summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-05-29rk3399: Enable NVMe distro bootcmdMark Kettenis
Include NVME in the list of boot targets if CONFIG_NVME is enabled. Signed-off-by: Mark Kettenis <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2020-05-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Fix SPI boot on ds414 (Ezra) - Fix PHY mode definition on armada-3720-uDPU (Jakov) - Convert CRS305-1G-4S to generic version (Luka)
2020-05-27cbfs: Don't require the CBFS size with cbfs_init_mem()Simon Glass
The size is not actually used since it is present in the header. Drop this parameter. Also tidy up error handling while we are here. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2020-05-27cbfs: Allow reading a file from a CBFS given its base addrSimon Glass
Currently we support reading a file from CBFS given the address of the end of the ROM. Sometimes we only know the start of the CBFS. Add a function to find a file given that. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2020-05-27cbfs: Change file_cbfs_find_uncached() to return an errorSimon Glass
This function currently returns a node pointer so there is no way to know the error code. Also it uses data in BSS which seems unnecessary since the caller might prefer to use a local variable. Update the function and split its body out into a separate function so we can use it later. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2020-05-27cbfs: Return the error code from file_cbfs_init()Simon Glass
We may as well return the error code and use it directly in the command code. CBFS still uses its own error enum which we may be able to remove, but leave it for now. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2020-05-27cbfs: Use ulong consistentlySimon Glass
U-Boot uses ulong for addresses but there are a few places in this driver that don't use it. Convert this driver over to follow this convention fully. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2020-05-27cbfs: drop file_cbfs_result declarationChristian Gmeiner
It is not definded anywhere. Signed-off-by: Christian Gmeiner <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2020-05-27arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236Luka Kovacic
Convert the CRS305-1G-4S board to CRS3xx-98DX3236 to enable easier implementation of new CRS3xx series boards, based on Marvell Prestera 98DX3236. Signed-off-by: Luka Kovacic <[email protected]> Reviewed-by: Stefan Roese <[email protected]> Cc: Luka Perkov <[email protected]> Cc: Jakov Petrina <[email protected]>
2020-05-27arm: mvebu: ds414: define CONFIG_SYS_U_BOOT_OFFSEzra Buehler
Without CONFIG_SYS_U_BOOT_OFFS set to CONFIG_SYS_SPI_U_BOOT_OFFS, U-Boot will be located at address 0x16000. But, SPL will try to load the payload from 0x24000 causing the boot to hang. Signed-off-by: Ezra Buehler <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-05-25sandbox: move compression option to KconfigMichael Walle
CONFIG_BZIP2 and CONFIG_GZIP_COMPRESSED are Kconfig options. Select them by CONFIG_SANDBOX instead of setting them in configs/sandbox.h. Signed-off-by: Michael Walle <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-05-25Convert CONFIG_CMD_MMC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CMD_MMC Signed-off-by: Tom Rini <[email protected]>
2020-05-25doc: dfu: describe more DFU functionHeinrich Schuchardt
Add some of the missing DFU function descriptions. Signed-off-by: Heinrich Schuchardt <[email protected]> Acked-by: Lukasz Majewski <[email protected]>
2020-05-25doc: dfu: add DFU to HTML documentationHeinrich Schuchardt
Add the device firmware update functions to the generated HTML documentation. Signed-off-by: Heinrich Schuchardt <[email protected]> Acked-by: Lukasz Majewski <[email protected]>
2020-05-22Merge branch 'net' of git://git.denx.de/u-boot-socfpgaTom Rini
- ks8851 cleanups and DM migration
2020-05-22net: ks8851: Add Kconfig entriesMarek Vasut
Convert CONFIG_KS8851_MLL and CONFIG_KS8851_MLL_BASEADDR to Kconfig Signed-off-by: Marek Vasut <[email protected]> Cc: Eugen Hristev <[email protected]> Cc: Joe Hershberger <[email protected]>
2020-05-22Merge tag 'u-boot-rockchip-20200522' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3288 chromebook veyron support; - Add pcie driver support for rk3399; - other fixes for rk3399 boards
2020-05-22Merge tag 'efi-2020-07-rc3-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc3 (2) Problems fixed with these patches are: * UEFI sub-system not working with virtio block devices * Missing SATA support in UEFI sub-system * A superfluous debug statement
2020-05-22rockpro64: Enable HDMI output on rockpro64 boardAndrius Štikonas
Reference to commit that adds HDMI to other rk3399 boards: commit 9778edae5576 ("rockchip: Enable HDMI output on rk3399 board w/ HDMI") Signed-off-by: Andrius Štikonas <[email protected]> Cc: Manivannan Sadhasivam <[email protected]> Cc: Jagan Teki <[email protected]> Cc: Kever Yang <[email protected]> Tested-by: Mark Kettenis <[email protected]> Reviewed-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2020-05-21Merge git://git.denx.de/u-boot-shTom Rini
- Enable -ffunction-sections / -fdata-sections --gc-sections to SH - RCar Gen3 updates
2020-05-21efi_loader: device path for SATA devicesHeinrich Schuchardt
Provide device path nodes for SATA devices. This avoids creation of two handles with the same device path indicating our root node. This is what the device paths for a SATA drive with four partitions could like: /VenHw(..)/Sata(0x0,0xffff,0x0) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(1,MBR,0x81ea591f,0x800,0x63ff830) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(2,MBR,0x81ea591f,0x6400800,0x9ff830) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(3,MBR,0x81ea591f,0x6e00800,0x16ef2ab0) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(4,MBR,0x81ea591f,0x1dcf3800,0x1dcedab0) Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-05-21efi_loader: device path for virtio block devicesHeinrich Schuchardt
