summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-11-04Merge branch '2019-11-04-ti-imports'Tom Rini
- Various CPSW related improvements, DTS resync
2019-11-04net: ti: cpsw: convert to use dev/ofnode apiGrygorii Strashko
Conver TI CPSW driver to use dev/ofnode api. Signed-off-by: Grygorii Strashko <[email protected]> [trini: Add <dm/ofnode.h> to provide the prototype to ofnode] Signed-off-by: Tom Rini <[email protected]>
2019-11-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Add support for Intel FSP-S and FSP-T in binman - Correct priority selection for image loaders for SPL - Add a size check for TPL - Various small SPL/TPL bug fixes and changes - SPI: Add support for memory-mapped flash
2019-11-03nand: mxs_nand: add API for switching different BCH layoutsIgor Opaniuk
On i.MX7 in a sake of reducing the disturbances caused by a neighboring cells in the FCB page in the NAND chip, a randomizer is enabled when reading the FCB page by ROM bootloader. Add API for setting BCH to specific layout (and restoring it back) used by ROM bootloader to be able to burn it in a proper way to NAND using nandbcb command. Signed-off-by: Igor Opaniuk <[email protected]> Signed-off-by: Anti Sullin <[email protected]> Tested-by: Max Krummenacher <[email protected]> Reviewed-by: Oleksandr Suvorov <[email protected]>
2019-11-03imx: support i.MX8QM ROM 7720 a1 boardOliver Graute
Add i.MX8QM ROM 7720a1 board support Boot log as below: U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Advantech iMX8QM Qseven series Board: ROM-7720-A1 4GB Build: SCFW 65afe5f6 Boot: SD2 DRAM: 4 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1 , eth-1: ethernet@5b050000 Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Peng Fan <[email protected]> Cc: Simon Glass <[email protected]> Cc: Ye Li <[email protected]> Cc: uboot-imx <[email protected]>
2019-11-03board/BuR/brppt2: initial commitHannes Schmelzer
This commit adds support for the brppt2 board. The board is based on the i.mx6 dual-lite SoC. Signed-off-by: Hannes Schmelzer <[email protected]>
2019-11-03imx8qxp: mek: add secure boot scriptPeng Fan
Add secure boot script, use ahab to verify image Signed-off-by: Peng Fan <[email protected]>
2019-11-03imx8qm: mek: add secure boot scriptPeng Fan
Add secure boot script, use ahab to verify image Signed-off-by: Peng Fan <[email protected]>
2019-11-03dt-bindings: import usb pdPeng Fan
Import usb pd bindings from Linux 5.4.0-rc1. This file will be included by imx8mm-evk.dts. Signed-off-by: Peng Fan <[email protected]>
2019-11-03opos6uldev: migrate to DM_VIDEOSébastien Szymanski
Migrate to DM_VIDEO, update the device tree and remove code that is no longer necessary. Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Sébastien Szymanski <[email protected]>
2019-11-03imx6ul: opos6ul: migrate to DM_ETHSébastien Szymanski
Migrate to DM_ETH and remove code that is no longer necessary. Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Sébastien Szymanski <[email protected]>
2019-11-03imx: update i.MX8MQ device treesPatrick Wildt
This updates the i.MX8MQ device trees and, necessarily, also the i.MX8MQ clock bindings. These are taken verbatim from from the Linux kernel version v5.4-rc2, which three small changes which were already part of the previous device tree: * Keep the PSCI reserved memory range * Keep the alias for ethernet, so that the MAC address can be set * Keep the modified #include for the IOMUXC pins Signed-off-by: Patrick Wildt <[email protected]> Acked-by: Peng Fan <[email protected]>
2019-11-03ARM: imx: Convert mccmon6 to use fitImage instead of uImage+DTBLukasz Majewski
This commit enabled support for fitImage on mccmon6 when we switch to DT/DTS (including falcon mode). Signed-off-by: Lukasz Majewski <[email protected]>
