are needed. Get rid of .get_mdata() .update_mdata() .get_mdata_part_num()
.read_mdata_partition() and .write_mdata_partition() and also the
corresponding wrapper functions.
Signed-off-by: Jassi Brar <[email protected]>
Reviewed-by: Etienne Carriere <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Tested-by: Sughosh Ganu <[email protected]>
|
|
Instead of each i/f having to implement their own meta-data verification
and storage, move the logic in common code. This simplifies the i/f code
much simpler and compact.
Signed-off-by: Jassi Brar <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Tested-by: Sughosh Ganu <[email protected]>
|
|
Add board code for the R8A77980 V3HSK board.
Add CPLD sysreset driver to the R-Car V3H SK board.
Extracted from a larger patch by Valentine Barshak.
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Valentine Barshak <[email protected]>
Signed-off-by: Hai Pham <[email protected]>
Signed-off-by: Tam Nguyen <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
[Marek: Sync configs and board code with V3H Condor, squash CPLD driver in]
|
|
The eagle.h is now empty and only includes rcar-gen3-common.h .
Use rcar-gen3-common.h directly instead and drop eagle.h .
No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The number of image array entries global variable is required
to support EFI capsule update. This information is exposed as a
num_image_type_guids variable, but this information
should be included in the efi_capsule_update_info structure.
This commit adds the num_images member in the
efi_capsule_update_info structure. All board files supporting
EFI capsule update are updated.
Signed-off-by: Masahisa Kojima <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
The ubifsload command is truncating any address above 4GiB as it casts
this address to an u32, instead of using an unsigned long which most of
the other load commands do. Change this to an unsigned long to allow
loading into high memory for boards which use these areas.
Fixes the following error:
=> ubifsload 0x2100000000 /boot/Image.lzma
Loading file '/boot/Image.lzma' to addr 0x00000000...
Unhandled exception: Store/AMO access fault
Signed-off-by: Ben Dooks <[email protected]>
Signed-off-by: Ben Dooks <[email protected]>
|
|
At present two acpi files are built every time since they use a version
number from version.h
This is not necessary. Make use of the same technique as for the version
string, so that they are build only when they change.
Signed-off-by: Simon Glass <[email protected]>
|
|
The get_unaligned()/put_unaligned() implementations are more
complex than necessary.
Move everything into one file and use a more compact implementation based
on packed struct access and byte swapping macros.
This patch is based on the Linux kernel commit 803f4e1eab7a
("asm-generic: simplify asm/unaligned.h") by Arnd Bergmann.
Signed-off-by: Jens Wiklander <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
linux/unaligned/access_ok.h is unused, so remove it.
Signed-off-by: Jens Wiklander <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
As part of various code clean-ups we have on occasion missed removing
unused header files. None of these files are referenced anywhere else
at this point.
Signed-off-by: Tom Rini <[email protected]>
|
|
Commit 11232139e399 ("nds32: Remove the architecture") removed the nds32
architecture, and with it the last user of the Faraday AHB controller
header file.
Consequently remove that header file as well.
This was found because the inclusion guard was misspelled.
Signed-off-by: Andre Przywara <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