The UEFI specification does not define a device sub-type for virtio. Let's use a vendor hardware node here. This avoids creation of two handles with the same device path indicating our root node. Reported-by: Ard Biesheuvel <[email protected]> Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-05-21efi_loader: add EFI_MEMORY_SP to memory attributesHeinrich Schuchardt
The UEFI 2.8 specification has introduced the EFI_MEMORY_SP memory attribute. Add it to the 'efidebug memmap' and 'efi mem' commands. Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-05-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
2020-05-20fdtdec: Add weak function to patch U-Boot DT right after fdtdec_setup()Marek Vasut
Add weak function which is called right after fdtdec_setup() configured the U-Boot DT. This permits board-specific adjustments to the U-Boot DT before U-Boot starts parsing the DT. This could be used e.g. to patch in various custom nodes or merge in DT fragments from prior-stage firmware. Signed-off-by: Marek Vasut <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]> Cc: Simon Glass <[email protected]> Cc: Tom Rini <[email protected]>
2020-05-19mpc83xx, abb: remove suvd3 boardHeiko Schocher
the mpc83xxx suvd3 variant is not longer used, so remove it. Signed-off-by: Holger Brunck <[email protected]> Signed-off-by: Heiko Schocher <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-05-19mpc83xx: remove redundant MPC83xx_RESET #defineRasmus Villemoes
This macro is only used (tested for existence) in mpc83xx.c, which unconditionally includes mpc83xx.h where it is unconditionally defined. Removing it makes the remaining code easier to read. Signed-off-by: Rasmus Villemoes <[email protected]>
2020-05-19include/configs: ls1046afrwy: add support for boot targets.Pramod Kumar
ls1046afrwy does not support sata boot. So Override default BOOT_TARGET_DEVICES and support only mmc, usb and dhcp as boot targets. Signed-off-by: Pramod Kumar <[email protected]> [Rebased] Signed-off-by: Priyanka Jain <[email protected]>
2020-05-19configs: ls1012a: Increase CONFIG_SYS_MALLOC_LEN sizeKuldeep Singh
CONFIG_SYS_MALLOC_LEN is currently set to low value and leaves very less space to do malloc in flash environmet. Increase the value to get more memory and also make it align with other boards(ls1046a, ls1043a etc.) config values. Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-05-19configs: ls2080ardb: Make BOOT command access flash memory as per spi-memKuldeep Singh
BOOT command currently access spi-nor flash memory directly. As per spi-mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it. Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-05-19configs: ls2080ardb: Make MC_INIT access flash memory as per spi-memKuldeep Singh
MC_INIT command currently access spi-nor flash memory directly. As per spi-mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it. Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-05-19configs: ls1046a: Move SPI_FLASH_SPANSION to defconfigKuldeep Singh
Enable CONFIG_SPI_FLASH_SPANSION in defconfigs of LS1046ARDB and LS1046AQDS which have two spansion flases i.e s25fs512s each of size 64M. Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-05-19configs: ls1012a: Enable CONFIG_SPI_FLASH_SPANSION in defconfigsKuldeep Singh
Since CONFIG_FSL_QSPI is already enabled for LS1012A in defconfigs. Also enable CONFIG_SPI_FLASH_SPANSION for LS1012A boards having spansion flashes. Signed-off-by: Ashish Kumar <[email protected]> Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-05-19configs: ls1043a: Move CONFIG_FSL_QSPI and SPI_FLASH_SPANSION to defconfigKuldeep Singh
Move CONFIG_FSL_QSPI to the board defconfigs and while at it also move CONFIG_SPI_FLASH_SPANSION for LS1043AQDS. Signed-off-by: Frieder Schrempf <[email protected]> Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-05-19treewide: Remove unused FSL QSPI config options for Layerscape platformsKuldeep Singh
Some of these options are not used by the driver anymore and some of them are obsolete as the information is gathered from the dt. Also consolidating defines in common headers. Signed-off-by: Frieder Schrempf <[email protected]> Signed-off-by: Ashish Kumar <[email protected]> Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18Use __ASSEMBLY__ as the assembly macrosSimon Glass
Some places use __ASSEMBLER__ instead which does not work since the Makefile does not define it. Fix them. Signed-off-by: Simon Glass <[email protected]>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18common: Drop linux/stringify.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18common: Drop linux/bug.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18common: Drop asm_offsets.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18common: Drop asm/ptrace.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <[email protected]>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18common: Drop image.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18common: Drop bootstage.h from common headerSimon Glass
Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18bootstage: Use BOOTSTAGE instead of BOOTSTATESimon Glass
Some of the enum members are wrong. Fix them. Signed-off-by: Simon Glass <[email protected]>
2020-05-18common: Drop part.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-18part: Drop disk_partition_t typedefSimon Glass
We should not be using typedefs and these make it harder to use forward declarations (to reduce header file inclusions). Drop the typedef. Signed-off-by: Simon Glass <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-06-22 23:03:36 +0000