2019-11-03ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot properLukasz Majewski
This commit converts mccmon6's u-boot proper (in a single commit to avoid build breaks) to use solely DM/DTS. The DTS description of the mccmon6 has been ported from Linux kernel (v4.20, SHA1: 8fe28cb58bcb235034b64cbbb7550a8a43fd88be) Signed-off-by: Lukasz Majewski <[email protected]>
2019-11-03net: ti: cpsw: add support for standard eth "max-speed" dt propertyGrygorii Strashko
This patch adds support for standard Ethernet "max-speed" DT property to allow PHY link speed limitation. Signed-off-by: Grygorii Strashko <[email protected]>
2019-11-03spi: Add support for memory-mapped flashSimon Glass
On x86 platforms the SPI flash can be mapped into memory so that the contents can be read with normal memory accesses. Add a new SPI method to find the location of the SPI flash in memory. This differs from the existing device-tree "memory-map" mechanism in that the location can be discovered at run-time. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-11-03spl: Correct priority selection for image loadersSimon Glass
At present the name of the image comes first in the linker-list symbol used. This means that the name of the function sets the sort order, which is not the intention. Update it to put the boot-device type first, then the priority. This produces the expected behaviour. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-11-02cbfs: do not pack struct cbfs_cachenodeHeinrich Schuchardt
With the __packed attribute sandbox_defconfig cannot be compiled with GCC 9.2.1: fs/cbfs/cbfs.c: In function ‘file_cbfs_fill_cache’: fs/cbfs/cbfs.c:164:16: error: taking address of packed member of ‘struct cbfs_cachenode’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 164 | cache_tail = &new_node->next; | ^~~~~~~~~~~~~~~ struct cbfs_cachenode is only an internal structure. So let's rearrange the fields such that the structure is naturally packed and remove the __packed attribute. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Bin Meng <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2019-11-01Merge tag 'arc-fixes-for-2020.01-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-arc ARC fixes for v2020.01-rc2 The main change is move to DM_MMC of yet 2 another ARC boards: AXS101 & IoTDK. Among that we improve handling of stock-formatted SD-cards of high volume on EM SDP as well as introduction of reset driver for HSDK which is required for prepser reinitialization of some peripherals like USB etc.
2019-11-01ARC: HSDK: introduce reset driverEugeniy Paltsev
Introduce reset driver for Synopsys ARC HSDK SoC Signed-off-by: Eugeniy Paltsev <[email protected]> Signed-off-by: Alexey Brodkin <[email protected]>
2019-11-01Merge tag 'dm-pull-29oct19' of git://git.denx.de/u-boot-dmTom Rini
- Fix for patman with email addresses containing commas - Bootstage improvements for TPL, SPL - Various sandbox and dm improvements and fixes
2019-10-31drivers: phy: Handle gracefully NULL pointersJean-Jacques Hiblot
For some controllers PHYs can be optional. Handling NULL pointers without crashing nor failing, makes it easy to handle optional PHYs. Signed-off-by: Jean-Jacques Hiblot <[email protected]>
2019-10-31lib: errno: avoid error format-overflowHeinrich Schuchardt
In cmd/regulator.c an error occurs with GCC 9.2.1 if CONFIG_ERRNO_STR is not defined: cmd/regulator.c: In function ‘failure’: cmd/regulator.c:20:2: error: ‘%s’ directive argument is null [-Werror=format-overflow=] 20 | printf("Error: %d (%s)\n", ret, errno_str(ret)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘constraint’, inlined from ‘constraint’ at cmd/regulator.c:111:12: cmd/regulator.c:115:3: error: ‘%s’ directive argument is null [-Werror=format-overflow=] 115 | printf(" %s (err: %d)\n", errno_str(val), val); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ errno_str() should return a valid string instead of NULL if CONFIG_ERRNO_STR is not defined. Signed-off-by: Heinrich Schuchardt <[email protected]>
