summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-01-07imx: Add support for i.MX28 based XEA boardLukasz Majewski
This patch introduces support for i.MX28 based XEA board. This board supports DM/DTS in U-Boot proper as well as DM aware drivers in SPL (u-boot.sb) by using OF_PLATDATA. More detailed information regarding usage of it can be found in ./board/liebherr/xea/README file. U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) Trying to boot from MMC1 MMC0: Command 8 timeout (status 0xf0344020) mmc_load_image_raw_sector: mmc block read error U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SPI #3, master, 3V3 NOR Model: Liebherr (LWE) XEA i.MX28 Board DRAM: 128 MiB MMC: MXS MMC: 0 Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB OK In: serial Out: serial Err: serial Net: Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2 eth0: ethernet@800f0000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <[email protected]>
2020-01-07imx6: aristainetos: add support for rev C boardHeiko Schocher
add support for revision C boards. This board has no longer a NAND. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: add aristainetos 2b cslHeiko Schocher
add aristainetso board version CSL. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: readd aristainetos 2b boardHeiko Schocher
readd aristainetos 2b board. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: enable HAB bootHeiko Schocher
enable IMX_HAB on aristianetos board Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: cleanup default EnvironmentHeiko Schocher
sync defaut Envoronment with customer changes. Unfortunately they are not changeable, as already board is in production mode. Get rid of the big bootcommand and set bootcommand through Kconfig option. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: add DM_I2C supportHeiko Schocher
enable DM_I2C in defconfig and remove i2c specific board code. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: add DM_VIDEO supportHeiko Schocher
add DM_VIDEO support and remove now unneeded board code. As we show a bmp logo on boot, call now bmp_display() from board code and do not use cfb_console anymore. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: convert CONFIG_DM_SPIHeiko Schocher
enable CONFIG_DM_SPI and CONFIG_DM_SPI_FLASH and get rid of build removal warnings. define CONFIG_GPIO_ENABLE_SPI_FLASH is not longer needed, so remove it from config_whitelist.txt Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: convert to DM_USBHeiko Schocher
Drop CONFIG_USB_MAX_CONTROLLER_COUNT and enable DM_USB in defconfig. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: convert to DM_MMCHeiko Schocher
Enable DM_MMC support. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: remove aristainetos-v2.cHeiko Schocher
remove aristainetos-v2.c file, as we now want to switch to DM/DTS support and have all board specific code in one file. Goal is to setup differences through DT. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: disable gigabit supportHeiko Schocher
gigabit support does not work on the aristainetos board, so disable it. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: remove 2b versionHeiko Schocher
remove 2b version of aristainetos board, as it is easier to make the DM / DTS port and introduce the 2b board version again (also some more board version). Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: aristainetos: move defines to KconfigHeiko Schocher
move defines, which are already moved to Kconfig out of board config. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07video: lg4573: convert to DMHeiko Schocher
convert this driver to support DM. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-07imx6: remove aristainetos boardHeiko Schocher
remove not anymore used aristainetos board. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-06Merge branch 'next'Tom Rini