2019-10-31lib: time: Add microsecond timerMarek Vasut
Add get_timer_us(), which is useful e.g. when we need higher precision timestamps. Signed-off-by: Marek Vasut <[email protected]> Cc: Tom Rini <[email protected]> Cc: Simon Glass <[email protected]> [trini: Fixup arch/arm/mach-bcm283x/include/mach/timer.h] Signed-off-by: Tom Rini <[email protected]>
2019-10-31NVMe: do PCI enumerate before nvme scanPatrick Wildt
Make sure that the PCI busses are enumerated before trying to find a NVMe device. Signed-off-by: Patrick Wildt <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-10-31dfu: add callback for flush and initiated operationPatrick Delaunay
Add weak callback to allow board specific behavior - flush - initiated This patch prepare usage of DFU back end for communication with STM32CubeProgrammer on stm32mp1 platform with stm32prog command. Signed-off-by: Patrick Delaunay <[email protected]>
2019-10-31dfu: add DFU virtual backendPatrick Delaunay
Add a virtual DFU backend to allow board specific read and write (for OTP update for example). Acked-by: Lukasz Majewski <[email protected]> Signed-off-by: Patrick Delaunay <[email protected]>
2019-10-31dfu: add partition support for MTD backendPatrick Delaunay
Add the support of MTD partition for the MTD backend. The expected dfu_alt_info for one alternate on the mtd device : <name> part <part_id> <name> partubi <part_id> "partubi" also erase up to the end of the partition after write operation. For example: dfu_alt_info = "spl part 1;u-boot part 2; UBI partubi 3" U-Boot> dfu 0 mtd nand0 Acked-by: Lukasz Majewski <[email protected]> Signed-off-by: Patrick Delaunay <[email protected]>
2019-10-31dfu: add backend for MTD devicePatrick Delaunay
Add DFU backend for MTD device: allow to read and write on all MTD device (NAND, SPI-NOR, SPI-NAND,...) For example : > set dfu_alt_info "nand_raw raw 0x0 0x100000" > dfu 0 mtd nand0 This MTD backend provides the same level than dfu nand backend for NAND and dfu sf backend for SPI-NOR; So it can replace booth of them but it also add support of spi-nand. > set dfu_alt_info "nand_raw raw 0x0 0x100000" > dfu 0 mtd spi-nand0 The backend code is based on the "mtd" command introduced by commit 5db66b3aee6f ("cmd: mtd: add 'mtd' command") Signed-off-by: Patrick Delaunay <[email protected]>
2019-10-31dfu: prepare the support of multiple interfacePatrick Delaunay
Split the function dfu_config_entities with 2 new functions - dfu_alt_init - dfu_alt_add Signed-off-by: Patrick Delaunay <[email protected]>
2019-10-31dfu: sf: add partition support for nor backendPatrick Delaunay
Copy the partition support from NAND backend to SF, support part and partubi option. In case of ubi partition, erase the rest of the partition as it is mandatory for UBI. The added code is under compilation flag CONFIG_DFU_SF_PART activated by default. for example: U-Boot> env set dfu_alt_info "spl part 0 1;\ u-boot part 0 2;u-boot-env part 0 3;UBI partubi 0 4" U-Boot> dfu 0 sf 0:0:10000000:0 Signed-off-by: Patrick Delaunay <[email protected]>
2019-10-30Merge tag 'u-boot-clk-23Oct2019' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-clk - Add I2C clocks for i.MX6Q CCF driver - Fix check in clk_set_default_parents() - Managed API to get clock from device tree - Fixes for core clock code (including sandbox regression tests)
2019-10-30Merge branch '2019-10-28-azure-ci-support'Tom Rini
- Clean up Travis-CI slightly and then add support for Microsoft Azure pipelines, all from Bin Meng.