Bring in the following merges: commit 8fbbec12f7d2c18f8883f3371cfca74a98b5dd87 Merge: 87f69f467a83 63618e71e89b Author: Tom Rini <[email protected]> Date: Fri Jan 3 09:48:47 2020 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support commit 87f69f467a8335b171c71bf217d2625d515acd7c Merge: c0912f9bbfb2 4466b9970319 Author: Tom Rini <[email protected]> Date: Tue Dec 24 08:18:19 2019 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next - Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards commit c0912f9bbfb26dd03d189953678691b799d35b6e Merge: 533c9f5714bd a1d6dc3f8407 Author: Tom Rini <[email protected]> Date: Wed Dec 18 07:20:19 2019 -0500 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral commit 533c9f5714bdba79dc6f2629284d4c1a08a611d1 Merge: 553cb0688782 033e18b47bd0 Author: Tom Rini <[email protected]> Date: Tue Dec 17 07:53:08 2019 -0500 Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it. commit 553cb06887825314e74a9bdac337467c77d1db88 Merge: f39abbbc531e b4f98b3b16ec Author: Tom Rini <[email protected]> Date: Thu Dec 12 08:18:59 2019 -0500 Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next buildman improvements including toolchain environment feature sandbox unicode support in serial
2020-01-03include/u-boot/crc.h: pull 'uint' definition on musl targetsSergei Trofimovich
The build failure was originally reported on arm64-musl target at https://bugs.gentoo.org/703132. Here is the amd64-musl variant: ``` $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc) $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all -j$(nproc) ... include/u-boot/crc.h:37:44: error: unknown type name 'uint'; did you mean 'int'? 37 | void crc16_ccitt_wd_buf(const uint8_t *in, uint len, | ^~~~ | int ``` Note: 'uint' is not defined there. On glibc 'uint' comes from <sys/types.h> and happens to work on most .c files. The change imports 'uint' declaration from '<compiler.h>'. Bug: https://bugs.gentoo.org/703132 Signed-off-by: Sergei Trofimovich <[email protected]>
2020-01-03include: fix 'ulong' definition on musl targetsSergei Trofimovich
The build failure was originally reported on arm64-musl target at https://bugs.gentoo.org/703132. Here is the amd64-musl variant: ``` $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc) $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all -j$(nproc) ... In file included from tools/env/../../env/flags.c:7, from tools/env/env_flags.c:1: include/env.h:159:1: error: unknown type name 'ulong'; did you mean 'long'? 159 | ulong env_get_ulong(const char *name, int base, ulong default_val); | ^~~~~ | long ``` Note: 'ulong' is not defined there. On glibc 'ulong' comes from <sys/types.h>: ```c /* Old compatibility names for C types. */ typedef unsigned long int ulong; ``` On musl it comes from <sys/types.h> as well but from under different guards: ```c typedef unsigned long u_long, ulong; ``` The change inlines 'ulong' define similar to 'uint' define. Bug: https://bugs.gentoo.org/703132 Signed-off-by: Sergei Trofimovich <[email protected]>
2020-01-02Merge tag 'u-boot-rockchip-20191231' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix latest mainline kernel for rk3308 - Update rk3288-evb config to suport OP-TEE - Fix for firefly-px30 DEBUG_UART channel and make it standalone - Script make_fit_atf add python3 support - Fix rk3328 timer with correct COUNTER_FREQUENCY - Fix rk3328 ATF support with enable spl-fifo-mode
2019-12-31rockchip: rk3328: add COUNTER_FREQUENCY definitionKever Yang
The arch timer needs COUNTER_FREQUENCY to get correct counter, add it to make the timer works correct. Signed-off-by: Kever Yang <[email protected]>
2019-12-28Merge tag 'u-boot-imx-20191228' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.01 ----------------- - Fixes for Nitrogen6x - Fix corruption for mx51evk - colibri i.MX6: fix broken ESDHC conversion - mx6sxsabresd: fix broken mmcdev - imx6q_logic: cleanup boot sequence - update ATF for imx8mq_evk - pfuze: fix pmic_get() Travis CI: https://travis-ci.org/sbabic/u-boot-imx/builds/630007464
2019-12-27omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HWPatrik Dahlström
The omap3_beagle NAND ECC scheme was changed in 4b37928d357 for unknown reasons, leading to uncorrectible ecc errors. This commit changes it back to what it was before. Signed-off-by: Patrik Dahlström <[email protected]>
2019-12-27imx8m_evk: Remove unneeded earlycon stringFabio Estevam
Passing earlycon string in the command line may be useful during bring up, but not after such phase. Remove the earlycon string to align with the other i.MX SoCs command lines. Signed-off-by: Fabio Estevam <[email protected]>
2019-12-27mx51evk: Fix U-Boot corruption after saving the environmentFabio Estevam
U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables. Running "saveenv" followed by a "reset" causes U-Boot to hang because of this overlap. Fix this problem by increasing the CONFIG_ENV_OFFSET size. Also, in order to prevent this same problem to happen in the future, use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time. CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare CONFIG_ENV_OFFSET with its direct value instead. Signed-off-by: Fabio Estevam <[email protected]>
2019-12-27mx6sxsabresd: Adjust the mmcdev after DM conversionFabio Estevam
After the DM conversion the boot SD card is now device 3. Adjust it so that we can boot the kernel again. While at it avoid a hardcoded mmc dev inside the finduuid script. Signed-off-by: Fabio Estevam <[email protected]>
2019-12-27rockchip: rk3308: allow loading larger kernel ImageAndy Yan
When compile the curren mainline linux kernel(Linux 5.5-rc3) with defconfig, the final Image is 29M, it's much larger than Linux 5.4. On the current u-boot side on rk3308, the gap between kernel and fdt is 25M, the fdt will overwrite kernel Image, so move ftd to a higher memory to give 34M gab for them. Signed-off-by: Andy Yan <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2019-12-26armv8: ls1028ardb: enable DisplayPort Power supportWen He
Enable DP_PWR signal to power the DP to HDMI converter cable. Signed-off-by: Wen He <[email protected]> Signed-off-by: Priyanka Jain <[email protected]>
2019-12-26armv8: fsl-layerscape: Increase mmc read size for secure-boot headersUdit Agarwal
Maximum size of secure boot header to be read from MMC is 12KB which spans across 0x20 blocks. Hence increase the mmc read size for secure boot headers from MMC to 0x20 blocks. Signed-off-by: Udit Agarwal <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2019-12-26drivers/fsl-mc: Support DPSPARSER object and apply spb commandFlorinel Iordache
Add support for DPSPARSER object (create/destroy, open/close, apply spb) which is required to configure Soft Parser by using MC. Also add uboot command to apply Soft Parser Blob with command: fsl_mc apply spb <spb_load_addr> Signed-off-by: Florinel Iordache <[email protected]> Signed-off-by: Priyanka Jain <[email protected]>
2019-12-23ppc/kmeter1: remove unused defineHolger Brunck
CONFIG_CONS_INDEX is nowhere used for this board, we can drop it. Signed-off-by: Holger Brunck <[email protected]> Reviewed-by: Priyanka Jain <[email protected]> CC: Priyanka Jain <[email protected]> CC: Valentin Longchamp <[email protected]>
2019-12-23board/km: remove CONFIG_KM_BOARD_NAMEHolger Brunck
We can use the existing CONFIG_SYS_CONFIG_NAME define for that and remove the option. Also fix the boot string for all km83xx boards. Signed-off-by: Holger Brunck <[email protected]> Reviewed-by: Priyanka Jain <[email protected]> CC: Priyanka Jain <[email protected]> CC: Valentin Longchamp <[email protected]>
2019-12-23ppc/km: convert KM_DEF_NETDEV to KconfigHolger Brunck
Remove this from the board header files and move it to Kconfig. Also use the correct default address for kmtegr1. Signed-off-by: Holger Brunck <[email protected]> Reviewed-by: Priyanka Jain <[email protected]> CC: Priyanka Jain <[email protected]> CC: Valentin Longchamp <[email protected]>
2019-12-23ppc/km/tegr1: support second localbus clock signalHolger Brunck
On kmtegr1 we have to specify the second localbus clock signal also instead of using the default for our ppc 8309 boards. Signed-off-by: Holger Brunck <[email protected]> Reviewed-by: Priyanka Jain <[email protected]> CC: Priyanka Jain <[email protected]> CC: Valentin Longchamp <[email protected]>
2019-12-18Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 ↵Tom Rini
into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral
2019-12-17mtd: spi: spi-nor-core: Add SST vendor specific SFDP parserTudor Ambarus
JESD216 allow vendors to define their own SFDP tables. Add SST SFDP parser. The vendor table is allocated using resource-managed kmalloc - the table will be freed on driver detach. It will be accessible by getting the UCLASS_SPI_FLASH's private data. The SST's SFDP table is particularly of interest because contains pre-programmed globally unique EUI-48 and EUI-64 identifiers. Signed-off-by: Tudor Ambarus <[email protected]> Reviewed-by: Vignesh Raghavendra <[email protected]>
2019-12-17misc: i2c_eeprom: add size queryRobert Beckett