2019-10-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- H6 dts(i) sync (Clément) - H6 PIO (Icenowy) - Fix pll1 clock calculation (Stefan) - H6 dram, half DQ (Jernej) - A64 OLinuXino eMMC (Sunil)
2019-10-28linux/types.h: Surround 'struct ustat' with __linux__Bin Meng
'struct ustat' uses linux-specific typedefs to declare its memebers: __kernel_daddr_t and __kernel_ino_t. It is currently not used by any U-Boot codes, but when we build U-Boot tools for other platform like Windows, this becomes a problem. Let's surround it with __linux__. Signed-off-by: Bin Meng <[email protected]>
2019-10-28tools: image.h: Use portable uint32_t instead of linux-specific __be32Bin Meng
__be32 has Linux kernel specific __attribute__((bitwise)) which is not portable. Use uint32_t instead. Signed-off-by: Bin Meng <[email protected]>
2019-10-27fdt: Fix alignment issue when reading 64-bits properties from fdtJean-Jacques Hiblot
The FDT specification [0] gives a requirement of aligning properties on 32-bits. Make sure that the compiler is aware of this constraint when accessing 64-bits properties. [0]: https://github.com/devicetree-org/devicetree-specification/blob/master/source/flattened-format.rst Signed-off-by: Jean-Jacques Hiblot <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2019-10-27bootstage: Mark the start/end of TPL and SPL separatelySimon Glass
At present bootstage in TPL and SPL use the same ID so it is not possible to see the timing of each. Separate out the IDs and use the correct one depending on which phase we are at. Example output: Timer summary in microseconds (14 records): Mark Elapsed Stage 0 0 reset 224,787 224,787 TPL 282,248 57,461 end TPL 341,067 58,819 SPL 925,436 584,369 end SPL 931,710 6,274 board_init_f 1,035,482 103,772 board_init_r 1,387,852 352,370 main_loop 1,387,911 59 id=175 Accumulated time: 196 dm_r 8,300 dm_spl 14,139 dm_f 229,121 fsp-m 262,992 fsp-s Signed-off-by: Simon Glass <[email protected]>
2019-10-27dm: regmap: Fix mask in regmap_update_bits()Simon Glass
This function assumes that the 'val' parameter has no masked bits set. This is not defined by the function prototype though. Fix the function to mask the value and update the documentation. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Reviewed-by: Jean-Jacques Hiblot <[email protected]>
2019-10-27sandbox: test: Show hex values on failureSimon Glass
Quite a few tests use addresses or hex values for comparisons. Add hex output for test failures, e.g.: 0x55ca22fa == reg: Expected 0x55ca22fa (1439310586), got 0x55ea22fb (1441407739) Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-10-25Merge tag 'mips-pull-2019-10-25' of git://git.denx.de/u-boot-mipsTom Rini
- bmips: add BCRM NAND support for BCM6368, BCM6328, BCM6362 and BCM63268 SoCs - bmips: various small fixes - mtmips: add new drivers for clock, reset-controller and pinctrl - mtmips: add support for high speed UART - mtmips: update/enhance drivers for SPI and ethernet - mtmips: add support for MMC
2019-10-25Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DWC3 improvements - i.MX7 EHCI bugfix
2019-10-25Merge tag 'xilinx-for-v2020.01-part2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.01 part 2 common: - Fix manual relocation for repeatable commands arm: - Also clean up generated dtbos microblaze: - Add support for Manual relocation in crypto framework - Tune and align architecture bootm support zynq: - DT sync ups - Some defconfig updates - Remove empty board_early_init_f() zynqmp: - Clean firmware handing via drivers/firmware/ - DT/defconfig name alignments - DT cleanups with using firmware based clock driver - Some defconfig updates - Add IIO ina226 DT description - Tune zynqmp_psu_init_minimalize.sh script - Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216 versal: - Clean firmware handing via drivers/firmware/ - Add gpio support - Enable DT overlay/USB/CLK/FPGA - DT updates - Tune mini configuration spi: - gqspi - Remove unused headers
2019-10-25mips: mtmips: change baudrate table for all boardsWeijie Gao
This patch changes baudrate table for all boards preparing for using mtk highspeed uart driver. Signed-off-by: Weijie Gao <[email protected]>
2019-10-25reset: add reset controller driver for MediaTek MIPS platformWeijie Gao
This patch adds reset controller driver for MediaTek MIPS platform and header file for mt7628. Signed-off-by: Weijie Gao <[email protected]>
2019-10-25clk: add clock driver for MediaTek MT76x8 platformWeijie Gao
This patch adds a clock driver for MediaTek MT7628/7688 SoC. It provides clock gate control as well as getting clock frequency for CPU/SYS/XTAL and some peripherals. Signed-off-by: Weijie Gao <[email protected]>
2019-10-25bmips: correct name charactersÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
2019-10-25bmips: configs: switch to size definitionsÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <[email protected]> Reviewed-by: Daniel Schwierzeck <[email protected]>
2019-10-25mips: bmips: remove unneeded definitionsÁlvaro Fernández Rojas
These are no longer needed. Signed-off-by: Álvaro Fernández Rojas <[email protected]> Reviewed-by: Daniel Schwierzeck <[email protected]>
2019-10-25bmips: enable vr-3032u nand supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-07 10:08:38 +0000