Add ability to query size of eeprom device and partitions Signed-off-by: Robert Beckett <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2019-12-17i2c: add support for offset overflow in to addressRobert Beckett
Some devices (2 wire eeproms for example) use some bits from the chip address to represent the high bits of the offset instead of or as well as using multiple bytes for the offset, effectively stealing chip addresses on the bus. Add a chip offset mask that can be set for any i2c chip which gets filled with the offset overflow during offset setup. Signed-off-by: Robert Beckett <[email protected]> Signed-off-by: Ian Ray <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2019-12-15x86: Add chromebook_coralSimon Glass
Add support for coral which is a range of Apollo Lake-based Chromebook released in 2017. This also includes reef released in 2016, since it is based on the same SoC. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-12-15spl: Add methods to find the position/size of next phaseSimon Glass
Binman supports writing the position and size of U-Boot proper and SPL into the previous phase of U-Boot. This allows the next phase to be easily located and loaded. Add functions to return these useful values, along with symbols to allow TPL to load SPL. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-12-15x86: Move qemu CPU fixup function into its own fileSimon Glass
This function is specific to qemu so it seems best to keep it separate from the generic code. Move it out to a new file and update the condition to use if() instead of #ifdef Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-12-15mtd: spi: Export spi_flash_std_probe()Simon Glass
With of-platdata we need to create drivers for particular chips, or at least drivers that are separate from the standard code, since C structures are created by dtoc which are private to that driver. To avoid duplicating the probing code, export this probe function for use by these drivers. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-12-15spi: Correct operations check in dm_spi_xfer()Simon Glass
At present we have to have an xfer() method even if it does nothing. This is not correct, so fix it. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-12-15x86: fsp: Add a new arch_fsp_init_r() hookSimon Glass
With FSP2 we need to run silicon init early after relocation. Add a new hook for this. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-12-15x86: fsp: Add FSP2 base supportSimon Glass
Add support for some important configuration options and FSP memory init. The memory init uses swizzle tables from the device tree. Support for the FSP_S binary is also included. Bootstage timing is used for both FSP_M and FSP_S and memory-mapped SPI reads. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-12-15x86: Move UCLASS_IRQ into a separate fileSimon Glass
Update this uclass to support the needs of the Apollo Lake ITSS. It supports four operations. Move the uclass into a separate directory so that sandbox can use it too. Add a new Kconfig to control it and enable this on x86. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-12-15pci: Add support for p2sb uclassSimon Glass
The Primary-to-Sideband bus (P2SB) is used to access various peripherals through memory-mapped I/O in a large chunk of PCI space. The space is segmented into different channels and peripherals are accessed by device-specific means within those channels. Devices should be added in the device tree as subnodes of the p2sb. This adds a uclass and enables it for sandbox. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-12-15x86: power: Add an ACPI PMC uclassSimon Glass
Intel x86 SoCs have a power manager/controller which handles several power-related aspects of the platform. Add a uclass for this, with a few useful operations. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-12-15dm: pci: Move pci_get_devfn() into a common fileSimon Glass
Early in boot it is necessary to decode the PCI device/function values for particular peripherals in the device tree or of-platdata. This is needed in TPL where CONFIG_PCI is not defined. To handle this, move pci_get_devfn() into a file that is built even when CONFIG_PCI is not defined. Also add a function for use by of-platdata, to convert a reg property to a pci_dev_t. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-06-24 13:42:50 +0000